- 28 Aug, 2019 23 commits
-
-
Takashi Iwai authored
A similar workaround for the suspend/resume problem is needed for yet another ASUS machines, P6X models. Like the previous fix, the BIOS doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_* entries are used instead. Reported-and-tested-by:
SteveM <swm@swm1.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: flower: fix bugs in merge tunnel encap code John says: There are few bugs in the merge encap code that have come to light with recent driver changes. Effectively, flow bind callbacks were being registered twice when using internal ports (new 'busy' code triggers this). There was also an issue with neighbour notifier messages being ignored for internal ports. ==================== Signed-off-by: -
John Hurley authored
Recent code changes to NFP allowed the offload of neighbour entries to FW when the next hop device was an internal port. This allows for offload of tunnel encap when the end-point IP address is applied to such a port. Unfortunately, the neighbour event handler still rejects events that are not associated with a repr dev and so the firmware neighbour table may get out of sync for internal ports. Fix this by allowing internal port neighbour events to be correctly processed. Fixes: 45756dfe ("nfp: flower: allow tunnels to output to internal port") Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
John Hurley authored
Internal port TC offload is implemented through user-space applications (such as OvS) by adding filters at egress via TC clsact qdiscs. Indirect block offload support in the NFP driver accepts both ingress qdisc binds and egress binds if the device is an internal port. However, clsact sends bind notification for both ingress and egress block binds which can lead to the driver registering multiple callbacks and receiving multiple notifications of new filters. Fix this by rejecting ingress block bind callbacks when the port is internal and only adding filter callbacks for egress binds. Fixes: 4d12ba42 ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: fix side effect v3: Update the commit message for patch #1. v2: Replace patch #2 with "r8152: remove calling netif_napi_del". v1: The commit 0ee1f473 ("r8152: napi hangup fix after disconnect") add a check to avoid using napi_disable after netif_napi_del. However, the commit ffa9fec3 ("r8152: set RTL8152_UNPLUG only for real disconnection") let the check useless. Therefore, I revert commit 0ee1f473 ("r8152: napi hangup fix after disconnect") first, and add another patch to fix it. ==================== Signed-off-by:
-
Hayes Wang authored
Remove unnecessary use of netif_napi_del. This also avoids to call napi_disable() after netif_napi_del(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Hayes Wang authored
This reverts commit 0ee1f473. The commit 0ee1f473 ("r8152: napi hangup fix after disconnect") adds a check about RTL8152_UNPLUG to determine if calling napi_disable() is invalid in rtl8152_close(), when rtl8152_disconnect() is called. This avoids to use napi_disable() after calling netif_napi_del(). Howver, commit ffa9fec3 ("r8152: set RTL8152_UNPLUG only for real disconnection") causes that RTL8152_UNPLUG is not always set when calling rtl8152_disconnect(). Therefore, I have to revert commit 0ee1f473 ("r8152: napi hangup fix after disconnect"), first. And submit another patch to fix it. Signed-off-by:
-
Davide Caratti authored
Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of 'TCQ_F_NOLOCK' bit in the parent qdisc, we can't assume anymore that per-cpu counters are there in the error path of skb_array_produce(). Otherwise, the following splat can be seen: Unable to handle kernel paging request at virtual address 0000600dea430008 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 64k pages, 48-bit VAs, pgdp = 000000007b97530e [0000600dea430008] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] SMP [...] pstate: 10000005 (nzcV daif -PAN -UAO) pc : pfifo_fast_enqueue+0x524/0x6e8 lr : pfifo_fast_enqueue+0x46c/0x6e8 sp : ffff800d39376fe0 x29: ffff800d39376fe0 x28: 1ffff001a07d1e40 x27: ffff800d03e8f188 x26: ffff800d03e8f200 x25: 0000000000000062 x24: ffff800d393772f0 x23: 0000000000000000 x22: 0000000000000403 x21: ffff800cca569a00 