Now that the bridge join and leave functions only deal with a DSA port,
change their scope from the DSA slave net_device to the DSA generic
dsa_port.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the scope of the fabric notification helper from the DSA slave to
the DSA port, since this is a DSA layer specific notion, that can be
used by non-slave ports (CPU and DSA).
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of having multiple STP state helpers scoping a slave device
supporting both the DSA logic and the switchdev binding, provide a
single dsa_port_set_state helper scoping a DSA port, as well as its
dsa_port_set_state_now wrapper which skips the prepare phase.

This allows us to better separate the DSA logic from the slave device
handling.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: introduce nfp_port and nfp_app

This series builds foundation for upcoming development.  So far the nfp
driver was focused on delivering basic NIC-like functionality.  We want
to switch gears a bit going forward and support more advanced applications.

First few patches are naming clean ups and reshuffling.  The two main
structures this series adds are nfp_port and nfp_app.

nfp_port represents a device port, where port can mean external port,
VF or PF.  For now only external port/MAC/PHY port is added.  nfp_port
is supposed to make it easy to share ethtool and devlink code regardless
of netdev type (full vNIC vs representors).

nfp_app is an abstraction which should allow easier development of new
applications.  So far we have relied fully on port capabilities to detect
which offloads and features are available.  The usual development model
for NFP is that people start with one of our "core NIC" FW apps (C one,
or a macro assembler one) and build advanced functionality on top of that.
Therefore basic netdev code is shared, but the higher-level logic is
usually more project specific.  The higher-level logic is also per-adapter
rather than per-port, so creating per-adapter control entity makes sense.
Hopefully the separation of lower-level netdev code and application logic
will help us limit interdependencies and accelerate parallel projects
(e.g. TC flower offloads vs eBPF offload).

v2:
 - don't hide definition of nfp_app to avoid silly function calls (Dave);
 - reorder kdoc of nfp_main (Simon);
 - make nfp_netdev_is_nfp_net() static inline as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

State of autonegotiation may have changed but is not yet refreshed.
Make sure ethtool respects the NFP_PORT_CHANGED flag when looking
at autoneg.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If reading new state of the port failed, mark the port back as CHANGED.
This way next user state request will trigger refresh, which will
hopefully succeed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After port configuration is performed mark it as changed. This
will close a window of time between configuration and async
state refresh which runs from a workqueue where old port state
would be reported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add link to nfp_ports to make it possible to iterate over all ports.
This will come in handy when some ports may be representors.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Track whether physical port's state have changed since last refresh
inside the nfp_port structure instead of the vNIC structure.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Always updating port state in place by overriding values in exiting
pf->eth_tbl makes things easier to manage and allows us to have a
common helper for both full and per-port refresh.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Encapsulate port information into struct nfp_port.  nfp_port will
soon be extended to contain devlink_port information.  It also makes
it easier to reuse port-related code between vNICs and representors.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We only support core NIC apps which have vNICs for each physical port/
split and no representors right now.  Enforce that either each vNIC has
a NSP eth_table entry or if NSP port table is not available none do.

One scenario this will prevent from happening is user force-loading
wrong firmware file if FW app requires different firmwares per media
config.

While at it move some code to nfp_net_pf_alloc_vnic() to make it
counter-match nfp_net_pf_free_vnic() better.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a concept of an application.  For now it's just grouping
pointers and serving as a layer of indirection.  It will help us
weaken the dependency on nfp_net in ethtool code.  Later series
will flesh out support for different apps in the driver.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Soon a third place will need to free a struct nfp_net.  Add a free
counterpart to nfp_net_pf_alloc_vnic().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vNIC is a PCIe-side abstraction NFP firmwares supported by this
driver use.  It was initially meant to represent a device port
and therefore a netdev but today should be thought of as a way
of grouping descriptor rings and associated state.  Advanced apps
will have vNICs without netdevs and ports without a vNIC (using
representors instead).

