Allow a master interface to be specified as one of the parameters when
creating a new interface via rtnl_newlink.  Previously this would
require invoking interface creation, waiting for it to complete, and
then separately binding that new interface to a master.

In particular, this is used when creating a macvlan child interface for
VRRP in a VRF configuration, allowing the interface creator to specify
directly what master interface should be inherited by the child,
without having to deal with asynchronous complications and potential
race conditions.
Signed-off-by: Theuns Verwoerd <theuns.verwoerd@alliedtelesis.co.nz>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2017-02-01

1) Some typo fixes, from Alexander Alemayhu.

2) Don't acquire state lock in get_mtu functions.
   The only rece against a dead state does not matter.
   From Florian Westphal.

3) Remove xfrm4_state_fini, it is unused for more than
   10 years. From Florian Westphal.

4) Various rcu usage improvements. From Florian Westphal.

5) Properly handle crypto arrors in ah4/ah6.
   From Gilad Ben-Yossef.

6) Try to avoid skb linearization in esp4 and esp6.

7) The esp trailer is now set up in different places,
   add a helper for this.

8) With the upcomming usage of gro_cells in IPsec,
   a gro merged skb can have a secpath. Drop it
   before freeing or reusing the skb.

9) Add a xfrm dummy network device for napi. With
   this we can use gro_cells from within xfrm,
   it allows IPsec GRO without impact on the generic
   networking code.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Rafał Miłecki says:

====================
net-next: use one struct bgmac & add PHY support

This patchset adds support for initializing PHY using PHY subsystem.
It's required e.g. for wireless access point devices that use bgmac
supported Ethernet device connected to some external PHY.

Implementing this required accessing phydev in bcma specific code which
wasn't possible with core code allocating struct bgmac on its own. This
is why I needed to modify alloc_etherdev usage first.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for using bgmac with PHYs supported by standalone PHY
drivers. Having any PHY initialization in bgmac is hacky and shouldn't
be extended but rather removed if anyone has hardware to test it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding struct bcma_mdio was a workaround for bcma code not having access
to the struct bgmac used in the core code. Now we don't duplicate this
struct we can just use it internally in bcma code.

This simplifies code & allows access to all bgmac driver details from
all places in bcma code.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

So far were were allocating struct bgmac in 3 places: platform code,
bcma code and shared bgmac_enet_probe function. The reason for this was
bgmac_enet_probe:
1) Requiring early-filled struct bgmac
2) Calling alloc_etherdev on its own in order to use netdev_priv later

This solution got few drawbacks:
1) Was duplicating allocating code
2) Required copying early-filled struct
3) Resulted in platform/bcma code having access only to unused struct

Solve this situation by simply extracting some probe code into the new
bgmac_alloc function.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 7318166c ("net: dsa: bcm_sf2: Add support for
ethtool::rxnfc") added a new object to build: bcm_sf2_cfp.o, but in
doing so, we essentially just built this object and no longer bcm_sf2.o.

Fix this by creating a module named bcm-sf2.ko which links in bcm_sf2.o
and bcm_sf2_cfp.o.

Fixes: 7318166c ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change t4fw_version.h to update latest firmware version
number 1.16.26.0.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

