- 09 Feb, 2020 2 commits
-
-
Benjamin Gaignard authored
Convert raydium,rm68200 to json-schema. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200206133344.724-3-benjamin.gaignard@st.com
-
Sam Ravnborg authored
To complement panel-simple.yaml, create panel-simple-dsi.yaml. panel-simple-dsi-yaml are for all simple DSP panels with a single power-supply and optional backlight / enable GPIO. Migrate panasonic,vvx10f034n00 over to the new file. The objectives with one file for all the simple DSI panels are: - Make it simpler to add bindings for simple DSI panels - Keep the number of bindings file lower - Keep the binding documentation for simple DSI panels more consistent Signed-off-by:
-
- 07 Feb, 2020 1 commit
-
-
Gerd Hoffmann authored
If the virtio device supports indirect ring descriptors we need only one ring entry for the whole command. Take that into account when checking whenever the virtqueue has enough free entries for our command. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200207064653.14403-1-kraxel@redhat.com
-
- 06 Feb, 2020 14 commits
-
-
Chia-I Wu authored
It becomes clear that virtio_gpu_queue_fenced_ctrl_buffer should be responsible for setting up sgs and virtio_gpu_queue_ctrl_sgs should be responsible for queuing sgs. Signed-off-by:
-
Chia-I Wu authored
When vqs_ready is false, vq should be considered invalid and we should not check vq->num_free. After this change, a fenced command queued before the vqs are ready will have fence id 0 and will be considered done. Signed-off-by:
-
Chia-I Wu authored
Signed-off-by:
-
Chia-I Wu authored
sgs setup does not need to be in the critical section. Signed-off-by:
-
Chia-I Wu authored
We don't propagate erros to the callers. We have to unlock object arrays on errors. Signed-off-by:
-
Chia-I Wu authored
We can get it from vbuf. Signed-off-by:
-
Chia-I Wu authored
It is a helper to return the virtio_gpu_ctrl_hdr in a vbuf. Signed-off-by:
-
Chia-I Wu authored
The handling of virtqueue_add_sgs ENOSPC error is incorrect because it can result in out-of-order virtqueue_add_sgs and break fences. We never get ENOSPC anyway because the caller waits until there is enough space (the other caller that did not wait was removed in commit 32d6c2c5 ("drm/virtio: Rewrite virtio_gpu_queue_ctrl_buffer using fenced version.")). Remove the incorrect and unnecessary error path. This also adds a WARN_ON(ret) until we properly handle errors. Signed-off-by:
-
Chia-I Wu authored
outcnt may be greater than 1 since commit e1218b8c ("drm/virtio: Use vmalloc for command buffer allocations."). Fixes: e1218b8c ("drm/virtio: Use vmalloc for command buffer allocations.") Signed-off-by:
-
Gerd Hoffmann authored
Avoid flooding the log in case we screw up badly. Signed-off-by:
-
Thomas Zimmermann authored
The implementation of struct drm_mode_config_funcs.mode_valid verifies that enough video memory is available for a given display mode. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200203155258.9346-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
The implementation of struct drm_mode_config_funcs.mode_valid verifies that enough video memory is available for a given display mode. Signed-off-by:
-
Thomas Zimmermann authored
The implementation of struct drm_mode_config_funcs.mode_valid verifies that enough video memory is available for a given display mode. This replaces similar functionality in bochs_connector_mode_valid(). v2: * remove bochs_connector_mode_valid(), which now serves no purpose Signed-off-by:
-
Thomas Zimmermann authored
Devices with low amount of dedicated video memory may not be able to use all possible display modes, as the framebuffers may not fit into VRAM. The new helper function drm_vram_helper_mode_valid() implements a simple test to sort out all display modes that can not be used in any case. Drivers should call this function from struct drm_mode_config_funcs.mode_valid. The functionality was originally implemented by the ast driver, which is being converted as well. v2: * WARN_ON if VRAM memory manager has not been initialized * documentation fixes * unexported drm_vram_helper_mode_valid_internal() Signed-off-by:
-
- 05 Feb, 2020 1 commit
-
-
Gerd Hoffmann authored
virtio has its own commit fail function. Add the drm_atomic_helper_fake_vblank() call there. Fixes: 2a735ad3 ("drm/virtio: Remove sending of vblank event") Signed-off-by:
-
- 04 Feb, 2020 6 commits
-
-
Chris Wilson authored
Internally for "consistent" maps, we create a temporary struct drm_dma_handle in order to use our own dma_alloc_coherent wrapper then destroy the temporary wrap. Simplify our logic by removing the temporary wrapper! Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma facilities, and we have no special reason within the drm layer to behave differently. In particular, since commit de09d31d Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Fri Jan 15 16:51:42 2016 -0800 page-flags: define PG_reserved behavior on compound pages As far as I can see there's no users of PG_reserved on compound pages. Let's use PF_NO_COMPOUND here. it has been illegal to combine GFP_COMP with SetPageReserved, so lets stop doing both and leave the dma layer to its own devices. Reported-by: Taketo Kabe Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027 Fixes: de09d31d ("page-flags: define PG_reserved behavior on compound pages") Signed-off-by:
-
Etienne Carriere authored
Change DSI driver to not print an error trace when probe is deferred for a clock resource. Signed-off-by:
Etienne Carriere <etienne.carriere@st.com> Reviewed-by:
-
Yannick Fertre authored
Following investigations of a hardware bug, the LIE interrupt can occur while the display controller is not activated. LIE interrupt (vblank) don't have to be set if the CRTC is not enabled. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Acked-by:
-
Yannick Fertre authored
The number of interrupts depends on the ltdc version. Don't try to get interrupt which not exist, avoiding kernel warning messages. Signed-off-by:
-
Thomas Zimmermann authored
Daniel asked me to serve as co-maintainer of the drm-misc tree. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Acked-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
-
- 31 Jan, 2020 8 commits
-
-
Boris Brezillon authored
The lt089ac29000 panel is an LVDS panel, not a DPI one. Fix the definition to reflect this fact. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * New patch Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Suggested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Boris Brezillon authored
Now that bridges can expose the bus format/flags they expect, we can use those instead of the relying on the display_info provided by the connector (which is only valid if the encoder is directly connected to bridge element driving the panel/display). We also explicitly expose the bus formats supported by our encoder by filling encoder->output_bus_caps with proper info. v10: * Add changelog to the commit message * Use kmalloc() instead of kcalloc() * Add a dev_warn() when unsupported flags are requested v8 -> v9: * No changes v7: * Add an imx_pd_format_supported() helper (suggested by Philipp) * Simplify imx_pd_bridge_atomic_get_output_bus_fmts() (suggested by Philipp) * Simplify imx_pd_bridge_atomic_get_input_bus_fmts() * Explicitly set the duplicate/destro_state() and reset() hooks v4 -> v6: * Patch was not part of the series v3 (all suggested by Philipp): * Adjust to match core changes * Propagate output format to input format * Pick a default value when output_fmt = _FIXED * Add missing BGR888 and GBR888 fmts to imx_pd_bus_fmts[] v2: * Adjust things to match the new bus-format negotiation infra Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-8-boris.brezillon@collabora.com
-
Boris Brezillon authored
drm_bridge_state is extended to describe the input and output bus configurations. These bus configurations are exposed through the drm_bus_cfg struct which encodes the configuration of a physical bus between two components in an output pipeline, usually between two bridges, an encoder and a bridge, or a bridge and a connector. The bus configuration is stored in drm_bridge_state separately for the input and output buses, as seen from the point of view of each bridge. The bus configuration of a bridge output is usually identical to the configuration of the next bridge's input, but may differ if the signals are modified between the two bridges, for instance by an inverter on the board. The input and output configurations of a bridge may differ if the bridge modifies the signals internally, for instance by performing format conversion, or*modifying signals polarities. Bus format negotiation is automated by the core, drivers just have to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they want to take part to this negotiation. Negotiation happens in reverse order, starting from the last element of the chain (the one directly connected to the display) up to the first element of the chain (the one connected to the encoder). During this negotiation all supported formats are tested until we find one that works, meaning that the formats array should be in decreasing preference order (assuming the driver has a preference order). Note that the bus format negotiation works even if some elements in the chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks. In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets the previous bridge element decide what to do (most of the time, bridge drivers will pick a default bus format or extract this piece of information from somewhere else, like a FW property). v10: * Add changelog to the commit message v9: * No changes v8: * Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by Jonas) v7: * Adapt the code to deal with the fact that not all bridges in the chain have a bridge state v5 -> v6: * No changes v4: * Enhance the doc * Fix typos * Rename some parameters/fields * Reword the commit message v3: * Fix the commit message (Reported by Laurent) * Document the fact that bus formats should not be directly modified by drivers (Suggested by Laurent) * Document the fact that format order matters (Suggested by Laurent) * Propagate bus flags by default * Document the fact that drivers can tweak bus flags if needed * Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format array (Suggested by Laurent) * Add a drm_atomic_helper_bridge_propagate_bus_fmt() * Mandate that bridge drivers return accurate input_fmts even if they are known to be the first element in the bridge chain v2: * Rework things to support more complex use cases Signed-off-by:Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format] Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Tested-by:
Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com
-
Boris Brezillon authored
So that bridge drivers have a way to check/reject an atomic operation. The drm_atomic_bridge_chain_check() (which is just a wrapper around the ->atomic_check() hook) is called in place of drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented, the core falls back on ->mode_fixup(), so the behavior should stay the same for existing bridge drivers). v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Fix a NULL pointer dereference v5 -> v6: * No changes v4: * Add R-bs v3: * No changes v2: * Clarify the fact that ->atomic_check() is replacing ->mode_fixup() Signed-off-by:
-
Boris Brezillon authored
This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The drivers implementing those hooks are patched too. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Adjust things to the bridge_state changes v6: * Also fixed rcar-du/rcar_lvds.c same as analogix/analogix_dp_core.c v5: * No changes v4: * Rename func params into old_bridge_state * Add Laurent's Rb v3: * Old state clarification moved to a separate patch v2: * Pass the old bridge state Signed-off-by:
-
Boris Brezillon authored
This is needed to pass a bridge state to all atomic hooks, if we don't do that, the core can't duplicate/create bridge states. v10: * Add changelog to the commit message v9: * Add Neil's R-b * Move earlier in the series v8: * No changes v7: * New patch Signed-off-by:
-
Boris Brezillon authored
This is needed to pass a bridge state to all atomic hooks, if we don't do that, the core can't duplicate/create bridge states. v10: * Add changelog to the commit message v9: * Add Neil's R-b * Move earlier in the series v8: * No changes v7: * New patch Signed-off-by:
-
Boris Brezillon authored
One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. v10: * Add changelog to the commit message v9: * Clarify the fact that the bridge->atomic_reset() and {connector,plane,crtc,...}->reset() semantics are different * Move the drm_atomic_private_obj_init() call back to drm_bridge_attach() * Check the presence of ->atomic_duplicate_state instead of ->atomic_reset in drm_atomic_add_encoder_bridges() * Fix copy&paste errors in the atomic bridge state helpers doc * Add A-b/R-b tags v8: * Move bridge state helpers out of the CONFIG_DEBUGFS section v7: * Move helpers, struct-defs, ... to atomic helper files to avoid the drm -> drm_kms_helper -> drm circular dep * Stop providing default implementation for atomic state reset, duplicate and destroy hooks (has to do with the helper/core split) * Drop all R-b/T-b as helpers have now be moved to other places v6: * Made helpers private, removed doc and moved them to satisfy dependencies * Renamed helpers to _default_ v5: * Re-introduced the helpers from v4 v4: * Fix the doc * Kill default helpers (inlined) * Fix drm_atomic_get_bridge_state() to check for an ERR_PTR() * Add Neil's R-b v3: * No changes v2: * Use drm_for_each_bridge_in_chain() * Rename helpers to be more consistent with the rest of the DRM API * Improve/fix the doc Signed-off-by:
-
- 30 Jan, 2020 8 commits
-
-
Michael Srba authored
Add driver for Samsung AMS452EF01 AMOLED panel, which makes use of their S6E88A0 controller. Signed-off-by:
Michael Srba <Michael.Srba@seznam.cz> Signed-off-by:
-
Michael Srba authored
This patch adds dts bindings for Samsung AMS452EF01 AMOLED panel, which makes use of their S6E88A0 controller. Signed-off-by:
-
Marian-Cristian Rotariu authored
EDT ET043080DH6-GP is a 4.3" WQVGA 480x272 RGB LCD panel used on the iWave Generic SODIMM Development Platform. Changes in v2: -added mandatory .connector_type field -changed the .bus_format MEDIA_BUS_FMT_RGB666_1X18 Signed-off-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Marian-Cristian Rotariu authored
Document the Emerging Display Technology Corp. (EDT) ETM043080DH6-GP display, which is a 480x272 4.3" TFT display with capacitive touchscreen. Changes in v2: -modify proper bindings file Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. This would apply to xen, but xen has its own vblank logic. To avoid interfering with the atomic helpers, disable automatic vblank events explicitly. v5: * update comment v4: * separate commit from core vblank changes Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-16-tzimmermann@suse.de
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
As udl does not initialize vblanking, atomic helpers initialize the value of struct drm_crtc_state.no_vblank to be true. No need to set it from within the driver. Signed-off-by:
-
