- 18 Apr, 2017 7 commits
-
-
Chris Wilson authored
commit 3d3d18f0 upstream. The rcu_barrier() takes the cpu_hotplug mutex which itself is not reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker. [ 309.661373] ========================================================= [ 309.661376] [ INFO: possible irq lock inversion dependency detected ] [ 309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G W [ 309.661383] --------------------------------------------------------- [ 309.661386] gem_exec_gttfil/6435 just changed the state of lock: [ 309.661389] (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160 [ 309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past: [ 309.661402] (cpu_hotplug.lock){+.+.+.} [ 309.661404] and interrupts could create inverse lock ordering between them. [ 309.661410] other info that might help us debug this: [ 309.661414] Possible interrupt unsafe locking scenario: [ 309.661417] CPU0 CPU1 [ 309.661419] ---- ---- [ 309.661421] lock(cpu_hotplug.lock); [ 309.661425] local_irq_disable(); [ 309.661432] lock(rcu_preempt_state.barrier_mutex); [ 309.661441] lock(cpu_hotplug.lock); [ 309.661446] <Interrupt> [ 309.661448] lock(rcu_preempt_state.barrier_mutex); [ 309.661453] *** DEADLOCK *** [ 309.661460] 4 locks held by gem_exec_gttfil/6435: [ 309.661464] #0: (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0 [ 309.661475] #1: (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0 [ 309.661486] #2: (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0 [ 309.661495] #3: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915] [ 309.661540] the shortest dependencies between 2nd lock and 1st lock: [ 309.661547] -> (cpu_hotplug.lock){+.+.+.} ops: 829 { [ 309.661553] HARDIRQ-ON-W at: [ 309.661560] __lock_acquire+0x5e5/0x1b50 [ 309.661565] lock_acquire+0xc9/0x220 [ 309.661572] __mutex_lock+0x6e/0x990 [ 309.661576] mutex_lock_nested+0x16/0x20 [ 309.661583] get_online_cpus+0x61/0x80 [ 309.661590] kmem_cache_create+0x25/0x1d0 [ 309.661596] debug_objects_mem_init+0x30/0x249 [ 309.661602] start_kernel+0x341/0x3fe [ 309.661607] x86_64_start_reservations+0x2a/0x2c [ 309.661612] x86_64_start_kernel+0x173/0x186 [ 309.661619] verify_cpu+0x0/0xfc [ 309.661622] SOFTIRQ-ON-W at: [ 309.661627] __lock_acquire+0x611/0x1b50 [ 309.661632] lock_acquire+0xc9/0x220 [ 309.661636] __mutex_lock+0x6e/0x990 [ 309.661641] mutex_lock_nested+0x16/0x20 [ 309.661646] get_online_cpus+0x61/0x80 [ 309.661650] kmem_cache_create+0x25/0x1d0 [ 309.661655] debug_objects_mem_init+0x30/0x249 [ 309.661660] start_kernel+0x341/0x3fe [ 309.661664] x86_64_start_reservations+0x2a/0x2c [ 309.661669] x86_64_start_kernel+0x173/0x186 [ 309.661674] verify_cpu+0x0/0xfc [ 309.661677] RECLAIM_FS-ON-W at: [ 309.661682] mark_held_locks+0x6f/0xa0 [ 309.661687] lockdep_trace_alloc+0xb3/0x100 [ 309.661693] kmem_cache_alloc_trace+0x31/0x2e0 [ 309.661699] __smpboot_create_thread.part.1+0x27/0xe0 [ 309.661704] smpboot_create_threads+0x61/0x90 [ 309.661709] cpuhp_invoke_callback+0x9c/0x8a0 [ 309.661713] cpuhp_up_callbacks+0x31/0xb0 [ 309.661718] _cpu_up+0x7a/0xc0 [ 309.661723] do_cpu_up+0x5f/0x80 [ 309.661727] cpu_up+0xe/0x10 [ 309.661734] smp_init+0x71/0xb3 [ 309.661738] kernel_init_freeable+0x94/0x19e [ 309.661743] kernel_init+0x9/0xf0 [ 309.661748] ret_from_fork+0x2e/0x40 [ 309.661752] INITIAL USE at: [ 309.661757] __lock_acquire+0x234/0x1b50 [ 309.661761] lock_acquire+0xc9/0x220 [ 309.661766] __mutex_lock+0x6e/0x990 [ 309.661771] mutex_lock_nested+0x16/0x20 [ 309.661775] get_online_cpus+0x61/0x80 [ 309.661780] __cpuhp_setup_state+0x44/0x170 [ 309.661785] page_alloc_init+0x23/0x3a [ 309.661790] start_kernel+0x124/0x3fe [ 309.661794] x86_64_start_reservations+0x2a/0x2c [ 309.661799] x86_64_start_kernel+0x173/0x186 [ 309.661804] verify_cpu+0x0/0xfc [ 309.661807] } [ 309.661813] ... key at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100 [ 309.661817] ... acquired at: [ 309.661821] lock_acquire+0xc9/0x220 [ 309.661825] __mutex_lock+0x6e/0x990 [ 309.661829] mutex_lock_nested+0x16/0x20 [ 309.661833] get_online_cpus+0x61/0x80 [ 309.661837] _rcu_barrier+0x9f/0x160 [ 309.661841] rcu_barrier+0x10/0x20 [ 309.661847] netdev_run_todo+0x5f/0x310 [ 309.661852] rtnl_unlock+0x9/0x10 [ 309.661856] default_device_exit_batch+0x133/0x150 [ 309.661862] ops_exit_list.isra.0+0x4d/0x60 [ 309.661866] cleanup_net+0x1d8/0x2c0 [ 309.661872] process_one_work+0x1f4/0x6d0 [ 309.661876] worker_thread+0x49/0x4a0 [ 309.661881] kthread+0x107/0x140 [ 309.661884] ret_from_fork+0x2e/0x40 [ 309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 { [ 309.661896] HARDIRQ-ON-W at: [ 309.661901] __lock_acquire+0x5e5/0x1b50 [ 309.661905] lock_acquire+0xc9/0x220 [ 309.661910] __mutex_lock+0x6e/0x990 [ 