under memory pressure 'ethtool -S' command may warn:
[ 2374.385195] ethtool: page allocation failure: order:4, mode:0x242c0c0
[ 2374.405573] CPU: 12 PID: 40211 Comm: ethtool Not tainted
[ 2374.423071] Call Trace:
[ 2374.423076]  [<ffffffff8148cb29>] dump_stack+0x4d/0x64
[ 2374.423080]  [<ffffffff811667cb>] warn_alloc_failed+0xeb/0x150
[ 2374.423082]  [<ffffffff81169cd3>] ? __alloc_pages_direct_compact+0x43/0xf0
[ 2374.423084]  [<ffffffff8116a25c>] __alloc_pages_nodemask+0x4dc/0xbf0
[ 2374.423091]  [<ffffffffa0023dc2>] ? cmd_exec+0x722/0xcd0 [mlx5_core]
[ 2374.423095]  [<ffffffff811b3dcc>] alloc_pages_current+0x8c/0x110
[ 2374.423097]  [<ffffffff81168859>] alloc_kmem_pages+0x19/0x90
[ 2374.423099]  [<ffffffff81186e5e>] kmalloc_order_trace+0x2e/0xe0
[ 2374.423101]  [<ffffffff811c0084>] __kmalloc+0x204/0x220
[ 2374.423105]  [<ffffffff816c269e>] dev_ethtool+0xe4e/0x1f80
[ 2374.423106]  [<ffffffff816b967e>] ? dev_get_by_name_rcu+0x5e/0x80
[ 2374.423108]  [<ffffffff816d6926>] dev_ioctl+0x156/0x560
[ 2374.423111]  [<ffffffff811d4c68>] ? mem_cgroup_commit_charge+0x78/0x3c0
[ 2374.423117]  [<ffffffff8169d542>] sock_do_ioctl+0x42/0x50
[ 2374.423119]  [<ffffffff8169d9c3>] sock_ioctl+0x1b3/0x250
[ 2374.423121]  [<ffffffff811f0f42>] do_vfs_ioctl+0x92/0x580
[ 2374.423123]  [<ffffffff8100222b>] ? do_audit_syscall_entry+0x4b/0x70
[ 2374.423124]  [<ffffffff8100287c>] ? syscall_trace_enter_phase1+0xfc/0x120
[ 2374.423126]  [<ffffffff811f14a9>] SyS_ioctl+0x79/0x90
[ 2374.423127]  [<ffffffff81002bb0>] do_syscall_64+0x50/0xa0
[ 2374.423129]  [<ffffffff817e19bc>] entry_SYSCALL64_slow_path+0x25/0x25

~1160 mlx5 counters ~= order 4 allocation which is unlikely to succeed
under memory pressure. Convert them to vzalloc() as ethtool_get_regs() does.
Also take care of drivers without counters similar to
commit 67ae7cf1 ("ethtool: Allow zero-length register dumps again")
and reduce warn_on to warn_on_once.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Tested-by: Pavel Belous <pavel.s.belous@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

encap_type should be checked to see if it is greater or equal to
the size of array map to fix an off-by-one array size check. This
fixes an array overrun read as detected by static analysis by
CoverityScan, CID#1398883 ("Out-of-bounds-read")

Fixes: 9b410801 ("sfc: insert catch-all filters for encapsulated traffic")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
sh_eth: E-DMAC interrupt mask cleanups

   Here's a set of 3 patches against DaveM's 'net-next.git' repo. The main goal
of this set is to stop using the bare numbers for the E-DMAC interrupt masks.

[1/3] sh_eth: rename EESIPR bits
[2/3] sh_eth: add missing EESIPR bits
[3/3] sh_eth: stop using bare numbers for EESIPR values
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now  that we  have almost all EESIPR bits declared (and those  that are
still not are most probably reserved anyway) we can at last replace the
bare  numbers used for 'sh_eth_cpu_data::eesipr_value' initializers with
the bit names ORed together...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Renesas SH77{34|63} manuals  describe more EESIPR bits than the current
driver. Declare the new bits with the end goal of using the bit names
instead of the bare numbers  for  the 'sh_eth_cpu_data::eesipr_value'
initializers...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the  commit  b0ca2a21 ("sh_eth: Add support of SH7763 to sh_eth")
the *enum* declaring the EESIPR bits (interrupt mask) went out of sync with
the *enum* declaring the EESR bits (interrupt status) WRT  bit naming  and
formatting. I'd like to restore the consistency by using EESIPR as the bit
name prefix, renaming the *enum* to EESIPR_BIT, and (finally) renaming the
bits according to the available  Renesas SH77{34|63} manuals; additionally,
reconstruct  couple names using  the EESR bit declaration above...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Gregory CLEMENT says:

====================
dsa: Add support for the ethernet switch on the ESPRESSObin

This set of patches adds support for the Marvell Ethernet Topaz switch
family (88E6141/88E6341) which is found on the ESPRESSObin. With this
series the network is usable on this board.

