disable + comment current secam tweak, will not work that way ...
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 o Remove old unused header files
 o Update the VINO video driver to something that's vaguely working
 o Bug fixes for the IP22 Zilog driver
 o Fix use of config.h
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The pseudo-unregistration of PCMCIA sockets in case the registration of any
such socket failed causes lockups.

See http://bugme.osdl.org/show_bug.cgi?id=4115 for details (same problem,
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix a bug which was diagnosed by David Howard <daveh@dmh2000.com>.

The pseudo-unregistration of PCMCIA sockets in case the registration of any
such socket failed causes lockups.

See http://bugme.osdl.org/show_bug.cgi?id=4115 for details
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

s390 should use the generic compat functions for compat_sys_old_readdir and
compat_sys_getdents.  The s390 specific ones are buggy and superflous.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

tst-timer4 from the glibc fails in the 32bit compat execution environment. 
This is due to a incomplete siginfo structure for POSIX.1b timers in
compat_signal.c.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Steffen Thoss <thoss@de.ibm.com>
From: Frank Pavlic <pavlic@de.ibm.com>

qeth network driver changes:
 - Improve performance by omitting svs.
 - Use function callback mechanism to set layer 2 parameters when getting
   a reply for a Layer 2 command.
 - dev->hard_header must not be NULL when fake_ll is no set since
   IPv6 and Layer2 needs the default function set by network stack.
 - ping6 works now when running in layer 2 mode.
 - Save original dev->hard_header to restore it when the user doesn't
   want to use fake_ll anymore.
 - Fake ethernet header in outgoing packets. This currently works
   only if qeth is compiled without ipv6 support.
 - Add more debug information in case of failures in qeth_set_offline.
 - Using fake_ll with HiperSockets devices results in misaligned
   ip packets and thus no traffic over HiperSockets.
 - Start qeth_remove_device only after the qeth recovery completed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add interface for key protected i/o.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Common i/o layer changes:
 - Allow ccw_device_halt() and ccw_device_clear() in state WAIT4IO.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

dasd driver change:
 - Set default i/o scheduler to 'deadline'. Latest performance
   results indicate that this works fastest.
 - Set default debug feature level to DBF_EMERG.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- Diagnose 8 needs a response buffer below 2GB real storage.
  As the caller cannot always allocate the buffer with GFP_DMA the best
  solution is to rewrite cpcmd to use a bounce buffer if necessary.
  The old function was renamed to __cpcmd and can be called if appropriate.
  The early boot code does not provide kmalloc but need cpcmd functionality.
  These places have been converted to use __cpcmd, as the init code and data
  are below 2GB.
- In case of an 31 bit system, cpcmd is defined as __cpcmd.
- EXPORT_SYMBOL(cpcmd) moved into cpcmd.c
- some whitespace fixes in cpcmd.[c/h]
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/s390/kernel/module.c vfree() checking cleanup.
Signed-off-by: James Lamanna <jlamanna@gmail.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Christian Bornträger <cborntra@de.ibm.com>
From: Heiko Carstens <heiko.carstens@de.ibm.com>
From: Michael Holzheu <holzheu@de.ibm.com>
From: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 core changes:
 - Export arch_pick_mmap_layout as GPL symbol for binfmt_elf32.
 - Remove unnecessary include from cmm.
 - Allow only root to read the debug feature logs.
 - Register all RAM resources, this fixes output of /proc/iomem.
 - Add read_can_lock and write_can_lock primitives.
 - Regenerate default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes 2 SMP deadlocks.  The first is that mv64x60_read() was
returning before the unlock.  The second was mv64x60_modify() locks the
spin lock and calls mv64x60_read() and mv64x60_write() which also lock the
same spin lock.
Signed-Off-By: Brian Waite <waite@skycomputers.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

include/asm-ppc/rwsem.h has '#ifdef RWSEM_DEBUG' but RWSEM_DEBUG is always
defined (as 0) in include/linux/rwsem.h.  The #ifdef's should be #if's. 
This also brings the ppc usage in line with the the other architectures.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adds support for the IBM/AMCC PPC440SP SoC.  Also adds support for the Luan
reference board that has a 440SP on it.
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes several issues with the PPC4xx DMA library as well as adding
support for bursting and some improvements to SG handling.
Signed-off-by: Colin Wernham <cwernham@airspan.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch changes SELinux to display any permission values that could not
be mapped to names as a hex value when generating an audit message.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch regenerates the SELinux module headers to define the execmod
permission for character device files in order to provide proper auditing
of such checks on /dev/zero.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Since acpi_cpufreq_resume and speedstep_resume appear to return 0 upon
success, it seems like the attached patch is what the desired behavior
would be.  Otherwise, cpufreq_resume() always prints an error and exits
early if using a cpufreq_driver that supports resume.
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The earlier patch forgot to add the Makefile change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

avma1_cs detect routine for AVM A1 based PCMCIA cards has its "outb"
parameters inverted - switch to "byteout" define to be conformant with the
rest of the driver, fixing the order.  

This was noticed on PPC, which triggers an MCE in case of invalid IO port
access, which is not the case on x86.
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

<linux/prio_tree.h> is unsafe for inclusion by userland apps, but it is in
the userland-exposed portion of <linux/fs.h>.  It's only needed in the
__KERNEL__ protected portion of the file, so move the #include down to
there.

lmbench-2.0.4 runs into this issue in 'flushdisk'.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Vladimir Saveliev <vs@namesys.com>, Jan Kara <jack@suse.cz>

Add missing SMP locking and one lock_buffer() to the reiserfs quota code.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix some bugs in device-mapper handling of 64-bit values, replacing
dm_div_up() and dm_round_up() inlines with macros and removing some
avoidable divisions of 64-bit numbers.

The mirror region size is the granularity used to manage and monitor the
data copying, typically 512KB, so 32 bits (of sectors) should be plenty to
hold this.

Taken together with the two earlier patches:
  "fix TB stripe data corruption" (a missing cast) and
  "stripe_width should be sector_t",
I've now had 3 independent reports that this fixes device-mapper
for devices with large stripes.

Still awaiting test results for dm-crypt and dm-raid1.
Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

stripe_width should be sector_t to support large devices.
Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix unbalanced QP reference count decrement (introduced with QP lock
optimization patch)
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a missing break statement between RC and UD cases in mthca_post_send().
 This fixes a possible oops for protocols that use the RC transport.
Signed-off-by: Libor Michalek <libor@topspin.com>
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- Fix it for older C compilers.

- Extern decls always, always, always go in header files, please.

Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Not that low-level code really tends to care, but since loff_t is
a signed 64-bit entity and size_t is unsigned (and potentially
64-bit), mixing the two isn't very well-defined.. 

The actual user copy will do them too, but only for the
range that ends up being actually copied. That hides
bugs when the range has been clamped by file size or other
issues.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

With Olaf Hering <olh@suse.de>.

Parameters were interchanged.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Prarit Bhargava <prarit@sgi.com>

I discovered an issue where a hwif_init() failure lead to /proc/ide files
being created for devices that failed probes.  This resulted in
oops/WARN_ON/BUG_ON executions through the kernel depending on what
actions were on going.

slightly changed by me (bart)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_hwgroup_t.polling field added.  0 in poll_timeout field
used to indicate inactive polling but because 0 is a valid
jiffy value, though slim, there's a chance that something
weird can happen.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_drive_t.sleeping field added.  0 in sleep field used to
indicate inactive sleeping but because 0 is a valid jiffy
value, though slim, there's a chance that something can go
weird.  And while at it, explicit jiffy comparisons are
converted to use time_before() macros.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>