309.661914] mutex_lock_nested+0x16/0x20 [ 309.661919] _rcu_barrier+0x31/0x160 [ 309.661923] rcu_barrier+0x10/0x20 [ 309.661928] netdev_run_todo+0x5f/0x310 [ 309.661932] rtnl_unlock+0x9/0x10 [ 309.661936] default_device_exit_batch+0x133/0x150 [ 309.661941] ops_exit_list.isra.0+0x4d/0x60 [ 309.661946] cleanup_net+0x1d8/0x2c0 [ 309.661951] process_one_work+0x1f4/0x6d0 [ 309.661955] worker_thread+0x49/0x4a0 [ 309.661960] kthread+0x107/0x140 [ 309.661964] ret_from_fork+0x2e/0x40 [ 309.661968] SOFTIRQ-ON-W at: [ 309.661972] __lock_acquire+0x611/0x1b50 [ 309.661977] lock_acquire+0xc9/0x220 [ 309.661981] __mutex_lock+0x6e/0x990 [ 309.661986] mutex_lock_nested+0x16/0x20 [ 309.661990] _rcu_barrier+0x31/0x160 [ 309.661995] rcu_barrier+0x10/0x20 [ 309.661999] netdev_run_todo+0x5f/0x310 [ 309.662003] rtnl_unlock+0x9/0x10 [ 309.662008] default_device_exit_batch+0x133/0x150 [ 309.662013] ops_exit_list.isra.0+0x4d/0x60 [ 309.662017] cleanup_net+0x1d8/0x2c0 [ 309.662022] process_one_work+0x1f4/0x6d0 [ 309.662027] worker_thread+0x49/0x4a0 [ 309.662031] kthread+0x107/0x140 [ 309.662035] ret_from_fork+0x2e/0x40 [ 309.662039] IN-RECLAIM_FS-W at: [ 309.662043] __lock_acquire+0x638/0x1b50 [ 309.662048] lock_acquire+0xc9/0x220 [ 309.662053] __mutex_lock+0x6e/0x990 [ 309.662058] mutex_lock_nested+0x16/0x20 [ 309.662062] _rcu_barrier+0x31/0x160 [ 309.662067] rcu_barrier+0x10/0x20 [ 309.662089] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662109] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662114] simple_attr_write+0xc7/0xe0 [ 309.662119] full_proxy_write+0x4f/0x70 [ 309.662124] __vfs_write+0x23/0x120 [ 309.662128] vfs_write+0xc6/0x1f0 [ 309.662133] SyS_write+0x44/0xb0 [ 309.662138] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662142] INITIAL USE at: [ 309.662147] __lock_acquire+0x234/0x1b50 [ 309.662151] lock_acquire+0xc9/0x220 [ 309.662156] __mutex_lock+0x6e/0x990 [ 309.662160] mutex_lock_nested+0x16/0x20 [ 309.662165] _rcu_barrier+0x31/0x160 [ 309.662169] rcu_barrier+0x10/0x20 [ 309.662174] netdev_run_todo+0x5f/0x310 [ 309.662178] rtnl_unlock+0x9/0x10 [ 309.662183] default_device_exit_batch+0x133/0x150 [ 309.662188] ops_exit_list.isra.0+0x4d/0x60 [ 309.662192] cleanup_net+0x1d8/0x2c0 [ 309.662197] process_one_work+0x1f4/0x6d0 [ 309.662202] worker_thread+0x49/0x4a0 [ 309.662206] kthread+0x107/0x140 [ 309.662210] ret_from_fork+0x2e/0x40 [ 309.662214] } [ 309.662220] ... key at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780 [ 309.662225] ... acquired at: [ 309.662229] check_usage_forwards+0x12b/0x130 [ 309.662233] mark_lock+0x360/0x6f0 [ 309.662237] __lock_acquire+0x638/0x1b50 [ 309.662241] lock_acquire+0xc9/0x220 [ 309.662245] __mutex_lock+0x6e/0x990 [ 309.662249] mutex_lock_nested+0x16/0x20 [ 309.662253] _rcu_barrier+0x31/0x160 [ 309.662257] rcu_barrier+0x10/0x20 [ 309.662279] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662298] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662303] simple_attr_write+0xc7/0xe0 [ 309.662307] full_proxy_write+0x4f/0x70 [ 309.662311] __vfs_write+0x23/0x120 [ 309.662315] vfs_write+0xc6/0x1f0 [ 309.662319] SyS_write+0x44/0xb0 [ 309.662323] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662329] stack backtrace: [ 309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G W 4.11.0-rc1-CI-CI_DRM_2333+ #1 [ 309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011 [ 309.662348] Call Trace: [ 309.662354] dump_stack+0x67/0x92 [ 309.662359] print_irq_inversion_bug.part.19+0x1a4/0x1b0 [ 309.662365] check_usage_forwards+0x12b/0x130 [ 309.662369] mark_lock+0x360/0x6f0 [ 309.662374] ? print_shortest_lock_dependencies+0x1a0/0x1a0 [ 309.662379] __lock_acquire+0x638/0x1b50 [ 309.662383] ? __mutex_unlock_slowpath+0x3e/0x2e0 [ 309.662388] ? trace_hardirqs_on+0xd/0x10 [ 309.662392] ? _rcu_barrier+0x31/0x160 [ 309.662396] lock_acquire+0xc9/0x220 [ 309.662400] ? _rcu_barrier+0x31/0x160 [ 309.662404] ? _rcu_barrier+0x31/0x160 [ 309.662409] __mutex_lock+0x6e/0x990 [ 309.662412] ? _rcu_barrier+0x31/0x160 [ 309.662416] ? _rcu_barrier+0x31/0x160 [ 309.662421] ? synchronize_rcu_expedited+0x35/0xb0 [ 309.662426] ? _raw_spin_unlock_irqrestore+0x52/0x60 [ 309.662434] mutex_lock_nested+0x16/0x20 [ 309.662438] _rcu_barrier+0x31/0x160 [ 309.662442] rcu_barrier+0x10/0x20 [ 309.662464] i915_gem_shrink_all+0x33/0x40 [i915] [ 309.662484] i915_drop_caches_set+0x141/0x150 [i915] [ 309.662489] simple_attr_write+0xc7/0xe0 [ 309.662494] full_proxy_write+0x4f/0x70 [ 309.662498] __vfs_write+0x23/0x120 [ 309.662503] ? rcu_read_lock_sched_held+0x75/0x80 [ 309.662507] ? rcu_sync_lockdep_assert+0x2a/0x50 [ 309.662512] ? __sb_start_write+0x102/0x210 [ 309.662516] ? vfs_write+0x17d/0x1f0 [ 309.662520] vfs_write+0xc6/0x1f0 [ 309.662524] ? trace_hardirqs_on_caller+0xe7/0x200 [ 309.662529] SyS_write+0x44/0xb0 [ 309.662533] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 309.662537] RIP: 0033:0x7f507eac24a0 [ 309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0 [ 309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005 [ 309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c [ 309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230 [ 309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0 [ 309.662572] ? __this_cpu_preempt_check+0x13/0x20 Fixes: 0eafec6d ("drm/i915: Enable lockless lookup of request tracking via RCU") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.ukReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit bd784b7c) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170321144531.12344-1-chris@chris-wilson.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit 8f68d591 upstream. On Baytrail, we manually calculate busyness over the evaluation interval to avoid issues with miscaluations with RC6 enabled. However, it turns out that the DOWN_EI interrupt generator is completely bust - it operates in two modes, continuous or never. Neither of which are conducive to good behaviour. Stop unmask the DOWN_EI interrupt and just compute everything from the UP_EI which does seem to correspond to the desired interval. v2: Fixup gen6_rps_pm_mask() as well v3: Inline vlv_c0_above() to combine the now identical elapsed calculation for up/down and simplify the threshold testing Fixes: 43cf3bf0 ("drm/i915: Improved w/a for rps on Baytrail") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-1-chris@chris-wilson.co.ukReviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170313170617.31564-1-chris@chris-wilson.co.uk (cherry picked from commit e0e8c7cb) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kenneth Graunke authored
commit 0f5418e5 upstream. This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0 (indicating the optional feature is not supported), and makes execbuf always return -EINVAL if the flags are used. Apparently, no userspace ever shipped which used this optional feature: I checked the git history of Mesa, xf86-video-intel, libva, and Beignet, and there were zero commits showing a use of these flags. Kernel commit 72bfa19c apparently introduced the feature prematurely. According to Chris, the intention was to use this in cairo-drm, but "the use was broken for gen6", so I don't think it ever happened. 'relative_constants_mode' has always been tracked per-device, but this has actually been wrong ever since hardware contexts were introduced, as the INSTPM register is saved (and automatically restored) as part of the render ring context. The software per-device value could therefore get out of sync with the hardware per-context value. This meant that using them is actually unsafe: a client which tried to use them could damage the state of other clients, causing the GPU to interpret their BO offsets as absolute pointers, leading to bogus memory reads. These flags were also never ported to execlist mode, making them no-ops on Gen9+ (which requires execlists), and Gen8 in the default mode. On Gen8+, userspace can write these registers directly, achieving the same effect. On Gen6-7.5, it likely makes sense to extend the command parser to support them. I don't think anyone wants this on Gen4-5. Based on a patch by Dave Gordon. v3: Return -ENODEV for the getparam, as this is what we do for other obsolete features. Suggested by Chris Wilson. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.orgAcked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170313170433.26843-1-chris@chris-wilson.co.uk (cherry picked from commit ef0f411f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit 35a3abfd upstream. In order to prevent accessing the hpd registers outside of the display power wells, we should refrain from writing to the registers before the display interrupts are enabled. [ 4.740136] WARNING: CPU: 1 PID: 221 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x44/0x50 [i915] [ 4.740155] Unclaimed read from register 0x1e1110 [ 4.740168] Modules linked in: i915(+) intel_gtt drm_kms_helper prime_numbers [ 4.740190] CPU: 1 PID: 221 Comm: systemd-udevd Not tainted 4.10.0-rc6+ #384 [ 4.740203] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 4.740220] Call Trace: [ 4.740236] dump_stack+0x4d/0x6f [ 4.740251] __warn+0xc1/0xe0 [ 4.740265] warn_slowpath_fmt+0x4a/0x50 [ 4.740281] ? insert_work+0x77/0xc0 [ 4.740355] ? fwtable_write32+0x90/0x130 [i915] [ 4.740431] __unclaimed_reg_debug+0x44/0x50 [i915] [ 4.740507] fwtable_read32+0xd8/0x130 [i915] [ 4.740575] i915_hpd_irq_setup+0xa5/0x100 [i915] [ 4.740649] intel_hpd_init+0x68/0x80 [i915] [ 4.740716] i915_driver_load+0xe19/0x1380 [i915] [ 4.740784] i915_pci_probe+0x32/0x90 [i915] [ 4.740799] pci_device_probe+0x8b/0xf0 [ 4.740815] driver_probe_device+0x2b6/0x450 [ 4.740828] __driver_attach+0xda/0xe0 [ 4.740841] ? driver_probe_device+0x450/0x450 [ 4.740853] bus_for_each_dev+0x5b/0x90 [ 4.740865] driver_attach+0x19/0x20 [ 4.740878] bus_add_driver+0x166/0x260 [ 4.740892] driver_register+0x5b/0xd0 [ 4.740906] ? 