x20: ffff800d03e8ee00 x19: ffff800cca569a10 x18: 00000000000000bf x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: ffff1001a726edd0 x13: 1fffe4000276a9a4 x12: 0000000000000000 x11: dfff200000000000 x10: ffff800d03e8f1a0 x9 : 0000000000000003 x8 : 0000000000000000 x7 : 00000000f1f1f1f1 x6 : ffff1001a726edea x5 : ffff800cca56a53c x4 : 1ffff001bf9a8003 x3 : 1ffff001bf9a8003 x2 : 1ffff001a07d1dcb x1 : 0000600dea430000 x0 : 0000600dea430008 Process ping (pid: 6067, stack limit = 0x00000000dc0aa557) Call trace: pfifo_fast_enqueue+0x524/0x6e8 htb_enqueue+0x660/0x10e0 [sch_htb] __dev_queue_xmit+0x123c/0x2de0 dev_queue_xmit+0x24/0x30 ip_finish_output2+0xc48/0x1720 ip_finish_output+0x548/0x9d8 ip_output+0x334/0x788 ip_local_out+0x90/0x138 ip_send_skb+0x44/0x1d0 ip_push_pending_frames+0x5c/0x78 raw_sendmsg+0xed8/0x28d0 inet_sendmsg+0xc4/0x5c0 sock_sendmsg+0xac/0x108 __sys_sendto+0x1ac/0x2a0 __arm64_sys_sendto+0xc4/0x138 el0_svc_handler+0x13c/0x298 el0_svc+0x8/0xc Code: f9402e80 d538d081 91002000 8b010000 (885f7c03) Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags', before dereferencing 'qdisc->cpu_qstats'. Fixes: 8a53e616 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too") CC: Paolo Abeni <pabeni@redhat.com> CC: Stefano Brivio <sbrivio@redhat.com> Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Willem de Bruijn authored
TCP associates tx timestamp requests with a byte in the bytestream. If merging skbs in tcp_mtu_probe, migrate the tstamp request. Similar to MSG_EOR, do not allow moving a timestamp from any segment in the probe but the last. This to avoid merging multiple timestamps. Tested with the packetdrill script at https://github.com/wdebruij/packetdrill/commits/mtu_probe-1 Link: http://patchwork.ozlabs.org/patch/1143278/#2232897 Fixes: 4ed2d765 ("net-timestamp: TCP timestamping") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Vlad Buslov authored
Action sample doesn't properly handle psample_group pointer in overwrite case. Following issues need to be fixed: - In tcf_sample_init() function RCU_INIT_POINTER() is used to set s->psample_group, even though we neither setting the pointer to NULL, nor preventing concurrent readers from accessing the pointer in some way. Use rcu_swap_protected() instead to safely reset the pointer. - Old value of s->psample_group is not released or deallocated in any way, which results resource leak. Use psample_group_put() on non-NULL value obtained with rcu_swap_protected(). - The function psample_group_put() that released reference to struct psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu grace period when deallocating it. Extend struct psample_group with rcu head and use kfree_rcu when freeing it. Fixes: 5c5670fa ("net/sched: Introduce sample tc action") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Thomas Falcon authored
Currently, the ibmvnic driver will not schedule device resets if the device is being removed, but does not check the device state before the reset is actually processed. This leads to a race where a reset is scheduled with a valid device state but is processed after the driver has been removed, resulting in an oops. Fix this by checking the device state before processing a queued reset event. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Justin Pettit authored
Only the first fragment in a datagram contains the L4 headers. When the Open vSwitch module parses a packet, it always sets the IP protocol field in the key, but can only set the L4 fields on the first fragment. The original behavior would not clear the L4 portion of the key, so garbage values would be sent in the key for "later" fragments. This patch clears the L4 fields in that circumstance to prevent sending those garbage values as part of the upcall. Signed-off-by:
Justin Pettit <jpettit@ovn.org> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Greg Rose authored
When IP fragments are reassembled before being sent to conntrack, the key from the last fragment is used. Unless there are reordering issues, the last fragment received will not contain the L4 ports, so the key for the reassembled datagram won't contain them. This patch updates the key once we have a reassembled datagram. The handle_fragments() function works on L3 headers so we pull the L3/L4 flow key update code from key_extract into a new function 'key_extract_l3l4'. Then we add a another new function ovs_flow_key_update_l3l4() and export it so that it is accessible by handle_fragments() for conntrack packet reassembly. Co-authored-by:
Greg Rose <gvrose8192@gmail.com> Acked-by:
-
Eric Dumazet authored
Similar to the fix done for IPv4 in commit e5b1c6c6 ("igmp: fix memory leak in igmpv3_del_delrec()"), we need to make sure mca_tomb and mca_sources are not blindly overwritten. Using swap() then a call to ip6_mc_clear_src() will take care of the missing free. BUG: memory leak unreferenced object 0xffff888117d9db00 (size 64): comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline] [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline] [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548 [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline] [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline] [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline] [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356 [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449 [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748 [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944 [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558 [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139 [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline] [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline] [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097 [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1666d49e ("mld: do not remove mld souce list info when set link down") Fixes: 9c8bb163 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Davide Caratti authored
Now that 'TCQ_F_CPUSTATS' bit can be cleared, depending on the value of 'TCQ_F_NOLOCK' bit in the parent qdisc, we need to be sure that per-cpu counters are present when 'reset()' is called for pfifo_fast qdiscs. Otherwise, the following script: # tc q a dev lo handle 1: root htb default 100 # tc c a dev lo parent 1: classid 1:100 htb \ > rate 95Mbit ceil 100Mbit burst 64k [...] # tc f a dev lo parent 1: protocol arp basic classid 1:100 [...] # tc q a dev lo parent 1:100 handle 100: pfifo_fast [...] # tc q d dev lo root can generate the following splat: Unable to handle kernel paging request at virtual address dfff2c01bd148000 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [dfff2c01bd148000] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] SMP [...] pstate: 80000005 (Nzcv daif -PAN -UAO) pc : pfifo_fast_reset+0x280/0x4d8 lr : pfifo_fast_reset+0x21c/0x4d8 sp : ffff800d09676fa0 x29: ffff800d09676fa0 x28: ffff200012ee22e4 x27: dfff200000000000 x26: 0000000000000000 x25: ffff800ca0799958 x24: ffff1001940f332b x23: 0000000000000007 x22: ffff200012ee1ab8 x21: 0000600de8a40000 x20: 0000000000000000 x19: ffff800ca0799900 x18: 0000000000000000 x17: 0000000000000002 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: ffff1001b922e6e2 x11: 1ffff001b922e6e1 x10: 0000000000000000 x9 : 1ffff001b922e6e1 x8 : dfff200000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 1fffe400025dc45c x4 : 1fffe400025dc357 x3 : 00000c01bd148000 x2 : 0000600de8a40000 x1 : 0000000000000007 x0 : 0000600de8a40004 Call trace: pfifo_fast_reset+0x280/0x4d8 qdisc_reset+0x6c/0x370 htb_reset+0x150/0x3b8 [sch_htb] qdisc_reset+0x6c/0x370 dev_deactivate_queue.constprop.5+0xe0/0x1a8 dev_deactivate_many+0xd8/0x908 dev_deactivate+0xe4/0x190 qdisc_graft+0x88c/0xbd0 tc_get_qdisc+0x418/0x8a8 rtnetlink_rcv_msg+0x3a8/0xa78 netlink_rcv_skb+0x18c/0x328 rtnetlink_rcv+0x28/0x38 netlink_unicast+0x3c4/0x538 netlink_sendmsg+0x538/0x9a0 sock_sendmsg+0xac/0xf8 ___sys_sendmsg+0x53c/0x658 __sys_sendmsg+0xc8/0x140 __arm64_sys_sendmsg+0x74/0xa8 el0_svc_handler+0x164/0x468 el0_svc+0x10/0x14 Code: 910012a0 92400801 d343fc03 11000c21 (38fb6863) Fix this by testing the value of 'TCQ_F_CPUSTATS' bit in 'qdisc->flags', before dereferencing 'qdisc->cpu_qstats'. Changes since v1: - coding style improvements, thanks to Stefano Brivio Fixes: 8a53e616 ("net: sched: when clearing NOLOCK, clear TCQ_F_CPUSTATS, too") CC: Paolo Abeni <pabeni@redhat.com> Reported-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