Make sure code refers to vNICs as vNICs and not ports or netdevs.
No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct nfp_net represents a vNIC, we will be moving away from the
requirement for every vNIC to have a netdev associated with it.
Remove "netdev" from some function names and prefer passing
struct nfp_net pointer as argument instead of struct net_device *.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add nfp_cppcore_pcie_unit() helper to retrieve the PCIE unit of a CPP
handle and use the new helper as appropriate.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current bridge code incorrectly handles starting/stopping of hello and
hold timers during STP enable/disable.

1. Timers are stopped in br_stp_start() during NO_STP->USER_STP
   transition. The timers are already stopped in NO_STP state so
   this is confusing no-op.

2. During USER_STP->NO_STP transition the timers are started. This
   does not make sense and is confusion because the timer should not be
   active in NO_STP state.

Cc: davem@davemloft.net
Cc: sashok@cumulusnetworks.com
Cc: stephen@networkplumber.org
Cc: bridge@lists.linux-foundation.org
Cc: lucien.xin@gmail.com
Cc: nikolay@cumulusnetworks.com
Signed-off-by: Ivan Vecera <cera@cera.cz>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sizeof(priv->ucc_pram) is 4 as it is the size of a pointer, but we want
to reserve space for the struct ucc_hdlc_param.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed a coding style issue
Signed-off-by: Rohit Chavan <roheetchavan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a typo in sockfd_lookup() in net/socket.c.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Add extack for route add/delete failures

Use the extack feature to improve error messages to user on route
add and delete failures.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add messages for non-obvious errors (e.g, no need to add text for malloc
failures or ENODEV failures). This mostly covers the annoying EINVAL errors
Some message strings violate the 80-columns but searchable strings need to
trump that rule.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Plumb extack argument down to route add functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add messages for non-obvious errors (e.g, no need to add text for malloc
failures or ENODEV failures). This mostly covers the annoying EINVAL errors
Some message strings violate the 80-columns but searchable strings need to
trump that rule.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Plumb extack argument down to route add functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The macsec implementation shouldn't account for rx/tx packets that are
dropped in the netdev framework. The netdev framework itself accounts
for such packets by atomically updating struct net_device`rx_dropped and
struct net_device`tx_dropped fields. Later on when the stats for macsec
link is retrieved, the packets dropped in netdev framework will be
included in dev_get_stats() after calling macsec.c`macsec_get_stats64()
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Needs to follow the existing sequence.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

A definition was only provided for asm-generic/socket.h
using platforms, define it for the others as well
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP_USER_TIMEOUT is still converted to jiffies value in
icsk_user_timeout

So we need to make a conversion for the cases HZ != 1000

Fixes: 9a568de4 ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

THe seg6_pernet_data variable was set but never used.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The build header functions are not used by any other code.

net/ipv6/fou6.c:36:5: warning: no previous prototype for ‘fou6_build_header’ [-Wmissing-prototypes]
net/ipv6/fou6.c:54:5: warning: no previous prototype for ‘gue6_build_header’ [-Wmissing-prototypes]

Need to do some code rearranging to satisfy different Kconfig possiblities.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TCP New Vegas congestion control was exporting an internal
function tcpnv_get_info which is not used by any other in tree
kernel code. Make it static.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The prototype for inet_rcv_saddr_equal was not being included.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This warning:
net/ipv6/ila/ila_lwt.c: In function ‘ila_output’:
net/ipv6/ila/ila_lwt.c:42:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]

It looks like the code attempts to set propagate different error
values, but always returned -EINVAL.

Compile tested only. Needs review by original author.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Found by reviewing the warning about unused policy table.
The code implies that it meant to check for size, but since
it unrolled the loop for attribute validation that is never used.
Instead do explicit check for attribute.