0xffffffffa0166000 [ 4.740920] __pci_register_driver+0x47/0x50 [ 4.740985] i915_init+0x5c/0x5e [i915] [ 4.740999] do_one_initcall+0x3e/0x160 [ 4.741015] ? __vunmap+0x7c/0xc0 [ 4.741029] ? kmem_cache_alloc+0xcf/0x120 [ 4.741045] do_init_module+0x55/0x1c4 [ 4.741060] load_module+0x1f3f/0x25b0 [ 4.741073] ? __symbol_put+0x40/0x40 [ 4.741086] ? kernel_read_file+0x100/0x190 [ 4.741100] SYSC_finit_module+0xbc/0xf0 [ 4.741112] SyS_finit_module+0x9/0x10 [ 4.741125] entry_SYSCALL_64_fastpath+0x17/0x98 [ 4.741135] RIP: 0033:0x7f8559a140f9 [ 4.741145] RSP: 002b:00007fff7509a3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.741161] RAX: ffffffffffffffda RBX: 00007f855aba02d1 RCX: 00007f8559a140f9 [ 4.741172] RDX: 0000000000000000 RSI: 000055b6db0914f0 RDI: 0000000000000011 [ 4.741183] RBP: 0000000000020000 R08: 0000000000000000 R09: 000000000000000e [ 4.741193] R10: 0000000000000011 R11: 0000000000000246 R12: 000055b6db0854d0 [ 4.741204] R13: 000055b6db091150 R14: 0000000000000000 R15: 000055b6db035924 v2: Set dev_priv->display_irqs_enabled to true for all platforms other than vlv/chv that manually control the display power domain. Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lyude <cpaul@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Hans de Goede <jwrdegoede@fedoraproject.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215131547.5064-1-chris@chris-wilson.co.uk Link: http://patchwork.freedesktop.org/patch/msgid/20170313170231.18633-1-chris@chris-wilson.co.uk (cherry picked from commit 262fd485) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mika Kuoppala authored
commit 34dc8993 upstream. Certain Baytrails, namely the 4 cpu core variants, have been plaqued by spurious system hangs, mostly occurring with light loads. Multiple bisects by various people point to a commit which changes the reclocking strategy for Baytrail to follow its bigger brethen: commit 8fb55197 ("drm/i915: Agressive downclocking on Baytrail") There is also a review comment attached to this commit from Deepak S on avoiding punit access on Cherryview and thus it was excluded on common reclocking path. By taking the same approach and omitting the punit access by not tweaking the thresholds when the hardware has been asked to move into different frequency, considerable gains in stability have been observed. With J1900 box, light render/video load would end up in system hang in usually less than 12 hours. With this patch applied, the cumulative uptime has now been 34 days without issues. To provoke system hang, light loads on both render and bsd engines in parallel have been used: glxgears >/dev/null 2>/dev/null & mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4 So far, author has not witnessed system hang with above load and this patch applied. Reports from the tenacious people at kernel bugzilla are also promising. Considering that the punit access frequency with this patch is considerably less, there is a possibility that this will push the, still unknown, root cause past the triggering point on most loads. But as we now can reliably reproduce the hang independently, we can reduce the pain that users are having and use a static thresholds until a root cause is found. v3: don't break debugfs and simplification (Chris Wilson) References: https://bugzilla.kernel.org/show_bug.cgi?id=109051 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: fritsch@xbmc.org Cc: miku@iki.fi Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> CC: Michal Feix <michal@feix.cz> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Deepak S <deepak.s@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487166779-26945-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 6067a27d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ville Syrjälä authored
commit edd06b83 upstream. printks are slow so we should not be doing them from the vblank evade critical section. These could explain why we sometimes seem to blow past our 100 usec deadline. The problem has been there ever since commit bfd16b2a ("drm/i915: Make updating pipe without modeset atomic.") but it may not have been readily visible until commit e1edbd44 ("drm/i915: Complain if we take too long under vblank evasion.") increased our chances of noticing it. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: bfd16b2a ("drm/i915: Make updating pipe without modeset atomic.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170307205419.19447-1-ville.syrjala@linux.intel.comReviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit c3f8ad57) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Imre Deak authored