David S. Miller authored
Yash Shah says: ==================== macb: Update ethernet compatible string for SiFive FU540 This patch series renames the compatible property to a more appropriate string. The patchset is based on Linux-5.3-rc6 and tested on SiFive Unleashed board Change history: Since v1: - Dropped PATCH3 because it's already merged - Change the reference url in the patch descriptions to point to a 'lore.kernel.org' link instead of 'lkml.org' ==================== Signed-off-by: -
Yash Shah authored
Update the compatibility string for SiFive FU540-C000 as per the new string updated in the binding doc. Reference: https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/Signed-off-by:
Yash Shah <yash.shah@sifive.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by:
Paul Walmsley <paul.walmsley@sifive.com> Tested-by:
-
Yash Shah authored
As per the discussion with Nicolas Ferre[0], rename the compatible property to a more appropriate and specific string. [0] https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Eric Dumazet authored
Vladimir Rutsky reported stuck TCP sessions after memory pressure events. Edge Trigger epoll() user would never receive an EPOLLOUT notification allowing them to retry a sendmsg(). Jason tested the case of sk_stream_alloc_skb() returning NULL, but there are other paths that could lead both sendmsg() and sendpage() to return -1 (EAGAIN), with an empty skb queued on the write queue. This patch makes sure we remove this empty skb so that Jason code can detect that the queue is empty, and call sk->sk_write_space(sk) accordingly. Fixes: ce5ec440 ("tcp: ensure epoll edge trigger wakeup when write queue is empty") Signed-off-by:
Vladimir Rutsky <rutsky@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Ka-Cheong Poon authored
The rds6_inc_info_copy() function has a couple struct members which are leaking stack information. The ->tos field should hold actual information and the ->flags field needs to be zeroed out. Fixes: 3eb45036 ("rds: add type of service(tos) infrastructure") Fixes: b7ff8b10 ("rds: Extend RDS API for IPv6 support") Reported-by:
黄ID蝴蝶 <butterflyhuangxx@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Feng Sun authored
After commit baeababb ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by:
Feng Sun <loyou85@gmail.com> Signed-off-by:
Xiaojun Zhao <xiaojunzhao141@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
After witnessing the discussion in https://lkml.org/lkml/2019/8/14/151 w.r.t. ioctl extensibility, it became clear that such an issue might prevent that the 3 RSV bits inside the DSA 802.1Q tag might also suffer the same fate and be useless for further extension. So clearly specify that the reserved bits should currently be transmitted as zero and ignored on receive. The DSA tagger already does this (and has always did), and is the only known user so far (no Wireshark dissection plugin, etc). So there should be no incompatibility to speak of. Fixes: 0471dd42 ("net: dsa: tag_8021q: Create a stable binary format") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Marco Hartmann authored
Commit 34786005 ("net: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_aneg") introduced a check that aborts phy_config_aneg() if the phy is a C45 phy. This causes phy_state_machine() to call phy_error() so that the phy ends up in PHY_HALTED state. Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg() (analogous to the C22 case) so that the state machine can run correctly. genphy_c45_config_aneg() closely resembles mv3310_config_aneg() in drivers/net/phy/marvell10g.c, excluding vendor specific configurations for 1000BaseT. Fixes: 22b56e82 ("net: phy: replace genphy_10g_driver with genphy_c45_driver") Signed-off-by:
Marco Hartmann <marco.hartmann@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 27 Aug, 2019 11 commits
-
-
Cong Wang authored
