GMA500 did it the old way and it's been on the TODO list to fix. Current kernels
now blow up if we use the old way so we'd better do the work !
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

HDMI 1.3 defines single link clocks up to 340 Mhz.
Refine the current dual link checks to only enable
dual link for DVI > 165 Mhz or HDMI > 340 Mhz if the
hw supports HDMI 1.3 (DCE3+).

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=44755Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

We were previously just checking for audio.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

dig transmitter control table only has ENABLE/DISABLE actions
on DCE4.1/DCE5.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=44955Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Needs to happen earlier in the mode set.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

We really only need to set it up once on init or resume
rather than on every mode set.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Return a number of bytes read in radeon_atrm_get_bios_chunk() and
properly check this value in radeon_atrm_get_bios().
If radeon_atrm_get_bios_chunk() read less bytes then were requested,
it means that it finished reading bios data.

Prior to this patch, condition in radeon_atrm_get_bios() was always
equivalent to "if (ATRM_BIOS_PAGE <= 0)", so it was always false,
thus radeon_atrm_get_bios() was trying to read past the bios data
wasting boot time.

On my lenovo ideapad u455 laptop this patch drops bios reading time
from ~5.5s to ~1.5s.
Signed-off-by: Igor Murzov <e-mail@date.by>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

At a boot time I observed following bug:

 BUG: unable to handle kernel paging request at ffff8800a4244000
 IP: [<ffffffff81275b5b>] memcpy+0xb/0x120
 PGD 1816063 PUD 1fe7d067 PMD 1ff9f067 PTE 80000000a4244160
 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
 CPU 0
 Modules linked in: btusb bluetooth brcmsmac brcmutil crc8 cordic b43 radeon(+)
  mac80211 cfg80211 ttm ohci_hcd drm_kms_helper rfkill drm ssb agpgart mmc_core
  sp5100_tco video battery ac thermal processor rtc_cmos thermal_sys snd_hda_codec_hdmi
  joydev snd_hda_codec_conexant button bcma pcmcia snd_hda_intel snd_hda_codec
  snd_hwdep snd_pcm shpchp pcmcia_core k8temp snd_timer atl1c snd psmouse hwmon
  i2c_piix4 i2c_algo_bit soundcore evdev i2c_core ehci_hcd sg serio_raw snd_page_alloc
  loop btrfs