commit d253371c upstream. After commit 2c7d0602 Author: Imre Deak <imre.deak@intel.com> Date: Mon Dec 5 18:27:37 2016 +0200 drm/i915/gen9: Fix PCODE polling during CDCLK change notification there is still one report of the CDCLK-change request timing out on a KBL machine, see the Reference link. On that machine the maximum time the request took to succeed was 34ms, so increase the timeout to 50ms. v2: - Change timeout from 100 to 50 ms to maintain the current 50 ms limit for atomic waits in the driver. (Chris, Tvrtko) Reference: https://bugs.freedesktop.org/show_bug.cgi?id=99345 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1487946730-17162-1-git-send-email-imre.deak@intel.com (cherry picked from commit 0129936d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 Apr, 2017 33 commits
-
-
Greg Kroah-Hartman authored
-
Matjaz Hegedic authored
[ Upstream commit bba8376a ] The reboot quirk for ASUS EeeBook X205TA contains a typo in DMI_PRODUCT_NAME, improperly referring to X205TAW instead of X205TA, which prevents the quirk from being triggered. The model X205TAW already has a reboot quirk of its own. This fix simply removes the inappropriate final letter W. Fixes: 90b28ded ("x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk") Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com> Link: http://lkml.kernel.org/r/1489064417-7445-1-git-send-email-matjaz.hegedic@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tobias Jakobi authored
[ Upstream commit d595259f ] This USB-SATA bridge chip is used in a StarTech enclosure for optical drives. Without the quirk MakeMKV fails during the key exchange with an installed BluRay drive: > Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' > occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:2' Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matjaz Hegedic authored
[ Upstream commit 3b3e7855 ] Without the parameter reboot=a, ASUS EeeBook X205TA/W will hang when it should reboot. This adds the appropriate quirk, thus fixing the problem. Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com> Link: http://lkml.kernel.org/r/1488737804-20681-1-git-send-email-matjaz.hegedic@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matjaz Hegedic authored
[ Upstream commit 90b28ded ] Without the parameter reboot=a, ASUS EeeBook X205TA will hang when it should reboot. This adds the appropriate quirk, thus fixing the problem. Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
João Paulo Rechi Vita authored
[ Upstream commit 71050ae7 ] Some Asus laptops that have an airplane-mode indicator LED, also have the WMI WLAN user bit set, and the following bits in their DSDT: Scope (_SB) { (...) Device (ATKD) { (...) Method (WMNB, 3, Serialized) { (...) If (LEqual (IIA0, 0x00010002)) { OWGD (IIA1) Return (One) } } } } So when asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store the wlan state, it drives the airplane-mode indicator LED (through the call to OWGD) in an inverted fashion: the LED is ON when airplane mode is OFF (since wlan is ON), and vice-versa. This commit skips registering RFKill switches at all for these laptops, to allow the asus-wireless driver to drive the airplane mode LED correctly through the ASHS ACPI device. Relying on the presence of ASHS and ASUS_WMI_DSTS_USER_BIT avoids adding DMI-based quirks for at least 21 different laptops. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kai-Chuan Hsieh authored
[ Upstream commit 8023eff1 ] The bluetooth adapter Atheros AR3012 can't be enumerated and make the bluetooth function broken. T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3362 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb The error is: usb 2-6: device not accepting address 7, error -62 usb usb2-port6: unable to enumerate USB device It is caused by adapter's connected port is mapped to xHC controller, but the xHCI is not supported by the usb device. The output of 'sudo lspci -nnxxx -s 00:14.0': 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) 00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00 10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00 40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00 50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00 60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00 d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00 e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00 f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00 By