- 07 Sep, 2016 40 commits
-
-
Wanpeng Li authored
commit 44496922 upstream. The following commit: 9642d18e ("nohz: Affine unpinned timers to housekeepers")' intended to affine unpinned timers to housekeepers: unpinned timers(full dynaticks, idle) => nearest busy housekeepers(otherwise, fallback to any housekeepers) unpinned timers(full dynaticks, busy) => nearest busy housekeepers(otherwise, fallback to any housekeepers) unpinned timers(houserkeepers, idle) => nearest busy housekeepers(otherwise, fallback to itself) However, the !idle_cpu(i) && is_housekeeping_cpu(cpu) check modified the intention to: unpinned timers(full dynaticks, idle) => any housekeepers(no mattter cpu topology) unpinned timers(full dynaticks, busy) => any housekeepers(no mattter cpu topology) unpinned timers(housekeepers, idle) => any busy cpus(otherwise, fallback to any housekeepers) This patch fixes it by checking if there are busy housekeepers nearby, otherwise falls to any housekeepers/itself. After the patch: unpinned timers(full dynaticks, idle) => nearest busy housekeepers(otherwise, fallback to any housekeepers) unpinned timers(full dynaticks, busy) => nearest busy housekeepers(otherwise, fallback to any housekeepers) unpinned timers(housekeepers, idle) => nearest busy housekeepers(otherwise, fallback to itself) Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> [ Fixed the changelog. ] Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 'commit 9642d18e ("nohz: Affine unpinned timers to housekeepers")' Link: http://lkml.kernel.org/r/1462344334-8303-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Zijlstra authored
commit 173be9a1 upstream. Mike reports: Roughly 10% of the time, ltp testcase getrusage04 fails: getrusage04 0 TINFO : Expected timers granularity is 4000 us getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)! getrusage04 0 TINFO : utime: 0us; stime: 179us getrusage04 0 TINFO : utime: 3751us; stime: 0us getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us: And tracked it down to the case where the task simply doesn't get _any_ [us]time ticks. Update the code to assume all rtime is utime when we lack information, thus ensuring a task that elides the tick gets time accounted. Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Tested-by:
-
Lucas Stach authored
commit 34276bb0 upstream. The called of_graph_get_next_endpoint() already decrements the refcount of the prev node, so it is wrong to do it again in the calling function. Use the for_each_endpoint_of_node() helper to interate through the endpoint OF nodes, which already does the right thing and simplifies the code a bit. Fixes: 8ccd0d0c (of: add helper for getting endpoint node of specific identifiers) Reported-by:
David Jander <david@protonic.nl> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Caesar Wang authored
commit 78ec79bf upstream. SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Acked-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Felix Fietkau authored
commit 6b07d9ca upstream. The code currently assumes that buffered multicast PS frames don't have a pending ACK frame for tx status reporting. However, hostapd sends a broadcast deauth frame on teardown for which tx status is requested. This can lead to the "Have pending ack frames" warning on module reload. Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Stefan Haberland authored
commit 9ba333dc upstream. When a device is in a status where CIO has killed all I/O by itself the interrupt for a clear request may not contain an irb to determine the clear function. Instead it contains an error pointer -EIO. This was ignored by the DASD int_handler leading to a hanging device waiting for a clear interrupt. Handle -EIO error pointer correctly for requests that are clear pending and treat the clear as successful. Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Emmanouil Maroudas authored
commit 993f88f1 upstream. Fix typo in edac_inc_ue_error() to increment ue_noinfo_count instead of ce_noinfo_count. Signed-off-by:
Emmanouil Maroudas <emmanouil.maroudas@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 4275be63 ("edac: Change internal representation to work with layers") Link: http://lkml.kernel.org/r/1461425580-5898-1-git-send-email-emmanouil.maroudas@gmail.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Agrawal, Nitesh-kumar authored
commit 8cf43455 upstream. In the function amd_gpio_irq_enable() and amd_gpio_direction_input(), remove the code which is setting the default de-bounce time to 2.75ms. The driver code shall use the same settings as specified in BIOS. Any default assignment impacts TouchPad behaviour when the LevelTrig is set to EDGE FALLING. Reviewed-by:
Ken Xue <Ken.Xue@amd.com> Signed-off-by:
Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 5bc0a116 upstream. The disable_bypass cmdline option changes the SMMUv3 driver to put down faulting stream table entries by default, as opposed to bypassing transactions from unconfigured devices. In this mode of operation, it is entirely expected to see aborting entries in the stream table if and when we come to installing a valid translation, so don't trigger a BUG() as a result of misdiagnosing these entries as stream table corruption. Fixes: 48ec83bc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Tested-by:
Robin Murphy <robin.murphy@arm.com> Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit aea2037e upstream. In the unlikely event of a global command queue error, the ARM SMMUv3 driver attempts to convert the problematic command into a CMD_SYNC and resume the command queue. Unfortunately, this code is pretty badly broken: 1. It uses the index into the error string table as the CMDQ index, so we probably read the wrong entry out of the queue 2. The arguments to queue_write are the wrong way round, so we end up writing from the queue onto the stack. These happily cancel out, so the kernel is likely to stay alive, but the command queue will probably fault again when we resume. This patch fixes the error handling code to use the correct queue index and write back the CMD_SYNC to the faulting entry. Fixes: 48ec83bc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reported-by:
Diwakar Subraveti <Diwakar.Subraveti@arm.com> Signed-off-by:
-
Robin Murphy authored
commit 3ec60043 upstream. Due to the limitations of having to wait until we see a device's DMA restrictions before we know how we want an IOVA domain initialised, there is a window for error if a DMA ops domain is allocated but later freed without ever being used. In that case, init_iova_domain() was never called, so calling put_iova_domain() from iommu_put_dma_cookie() ends up trying to take an uninitialised lock and crashing. Make things robust by skipping the call unless the IOVA domain actually has been initialised, as we probably should have done from the start. Fixes: 0db2e5d1 ("iommu: Implement common IOMMU ops for DMA mapping") Reported-by:
Nate Watterson <nwatters@codeaurora.org> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Mathias Nyman authored
commit 0caf6b33 upstream. In most cases the devices with the speed set to USB_SPEED_SUPER_PLUS are handled like regular SuperSpeed devices. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Robert Deliën authored
commit 6977495c upstream. Ivium Technologies uses the FTDI VID with custom PIDs for their line of electrochemical interfaces and the PalmSens they developed for PalmSens BV. Signed-off-by:
Robert Delien <robert@delien.nl> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Sheng-Hui J. Chu authored
commit ae34d12c upstream. BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0 UART/FIFO IC. To support BCM920706V2_EVAL dev board for WICED development on Linux. Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading ftdi_sio for this board. Signed-off-by:
Sheng-Hui J. Chu <s.jeffrey.chu@gmail.com> Signed-off-by:
-
Daniele Palmas authored
commit 01d7956b upstream. This patch adds a set of compositions for Telit LE920A4. Compositions in short are: 0x1207: tty + tty 0x1208: tty + adb + tty + tty 0x1211: tty + adb + ecm 0x1212: tty + adb 0x1213: ecm + tty 0x1214: tty + adb + ecm + tty telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211 and 0x1214 due to the same interfaces positions. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Lubomir Rintel authored
commit cf1b1803 upstream. The device has four interfaces; the three serial ports ought to be handled by this driver: 00 Diagnostic interface serial port 01 NMEA device serial port 02 Mass storage (sd card) 03 Modem serial port The other product ids listed in the Windows driver are present already. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Alexey Klimov authored
commit 647024a7 upstream. udriver struct allocated by kzalloc() will not be freed if usb_register() and next calls fail. This patch fixes this by adding one more step with kfree(udriver) in error path. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Mathias Nyman authored
commit f1f6d9a8 upstream. Remove the hcd after checking for the xhci last quirks, not before. This caused a hang on a Alpine Ridge xhci based maching which remove the whole xhci controller when unplugging the last usb device Signed-off-by:
-
Jim Lin authored
