- 24 Nov, 2019 40 commits
-
-
Wolfram Sang authored
[ Upstream commit c96c0f26 ] And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wolfram Sang authored
[ Upstream commit de82bb43 ] And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wolfram Sang authored
[ Upstream commit f37b2bb6 ] And don't reimplement in the driver. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bob Peterson authored
[ Upstream commit b524abcc ] When an io error is hit, it calls gfs2_io_error_bh_i for every journal buffer it can't write. Since we changed gfs2_io_error_bh_i recently to withdraw later in the cycle, it sends a flood of errors to the console. This patch checks for the file system already being withdrawn, and if so, doesn't send more messages. It doesn't stop the flood of messages, but it slows it down and keeps it more reasonable. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hans Verkuil authored
[ Upstream commit c439d5c1 ] If a receive is in progress or starts before the transmit has a chance, then lower the Signal Free Time of the upcoming transmit to no more than CEC_SIGNAL_FREE_TIME_NEW_INITIATOR. This is per the specification requirements. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hugues Fruchet authored
[ Upstream commit 0929983e ] Changing framerate right before streamon had no effect, the new framerate value was taken into account only at next streamon, fix this. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rami Rosen authored
[ Upstream commit f4d34aa8 ] Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Olga Kornievskaia authored
[ Upstream commit 44f411c3 ] Running "./nfstest_delegation --runtest recall26" uncovers that client doesn't recover the lock when we have an appending open, where the initial open got a write delegation. Instead of checking for the passed in open context against the file lock's open context. Check that the state is the same. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
He Zhe authored
[ Upstream commit 51a72ab7 ] log_first_seq and console_seq are 64-bit unsigned integers. Correct a wrong casting that might cut off the output. Link: http://lkml.kernel.org/r/1538239553-81805-2-git-send-email-zhe.he@windriver.com Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Signed-off-by: He Zhe <zhe.he@windriver.com> [sergey.senozhatsky@gmail.com: More descriptive commit message] Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Fainelli authored
[ Upstream commit e1eba2ea ] ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the same controller, make it possible to select the STB driver and update the Kconfig and help text a bit. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Marek Szyprowski authored
[ Upstream commit 1da220e3 ] clk_notifier_register() documentation states, that the provided notifier callbacks associated with the notifier must not re-enter into the clk framework by calling any top-level clk APIs. Fix this by replacing clk_get_rate() calls with clk_hw_get_rate(), which is safe in this context. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Joonyoung Shim authored
[ Upstream commit d32dd2a1 ] The bit of GATE_BUS_PERIS1 for CLK_SECKEY is just reserved on exynos5422/5800, not exynos5420. Define gate clk for exynos5420 to handle the bit only on exynos5420. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> [m.szyprow: rewrote commit subject] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Marek Szyprowski authored
[ Upstream commit 70da9ee8 ] SoC clock drivers should suspend after every other drivers in the system, which are using clocks and resume before them. The last stage for calling suspend device callbacks is NOIRQ stage and there exists driver, which use that state (dwmmc-exynos), so Exynos5433 clocks driver should also use it. During the same stage, clocks driver will be always suspended after its clients as a direct result of proper device probe order (deferred probe reorders the suspend call sequence). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sergey Matyukevich authored
[ Upstream commit 35da3fe6 ] On disconnect wireless core attempts to remove all the supported keys. Following cfg80211_ops conventions, firmware returns -ENOENT code for the out-of-bound key indexes. This is a normal behavior, so no need to report errors for this case. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sergey Matyukevich authored
[ Upstream commit ab1c64a1 ] Driver retrieves information about supported extended capabilities from wireless card. However this information is not propagated further to Linux wireless core. Fix this by setting extended capabilities fields of wiphy structure. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sergey Matyukevich authored
[ Upstream commit d5657b70 ] SGI should be passed to wireless core as a part of rate structure. Otherwise wireless core performs incorrect rate calculation when SGI is enabled in hardware but not reported to host. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Igor Mitsyanko authored
[ Upstream commit 92246b12 ] In case firmware reports that it can not do OBSS scanning for 40MHz 2.4GHz channels itself, tell userpsace to do that instead by setting NL80211_FEATURE_NEED_OBSS_SCAN flag. Signed-off-by: Igor mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chung-Hsien Hsu authored