referencing Intel Platform Controller Hub(PCH) datasheet, the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h decides the setting of mapping the port to EHCI controller or xHC controller. And the port mapped to xHC will enable xHCI during bus resume. The setting of disabling bluetooth adapter's connected port is 0x000001D9. The value can be obtained by few times 1 bit flip operation. The suited configuration should have the 'lsusb -t' result with bluetooth using ehci: /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M |__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M |__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com> Acked-by: Corentin Chary <corentin.chary@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [andy: resolve merge conflict in asus-wmi.h] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
[ Upstream commit 0b445549 ] In soft (no-reboot) mode, the driver self-pings watchdog upon expiration of an interrupt. However the interrupt itself was not cleared thus on first hit, the system enters infinite interrupt handling loop. On Odroid U3 (Exynos4412), when booted with s3c2410_wdt.soft_noboot=1 argument the console is flooded: # killall -9 watchdog [ 60.523760] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq) [ 60.536744] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq) Fix this by writing something to the WTCLRINT register to clear the interrupt. The register WTCLRINT however appeared in S3C6410 so a new watchdog quirk and flavor are needed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sinan Kaya authored
[ Upstream commit 33be632b ] The Qualcomm QDF2xxx root ports don't advertise an ACS capability, but they do provide ACS-like features to disable peer transactions and validate bus numbers in requests. To be specific: * Hardware supports source validation but it will report the issue as Completer Abort instead of ACS Violation. * Hardware doesn't support peer-to-peer and each root port is a root complex with unique segment numbers. * It is not possible for one root port to pass traffic to the other root port. All PCIe transactions are terminated inside the root port. Add an ACS quirk for the QDF2400 and QDF2432 products. [bhelgaas: changelog] Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
[ Upstream commit cd3e2eb8 ] Sort the list of Intel devices that have no PCI D3 delay by ID. Add a comment for group of devices that had not been marked yet. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
yangbo lu authored
[ Upstream commit e9acc77d ] Initially all QorIQ platforms were PowerPC architecture and they didn't support card detection except several platforms. The driver added the quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION as default and this made broken-cd property in dts node didn't work. Now QorIQ platform turns to ARM architecture and most of them could support card detection. However it's a large number of dts trees that need to be fixed with broken-cd if we remove the default SDHCI_QUIRK_BROKEN_CARD_DETECTION in driver. And the users don't want to see this. So this patch is to remove this default quirk just for ARM and keep it for PowerPC.(Note, QorIQ PowerPC platform only has big-endian eSDHC while QorIQ ARM platform has big-endian or little-endian eSDHC) This makes broken-cd property work again for ARM. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dongdong Liu authored
[ Upstream commit 72f2ff0d ] The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it cannot generate MSIs. It can transfer MSI/MSI-X from downstream devices, but does not support MSI/MSI-X itself. Add a quirk to prevent use of MSI/MSI-X by the Root Port. [bhelgaas: changelog, sort vendor ID #define, drop device ID #define] Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jon Mason authored
[ Upstream commit ce709f86 ] The Broadcom Northstar2 SoC has a number of quirks for the PAXC (internal/fake) PCI bus. Specifically, the PCI config space is shared between the root port and the first PF (ie., PF0), and a number of fields are tied to zero (thus preventing them from being set). These cannot be "fixed" in device firmware, so we must fix them with a quirk. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Will Deacon authored
[ Upstream commit 3046ec67 ] Commit 680a0873 ("arm: kernel: Add SMC structure parameter") added a new "quirk" parameter to the SMC and HVC SMCCC backends, but only updated the comment for the SMC version. This patch adds the new paramater to the comment describing the HVC version too. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baoyou Xie authored
