Merge tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc

Pull "Rockchip dts32 updates for 4.15 part1" from Heiko Stübner:

One new board the Vyasa from Amarula Solutions using a rk3288
and core lvds node for the newly added driver+binding.
Also bindings + nodes for the Mali-Utgard GPUs found on some
Rockchip socs like rk3036 and rk3188. With the recently revived
Lima project they can even render a red triangle to a png file.

* tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Enable thermal on rk3288-vyasa board
  ARM: dts: rockchip: fix mali400 ppmmu interrupt names
  ARM: dts: rockchip: Enable mali GPU node on rk3288-vyasa
  ARM: dts: rockchip: enable gpu on rk3188-radxarock
  ARM: dts: rockchip: add gpu nodes on rk3066/rk3188
  ARM: dts: rockchip: add rk322x gpu node
  ARM: dts: rockchip: enable the gpu on rk3036-kylin boards
  ARM: dts: rockchip: add rk3036 gpu node
  dt-bindings: gpu: mali-utgard: add optional power-domain reference
  dt-bindings: gpu: mali-utgard: add optional supply regulator
  dt-bindings: gpu: mali-utgard: Add Rockchip Utgard Malis
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-vyasa
  ARM: dts: rockchip: Add rk3288 vyasa board
  dt-bindings: Add vendor prefix for Amarula Solutions
  ARM: dts: rockchip: add LVDS node for rk3288

Merge tag 'stm32-dt-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc

Pull "STM32 DT updates for v4.15, round 1" from Alexandre Torgue:

Highlights:
----------
 -Add I2C1 support on STM32F746 SoC
 -Enable I2C1 on STM32F746 eval board
 -Add Timers support on STM32F746 SoC
 -Add USB HS and FS supports on STM32F746 Soc
 -Enable USB HS on STM32F746 disco and eval boards
 -Enable USB FS en STM32F746 disco board
 -Add Vrefbuf to STM32H743 SoC
 -Add LPTIMERS support on STM32H743 SoC
 -Add DMAMUX support on STM32H743 SoC
 -Enable STM32H743 clock driver
 -Add MDMA support on STM32H743 SoC
 -Change pinctrl pinmux entries for all SoC.

* tag 'stm32-dt-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: Add MDMA support for STM32H743 SoC
  ARM: dts: stm32: Enable USB FS on stm32f746-disco
  ARM: dts: stm32: Add USB FS support for STM32F746 MCU
  ARM: dts: stm32: Enable USB HS on stm32f746-disco
  ARM: dts: stm32: Enable USB HS on stm32746g-eval
  ARM: dts: stm32: Add USB HS support for STM32F746 MCU
  ARM: dts: stm32: change pinctrl bindings definition
  ARM: dts: stm32: Enable STM32H743 clock driver
  ARM: dts: stm32: fix hse clock frequency on STM32H743 Eval board
  ARM: dts: stm32: add Timers driver for stm32f746 MCU
  ARM: dts: stm32: Add DMAMUX support for STM32H743 SoC
  ARM: dts: stm32: Add lptimer definitions to stm32h743
  ARM: dts: stm32: add vrefbuf to stm32h743
  ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F746 SoC

Merge tag 'qcom-dts-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm Device Tree Changes for v4.15" from Andy Gross:

* Add Support for MSM8974 based Fairphone 2 phone
* Add support for MSM8974 based Sony Xperia Z2 Tablet
* Add MSM8660 GSBI6/7 nodes
* Disable GSBI6 at APQ8064 platform level
* Fix phy cells on APQ8064

* tag 'qcom-dts-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: msm8974-FP2: Add USB node
  ARM: dts: msm8974-FP2: Add sdhci1 node
  ARM: dts: msm8974-FP2: Add regulator nodes for FP2
  ARM: dts: msm8974-FP2: Introduce gpio-keys nodes
  ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone
  ARM: dts: qcom: add MSM8660 GSBI6 and GSBI7
  ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet
  ARM: dts: qcom-apq8064: disable gsbi6 i2c by default at soc dtsi
  ARM: dts: qcom-apq8064: Fix dsi and hdmi phy cells

