With gcc 4.3 and later, a pointer that has already been dereferenced is
assumed not to be null since it should have caused a segmentation fault
otherwise, hence any subsequent test against NULL is optimized away.

Current inline asm constraint used in the implementation of prefetch()
makes gcc believe that the pointer is dereferenced even though the PLD
instruction does not load any data and does not cause a segmentation
fault on null pointers, which causes all sorts of interesting results
when reaching the end of a linked lists for example.

Let's use a better constraint to properly represent the actual usage of
the pointer value.

Problem reported by Chris Steel.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

... otherwise these fail to build.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Commit 2ccdd1e7 doesn't add
v7wbi_possible_flags and v7wbi_always_flags to possible_tlb_flags and
always_tlb_flags.  This causes the L2 cache flush in clean_pmd_entry()
(intended for Feroceon only) to execute on ARMv7, and the CPU hangs.

This patch is required for OMAP3 boards to boot.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Setup some missing syscall pointed out by the checksyscalls.sh script. Fix two
small whitespace issues while being there.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Calling the undefined instruction handler functions with a
spinlock held is a recipe for must_sleep() warnings.  Avoid it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Fix Poodle ASoC compilation by providing Poodle LoCoMo GPIO names.

Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Convert the existing dma_sync_single_for_* APIs to the new range based
APIs, and make the dma_sync_single_for_* API a superset of it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

OMAP at least gets the return type(s) for the DMA translation functions
wrong, which can lead to subtle errors.  Avoid this by moving the DMA
translation functions to asm/dma-mapping.h, and converting them to
inline functions.

Fix the OMAP DMA translation macros to use the correct argument and
result types.

Also, remove the unnecessary casts in dmabounce.c.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

This patch will truncate and/or ignore memory banks if their kernel
direct mappings would (partially) overlap with the vmalloc area or
the mappings between the vmalloc area and the address space top, to
prevent crashing during early boot if there happens to be more RAM
installed than we are expecting.

Since the start of the vmalloc area is not at a fixed address (but
the vmalloc end address is, via the per-platform VMALLOC_END define),
a default area of 128M is reserved for vmalloc mappings, which can
be shrunk or enlarged by passing an appropriate vmalloc= command line
option as it is done on x86.

On a board with a 3:1 user:kernel split, VMALLOC_END at 0xfe000000,
two 512M RAM banks and vmalloc=128M (the default), this patch gives:

	Truncating RAM at 20000000-3fffffff to -35ffffff (vmalloc region overlap).
	Memory: 512MB 352MB = 864MB total

On a board with a 3:1 user:kernel split, VMALLOC_END at 0xfe800000,
two 256M RAM banks and vmalloc=768M, this patch gives:

	Truncating RAM at 00000000-0fffffff to -0e7fffff (vmalloc region overlap).
	Ignoring RAM at 10000000-1fffffff (vmalloc region overlap).
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Riku Voipio <riku.voipio@iki.fi>

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

The QNAP TS-109/TS-209 and TS-409 devices need RTC_DRV_S35390A.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Enable RTC_DRV_PCF8563 in the Orion defconfig since this driver is
needed by the HP mv2120.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Enable KEYBOARD_GPIO in the Orion defconfig because a number of Orion
devices, such as the HP mv2120, define gpio-keys buttons.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

The reset button on the QNAP TS-409 is available through gpio.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Use key codes for the buttons on the TS-209/TS-409 that make more
sense than the current values.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Byron Bradley <byron.bbradley@gmail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Export the four red SATA LEDs on the QNAP TS-409 that are connected
through gpio.  Since the boot loader apparently sets the SATA LEDs 2-4
to red and the SATA LED can only be red or green (but not both),
exporting the red SATA LEDs (which automatically turns them off upon
boot) makes the green SATA presence/activity indication visible.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Sylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

On D0 5281 SoCs, we need to disable the wait-for-interrupt
instruction due to an erratum.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Martin Michlmayr <tbm@cyrius.com>

Update the status of the S3C24XX GPIO now we have
moved to supporting GPIOLIB
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Update SD/MMC status now that the driver is merged.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Update supported and in-progress cpu list.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Update documentation in arch/arm/plat-s3c24xx
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

s3c_lookup_cpu is only used at init time, so make
it __init.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

The cats_map_irq() function in the Simtec CATS support
code is mapping IRQ 255 (invalid IRQ) into what is a
supposedly valid interrupt numner which can cause problems
with other devices then seeing an interrupt they cannot
claim.

If the IRQ number if >= 255, then return -1 as this is not
something we can map.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Removed duplicated include file <linux/mtd/mtd.h> and <linux/mtd/partitions.h>
in arch/arm/mach-s3c2412/mach-jive.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This patch fixes compilation error if no s3c2410 processor is selected
but the s3c244x is selected. The function s3c2410_baseclk_add() is now
available for all Samsung cpus.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
[ben-linux@fluff.org: Whitespace and description fixups]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This patch performs the equivalent include directory shuffle for
plat-orion, and fixes up all users.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ][2/2] preregister support for powernow-k8
  [CPUFREQ][1/2] whitespace fix for powernow-k8
  [CPUFREQ] Update MAINTAINERS to reflect new mailing list.
  [CPUFREQ] Fix warning in elanfreq
  [CPUFREQ] Fix -Wshadow warning in conservative governor.
  [CPUFREQ] Remove EXPERIMENTAL annotation from VIA C7 powersaver kconfig.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] list entry can not return null
  turn cifs_setattr into a multiplexor that calls the correct function
  move file time and dos attribute setting logic into new function
  spin off cifs_setattr with unix extensions to its own function
  [CIFS] Code cleanup in old sessionsetup code
  [CIFS] cifs_mkdir and cifs_create should respect the setgid bit on parent dir
  Rename CIFSSMBSetFileTimes to CIFSSMBSetFileInfo and add PID arg
  change CIFSSMBSetTimes to CIFSSMBSetPathInfo
  [CIFS] fix trailing whitespace
  bundle up Unix SET_PATH_INFO args into a struct and change name
  Fix missing braces in cifs_revalidate()
  remove locking around tcpSesAllocCount atomic variable
  [CIFS] properly account for new user= field in SPNEGO upcall string allocation
  [CIFS] remove level of indentation from decode_negTokenInit
  [CIFS] cifs send2 not retrying enough in some cases on full socket
  [CIFS] oid should also be checked against class in cifs asn

Fix fatal multi-line kernel-doc error in list.h:
function short description must be on one line.

Error(linux-2.6.27-rc2-git3//include/linux/list.h:318): duplicate section name 'Description'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Steve French <sfrench@us.ibm.com>

This patch provides support for the _PSD ACPI object in the Powernow-k8
driver.  Although it looks like an invasive patch, most of it is
simply the consequence of turning the static acpi_performance_data
structure into a pointer.

AMD has tested it on several machines over the past few days without issue.

[trivial checkpatch warnings fixed up by davej]
[X86_POWERNOW_K8_ACPI=n buildfix from Randy Dunlap]
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Tested-by: Frank Arnold <frank.arnold@amd.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Trivial whitespace fix for powernow-k8.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Mailing list moved to vger.
Signed-off-by: Dave Jones <davej@redhat.com>

arch/x86/kernel/cpu/cpufreq/elanfreq.c:47:26: warning: symbol 'elan_multiplier' was not declared. Should it be static?

Yes, yes it should.
Signed-off-by: Dave Jones <davej@redhat.com>