[ Upstream commit fbf07000 ] The driver sends an action frame down and waits for a completion signal triggered by the received BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE event to continue the process. However, the action frame could be transmitted either on the current channel or on an off channel. For the on-channel case, only BRCMF_E_ACTION_FRAME_COMPLETE event will be received when the frame is transmitted, which make the driver always wait a full timeout duration. This patch has the completion signal be triggered by receiving the BRCMF_E_ACTION_FRAME_COMPLETE event for the on-channel case. This change fixes WFA p2p certification 5.1.19 failure. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chung-Hsien Hsu authored
[ Upstream commit edb6d688 ] Finding a common channel to send an action frame out is required for some action types. Since a loop with several scan retry is used to find the channel, a short wait time could be considered for each attempt. This patch reduces the wait time from 1500 to 450 msec for each action frame scan. This patch fixes the WFA p2p certification 5.1.20 failure caused by the long action frame send time. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Borislav Petkov authored
[ Upstream commit d0e7d144 ] When booting with "nosmt=force" a message is issued into dmesg to confirm that SMT has been force-disabled but such a message is not issued when only "nosmt" is on the kernel command line. Fix that. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181004172227.10094-1-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ricardo Ribalda Delgado authored
[ Upstream commit ef0de747 ] During probe, if there was an error the memory region and the memory map were not properly released.This can lead a system unusable if deferred probe is in use. Replace mem_request and map with devm_ioremap_resource Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
SolidHal authored
[ Upstream commit c216765d ] The bug would let the usb controller enter partial power down, which was formally known as hibernate, upon boot if nothing was plugged in to the port. Partial power down couldn't be exited properly, so any usb devices plugged in after boot would not be usable. Before the name change, params.hibernation was false by default, so _dwc2_hcd_suspend() would skip entering hibernation. With the rename, _dwc2_hcd_suspend() was changed to use params.power_down to decide whether or not to enter partial power down. Since params.power_down is non-zero by default, it needs to be set to 0 for rockchip devices to restore functionality. This bug was reported in the linux-usb thread: REGRESSION: usb: dwc2: USB device not seen after boot The commit that caused this regression is: 6d23ee9cSigned-off-by: SolidHal <hal@halemmerich.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Johan Hovold authored
[ Upstream commit 56445eef ] Fix interrupt-out transfer length which was being set to the transfer-buffer length rather than the size of the outgoing packet. Note that no slab data was leaked as the whole transfer buffer is always cleared before each transfer. Fixes: 9aa8dae7 ("cypress_m8: use usb_fill_int_urb where appropriate") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Cameron Kaiser authored
[ Upstream commit 1006284c ] When an OS (currently only classic Mac OS) is running in KVM-PR and makes a linked jump from code with split hack addressing enabled into code that does not, LR is not correctly updated and reflects the previously munged PC. To fix this, this patch undoes the address munge when exiting split hack mode so that code relying on LR being a proper address will now execute. This does not affect OS X or other operating systems running on KVM-PR. Signed-off-by: Cameron Kaiser <spectre@floodgap.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vasundhara Volam authored
[ Upstream commit 3a1d52a5 ] Return proper error code when Firmware returns HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED for HWRM_NVM_GET/SET_VARIABLE commands. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Pobega authored
[ Upstream commit d153135e ] The Elo VuPoint 15MX has two headphone jacks of which neither work by default. Disabling automute allows ALSA to work normally with the speakers & left headphone jack. Future pin configuration changes may be required in the future to get the right headphone jack working in tandem. Signed-off-by: Michael Pobega <mpobega@neverware.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jacopo Mondi authored
[ Upstream commit eccf442c ] Currently the adv748x driver will fail to probe unless both of its output endpoints (TXA and TXB) are connected. Make the driver support probing provided that there is at least one input, and one output connected and protect the clean-up function from accessing un-initialized fields. Following patches will fix other uses of un-initialized TXs in the driver, such as power management functions. Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Niklas Söderlund authored
[ Upstream commit 4e673ed4 ] When adding support for parallel subdev for Gen3 it was missed that the symbol 'i' in rvin_group_link_notify() was already declared, remove the dupe as it's only used as a loop variable this have no functional change. This fixes warning: rcar-core.c:117:52: originally declared here rcar-core.c:173:30: warning: symbol 'i' shadows an earlier one Fixes: 1284605d ("media: rcar-vin: Handle parallel subdev in link_notify") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 44d7f1a7 ] Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/media/platform/pxa_camera.c:2400:17: warning: address of 'pdev->dev.of_node' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&pdev->dev.of_node && !pcdev->pdata) { ~~~~~~~~~~^~~~~~~ ~~ 1 warning generated. Judging from the rest of the kernel, it seems like this was an error and just the value of of_node should be checked rather than the address. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Matthias Reichl authored
