- 05 Jan, 2005 4 commits
-
-
Richard Purdie authored
This allows one kernel build to support multiple machines. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
David Woodhouse <dwmw2@infradead.org>
-
Jorn Engel authored
Rewritten alternative driver by Gareth Bult and Jörn Engel. Signed-off-by: -
Jesper Juhl authored
I took a look at the cause for these warnings in the 2.6.10 kernel, drivers/mtd/maps/nettel.c:361: warning: assignment makes pointer from integer without a cast drivers/mtd/maps/nettel.c:395: warning: assignment makes pointer from integer without a cast and as far as I can see the casts in there (to unsigned long and back to void*) are completely unnessesary ('virt' in 'struct map_info' is a void __iomem *), and getting rid of those casts buys us a warning free build. Signed-off-by:Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
David Woodhouse authored
The patch below fixes a small but fatal bug in the code that handles non-buswidth-aligned writes. The problem is that the code used the same index in both map_word and buf, therefore putting the wrong words in the map_word that partially contains old data and partially contains new data. The result: corrupt data is being written. Signed-off-by:
Koen Martens <kmartens@sonologic.nl> Signed-off-by:
-
- 04 Jan, 2005 1 commit
-
-
David Woodhouse authored
into shinybook.infradead.org:/home/dwmw2/bk/mtd-2.6
-
- 03 Jan, 2005 35 commits
-
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
Signed-off-by:Russell King <rmk@arm.linux.org.uk>
-
Russell King authored
Signed-off-by: -
Liam Girdwood authored
Patch from Liam Girdwood This patch allows the PXA SSP port configuration to be changed without the need to close the port. Signed-off-by: Liam Girdwood Signed-off-by: Russell King
-
Russell King authored
This changes kernel domains to use domain 0 rather than domain 1, in preparation to supporting supersection mappings. Signed-off-by: -
Liam Girdwood authored
Patch from Liam Girdwood This patch adds the PXA27x SSP port 3 configuration register space (Phys 0x41900000) to the kernel memory table. Signed-off-by: Liam Girdwood Signed-off-by: Russell King
-
bk://bk.arm.linux.org.uk/linux-2.6-serialLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Lennart Poettering authored
From: Lennart Poettering Trivial patch against Linux 2.6.10 which adds PNP support for a certain kind of Rockwell 28.8/ISA modems.
-
bk://bk.arm.linux.org.uk/linux-2.6-mmcLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
Since all users of this have now been eliminated, we can eliminate the element itself. MMC host drivers now operate only on the scatter lists passed to them, rather than needing knowledge of block devices. Signed-off-by: -
Pierre Ossman authored
From: Pierre Ossman Cleanup that fixes a warning in the wbsd module.
-
Zwane Mwaikambo authored
noexec_setup runs too late to take any effect, so parse it earlier. Signed-off-by:
Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Heiko Carstens authored
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> sclp: core driver cleanup Details: - moved signal shutdown (quiesce) handling into a separate file - cleanup of SCLP core driver: . introduced driver states instead of bits . introduced request retry count and retry limit . sclp_add_request now returns an error code if a request couldn't be started . introduced separate request structure for init_mask requests to simplify code . request timer is now manually checked in sclp_sync_wait because timer interrupts are disabled in this context . removed busy timer - request timer now handles both cases . split up sclp_start_request into __sclp_start_request and sclp_process queue . removed sclp_error_message (unused) . introduced sclp_check_handler function to split up initial init mask test from standard init mask request processing . introduced sclp_deactivate and sclp_reactivate for simplified reboot event handling (and potential use in suspend/resume scenario) . added protection against multiple concurrent init mask calls - minor changes in SCLP core driver: . updated comments . renamed functions to be consistent with "function name starts with __ => needs lock" . renamed internal functions for consistency reasons . introduced inlined helper functions to simplify code . moved EXPORT_SYMBOL definitions next to function definition - changes in sclp console driver . removed callback recursion to prevent stack overflow - changes to CPI module . added check for sclp_add_request return code . changed printks to specify a message level - changes to generic sclp tty layer . removed timed buffer retry after error (timers may not work in some situations) . introduced return code for sclp_emit_buffer - changes to sclp tty driver . removed callback recursion - changes to sclp vt220 driver . removed callback recursion . removed timed buffer retry after error - modified sclp_init_mask to prevent problems with some compiler versions Signed-off-by:Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
From: Carsten Otte <cotte@de.ibm.com> - Fix codingstyle. Signed-off-by:
-
Heiko Carstens authored
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> From: Stefan Bader <shbader@de.ibm.com> character device driver changes: - tape: Correct module count usage. - 3270: Use mod_timer only when timer is pending. Signed-off-by:
-
Heiko Carstens authored
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> dasd driver changes: - Modify format analysis routine to use block size provided by on-disk label. - Search data structures when referencing use_diag/ro attribute values. - Correct return code checking when allocating memory. Signed-off-by:
-
Heiko Carstens authored
From: Ursula Braun-Krahl <braunu@de.ibm.com> From: Peter Tiedemann <ptiedem@de.ibm.com> From: Thomas Spatzier <tspat@de.ibm.com> From: Frank Pavlic <pavlic@de.ibm.com> - ctc: make sysfs attribute buffer early available. - ctc: remove memory leak for channel ccw struct. - qeth: remove redundant info card->info.ifname. - qeth: enable recovery with retries in qeth_hardsetup_card after unit check. - qeth: do not allow to set layer2 attribute on IQD devices. Signed-off-by:
-
Heiko Carstens authored
From: Cornelia Huck <cohuck@de.ibm.com> common i/o layer changes: - Cope with changed cdev->handler. - Split clearing of subchannels from reipl function and declare it in header. Signed-off-by:
-
Heiko Carstens authored
s390 core changes: - Disable pfault pseudo page faults before stopping a cpu. - Add exception table for diag10 instruction. - Move initialization of active_mm of idle task to smp_create_idle. - Regenerate default configuration. Signed-off-by:
-
Martin Schwidefsky authored
Remove the s390 version of setup_arg_pages32 function and use the generic setup_arg_pages function instead. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Gerd Knorr authored
Signed-off-by:
Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Gerd Knorr authored
Add sysfs support to the uml network driver. Also comment the eth_init function, I think that one is never ever needed as the devices are initialized when the underlying transport mechanism registeres. Signed-off-by:
-
Gerd Knorr authored
Signed-off-by:
-
Gerd Knorr authored
Fixup initialization order when creating the $HOME/.uml/<umid> directory and the files therein, also make the error messages more useful. Signed-off-by:
-
Gerd Knorr authored
export a missing symbol, IIRC xfs needs that one. Signed-off-by:
-
Jeff Dike authored
Remove a reference to an unused variable. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Jeff Dike authored
Before Bodo's signal fixes and my signal delivery rework, it was possible for a process to execute UML code by running the default signal restorer. This is no longer possible, so this check can be removed from the sanity test for UML accidentally tracing itself. Signed-off-by:
-
Jeff Dike authored
Add a declaration for ptrace_setfpregs Signed-off-by:
-
Jeff Dike authored
This implements using the new ptrace option SYSEMU_SINGLESTEP in UML (advanced sysemu) in SKAS and TT modes. To have a fast selection of the appropriate ptrace option to use next, a 2 dimensional arry is used and singlestepping() is modified to return 0,1 or 2: 0 = don't do singlestepping 1 = singlestep a syscall 2 = singlestep a "non syscall" instruction In do_syscall() writing of the syscall number is supressed, if the advanced sysemu is in use (that does it itself). Signed-off-by:Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by:
-
Jeff Dike authored
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com> This implements checking for the new ptrace option SYSEMU_SINGLESTEP (advanced sysemu) and allows the values 0,1,2 for /proc/sysemu, if advanced sysemu is available: 0 = don't use sysemu 1 = use sysemu, but don't use advanced sysemu 2 = use sysemu and advanced sysemu Signed-off-by:
-
Jeff Dike authored
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com> In call to update_process_times() set parameter user correctly. (was from for SKAS). Signed-off-by:
-
Jeff Dike authored
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Restoring of current->blocked in sys_sigreturn is wrong. The first (long ) of the mask correctly is fetched from sc->oldmask. The further longs again come from there, but correctly should be taken from frame->extramask. Signed-off-by:
-
Jeff Dike authored
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Usage of SYSEMU in TT mode is modified, so that always the same method is used in do_syscall as has been used before in ptrace(PTRACE_SYSCALL/SYSEMU, ...) Signed-off-by:
-
Jeff Dike authored
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com> This patch fixes compilation on 2.4 hosts by not relying on macros from 2.6 host kernel headers in one userspace file. It's about AT_SYSINFO_* macros. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it> Signed-off-by:
-
Jeff Dike authored
From: Bodo Stroesser <bstroesser@fujitsu-siemens.com> My older patch, that sets TIF_SIGPENDING after an ptrace-interception in syscall_trace() is wrong. Some syscalls want to be called without any signal pending. If a signal is pending on syscall-entry, they immediately return with -ERESTARTNOINTR. Thus, on return to user, the pending signals can be processed and the kernel will lower eip by 2 to have the syscall restarted after that. Since my change sets TIF_SIGPENDING on the entry and exit interception, stracing such a syscall looped! Try "strace ls" to see what happens. Fix: set TIF_SIGPENDING on the exit interception only. This avoids the loop and is enough for security. Signed-off-by:
-