 Pid: 1008, comm: modprobe Not tainted 3.3.0-rc1 #21 LENOVO 20046                           /AMD CRB
 RIP: 0010:[<ffffffff81275b5b>]  [<ffffffff81275b5b>] memcpy+0xb/0x120
 RSP: 0018:ffff8800aa72db00  EFLAGS: 00010246
 RAX: ffff8800a4150000 RBX: 0000000000001000 RCX: 0000000000000087
 RDX: 0000000000000000 RSI: ffff8800a4244000 RDI: ffff8800a4150bc8
 RBP: ffff8800aa72db78 R08: 0000000000000010 R09: ffffffff8174bbec
 R10: ffffffff812ee010 R11: 0000000000000001 R12: 0000000000001000
 R13: 0000000000010000 R14: ffff8800a4140000 R15: ffff8800aaba1800
 FS:  00007ff9a3bd4720(0000) GS:ffff8800afa00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff8800a4244000 CR3: 00000000a9c18000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process modprobe (pid: 1008, threadinfo ffff8800aa72c000, task ffff8800aa0e4000)
 Stack:
  ffffffffa04e7c7b 0000000000000001 0000000000010000 ffff8800aa72db28
  ffffffff00000001 0000000000001000 ffffffff8113cbef 0000000000000020
  ffff8800a4243420 ffff880000000002 ffff8800aa72db08 ffff8800a9d42000
 Call Trace:
  [<ffffffffa04e7c7b>] ? radeon_atrm_get_bios_chunk+0x8b/0xd0 [radeon]
  [<ffffffff8113cbef>] ? kmalloc_order_trace+0x3f/0xb0
  [<ffffffffa04a9298>] radeon_get_bios+0x68/0x2f0 [radeon]
  [<ffffffffa04c7a30>] rv770_init+0x40/0x280 [radeon]
  [<ffffffffa047d740>] radeon_device_init+0x560/0x600 [radeon]
  [<ffffffffa047ef4f>] radeon_driver_load_kms+0xaf/0x170 [radeon]
  [<ffffffffa043cdde>] drm_get_pci_dev+0x18e/0x2c0 [drm]
  [<ffffffffa04e7e95>] radeon_pci_probe+0xad/0xb5 [radeon]
  [<ffffffff81296c5f>] local_pci_probe+0x5f/0xd0
  [<ffffffff81297418>] pci_device_probe+0x88/0xb0
  [<ffffffff813417aa>] ? driver_sysfs_add+0x7a/0xb0
  [<ffffffff813418d8>] really_probe+0x68/0x180
  [<ffffffff81341be5>] driver_probe_device+0x45/0x70
  [<ffffffff81341cb3>] __driver_attach+0xa3/0xb0
  [<ffffffff81341c10>] ? driver_probe_device+0x70/0x70
  [<ffffffff813400ce>] bus_for_each_dev+0x5e/0x90
  [<ffffffff8134172e>] driver_attach+0x1e/0x20
  [<ffffffff81341298>] bus_add_driver+0xc8/0x280
  [<ffffffff813422c6>] driver_register+0x76/0x140
  [<ffffffff812976d6>] __pci_register_driver+0x66/0xe0
  [<ffffffffa043d021>] drm_pci_init+0x111/0x120 [drm]
  [<ffffffff8133c67a>] ? vga_switcheroo_register_handler+0x3a/0x60
  [<ffffffffa0229000>] ? 0xffffffffa0228fff
  [<ffffffffa02290ec>] radeon_init+0xec/0xee [radeon]
  [<ffffffff810002f2>] do_one_initcall+0x42/0x180
  [<ffffffff8109d8d2>] sys_init_module+0x92/0x1e0
  [<ffffffff815407a9>] system_call_fastpath+0x16/0x1b
 Code: 58 2a 43 50 88 43 4e 48 83 c4 08 5b c9 c3 66 90 e8 cb fd ff ff eb
  e6 90 90 90 90 90 90 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48
  a5 89 d1 f3 a4 c3 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c
 RIP  [<ffffffff81275b5b>] memcpy+0xb/0x120
  RSP <ffff8800aa72db00>
 CR2: ffff8800a4244000
 ---[ end trace fcffa1599cf56382 ]---

Call to acpi_evaluate_object() not always returns 4096 bytes chunks,
on my system it can return 2048 bytes chunk, so pass the length of
retrieved chunk to memcpy(), not the length of the recieving buffer.
Signed-off-by: Igor Murzov <e-mail@date.by>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Interrupts only work with MSIs.
https://bugs.freedesktop.org/show_bug.cgi?id=37679Reported-by: Dmitry Podgorny <pasis.uax@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

In sis_driver_load(), the only use of 'ret' is as the return value
from the function, unfortunately it is never initialized, so the
function just returns garbage when it succeeds.
To fix that, remove the variable and just return 0 directly on success.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/accounting, proc: Fix /proc/stat interrupts sum

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
  x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
  x86/kprobes: Fix typo transferred from Intel manual

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
  x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
  x86/kconfig: Move the ZONE_DMA entry under a menu
  x86/UV2: Add accounting for BAU strong nacks
  x86/UV2: Ack BAU interrupt earlier
  x86/UV2: Remove stale no-resources test for UV2 BAU
  x86/UV2: Work around BAU bug
  x86/UV2: Fix BAU destination timeout initialization
  x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
  x86: Get rid of dubious one-bit signed bitfield

gpio bug fixes for v3.3

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: Use correct offset for gpio initialization
  gpio/it8761e: Restrict it8761e gpio driver to x86.
  gpio-ml-ioh: cleanup __iomem annotation usage
  gpio-ml-ioh: cleanup NULL pointer checking
  gpio-pch: cleanup __iomem annotation usage
  gpio-pch: cleanup NULL pointer checking

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  vfs: remove printk from set_nlink()
  wake up s_wait_unfrozen when ->freeze_fs fails

In checkin

  303395ac x86: Generate system call tables and unistd_*.h from tables

the feature macros in <asm/unistd.h> were unified between 32 and 64
bits.  Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was
inadvertently dropped.
Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  MPILIB: Add a missing ENOMEM check

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname
is not going to be NULL, TYVM...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Permit key_serial() to be called with a const key pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

Replace the rcu_assign_pointer() calls with rcu_assign_keypointer().
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

Fix ima_policy.c sparse "warning: dereference of noderef expression"
message, by accessing cred->uid using current_cred().