The net pointer in struct xt_tgdtor_param is not explicitly initialized therefore is still NULL when dereferencing it. So we have to find a way to pass the correct net pointer to ipt_destroy_target(). The best way I find is just saving the net pointer inside the per netns struct tcf_idrinfo, which could make this patch smaller. Fixes: 0c66dc1e ("netfilter: conntrack: register hooks in netns when needed by ruleset") Reported-and-tested-by: itugrok@yahoo.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix a page lock leak in nfs_pageio_resend() - Ensure O_DIRECT reports an error if the bytes read/written is 0 - Don't handle errors if the bind/connect succeeded - Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidat ed" Bugfixes: - Don't refresh attributes with mounted-on-file information - Fix return values for nfs4_file_open() and nfs_finish_open() - Fix pnfs layoutstats reporting of I/O errors - Don't use soft RPC calls for pNFS/flexfiles I/O, and don't abort for soft I/O errors when the user specifies a hard mount. - Various fixes to the error handling in sunrpc - Don't report writepage()/writepages() errors twice" * tag 'nfs-for-5.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: remove set but not used variable 'mapping' NFSv2: Fix write regression NFSv2: Fix eof handling NFS: Fix writepage(s) error handling to not report errors twice NFS: Fix spurious EIO read errors pNFS/flexfiles: Don't time out requests on hard mounts SUNRPC: Handle connection breakages correctly in call_status() Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated" SUNRPC: Handle EADDRINUSE and ENOBUFS correctly pNFS/flexfiles: Turn off soft RPC calls SUNRPC: Don't handle errors if the bind/connect succeeded NFS: On fatal writeback errors, we need to call nfs_inode_remove_request() NFS: Fix initialisation of I/O result struct in nfs_pgio_rpcsetup NFS: Ensure O_DIRECT reports an error if the bytes read/written is 0 NFSv4/pnfs: Fix a page lock leak in nfs_pageio_resend() NFSv4: Fix return value in nfs_finish_open() NFSv4: Fix return values for nfs4_file_open() NFS: Don't refresh attributes with mounted-on-file information -
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC updates from Vineet Gupta: - support for Edge Triggered IRQs in ARC IDU intc - other fixes here and there * tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: prefer __section from compiler_attributes.h dt-bindings: IDU-intc: Add support for edge-triggered interrupts dt-bindings: IDU-intc: Clean up documentation ARCv2: IDU-intc: Add support for edge-triggered interrupts ARC: unwind: Mark expected switch fall-throughs ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations ARC: fix typo in setup_dma_ops log message ARCv2: entry: early return from exception need not clear U & DE bits
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD fix from Lee Jones: "Identify potentially unused functions in rk808 driver when !PM" * tag 'mfd-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: rk808: Make PM function declaration static mfd: rk808: Mark pm functions __maybe_unused
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes as usual: - More coverage of USB-audio descriptor sanity checks - A fix for mute LED regression on Conexant HD-audio codecs - A few device-specific fixes and quirks for USB-audio and HD-audio - A fix for (die-hard remaining) possible race in sequencer core - FireWire oxfw regression fix that was introduced in 5.3-rc1" * tag 'sound-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: oxfw: fix to handle correct stream for PCM playback ALSA: seq: Fix potential concurrent access to the deleted pool ALSA: usb-audio: Check mixer unit bitmap yet more strictly ALSA: line6: Fix memory leak at line6_init_pcm() error path ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate() ALSA: hda/ca0132 - Add new SBZ quirk ALSA: usb-audio: Add implicit fb quirk for Behringer UFX1604 ALSA: hda - Fixes inverted Conexant GPIO mic mute led