commit 88716a93 upstream. After a device is disconnected, xhci_stop_device() will be invoked in xhci_bus_suspend(). Also the "disconnect" IRQ will have ISR to invoke xhci_free_virt_device() in this sequence. xhci_irq -> xhci_handle_event -> handle_cmd_completion -> xhci_handle_cmd_disable_slot -> xhci_free_virt_device If xhci->devs[slot_id] has been assigned to NULL in xhci_free_virt_device(), then virt_dev->eps[i].ring in xhci_stop_device() may point to an invlid address to cause kernel panic. virt_dev = xhci->devs[slot_id]; : if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) [] Unable to handle kernel paging request at virtual address 00001a68 [] pgd=ffffffc001430000 [] [00001a68] *pgd=000000013c807003, *pud=000000013c807003, *pmd=000000013c808003, *pte=0000000000000000 [] Internal error: Oops: 96000006 [#1] PREEMPT SMP [] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G U [] Workqueue: pm pm_runtime_work [] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti: ffffffc0bc0ec000 [] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4 This issue is found when running with realtek ethernet device (0bda:8153). Signed-off-by:
Jim Lin <jilin@nvidia.com> Signed-off-by:
-
Mathias Nyman authored
commit 33be1265 upstream. Fix "Command completion event does not match command" errors by always handling the command ring stopped events. The command ring stopped event is generated as a result of aborting or stopping the command ring with a register write. It is not caused by a command in the command queue, and thus won't have a matching command in the comman list. Solve it by handling the command ring stopped event before checking for a matching command. In most command time out cases we abort the command ring, and get a command ring stopped event. The events command pointer will point at the current command ring dequeue, which in most cases matches the timed out command in the command list, and no error messages are seen. If we instead get a command aborted event before the command ring stopped event, the abort event will increse the command ring dequeue pointer, and the following command ring stopped events command pointer will point at the next, not yet queued command. This case triggered the error message Signed-off-by:
-
Mathieu Laurendeau authored
commit 327b21da upstream. Fix io submissions failing with ENODEV. Signed-off-by:
Mathieu Laurendeau <mat.lau@laposte.net> Fixes: 7fe3976e ("gadget: switch ep_io_operations to ->read_iter/->write_iter") Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 7442e6db upstream. The udc->eps[] array has USB_MAX_ENDPOINTS elements so > should be >=. Fixes: 3948f0e0 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alan Stern authored
commit aed9d65a upstream. Erroneous or malicious endpoint descriptors may have non-zero bits in reserved positions, or out-of-bounds values. This patch helps prevent these from causing problems by bounds-checking the wMaxPacketValue entries in endpoint descriptors and capping the values at the maximum allowed. This issue was first discovered and tests were conducted by Jake Lamberson <jake.lamberson1@gmail.com>, an intern working for Rosie Hall. Signed-off-by:
roswest <roswest@cisco.com> Tested-by:
-
Yoshihiro Shimoda authored
commit 700aa7ff upstream. This patch fixes an issue that isochronous transfer's data is possible to be lost as a workaround. Since this driver uses a workqueue to start the dmac, the transfer is possible to be delayed when system load is high. Fixes: 6e4b74e4 ("usb: renesas: fix scheduling in atomic context bug") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 9ab967e6 upstream. This patch fixes an issue that unexpected BRDY interruption happens when the usb_ep_{enable,disable}() are called with different direction. In this case, the driver will cause the following message: renesas_usbhs e6590000.usb: irq_ready run_error 1 : -16 This issue causes the followings: 1) A pipe is enabled as transmission 2) The pipe sent a data 3) The pipe is disabled and re-enabled as reception. 4) The pipe got a queue Since the driver doesn't clear the BRDYSTS flags after 2) above, the issue happens. If we add such clearing the flags into the driver, the code will become complicate. So, this patch clears the BRDYSTS flag of reception in usbhsg_ep_enable() to avoid complicate. Signed-off-by:
-
Alan Stern authored
commit 07d316a2 upstream. The locking in hub_activate() is not adequate to provide full mutual exclusion with hub_quiesce(). The subroutine locks the hub's usb_interface, but the callers of hub_quiesce() (such as hub_pre_reset() and hub_event()) hold the lock to the hub's usb_device. This patch changes hub_activate() to make it acquire the same lock as those other routines. Signed-off-by:
-
Alan Stern authored
commit ca5cbc8b upstream. The early-exit pathway in hub_activate, added by commit e50293ef ("USB: fix invalid memory access in hub_activate()") needs improvement. It duplicates code that is already present at the end of the subroutine, and it neglects to undo the effect of a usb_autopm_get_interface_no_resume() call. This patch fixes both problems by making the early-exit pathway jump directly to the end of the subroutine. It simplifies the code at the end by merging two conditionals that actually test the same condition although they appear different: If type < HUB_INIT3 then type must be either HUB_INIT2 or HUB_INIT, and it can't be HUB_INIT because in that case the subroutine would have exited earlier. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Viresh Kumar authored
commit 6bb47e8a upstream. Memory leak and unbalanced reference count: If the hub gets disconnected while the core is still activating it, this can result in leaking memory of few USB structures. This will happen if we have done a kref_get() from hub_activate() and scheduled a delayed work item for HUB_INIT2/3. Now if hub_disconnect() gets called before the delayed work expires, then we will cancel the work from hub_quiesce(), but wouldn't do a kref_put(). And so the unbalance. kmemleak reports this as (with the commit e50293ef backported to 3.10 kernel with other changes, though the same is true for mainline as well): unreferenced object 0xffffffc08af5b800 (size 1024): comm "khubd", pid 73, jiffies 4295051211 (age 6482.350s) hex dump (first 32 bytes): 30 68 f3 8c c0 ff ff ff 00 a0 b2 2e c0 ff ff ff 0h.............. 01 00 00 00 00 00 00 00 00 94 7d 40 c0 ff ff ff ..........}@.... backtrace: [<ffffffc0003079ec>] create_object+0x148/0x2a0 [<ffffffc000cc150c>] kmemleak_alloc+0x80/0xbc [<ffffffc000303a7c>] kmem_cache_alloc_trace+0x120/0x1ac [<ffffffc0006fa610>] hub_probe+0x120/0xb84 [<ffffffc000702b20>] usb_probe_interface+0x1ec/0x298 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d5308>] __device_attach+0x28/0x4c [<ffffffc0005d3164>] bus_for_each_drv+0x78/0xac [<ffffffc0005d4ee0>] device_attach+0x6c/0x9c [<ffffffc0005d42b8>] bus_probe_device+0x28/0xa0 [<ffffffc0005d23a4>] device_add+0x324/0x604 [<ffffffc000700fcc>] usb_set_configuration+0x660/0x6cc [<ffffffc00070a350>] generic_probe+0x44/0x84 [<ffffffc000702914>] usb_probe_device+0x54/0x74 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d5308>] __device_attach+0x28/0x4c Deadlocks: If the hub gets disconnected early enough (i.e. before INIT2/INIT3 are finished and the init_work is still queued), the core may call hub_quiesce() after acquiring interface device locks and it will wait for the work to be cancelled synchronously. But if the work handler is already running in parallel, it may try to acquire the same interface device lock and this may result in deadlock. Fix both the issues by removing the call to cancel_delayed_work_sync(). Fixes: e50293ef ("USB: fix invalid memory access in hub_activate()") Reported-by:
Manu Gautam <mgautam@codeaurora.org> Signed-off-by:
-
Mathias Nyman authored
commit 8a1b2725 upstream. Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by:
-
Felipe Balbi authored
commit c7de5734 upstream. When using SG lists, we would end up setting request->actual to: num_mapped_sgs * (request->length - count) Let's fix that up by incrementing request->actual only once. Reported-by:
Brian E Rogers <brian.e.rogers@intel.com> Signed-off-by:
-
Heikki Krogerus authored
commit 4491ed50 upstream. Intel Kabylake PCH has the same DWC3 than Intel Sunrisepoint. Add the new ID to the supported devices. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
commit 53958751 upstream. In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling into usb_sg_cancel(). usb_sg_cancel() will do nothing and return directly if req->status has been set to a non-zero value. This will cause driver hang whenever transfer time out is triggered. This patch fixes this issue. It could be backported to stable kernel with version later than v3.15. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Suggested-by:
-
Marc Ohlf authored
commit bc337b51 upstream. In ehci_turn_off_all_ports() all EHCI port registers are cleared to zero. On some hardware, this can lead to an system hang, when ehci_port_power() accesses the already cleared registers. This patch changes the order of cleanup. First call ehci_port_power() which respects the current bits in port status registers and afterwards cleanup the hard way by setting everything to zero. Signed-off-by:
Marc Ohlf <ohlf@mkt-sys.de> Acked-by:
-
Horia Geantă authored
commit 2fdea258 upstream. To be able to generate shared descriptors for AEAD, the authentication size needs to be known. However, there is no imposed order of calling .setkey, .setauthsize callbacks. Thus, in case authentication size is not known at .setkey time, defer it until .setauthsize is called. The authsize != 0 check was incorrectly removed when converting the driver to the new AEAD interface. Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Horia Geantă authored
commit 1d2d87e8 upstream. There are a few things missed by the conversion to the new AEAD interface: 1 - echainiv(authenc) encrypt shared descriptor The shared descriptor is incorrect: due to the order of operations, at some point in time MATH3 register is being overwritten. 2 - buffer used for echainiv(authenc) encrypt shared descriptor Encrypt and givencrypt shared descriptors (for AEAD ops) are mutually exclusive and thus use the same buffer in context state: sh_desc_enc. However, there's one place missed by s/sh_desc_givenc/sh_desc_enc, leading to errors when echainiv(authenc(...)) algorithms are used: DECO: desc idx 14: Header Error. Invalid length or parity, or certain other problems. While here, also fix a typo: dma_mapping_error() is checking for validity of sh_desc_givenc_dma instead of sh_desc_enc_dma. Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by:
-
Russell King authored
commit a0118c8b upstream. Since 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)"), the AF_ALG interface requires userspace to provide a key to any algorithm that has a setkey method. However, the non-HMAC algorithms are not keyed, so setting a key is unnecessary. Fix this by removing the setkey method from the non-keyed hash algorithms. Fixes: 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Marc Zyngier authored
commit f3b0946d upstream. Bharat Kumar Gogada reported issues with the generic MSI code, where the end-point ended up with garbage in its MSI configuration (both for the vector and the message). It turns out that the two MSI paths in the kernel are doing slightly different things: generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI And it turns out that end-points are allowed to latch the content of the MSI configuration registers as soon as MSIs are enabled. In Bharat's case, the end-point ends up using whatever was there already, which is not what you want. In order to make things converge, we introduce a new MSI domain flag (MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set, this flag forces the programming of the end-point as soon as the MSIs are allocated. A consequence of this is that we have an extra activate in irq_startup, but that should be without much consequence. tglx: - Several people reported a VMWare regression with PCI/MSI-X passthrough. It turns out that the patch also cures that issue. - We need to have a look at the MSI disable interrupt path, where we write the msg to all zeros without disabling MSI in the PCI device. Is that correct? Fixes: 52f518a3 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts" Reported-and-tested-by:
Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Reported-and-tested-by:
Foster Snowhill <forst@forstwoof.ru> Reported-by:
Matthias Prager <linux@matthiasprager.de> Reported-by:
Jason Taylor <jason.taylor@simplivity.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
commit b6140914 upstream. No user and we definitely don't want to grow one. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-2-git-send-email-hch@lst.deSigned-off-by:
-
Andrey Ryabinin authored
commit dad22328 upstream. Commit e41f501d ("vmlinux.lds: account for destructor sections") added '.text.exit' to EXIT_TEXT which is discarded at link time by default. This breaks compilation of UML: `.text.exit' referenced in section `.fini_array' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o): defined in discarded section `.text.exit' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o) Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT sections in .exit.text. Fixes: e41f501d ("vmlinux.lds: account for destructor sections") Reported-by:
Stefan Traby <stefan@hello-penguin.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Hoan Tran authored
commit 2324d154 upstream. When CPPC fails to request a PCC channel, the CPC data is freed and cpc_desc_ptr points to the invalid data. Avoid this issue by moving the cpc_desc_ptr assignment after the PCC channel request. Signed-off-by:
Hoan Tran <hotran@apm.com> Acked-by:
Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
