An error occurred fetching the project authors.
- 03 Jul, 2019 9 commits
-
-
Paolo Abeni authored
This avoids an indirect call per syscall for common ipv6 transports Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
After the previous patch we have ipv{6,4} variants for {recv,send}msg, we should use the generic _INET ICW variant to call into the proper build-in. This also allows dropping the now unused and rather ugly _INET4 ICW macro v1 -> v2: - use ICW macro to declare inet6_{recv,send}msg - fix a couple of checkpatch offender in the code context Signed-off-by: -
Paolo Abeni authored
This will simplify indirect call wrapper invocation in the following patch. No functional change intended, any - out-of-tree - IPv6 user of inet_{recv,send}msg can keep using the existing functions. SCTP code still uses the existing version even for ipv6: as this series will not add ICW for SCTP, moving to the new helper would not give any benefit. The only other in-kernel user of inet_{recv,send}msg is pvcalls_conn_back_read(), but psvcalls explicitly creates only IPv4 socket, so no need to update that code path, too. v1 -> v2: drop inet6_{recv,send}msg declaration from header file, prefer ICW macro instead Signed-off-by: -
Paolo Abeni authored
The same code is replicated verbatim in multiple places, and the next patches will introduce an additional user for it. Factor out a helper and use it where appropriate. No functional change intended. Signed-off-by:
-
Colin Ian King authored
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The variable tpd_req is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Sudarsana Reddy Kalluru authored
This patch adds driver changes to detect/timestamp the unicast PTP packets. Changes from previous version: ------------------------------- v2: Defined a macro for unicast ptp param mask. Please consider applying this to "net-next". Signed-off-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Catherine Sullivan authored
u64_stats_fetch_begin needs to initialize start. Signed-off-by:
Catherine Sullivan <csully@google.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Mahesh Bandewar authored
dev_init_scheduler() and dev_activate() expect the caller to hold RTNL. Since we don't want blackhole device to be initialized per ns, we are initializing at init. [ 3.855027] Call Trace: [ 3.855034] dump_stack+0x67/0x95 [ 3.855037] lockdep_rcu_suspicious+0xd5/0x110 [ 3.855044] dev_init_scheduler+0xe3/0x120 [ 3.855048] ? net_olddevs_init+0x60/0x60 [ 3.855050] blackhole_netdev_init+0x45/0x6e [ 3.855052] do_one_initcall+0x6c/0x2fa [ 3.855058] ? rcu_read_lock_sched_held+0x8c/0xa0 [ 3.855066] kernel_init_freeable+0x1e5/0x288 [ 3.855071] ? rest_init+0x260/0x260 [ 3.855074] kernel_init+0xf/0x180 [ 3.855076] ? rest_init+0x260/0x260 [ 3.855078] ret_from_fork+0x24/0x30 Fixes: 4de83b88 ("loopback: create blackhole net device similar to loopack.") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
- 02 Jul, 2019 31 commits
-
-
Petr Machata authored
Before mlxsw_sp1_ptp_packet_finish() sends the packet back, it validates whether the corresponding port is still valid. However the condition is incorrect: when mlxsw_sp_port == NULL, the code dereferences the port to compare it to skb->dev. The condition needs to check whether the port is present and skb->dev still refers to that port (or else is NULL). If that does not hold, bail out. Add a pair of parentheses to fix the condition. Fixes: d92e4e6e ("mlxsw: spectrum: PTP: Support timestamping on Spectrum-1") Reported-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Heiner Kallweit authored
It was reported that the GPD MicroPC is broken in a way that no valid MAC address can be read from the network chip. The vendor driver deals with this by assigning a random MAC address as fallback. So let's do the same. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
This reverts commit 759d0957. The patch was based on a misunderstanding. As Al Viro pointed out [0] it's simply wrong on big endian. So let's revert it. [0] https://marc.info/?t=156200975600004&r=1&w=2Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Martin Blumenstingl authored
Commit 760f1dc2 ("net: stmmac: add sanity check to device_property_read_u32_array call") introduced error checking of the device_property_read_u32_array() call in stmmac_mdio_reset(). This results in the following error when the "snps,reset-delays-us" property is not defined in devicetree: invalid property snps,reset-delays-us This sanity check made sense until commit 84ce4d0f ("net: stmmac: initialize the reset delay array") ensured that there are fallback values for the reset delay if the "snps,reset-delays-us" property is absent. That was at the cost of making that property mandatory though. Drop the sanity check for device_property_read_u32_array() and thus make the "snps,reset-delays-us" property optional again (avoiding the error message while loading the stmmac driver with a .dtb where the property is absent). Fixes: 760f1dc2 ("net: stmmac: add sanity check to device_property_read_u32_array call") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Eric Dumazet authored