[ Upstream commit a5725ab0 ] We get 2 warnings when building kernel with W=1: drivers/gpu/drm/msm/adreno/a3xx_gpu.c:535:17: warning: no previous prototype for 'a3xx_gpu_init' [-Wmissing-prototypes] drivers/gpu/drm/msm/adreno/a4xx_gpu.c:624:17: warning: no previous prototype for 'a4xx_gpu_init' [-Wmissing-prototypes] In fact, both functions are declared in drivers/gpu/drm/msm/adreno/adreno_device.c, but should be declared in a header file. So this patch moves both function declarations to drivers/gpu/drm/msm/adreno/adreno_gpu.h. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477127865-9381-1-git-send-email-baoyou.xie@linaro.orgSigned-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Gross authored
[ Upstream commit 82bcd087 ] This patch adds a Qualcomm specific quirk to the arm_smccc_smc call. On Qualcomm ARM64 platforms, the SMC call can return before it has completed. If this occurs, the call can be restarted, but it requires using the returned session ID value from the interrupted SMC call. The quirk stores off the session ID from the interrupted call in the quirk structure so that it can be used by the caller. This patch folds in a fix given by Sricharan R: https://lkml.org/lkml/2016/9/28/272Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Gross authored
[ Upstream commit 680a0873 ] This patch adds a quirk parameter to the arm_smccc_(smc/hvc) calls. The quirk structure allows for specialized SMC operations due to SoC specific requirements. The current arm_smccc_(smc/hvc) is renamed and macros are used instead to specify the standard arm_smccc_(smc/hvc) or the arm_smccc_(smc/hvc)_quirk function. This patch and partial implementation was suggested by Will Deacon. Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ping Cheng authored
[ Upstream commit e7deb157 ] Non-generic devices have numbered_buttons set for both pen and touch interfaces by default. The actual number of buttons on the interface is normally manually decided later, which is different from what those HID generic devices are processed, where number of buttons are directly retrieved from HID descriptors. This patch adds the missed HID_GENERIC check and moves the statement to wacom_setup_pad_input_capabilities since it's not a quirk anymore. Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mylène Josserand authored
[ Upstream commit 2ad6f30d ] Some SoCs have a reset line that must be asserted/deasserted. This patch adds a quirk to handle the new compatible "allwinner,sun6i-a31-i2s" which will deassert the reset line on probe function and assert it on remove's one. This new compatible is useful in case of A33 codec driver, for example. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Rui authored
[ Upstream commit cbc00c13 ] In commit 821d6f03 (ACPI / sleep: Do not save NVS for new machines to accelerate S3), to optimize S3 suspend/resume speed, code is introduced to ignore NVS memory saving during S3 for all the platforms later than 2012. But, Lenovo G50-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431Tested-by: Przemek <soprwa@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Drop unnecessary code ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pierre-Louis Bossart authored
[ Upstream commit a50477e5 ] The existing code assumes a 19.2 MHz MCLK as the default hardware configuration. This is valid for CherryTrail but not for Baytrail. Add explicit MCLK configuration to set the 19.2 clock on/off depending on DAPM events. This is a prerequisite step to enable devices with Baytrail and RT5645 such as Asus X205TA Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pierre-Louis Bossart authored
[ Upstream commit 42648c22 ] Fix classic issue of having multiple codecs listed in DSDT but a single one actually enabled. The previous code did not handle such errors and could also lead to uninitalized configurations Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pierre-Louis Bossart authored
[ Upstream commit fd0138dc ] the BIOS reports this codec as RT5640 but it's a rt5670. Use the quirk mechanism to use the cht_bsw_rt5672 machine driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pierre-Louis Bossart authored
[ Upstream commit 93ffeaa8 ] the BIOS incorrectly reports this codec as 5640 but it is really a rt5670 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
[ Upstream commit d2528006 ] rt5670 driver supports also RT5672 codec, but its ACPI ID is missing. This was found on Dell Wyse 3040 box. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lv Zheng authored