Compile tested only. Needs review by original author.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Miroslav Lichvar says:

====================
Extend socket timestamping API

Changes v5->v6:
- fixed skb_is_swtx_tstamp() when OPT_TX_SWHW is disabled and improved
  its description
- improved OPT_PKTINFO documentation
- improved scm_timestamping documentation

Changes v4->v5:
- fixed initialization of reserved fields in struct scm_ts_pktinfo

Changes v3->v4:
- added reserved fields to struct scm_ts_pktinfo
- replaced patch fixing false SW timestamps with a documentation fix
- updated OPT_TX_SWHW patch to handle false SW timestamps

Changes v2->v3:
- modified struct scm_ts_pktinfo to use fixed-width integer types
- added WARN_ON_ONCE for missing RCU lock in dev_get_by_napi_id()
- modified dev_get_by_napi_id() to not return dev in unexpected branch
- modified recv to return SCM_TIMESTAMPING_PKTINFO even if the interface
  index is unknown

Changes v1->v2:
- added separate patch for new NAPI functions
- split code from __sock_recv_timestamp() for better readability
- fixed RCU locking
- fixed compiler warning (missing case in switch in first patch)
- inline sw_tx_timestamp() in its only user

Changes RFC->v1:
- reworked SOF_TIMESTAMPING_OPT_PKTINFO patch to not add new fields to
  skb shared info (net device is now looked up by napi_id), not require
  any changes in drivers, and restrict the cmsg to incoming packets
- renamed SOF_TIMESTAMPING_OPT_MULTIMSG to SOF_TIMESTAMPING_OPT_TX_SWHW
  and fixed its description
- moved struct scm_ts_pktinfo from errqueue.h to net_tstamp.h as it
  can't be received from the error queue anymore
- improved commit descriptions and removed incorrect comment

This patchset adds new options to the timestamping API that will be
useful for NTP implementations and possibly other applications.

The first patch specifies a timestamp filter for NTP packets. The second
patch updates drivers that can timestamp all packets, or need to list
the filter as unsupported. There is no attempt to add the support to the
phyter driver.

The third patch adds two helper functions working with NAPI ID, which is
needed by the next patch. The fourth patch adds a new option to get a
new control message with the L2 length and interface index for incoming
packets with hardware timestamps.

The fifth patch fixes documentation on number of non-zero fields in
scm_timestamping and warns about false software timestamps when
SO_TIMESTAMP(NS) is combined with SCM_TIMESTAMPING.

The sixth patch adds a new option to request both software and hardware
timestamps for outgoing packets. The seventh patch updates drivers that
assumed software timestamping cannot be used together with hardware
timestamping.

The patches have been tested on x86_64 machines with igb and e1000e
drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some drivers were calling the skb_tx_timestamp() function only when
a hardware timestamp was not requested. Now that applications can use
the SOF_TIMESTAMPING_OPT_TX_SWHW option to request both software and
hardware timestamps, the drivers need to be modified to unconditionally
call skb_tx_timestamp().

CC: Richard Cochran <richardcochran@gmail.com>
CC: Willem de Bruijn <willemb@google.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add SOF_TIMESTAMPING_OPT_TX_SWHW option to allow an outgoing packet to
be looped to the socket's error queue with a software timestamp even
when a hardware transmit timestamp is expected to be provided by the
driver.

Applications using this option will receive two separate messages from
the error queue, one with a software timestamp and the other with a
hardware timestamp. As the hardware timestamp is saved to the shared skb
info, which may happen before the first message with software timestamp
is received by the application, the hardware timestamp is copied to the
SCM_TIMESTAMPING control message only when the skb has no software
timestamp or it is an incoming packet.

While changing sw_tx_timestamp(), inline it in skb_tx_timestamp() as
there are no other users.

CC: Richard Cochran <richardcochran@gmail.com>
CC: Willem de Bruijn <willemb@google.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The scm_timestamping struct may return multiple non-zero fields, e.g.
when both software and hardware RX timestamping is enabled, or when the
SO_TIMESTAMP(NS) option is combined with SCM_TIMESTAMPING and a false
software timestamp is generated in the recvmsg() call in order to always
return a SCM_TIMESTAMP(NS) message.

CC: Richard Cochran <richardcochran@gmail.com>
CC: Willem de Bruijn <willemb@google.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>