As usual, I rebased the series on the very last net-next/master. In
this series there is no temperature support which need some patches
form Andrew Lunn.

As soon as Andrew Lunn will post the needed patch I will send a patch
to enable the temperature support.

Changelog:

v6 -> v7:
- rebased on net-next/master (5b8784aa)
- Fixed the wrong age time coeff from 15s to 3.75s.
- Remove support for temperature sensor

v5 -> v6:
- rebased on net-next/master (d140199a)
- Fix the redundant check on mv88e6xxx_6341_family (reported by Julia
  Lawall)
- Add support for the 88E6141
- Move support for temperature sensor in the phy part
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The Marvell 88E6341 device is single-chip, 6-port Ethernet switch with
four integrated 10/100/1000Mbps Ethernet transceivers and one high speed
SerDes interfaces.

It belongs to the Topaz family and unlike the 88E6341 it does not have
a TCAM.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Marvell 88E6341 device is single-chip, 6-port Ethernet switch with
four integrated 10/100/1000Mbps Ethernet transceivers and one high speed
SerDes interfaces. It is partially compatible with switches of family
88E6352 and switches of family 88E6390.

This commit adds an initial support for this switch by describing its
capabilities to the driver and introducing a new family.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some Marvell ethernet switches have internal ethernet transceivers with
hardcoded phy addresses. These addresses can be greater than the number
of ports or its value might be different than the associated port number.
This is for example the case for MV88E6341 that has 6 ports and internal
Port 1 to Port4 PHYs mapped at SMI addresses from 0x11 to 0x14.

This commits fixes the issue by removing the condition in MDIO callbacks.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Say we got really unlucky and these failed on the last iteration, then
it could lead to a use after free bug.

Fixes: cd6851f3 ("smc: remote memory buffers (RMBs)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: Port mirroring support

This patch series adds support for port mirroring in the two
Broadcom switch drivers. The major part of the functional are actually with
the plumbing between tc and the drivers.

Changes in v5:

- Added Jiri's Reviewed-by tag to first patch
- rebase against latest net-next/master after bcm_sf2 CFP series

Changes in v4:

- rebased against latest net-next/master after Vivien's changes

Changes in v3:

- removed multiline comments from added structures
- simplify error handling in dsa_slave_add_cls_matchall

Changes in v2:

- fixed filter removal logic to disable the ingress or egress mirroring
  when there are no longer ports being monitored in ingress or egress

- removed a stray list_head in dsa_port structure that is not used

Tested using the two iproute2 examples:

      tc qdisc  add dev eth1 handle ffff: ingress
      tc filter add dev eth1 parent ffff:           \
               matchall skip_sw                      \
               action mirred egress mirror           \
               dev eth2
      tc qdisc add dev eth1 handle 1: root prio
      tc filter add dev eth1 parent 1:               \
               matchall skip_sw                       \
               action mirred egress mirror            \
               dev eth2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We can use b53_mirror_add and b53_mirror_del because the Starfighter 2
is register compatible in that specific case.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuring port mirroring through the cls_matchall
classifier. We do a full ingress or egress capture towards the capture
port. Future improvements could include leveraging the divider to allow
less frames to be captured, as well as matching specific MAC DA/SA.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add definitions for the different Roboswitch registers relevant for
ingress and egress mirroring.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add necessary plumbing at the slave network device level to have switch
drivers implement ndo_setup_tc() and most particularly the cls_matchall
classifier. We add support for two switch operations:

port_add_mirror and port_del_mirror() which configure, on a per-port
basis the mirror parameters requested from the cls_matchall classifier.

Code is largely borrowed from the Mellanox Spectrum switch driver.
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 misc improvements

This patchset contains several improvements and cleanups
from the team to the mlx4 Eth and core drivers.