Changelog v1:
- Change __cred to just cred (based on David Howell's comment)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

Randy Dunlap reports that we get

  arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value'
  arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here

when compiling UML for x86-64.

Stephen Rothwell root-caused it and says:

 "Caused by commit d7e7528b ("Audit: push audit success and retcode
  into arch ptrace.h") (another patch that was never in linux-next :-().

  This file now needs protection against double inclusion."

so let's do as the man says.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Analyzed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a missing ENOMEM check.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ib_srpt: Initial SRP Target merge for v3.3-rc1

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Set additional sense length field in sense data
  target: Remove legacy device status check from transport_execute_tasks
  target: Remove __transport_execute_tasks() for each processing context
  target: Remove extra se_device->execute_task_lock access in fast path
  target: Drop se_device TCQ queue_depth usage from I/O path
  target: Fix possible NULL pointer with __transport_execute_tasks
  target: Remove TFO->check_release_cmd() fabric API caller
  tcm_fc: Convert ft_send_work to use target_submit_cmd
  target: Add target_submit_cmd() for process context fabric submission
  target: Make target_put_sess_cmd use target_release_cmd_kref
  target: Set response format in INQUIRY response
  target: tcm_mod_builder: small fixups
  Documentation/target: Fix tcm_mod_builder.py build breakage
  target: remove overagressive ____cacheline_aligned annoations
  tcm_loop: bump max_sectors
  target/configs: remove trailing newline from udev_path and alias
  iscsi-target: fix chap identifier simple_strtoul usage
  target: remove useless casts
  target: simplify target_check_cdb_and_preempt
  target: Move core_scsi3_check_cdb_abort_and_preempt
  ...

This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.

APEI has patches resulting from testing on real hardware.

Plus other random fixes.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  ACPI processor: Remove unneeded cpuidle_unregister_driver call
  intel idle: Make idle driver more robust
  intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
  ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
  intel_idle: remove redundant local_irq_disable() call
  ACPI processor: Fix error path, also remove sysdev link
  ACPI: processor: fix acpi_get_cpuid for UP processor
  intel_idle: fix API misuse
  ACPI APEI: Convert atomicio routines
  ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Fix possible alignment issues with GAS 'address' references
  ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
  ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
  ACPI: Store SRAT table revision
  ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
  ACPI, Record ACPI NVS regions
  ACPI, APEI, EINJ, Refine the fix of resource conflict
  ...

This patch fixes an (ACPI S3) suspend regression introduced in commit
68d6e671 ("tpm: Introduce function to poll for result of self test")
and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers
active.

The suspend problem occurred if the TPM was disabled and/or deactivated
and therefore the TPM_PCRRead checking the result of the (asynchronous)
self test returned an error code which then caused the tpm_tis driver to
become inactive and this then seemed to have negatively influenced the
suspend support by the tpm_infineon driver...  Besides that the tpm_tis
drive may stay active even if the TPM is disabled and/or deactivated.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The type of 'make_request_fn' changed in 5a7bbad2 ("block: remove
support for bio remapping from ->make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:

  drivers/block/nvme.c: In function 'nvme_alloc_ns':
  drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
  include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'

It's benign, but the warning is annoying.
Reported-by: Stephen Rothwell <sfr@canb.auug.org>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix these warnings:

  drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default]
  drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
  drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default]

And this build error:

  ERROR: "xen_biovec_phys_mergeable" [drivers/block/nvme.ko] undefined!
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux:
  i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor
  i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH
  i2c-eg20t: modified the setting of transfer rate.
  i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number
  i2c: OMAP: Add DT support for i2c controller
  I2C: OMAP: NACK without STP
  I2C: OMAP: correct SYSC register offset for OMAP4