A bonding master can be up while best_slave is NULL. [12105.636318] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1 [12105.648984] IP: bond_select_active_slave+0x125/0x250 [12105.653977] PGD 0 P4D 0 [12105.656572] Oops: 0000 [#1] SMP PTI [12105.660487] gsmi: Log Shutdown Reason 0x03 [12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last unloaded: kvm_intel] [12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2 [12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1 [12105.685700] mlx4_en: eth2: Link Up (linkstate) [12105.724452] Workqueue: bond0 bond_mii_monitor [12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250 [12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246 [12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX: 0000000000000000 [12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI: ffff8c62b03c6000 [12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09: ffff8c517d387600 [12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12: 0000000000000000 [12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15: 0000000000000000 [12105.775748] FS: 0000000000000000(0000) GS:ffff8c62bfa40000(0000) knlGS:0000000000000000 [12105.783892] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4: 00000000001626f0 [12105.796976] Call Trace: [12105.799446] [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0 [12105.805317] [<ffffffffabd42643>] process_one_work+0x143/0x370 [12105.811225] [<ffffffffabd42c7a>] worker_thread+0x4a/0x360 [12105.816761] [<ffffffffabd48bc5>] kthread+0x105/0x140 [12105.821865] [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380 [12105.827757] [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0 [12105.834266] [<ffffffffac600241>] ret_from_fork+0x51/0x60 Fixes: e2a7420d ("bonding/main: convert to using slave printk macros") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
John Sperbeck <jsperbeck@google.com> Cc: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Xin Long authored
Both tipc_udp_enable and tipc_udp_disable are called under rtnl_lock, ub->ubsock could never be NULL in tipc_udp_disable and cleanup_bearer, so remove the check. Also remove the one in tipc_udp_enable by adding "free" label. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Stefano Brivio authored
In commit ee28906f ("ipv4: Dump route exceptions if requested") I added a counter of per-node dumped routes (including actual routes and exceptions), analogous to the existing counter for dumped nodes. Dumping exceptions means we need to also keep track of how many routes are dumped for each node: this would be just one route per node, without exceptions. When netlink strict checking is not enabled, we dump both routes and exceptions at the same time: the RTM_F_CLONED flag is not used as a filter. In this case, the per-node counter 'i_fa' is incremented by one to track the single dumped route, then also incremented by one for each exception dumped, and then stored as netlink callback argument as skip counter, 's_fa', to be used when a partial dump operation restarts. The per-node counter needs to be increased by one also when we skip a route (exception) due to a previous non-zero skip counter, because it needs to match the existing skip counter, if we are dumping both routes and exceptions. I missed this, and only incremented the counter, for regular routes, if the previous skip counter was zero. This means that, in case of a mixed dump, partial dump operations after the first one will start with a mismatching skip counter value, one less than expected. This means in turn that the first exception for a given node is skipped every time a partial dump operation restarts, if netlink strict checking is not enabled (iproute < 5.0). It turns out I didn't repeat the test in its final version, commit de755a85 ("selftests: pmtu: Introduce list_flush_ipv4_exception test case"), which also counts the number of route exceptions returned, with iproute2 versions < 5.0 -- I was instead using the equivalent of the IPv6 test as it was before commit b964641e ("selftests: pmtu: Make list_flush_ipv6_exception test more demanding"). Always increment the per-node counter by one if we previously dumped a regular route, so that it matches the current skip counter. Fixes: ee28906f ("ipv4: Dump route exceptions if requested") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
René van Dorst authored
No reason to error out on a MT7621 device with DDR2 memory when non TRGMII mode is selected. Only MT7621 DDR2 clock setup is not supported for TRGMII mode. But non TRGMII mode doesn't need any special clock setup. Signed-off-by:
René van Dorst <opensource@vdorst.com> Signed-off-by:
-
David Howells authored
With gcc 4.1: net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’: net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function Indeed, if the first jump to the send_fragmentable label is made, and the address family is not handled in the switch() statement, ret will be used uninitialized. Fix this by BUG()'ing as is done in other places in rxrpc where internal support for future address families will need adding. It should not be possible to reach this normally as the address families are checked up-front. Fixes: 5a924b89 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by:David Howells <dhowells@redhat.com> Signed-off-by:
-
Colin Ian King authored