[ Upstream commit 77e9a4aa ] More and more platforms need the button.lid_init_state=open quirk. This patch sets it the default behavior. If a platform doesn't send lid open event or lid open event is lost due to the underlying system problems, then we can compare various combinations: 1. systemd/acpid is used to suspend system or not, systemd has a special logic forcing open event after resuming; 2. _LID returns a cached value or not. The result is as follows: 1. lid_init_state=method 1. cached 1. resumed by lid: (x) event=close (x) systemd=suspends again (x) acpid=suspends again (x) state=close 2. resumed by other: (o) event=close (x) systemd=suspends again (x) acpid=suspends again (o) state=close 2. non-cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (o) state=open 2. resumed by other: (o) event=close (x) systemd=suspends again (x) acpid=suspends again (o) state=close 2. lid_init_state=open 1. cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (x) state=close 2. resumed by other: (x) event=open (o) systemd=resumes (o) acpid=resumes (o) state=close 2. non-cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (o) state=open 2. resumed by other: (x) event=open (o) systemd=resumes (o) acpid=resumes (o) state=close 3. lid_init_state=ignore 1. cached 1. resumed by lid: (o) event=none (x) systemd=suspends again (o) acpid=resumes (x) state=close 2. resumed by other: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=close 2. non-cached 1. resumed by lid: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=open 2. resumed by other: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=close As a conclusion: 1. With systemd changed, lid_init_state=ignore has only one problem and the problem comes from an underlying issue, not userspace and kernel lid handling. 2. Without systemd changed, lid_init_state=open can be the default behavior as the pass ratio is not much worse than lid_init_state=ignore. 3. lid_init_state=method is buggy, we can have a separate patch to make it deprectated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=187271Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bartosz Golaszewski authored
[ Upstream commit f4d435f3 ] There's an issue with the da850 SATA controller: if port multiplier support is compiled in, but we're connecting the drive directly to the SATA port on the board, the drive can't be detected. To make SATA work on the da850-lcdk board: first try to softreset with pmp - if the operation fails with -EBUSY, retry without pmp. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Williamson authored
[ Upstream commit 7184f5b4 ] Intel 200-series chipsets have the same errata as 100-series: the ACS capability doesn't follow the PCIe spec, the capability and control registers are dwords rather than words. Add PCIe root port device IDs to existing quirk. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Patrice Chotard authored
[ Upstream commit 8413299c ] Since v4.10-rc1, the following logs appears in loop : [ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 801.966611] usb usb6-port1: cannot disable (err = -32) [ 806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 806.096494] usb usb6-port1: cannot disable (err = -32) After analysis, xhci try to set link in U3 and returns an error. Using snps,dis_u3_susphy_quirk fix this issue. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Vetter authored
[ Upstream commit 858b2c1b ] It's only for a device quirk, and we might as well do that in the load callback. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-10-daniel.vetter@ffwll.chSigned-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felipe Balbi authored
[ Upstream commit e42a5dbb ] dwc3 revisions <=3.00a have a limitation where Port Disable command doesn't work. Set the quirk-broken-port-ped property for such controllers so XHCI core can do the necessary workaround. [rogerq@ti.com] Updated code from platform data to device property. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felipe Balbi authored
[ Upstream commit 21939f00 ] In case 'quirk-broken-port-ped' property is passed in via device property, we should enable the corresponding BROKEN_PED quirk flag for XHCI core. [rogerq@ti.com] Updated code from platform data to device property and added DT binding. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felipe Balbi authored
[ Upstream commit 41135de1 ] Some devices from Texas Instruments [1] suffer from a silicon bug where Port Enabled/Disabled bit should not be used to silence an erroneous device. The bug is so that if port is disabled with PED bit, an IRQ for device removal (or attachment) will never fire. Just for the sake of completeness, the actual problem lies with SNPS USB IP and this affects all known versions up to 3.00a. A separate patch will be added to dwc3 to enabled this quirk flag if version is <= 3.00a. [1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf Section i896— USB xHCI Port Disable Feature Does Not Work Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-