[ Upstream commit 85e4af0a ] The Kathrein RCU-676 remote uses the 32-bit rc6 protocol and toggles bit 15 (0x8000) on repeated button presses, like MCE remotes. Add it's customer code 0x80460000 to the 32-bit rc6 toggle handling code to get proper scancodes and toggle reports. Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 8fa74e3c ] Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_ll2.c:799:32: warning: implicit conversion from enumeration type 'enum core_tx_dest' to different enumeration type 'enum qed_ll2_tx_dest' [-Wenum-conversion] tx_pkt.tx_dest = p_ll2_conn->tx_dest; ~ ~~~~~~~~~~~~^~~~~~~ 1 warning generated. Fix this by using a switch statement to convert between the enumerated values since they are not 1 to 1, which matches how the rest of the driver handles this conversion. Link: https://github.com/ClangBuiltLinux/linux/issues/125Suggested-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 6adde4a3 ] Clang warns when one enumerated type is implicitly converted to another. drivers/ata/pata_ep93xx.c:662:36: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] drv_data->dma_rx_data.direction = DMA_FROM_DEVICE; ~ ^~~~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:670:36: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] drv_data->dma_tx_data.direction = DMA_TO_DEVICE; ~ ^~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:681:19: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] conf.direction = DMA_FROM_DEVICE; ~ ^~~~~~~~~~~~~~~ drivers/ata/pata_ep93xx.c:692:19: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] conf.direction = DMA_TO_DEVICE; ~ ^~~~~~~~~~~~~ Use the equivalent valued enums from the expected type so that Clang no longer warns about a conversion. DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1 DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2 Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nicholas Piggin authored
[ Upstream commit 053c5a75 ] Local radix TLB flush operations that operate on congruence classes have explicit ERAT flushes for POWER9. The process scoped LPID flush did not have a flush, so add it. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Anton Blanchard authored
[ Upstream commit 8b78fdb0 ] We currently cap the decrementer clockevent at 4 seconds, even on systems with large decrementer support. Fix this by converting the code to use clockevents_register_device() which calculates the upper bound based on the max_delta passed in. Signed-off-by: Anton Blanchard <anton@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 8e9f7265 ] The q6asm_audio_client_alloc() doesn't return NULL, it returns error pointers. Fixes: 2a9e92d3 ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rafael J. Wysocki authored
[ Upstream commit 5f26bdce ] If the CPU exits the "polling" state due to the time limit in the loop in poll_idle(), this is not a real wakeup and it just means that the "polling" state selection was not adequate. The governor mispredicted short idle duration, but had a more suitable state been selected, the CPU might have spent more time in it. In fact, there is no reason to expect that there would have been a wakeup event earlier than the next timer in that case. Handling such cases as regular wakeups in menu_update() may cause the menu governor to make suboptimal decisions going forward, but ignoring them altogether would not be correct either, because every time menu_select() is invoked, it makes a separate new attempt to predict the idle duration taking distinct time to the closest timer event as input and the outcomes of all those attempts should be recorded. For this reason, make menu_update() always assume that if the "polling" state was exited due to the time limit, the next proper wakeup event for the CPU would be the next timer event (not including the tick). Fixes: a37b969a "cpuidle: poll_state: Add time limit to poll_idle()" Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bob Moore authored
[ Upstream commit 8b1cafdc ] These address spaces are defined by the ACPI spec to be "always available", and thus _REG should never be run on them. Provides compatibility with other ACPI implementations. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Viresh Kumar authored
[ Upstream commit 09f662f9 ] Return error number instead of 0 on failures. Fixes: a1e8c136 ("PM / OPP: "opp-hz" is optional for power domains") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jordan Crouse authored
[ Upstream commit 32aa27e1 ] The point of the 'force_dma' parameter for of_dma_configure is to force the device to be set up even if DMA capability is not described by the firmware which is exactly the use case we have for GMU - we need SMMU to get set up but we have no other dma capabilities since memory is managed by the GPU driver. Currently we pass false so of_dma_configure() fails and subsequently GMU and GPU probe does as well. Fixes: 4b565ca5 ("drm/msm: Add A6XX device support") Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arun Kumar Neelakantam authored
[ Upstream commit 928002a5 ] The current rx peak function fails to read the data if size is less than 4bytes. Use memcpy_fromio to support data reads of size less than 4 bytes. Cc: stable@vger.kernel.org Fixes: f0beb4ba ("rpmsg: glink: Remove chunk size word align warning") Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-