The variable r is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Xue Chaojing authored
This patch removes standard netdev stats in ethtool -S. Suggested-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Xue Chaojing <xuechaojing@huawei.com> Signed-off-by:
-
Jose Abreu authored
We support many speeds and it doesn't make much sense to list them all in the Kconfig. Let's just call it Multi-Gigabit. Suggested-by:
Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
David S. Miller authored
Catherine Sullivan says: ==================== Add gve driver This patch series adds the gve driver which will support the Compute Engine Virtual NIC that will be available in the future. v2: - Patch 1: - Remove gve_size_assert.h and use static_assert instead. - Loop forever instead of bugging if the device won't reset - Use module_pci_driver - Patch 2: - Use be16_to_cpu in the RX Seq No define - Remove unneeded ndo_change_mtu - Patch 3: - No Changes - Patch 4: - Instead of checking netif_carrier_ok in ethtool stats, just make sure v3: - Patch 1: - Remove X86 dep - Patch 2: - No changes - Patch 3: - No changes - Patch 4: - Remove unneeded memsets in ethtool stats v4: - Patch 1: - Use io[read|write]32be instead of [read|write]l(cpu_to_be32()) - Explicitly add padding to gve_adminq_set_driver_parameter - Use static where appropriate - Patch 2: - Use u64_stats_sync - Explicity add padding to gve_adminq_create_rx_queue - Fix some enianness typing issues found by kbuild - Use static where appropriate - Remove unused variables - Patch 3: - Use io[read|write]32be instead of [read|write]l(cpu_to_be32()) - Patch 4: - Use u64_stats_sync - Use static where appropriate Warnings reported by: Reported-by:
Julia Lawall <julia.lawall@lip6.fr> ==================== Signed-off-by:
-
Catherine Sullivan authored
Add support for the following ethtool commands: ethtool -s|--change devname [msglvl N] [msglevel type on|off] ethtool -S|--statistics devname ethtool -i|--driver devname ethtool -l|--show-channels devname ethtool -L|--set-channels devname ethtool -g|--show-ring devname ethtool --reset devname Signed-off-by:
Sagi Shahar <sagis@google.com> Signed-off-by:
Jon Olson <jonolson@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Luigi Rizzo <lrizzo@google.com> Signed-off-by:
-
Catherine Sullivan authored
Add support for the workqueue to handle management interrupts and support for resets. Signed-off-by:
-
Catherine Sullivan authored
Add support for passing traffic. Signed-off-by:
-
Catherine Sullivan authored
Add a driver framework for the Compute Engine Virtual NIC that will be available in the future. At this point the only functionality is loading the driver. Signed-off-by:
-
David S. Miller authored
Mahesh Bandewar says: ==================== blackhole device to invalidate dst When we invalidate dst or mark it "dead", we assign 'lo' to dst->dev. First of all this assignment is racy and more over, it has MTU implications. The standard dev MTU is 1500 while the Loopback MTU is 64k. TCP code when dereferencing the dst don't check if the dst is valid or not. TCP when dereferencing a dead-dst while negotiating a new connection, may use dst device which is 'lo' instead of using the correct device. Consider the following scenario: A SYN arrives on an interface and tcp-layer while processing SYNACK finds a dst and associates it with SYNACK skb. Now before skb gets passed to L3 for processing, if that dst gets "dead" (because of the virtual device getting disappeared & then reappeared), the 'lo' gets assigned to that dst (lo MTU = 64k). Let's assume the SYN has ADV_MSS set as 9k while the output device through which this SYNACK is going to go out has standard MTU of 1500. The MTU check during the route check passes since MIN(9K, 64K) is 9k and TCP successfully negotiates 9k MSS. The subsequent data packet; bigger in size gets passed to the device and it won't be marked as GSO since the assumed MTU of the device is 9k. This either crashes the NIC and we have seen fixes that went into drivers to handle this scenario. 8914a595 ('bnx2x: disable GSO where gso_size is too big for hardware') and 2b16f048 ('net: create skb_gso_validate_mac_len()') and with those fixes TCP eventually recovers but not before few dropped segments. Well, I'm not a TCP expert and though we have experienced these corner cases in our environment, I could not reproduce this case reliably in my test setup to try this fix myself. However, Michael Chan <michael.chan@broadcom.com> had a setup where these fixes helped him mitigate the issue and not cause the crash. The idea here is to not alter the data-path with additional locks or smb()/rmb() barriers to avoid racy assignments but to create a new device that has really low MTU that has .ndo_start_xmit essentially a kfree_skb(). Make use of this device instead of 'lo' when marking the dst dead. First patch implements the blackhole device and second patch uses it in IPv4 and IPv6 stack while the third patch is the self test that ensures the sanity of this device. v1->v2 fixed the self-test patch to handle the conflict v2 -> v3 fixed Kconfig text/string. ==================== Signed-off-by:
-
Mahesh Bandewar authored
Since this is not really a device with all capabilities, this test ensures that it has *enough* to make it through the data path without causing unwanted side-effects (read crash!). Signed-off-by:
-
Mahesh Bandewar authored
Use blackhole_netdev instead of 'lo' device with lower MTU when marking dst "dead". Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Mahesh Bandewar authored
Create a blackhole net device that can be used for "dead" dst entries instead of loopback device. This blackhole device differs from loopback in few aspects: (a) It's not per-ns. (b) MTU on this device is ETH_MIN_MTU (c) The xmit function is essentially kfree_skb(). and (d) since it's not registered it won't have ifindex. Lower MTU effectively make the device not pass the MTU check during the route check when a dst associated with the skb is dead. Signed-off-by:
-
Hariprasad Kelam authored
Remove unneeded memset as alloc_etherdev is using kvzalloc which uses __GFP_ZERO flag Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by:
-
David S. Miller authored
Ilias Apalodimas says: ==================== net: netsec: Add XDP Support This is a respin of https://www.spinics.net/lists/netdev/msg526066.html Since page_pool API fixes are merged into net-next we can now safely use it's DMA mapping capabilities. First patch changes the buffer allocation from napi/netdev_alloc_frag() to page_pool API. Although this will lead to slightly reduced performance (on raw packet drops only) we can use the API for XDP buffer recycling. Another side effect is a slight increase in memory usage, due to using a single page per packet. The second patch adds XDP support on the driver. There's a bunch of interesting options that come up due to the single Tx queue. Locking is needed(to avoid messing up the Tx queues since ndo_xdp_xmit and the normal stack can co-exist). We also need to track down the 'buffer type' for TX and properly free or recycle the packet depending on it's nature. Changes since RFC: - Bug fixes from Jesper and Maciej - Added page pool API to retrieve the DMA direction Changes since v1: - Use page_pool_free correctly if xdp_rxq_info_reg() failed ==================== Signed-off-by:
-
Ilias Apalodimas authored
The interface only supports 1 Tx queue so locking is introduced on the Tx queue if XDP is enabled to make sure .ndo_start_xmit and .ndo_xdp_xmit won't corrupt Tx ring - Performance (SMMU off) Benchmark XDP_SKB XDP_DRV xdp1 291kpps 344kpps rxdrop 282kpps 342kpps - Performance (SMMU on) Benchmark XDP_SKB XDP_DRV xdp1 167kpps 324kpps rxdrop 164kpps 323kpps Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Ilias Apalodimas authored
Since the dma direction is stored in page pool params, offer an API helper for driver that choose not to keep track of it locally Signed-off-by:
-
Ilias Apalodimas authored
Use page_pool and it's DMA mapping capabilities for Rx buffers instead of netdev/napi_alloc_frag() Although this will result in a slight performance penalty on small sized packets (~10%) the use of the API will allow to easily add XDP support. The penalty won't be visible in network testing i.e ipef/netperf etc, it only happens during raw packet drops. Furthermore we intend to add recycling capabilities on the API in the future. Once the recycling is added the performance penalty will go away. The only 'real' penalty is the slightly increased memory usage, since we now allocate a page per packet instead of the amount of bytes we need + skb metadata (difference is roughly 2kb per packet). With a minimum of 4BG of RAM on the only SoC that has this NIC the extra memory usage is negligible (a bit more on 64K pages) Signed-off-by:
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
David S. Miller authored
Roman Mashak says: ==================== Fix batched event generation for mirred action When adding or deleting a batch of entries, the kernel sends upto TCA_ACT_MAX_PRIO entries in an event to user space. However it does not consider that the action sizes may vary and require different skb sizes. For example : % cat tc-batch.sh TC="sudo /mnt/iproute2.git/tc/tc" $TC actions flush action mirred for i in `seq 1 $1`; do cmd="action mirred egress redirect dev lo index $i " args=$args$cmd done $TC actions add $args % % ./tc-batch.sh 32 Error: Failed to fill netlink attributes while adding TC action. We have an error talking to the kernel % patch 1 adds callback in tc_action_ops of mirred action, which calculates the action size, and passes size to tcf_add_notify()/tcf_del_notify(). patch 2 updates the TDC test suite with relevant test cases. ==================== Signed-off-by: -
Roman Mashak authored
Signed-off-by:
-
Roman Mashak authored
Add get_fill_size() routine used to calculate the action size when building a batch of events. Signed-off-by:
-
Jason A. Donenfeld authored
People are inclined to stuff random things into cb->args[n] because it looks like an array of integers. Sometimes people even put u64s in there with comments noting that a certain member takes up two slots. The horror! Really this should mirror the usage of skb->cb, which are just 48 opaque bytes suitable for casting a struct. Then people can create their usual casting macros for accessing strongly typed members of a struct. As a plus, this also gives us the same amount of space on 32bit and 64bit. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
