- 20 Jul, 2008 37 commits
-
-
Devin Heitmueller authored
- Separate the newer variant of the HVR-900 into its own device profile because it has a Micronas DRX397 instead of the Zarlink demod. This doesn't make the device work, but at least we don't try to initialize it as though it had the Zarlink device. Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> [mchehab@infradead.org: avoid compilation breakage at mainstream, where drx397xD.h doesn't exist yet] Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Tobias Lorenz authored
This patch brings the following changes: - this now finally adds hardware frequency seek support Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Tobias Lorenz authored
This patch brings the following changes: - afc indication: device has no indication whether freq is too low or too high therefore afc always return 1, when freq is wrong Signed-off-by:
-
Tobias Lorenz authored
This patch brings the following changes: - comment on how to listen to an usb audio device (i get so many questions about that...) - code cleanup (error handling, more warnings, spacing, ...) Signed-off-by:
-
Tobias Lorenz authored
This patch brings the following changes: - version bumped to 1.0.8 for all the following patches - si470x_get_freq now returns errno Signed-off-by:
-
Tobias Lorenz authored
this patch brings the following changes: - move the global disconnect lock into the device structure - code cleanup (spaces to tabs, long line splits, ...) Signed-off-by:
-
Devin Heitmueller authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Michael Krufky authored
Only one frontend is enabled right now. The second frontend can lock, but transport doesn't work yet. The device will be supported as a single tuner device until the second frontend is working. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
This file was renamed but we forgot to change it in the comments. Signed-off-by:
-
Dmitri Belimov authored
Rework saa7134_enable_i2s function. Add vendor specific data. Add definition for I2S audio output control register. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Antti Palosaari authored
- update license comments - change MODULE_DESCRIPTION from device specific to chipset specific - correct debug switch from deb_rc to deb_info - correct MPEG2 stream interval from 1.25 to 1 - change frontend_attach error code from -EIO to -ENODEV Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
- remove useless identify_state - device is always warm Signed-off-by:
-
Antti Palosaari authored
- coding style fixes raised by checkpatch Signed-off-by:
-
Hans Verkuil authored
The naming for the callbacks that handle the VIDIOC_ENUM_FMT and VIDIOC_S/G/TRY_FMT ioctls was very confusing. Renamed it to match the v4l2_buf_type name. Signed-off-by:
-
Hans Verkuil authored
V4L/DVB (7948): videodev: add missing vidioc_try_fmt_sliced_vbi_output and VIDIOC_ENUMOUTPUT handling There was no vidioc_try_fmt_sliced_vbi_output, instead vidioc_try_fmt_vbi_output was reused. The VIDIOC_ENUMOUTPUT handling was missing altogether, even though the callback existed. Signed-off-by:
-
Hans Verkuil authored
The default videodev behavior for VIDIOC_G_STD is not correct for all devices. Add a new callback that drivers can use instead. Signed-off-by:
-
Hans Verkuil authored
__video_do_ioctl incorrectly zeroed the tuner field of v4l2_frequency and did not zero the full fmt union of v4l2_format. Signed-off-by:
-
Tobias Lorenz authored
Signed-off-by:
-
Mike Isely authored
Back in the early days of the pvrusb2 driver, the kernel class mechanism in use for the sysfs interface had no means to pass per-attribute information to the show / store functions. This forced me to implement a horrible ugly thunking mechanism (i.e. infer the missing data through the use of dedicated cookie cutter bounce functions). However now we're using a better mechanism which also passes enough additional information to the show / store functions that we no longer need the hack. So eliminate all the crap. Yay! Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
The driver enforces a "quiet period" on the encoder in certain situations before attempting to operate it. This seems to help avoid video encoding errors / corruption. The quiet period was 50msec, but through experimentation it has been observed to improve further if the interval is increased to 100msec. Signed-off-by:
-
Mike Isely authored
This is primarily a cosmetic change to make it easier to change some of the time constants used in the driver. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Hans Verkuil authored
Separate gpio_init field and xceive_pin and combine the two when the gpio is initialized. So there is no longer any need to set the xceive pin in the gpio_init values, simplifying the creation of a new card definition. Signed-off-by:
-
Hans Verkuil authored
Thanks to Peter Brandt for doing the necessary tests to fill out the card definition! Signed-off-by:
-
Jean Delvare authored
snprinf() takes the trailing \0 into account in its length calculations, so there is no need to subtract 1 to the buffer size. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Antti Palosaari authored
- driver for Anysee DVB-T/C receiver Signed-off-by:
-
Antti Palosaari authored
- add Samsung DTOS403IH102A tuner Signed-off-by:
-
Antti Palosaari authored
- separate TDA10021 and TDA10023 attach - configurable Xtal settings - configurable input freq offset + baseband conversion type settings Signed-off-by:
-
Sakari Ailus authored
Add invertation of image mirroring register bits to default configuration. This is useful when the camera module is e.g. mounted upside down. Signed-off-by:
Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by:
-
Ian Armstrong authored
write() operations to the ivtv framebuffer will now attempt to use DMA if the amount of data to copy is >= 4096 bytes. This change effectively depreciates the need for the proprietary IVTVFB_IOC_DMA_FRAME ioctl since a write() of sufficient size will do the same thing. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
-
Michael Krufky authored
The pvrusb2 driver initially sets the tuner to known broadcast frequencies in the Chicago area, to ease driver testing for the maintainer. This patch keeps those default frequencies, but allows them to be altered via modprobe option. This allows the same ease and convenience for testing multiple pvrusb2 devices one after another under other conditions and areas. For instance, the default initial frequency, 175.25 MHz, might not necessarily be valid on all cable television networks, but usually will be a valid NTSC broadcast channel. Signed-off-by:
-
Adrian Bunk authored
This patch makes the following needlessly global code static: - pvrusb2-devattr.c: struct pvr2_onair_creator_fe_props - pvrusb2-devattr.c: struct pvr2_onair_usb2_fe_props - pvrusb2-devattr.c: struct pvr2_73xxx_dvb_props - pvrusb2-devattr.c: struct pvr2_750xx_dvb_props - pvrusb2-devattr.c: struct pvr2_751xx_dvb_props - pvrusb2-hdw.c:pvr2_led_ctrl_hauppauge() Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 17 Jul, 2008 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [PATCH] ocfs2: fix oops in mmap_truncate testing configfs: call drop_link() to cleanup after create_link() failure configfs: Allow ->make_item() and ->make_group() to return detailed errors. configfs: Fix failing mkdir() making racing rmdir() fail configfs: Fix deadlock with racing rmdir() and rename() configfs: Make configfs_new_dirent() return error code instead of NULL configfs: Protect configfs_dirent s_links list mutations configfs: Introduce configfs_dirent_lock ocfs2: Don't snprintf() without a format. ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs ocfs2/net: Silence build warnings on sparc64 ocfs2: Handle error during journal load ocfs2: Silence an error message in ocfs2_file_aio_read() ocfs2: use simple_read_from_buffer() ocfs2: fix printk format warnings with OCFS2_FS_STATS=n [PATCH 2/2] ocfs2: Instrument fs cluster locks [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: pcmcia: ide-cs: Remove outdated comment pcmcia: fix cisinfo_t removal pcmcia: fix return value in cm4000_cs.c
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix asm/e820.h for userspace inclusion x86: fix numaq_tsc_disable x86: fix kernel_physical_mapping_init() for large x86 systems
-