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Use 32-bit index for tails calls in s390 bpf JIT, from Ilya Leoshkevich. 2) Fix missed EPOLLOUT events in TCP, from Eric Dumazet. Same fix for SMC from Jason Baron. 3) ipv6_mc_may_pull() should return 0 for malformed packets, not -EINVAL. From Stefano Brivio. 4) Don't forget to unpin umem xdp pages in error path of xdp_umem_reg(). From Ivan Khoronzhuk. 5) Fix sta object leak in mac80211, from Johannes Berg. 6) Fix regression by not configuring PHYLINK on CPU port of bcm_sf2 switches. From Florian Fainelli. 7) Revert DMA sync removal from r8169 which was causing regressions on some MIPS Loongson platforms. From Heiner Kallweit. 8) Use after free in flow dissector, from Jakub Sitnicki. 9) Fix NULL derefs of net devices during ICMP processing across collect_md tunnels, from Hangbin Liu. 10) proto_register() memory leaks, from Zhang Lin. 11) Set NLM_F_MULTI flag in multipart netlink messages consistently, from John Fastabend. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) r8152: Set memory to all 0xFFs on failed reg reads openvswitch: Fix conntrack cache with timeout ipv4: mpls: fix mpls_xmit for iptunnel nexthop: Fix nexthop_num_path for blackhole nexthops net: rds: add service level support in rds-info net: route dump netlink NLM_F_MULTI flag missing s390/qeth: reject oversized SNMP requests sock: fix potential memory leak in proto_register() MAINTAINERS: Add phylink keyword to SFF/SFP/SFP+ MODULE SUPPORT xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md mode ipv4/icmp: fix rt dst dev null pointer dereference openvswitch: Fix log message in ovs conntrack bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0 bpf: fix use after free in prog symbol exposure bpf: fix precision tracking in presence of bpf2bpf calls flow_dissector: Fix potential use-after-free on BPF_PROG_DETACH Revert "r8169: remove not needed call to dma_sync_single_for_device" ipv6: propagate ipv6_add_dev's error returns out of ipv6_find_idev net/ncsi: Fix the payload copying for the request coming from Netlink qed: Add cleanup in qed_slowpath_start() ... -
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: fs/nfs/write.c: In function nfs_page_async_flush: fs/nfs/write.c:609:24: warning: variable mapping set but not used [-Wunused-but-set-variable] It is not use since commit aefb623c422e ("NFS: Fix writepage(s) error handling to not report errors twice") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com>
-
Trond Myklebust authored
Ensure we update the write result count on success, since the RPC call itself does not do so. Reported-by:
Jan Stancek <jstancek@redhat.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
-
Trond Myklebust authored
If we received a reply from the server with a zero length read and no error, then that implies we are at eof. Signed-off-by: -
Lee Jones authored
Avoids: ../drivers/mfd/rk808.c:771:1: warning: symbol 'rk8xx_pm_ops' \ was not declared. Should it be static? Fixes: 5752bc43 ("mfd: rk808: Mark pm functions __maybe_unused") Reviewed-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Arnd Bergmann authored
The newly added suspend/resume functions are only used if CONFIG_PM is enabled: drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function] drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so the compiler can silently drop them when they are not needed. Fixes: 586c1b41 ("mfd: rk808: Add RK817 and RK809 support") Signed-off-by:
-
- 26 Aug, 2019 6 commits
-
-
Trond Myklebust authored
If writepage()/writepages() saw an error, but handled it without reporting it, we should not be re-reporting that error on exit. Signed-off-by: -
Trond Myklebust authored
If the client attempts to read a page, but the read fails due to some spurious error (e.g. an ACCESS error or a timeout, ...) then we need to allow other processes to retry. Also try to report errors correctly when doing a synchronous readpage. Signed-off-by: -
Trond Myklebust authored
If the mount is hard, we should ignore the 'io_maxretrans' module parameter so that we always keep retrying. Signed-off-by: -
Trond Myklebust authored
If the connection breaks while we're waiting for a reply from the server, then we want to immediately try to reconnect. Fixes: ec6017d9 ("SUNRPC fix regression in umount of a secure mount") Signed-off-by:
-
Trond Myklebust authored
This reverts commit a79f194a. The mechanism for aborting I/O is racy, since we are not guaranteed that the request is asleep while we're changing both task->tk_status and task->tk_action. Signed-off-by:
-
Trond Myklebust authored
If a connect or bind attempt returns EADDRINUSE, that means we want to retry with a different port. It is not a fatal connection error. Similarly, ENOBUFS is not fatal, but just indicates a memory allocation issue. Retry after a short delay. Signed-off-by:
-
