Fix unconditional re-enabling of interrupts in various operation
functions that can all be called with local interrupts disabled from USB
completion handlers.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

We don't want to bind to the ES1 device, that would be bad.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix three related memory leaks in the init an exit callbacks, where the
gpio-lines array was never freed at all and the controller data wasn't
freed in the init error path.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Adds gpio interrupt handling support using an irqchip/irqdomain
instantiation inside the GB GPIO driver. This implementation works
on older kernels such as 3.10 that do not have the gpiolib irqchip
helpers. Any line on a Greybus gpiochip may be configured as an
interrupt. Once configured, IRQ event messages received from a
module fire off the registered interrupt handler.
Signed-off-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Make sure to release the spin lock protecting the interface bundle lists
before tearing down the connections and removing the bundle device,
which are operations that may sleep.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Use GFP_ATOMIC for IDA memory allocations under spin lock, which must
not sleep.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Export gb_operation_response_send() for other modules
Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

- Fixed incorrect use of $$GREYBUS_SRC_PATH variable
- Added quotes around find pattern to stop shell expansion of "*"
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

When initializing the USB device, we were starting up the svc message
queue before the cport urbs were allocated.  This might not be an issue
for "slower" machines, but not having any allocated urbs for a cport
might be an issue if we were to handle svc messages.

So wait until everything is properly initialized and allocated before
starting the svc urb.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

SVC messages come in in an "order", so don't mess them up by processing
them out of order.  Fix this by making our work queue ordered, which
should keep everything in line.
Reported-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

We now have several modules generated by the greybus build.
Let's add any *.ko files we find to the buid.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Make sure destination for greybus modules is consistent and easier to maintain
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This reverts commit 241b5fefc54eae95239b0f7dc4e2b0db49457729 as it's
wrong, we want to insert into the correct place in the list.
Reported-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This reverts commit 57131bf309d34568dd3b8f8e9da7a7ba25e9495e, it isn't
going to be needed as the patch this fixes will be reverted.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

'gb_i2c_transfer_request' is the name given to a function and a struct. Though
we don't get any compilation errors/warnings about it, but the names should be
unique.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

'gb_i2c_transfer_response' is the name given to a function and a struct. Though
we don't get any compilation errors/warnings about it, but the names should be
unique.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

__gb_protocol_register check if the protocol is not already registred,
and then register it. It register in existing->lists but at this point,
existing is always NULL (we exist just before if not).
Use gb_protocols instead.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

These aren't used anymore and so can be removed.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This gets rid of lots of duplication of code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Request type for all other protocols is defined like: GB_<protocol>_TYPE_<operation>,
but for UART is like: GB_<protocol>_REQ_<operation>.

Replace REQ with TYPE to make it consistent. It will also be useful in a later
patch that creates get_version() routines with the help of a macro.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Some files are still prefixed with "gb-" with the reasoning that the modules
would be named so, i.e.  gb-*.ko. But this can be done by playing a bit in
Makefile instead and keep uniform naming of .c files.

Lets try it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Some files are prefixed with "gb-" and some are suffixed with "-gb". The
rationale behind the first one is that the modules would be named so, i.e.
gb-*.ko. But there is no reason to keep the "-gb" suffix in the second case.

Remove the unnecessary suffix.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is just a copy of ES1 for now, things will start to diverge soon.
Any common functionality will be factored out over time.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

In next_free_urb(), just return usb_alloc_urb(), don't waste the time
assigning it to a local variable that we then return.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

in protocol register replace the protocol find code with the call to the already
existing function.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

if error is return when submiting the urb, we need to make sure to release the
urb from the pool, or from the dinamicly allocated. As in it, factor out the free
code and create the free_urb function.
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

just return the result of usb_alloc_urb up, no need to rededunt check for NULL
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

An extra reference is taken out on an operation in
gb_operation_request_send(). If the response never arrives, we need to
put back the reference.
Signed-off-by: Perry Hung <perry@leaflabs.com>
Tested-by: Mitchell Tasman <tasman@leaflabs.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

If an operation is issued and the response never comes back,
gb_operation_timeout() cancels the operation but never wakes up the
waiter in gb_operation_request_send().

This patch removes the timeout workqueue and changes the request wait to
wait_for_completion_interruptible_timeout(), with timeout set to
OPERATION_TIMEOUT_DEFAULT.
Signed-off-by: Perry Hung <perry@leaflabs.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

offset is defined as unsigned so there is no point checking for
negative values of offset.
Signed-off-by: Bill Pemberton <wfp5p@worldbroken.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Bill Pemberton <wfp5p@worldbroken.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

val is an unsigned long so there is no point in checking if it is less
than zero.
Signed-off-by: Bill Pemberton <wfp5p@worldbroken.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This .c file isn't needed by the kernel driver, it's there for firmware
developers only, so just move it into the Documentation directory to
reduce confusion.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Use the "gb-" prefix for the ES1 Host controller driver.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Use the "gb" prefix for module names, not a suffix.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Use the "gb" prefix for module names, not a suffix.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

This module provides the Bridged PHY protocols, so name the thing
properly.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Reviewed-by: Alex Elder <elder@linaro.org>

Provide an install Makefile target for those that want to install the
kernel modules.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

--
v3: resend to list, somehow this thread got taken private and v2 never
    made it there.

v2: add -a option to depmod, thanks to Mitchell