Series generated against net-next commit:
4e8f2fc1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Thanks,
Tariq.

v3:
* Patch 6/9: forgot to actually update the commit message in v2, now it is.

v2:
* Patch 1/9: used EOPNOTSUPP and not ENOTSUPP.
* Patch 3/9: dropped, to be submitted separately in the future.
* Patch 6/9: updated commit message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure pptx/pprx mask flag is set using new fields upon set port
request. In addition, move this code into a helper function for better
code readability.
Signed-off-by: Shaker Daibes <shakerd@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure MTU mask flag is set using new field upon set port
request. In addition, move this code into a helper function for better
code readability.
Signed-off-by: Shaker Daibes <shakerd@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When starting the port, driver will inform Firmware about the actual MTU
which does not include implicit headers, such as FCS or VLAN tags.
Signed-off-by: Shaker Daibes <shakerd@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This feature will allow the user to disable auto negotiation
on the port for mlx4 devices while setting the speed is limited
to 1GbE speeds.
Other speeds will not be accepted in autoneg off mode.

This functionality is permitted providing that the firmware
is compatible with this feature.
The above is determined by querying a new dedicated capability
bit in the device.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid reading num_tc directly from struct net_device, but use
the helper function netdev_get_num_tc.

Fixes: bc6a4744 ("net/mlx4_en: num cores tx rings for every UP")
Fixes: f5b6345b ("net/mlx4_en: User prio mapping gets corrupted when changing number of channels")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to aid debugging of functions that take a resource but
don't put it, add the last function name that successfully grabbed
this resource.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device revision field returned by the NodeInfo MAD is incorrect
on ConnectX3 devices.

This patch is driver side handling to complete a FW fix added at 2.11.1172.
INIT_HCA - bit at offset 0x0C.12 is set to 1 so that FW will report
correct device revision.

Older FW versions won't be affected from turning on that bit,
no capability bit is needed.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conform the following warning:
WARNING: ENOSYS means 'invalid syscall nr' and nothing else.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nothing about lwt state requires a device reference, so remove the
input argument.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

napi_complete_done() allows to opt-in for gro_flush_timeout,
added back in linux-3.19, commit 3b47d303
("net: gro: add a per device gro flush timer")

This allows for more efficient GRO aggregation without
sacrifying latencies.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Packets arriving in a VRF currently are delivered to UDP sockets that
aren't bound to any interface. TCP defaults to not delivering packets
arriving in a VRF to unbound sockets. IP route lookup and socket
transmit both assume that unbound means using the default table and
UDP applications that haven't been changed to be aware of VRFs may not
function correctly in this case since they may not be able to handle
overlapping IP address ranges, or be able to send packets back to the
original sender if required.

So add a sysctl, udp_l3mdev_accept, to control this behaviour with it
being analgous to the existing tcp_l3mdev_accept, namely to allow a
process to have a VRF-global listen socket. Have this default to off
as this is the behaviour that users will expect, given that there is
no explicit mechanism to set unmodified VRF-unaware application into a
default VRF.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: bcm_sf2: CFP support

This patch series adds support for the Broadcom Compact Field Processor (CFP)
which is a classification and matching engine built into most Broadcom switches.

We support that using ethtool::rxnfc because it allows all known uses cases from
the users I support to work, and more importantly, it allows the selection of a
target rule index, which is later used by e.g: offloading hardware, this is an
essential feature that I could not find being supported with cls_* for instance.

Thanks!

Changes in v3:

- rebased against latest net-next/master after Vivien's changes

Changes in v2:

- fixed modular builds reported by kbuild test robot
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for configuring classification rules using the
ethtool::rxnfc API.  This is useful to program the switch's CFP/TCAM to
redirect specific packets to specific ports/queues for instance. For
now, we allow any kind of IPv4 5-tuple matching.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add Compact Field Processor definitions for the Broadcom Starfighter 2
and compatible versions of the switch.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>