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits)
  [media] as3645a: Fix compilation by including slab.h
  [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c
  [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c
  [media] ds3000: using logical && instead of bitwise &
  [media] v4l2-ctrls: make control names consistent
  [media] DVB: dib0700, add support for Nova-TD LEDs
  [media] DVB: dib0700, add corrected Nova-TD frontend_attach
  [media] DVB: dib0700, separate stk7070pd initialization
  [media] DVB: dib0700, move Nova-TD Stick to a separate set
  [media] : add MODULE_FIRMWARE to dib0700
  [media] DVB-CORE: remove superfluous DTV_CMDs
  [media] s5p-jpeg: adapt to recent videobuf2 changes
  [media] s5p-g2d: fixed a bug in controls setting function
  [media] s5p-mfc: Fix volatile controls setup
  [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test
  [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test
  [media] s5p-fimc: Fix incorrect control ID assignment
  [media] dvb_frontend: Don't call get_frontend() if idle
  [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T
  [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters
  ...

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: Wait for WM8993 FLL to stabilise
  ASoC: core - Free platform DAPM context at platform removal.
  ASoC: dapm - Fix check for codec context in dapm_power_widgets().
  ASoC: sgtl5000: update author email address
  ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.

Using the correct gpio offset for setting the initial value
of gpio when setting output direction.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

SCSI updates on 20120118

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits)
  [SCSI] libfc: remove redundant timer init for fcp
  [SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c
  [SCSI] libfc: Declare local functions static
  [SCSI] fcoe: fix regression on offload em matching function for initiator/target
  [SCSI] qla4xxx: Update driver version to 5.02.00-k12
  [SCSI] qla4xxx: Cleanup modinfo display
  [SCSI] qla4xxx: Update license
  [SCSI] qla4xxx: Clear the RISC interrupt bit during FW init
  [SCSI] qla4xxx: Added error logging for firmware abort
  [SCSI] qla4xxx: Disable generating pause frames in case of FW hung
  [SCSI] qla4xxx: Temperature monitoring for ISP82XX core.
  [SCSI] megaraid: fix sparse warnings
  [SCSI] sg: convert to kstrtoul_from_user()
  [SCSI] don't change sdev starvation list order without request dispatched
  [SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state
  [SCSI] isci: fix start OOB
  [SCSI] isci: fix io failures while wide port links are coming up
  [SCSI] isci: allow more time for wide port targets
  [SCSI] isci: enable wide port targets
  [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode.
  ...

* git://git.infradead.org/users/willy/linux-nvme: (105 commits)
  NVMe: Set number of queues correctly
  NVMe: Version 0.8
  NVMe: Set queue flags correctly
  NVMe: Simplify nvme_unmap_user_pages
  NVMe: Mark the end of the sg list
  NVMe: Fix DMA mapping for admin commands
  NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT
  NVMe: Merge the nvme_bio and nvme_prp data structures
  NVMe: Change nvme_completion_fn to take a dev
  NVMe: Change get_nvmeq to take a dev instead of a namespace
  NVMe: Simplify completion handling
  NVMe: Update Identify Controller data structure
  NVMe: Implement doorbell stride capability
  NVMe: Version 0.7
  NVMe: Don't probe namespace 0
  Fix calculation of number of pages in a PRP List
  NVMe: Create nvme_identify and nvme_get_features functions
  NVMe: Fix memory leak in nvme_dev_add()
  NVMe: Fix calls to dma_unmap_sg
  NVMe: Correct sg list setup in nvme_map_user_pages
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  inetpeer: initialize ->redirect_genid in inet_getpeer()
  net: fix NULL-deref in WARN() in skb_gso_segment()
  net: WARN if skb_checksum_help() is called on skb requiring segmentation
  caif: Remove bad WARN_ON in caif_dev
  caif: Fix typo in Vendor/Product-ID for CAIF modems
  bnx2x: Disable AN KR work-around for BCM57810
  bnx2x: Remove AutoGrEEEn for BCM84833
  bnx2x: Remove 100Mb force speed for BCM84833
  bnx2x: Fix PFC setting on BCM57840
  bnx2x: Fix Super-Isolate mode for BCM84833
  net: fix some sparse errors
  net: kill duplicate included header
  net: sh-eth: Fix build error by the value which is not defined
  net: Use device model to get driver name in skb_gso_segment()
  bridge: BH already disabled in br_fdb_cleanup()
  net: move sock_update_memcg outside of CONFIG_INET
  mwl8k: Fixing Sparse ENDIAN CHECK warning
  ...