Merge tag 'qcom-arm64-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM64 Updates for v4.15" from Andy Gross:

* Add PCIE support to relevant MSM8996 based boards
* Add RPM clock controller node on MSM8996
* Add dload address on MSM8916 and MSM8996
* Add MBHC button support on APQ8016 SBC
* Add RTMFS specific compatible for rmtfs memory node
* Fixups for MSM8916 GPIO line names and MDP address length

* tag 'qcom-arm64-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: msm8916: Mark rmtfs node as qcom, rmtfs-mem compatible
  arm64: dts: msm8996: Add the rpm clock controller node
  arm64: dts: qcom: sbc: Name GPIO lines
  arm64: dts: qcom: msm8916: Shrink mdp address length for msm8916
  arm64: dts: apq8016-sbc: add mbhc buttons support
  arm64: dts: qcom: Specify dload address for msm8916 and msm8996
  arm64: dts: apq8096-db820c: never disable regulator on LS expansion
  arm64: dts: apq8096-db820c: Enable on board 3 pcie root complex
  arm64: dts: qcom: msm8996: add support to pcie

Pull "arm: Xilinx ZynqMP DT changes for v4.15" from Michal Simek:

- Change 24c08 compatible string

* tag 'zynq-dt-for-4.15' of https://github.com/Xilinx/linux-xlnx:
  ARM: dts: zynq: Add generic compatible string for I2C EEPROM

Merge tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski:

1. Add new board: Hardkernel Odroid HC1.
2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to
   possible overheat if first pair of A7+A15 cores is idle but rest of
   CPUs are busy.
3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs.
4. Add power button to Odroid XU3/4.
5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5.
6. Add suspend quirk to DWC3 USB controller to fix enumeration of
   SuperSpeed devices on Odroid XU4.
7. Add HDMI and MHL to Trats2.
8. Cleanups (redundant properties and nodes).

* tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  dt-bindings: samsung: Document binding for new Odroid HC1 board
  ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board
  ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board
  ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi
  ARM: dts: exynos: Add dwc3 SUSPHY quirk
  ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes
  ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes
  ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards
  ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi
  ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420
  ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards
  ARM: dts: exynos: Add power button for Odroid XU3/4
  ARM: dts: exynos: Remove the display-timing and delay from Rinato
  ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information
  ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information
  ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition

Merge tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "DaVinci DT updates for v4.15" from Sekhar Nori:

Add support for accessing DSP on DA850 SoC when using
device-tree.

* tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx-dt: Add OF_DEV_AUXDATA entry for DSP clock matching
  ARM: dts: da850-lcdk: Add and enable CMA reserved pool for DSP
  ARM: dts: da850: Add DSP node

ARM64: DT: Hisilicon SoC DT updates for 4.15

- Add CoreSight related nodes for hi6220
- Add GPIO line names for hikey960
- Rectify the GPIO line names of the Poplar board to keep consistency
- Add thermal sensor binding doc and dt nodes for hi3660

* tag 'hisi-arm64-dt-for-4.15' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Register Hi3660's thermal sensor
  dt-bindings: Document the hi3660 thermal sensor binding
  arm64: dts: hisilicon: Standardize Poplar GPIO line names
  arm64: dts: hikey960: Update HiKey960 with GPIO line names
  arm64: dts: hi6220: add coresight dt nodes

The Faraday TVE200 is present in the Gemini SoC, sometimes
under the name "TVC". Add it to the SoC DTSI file along with
its resources.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'juno-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/soc

Pull "ARMv8 Vexpress/Juno DT update for v4.15" from Sudeep Holla:

Just single update to enable PSCI support on Foundation models

* tag 'juno-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: foundation-v8: Enable PSCI mode

Merge tag 'aspeed-4.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/soc

Pull "ASPEED devicetree updates for 4.15" from Joel Stanley:

 - Cleanups of the ASPEED device trees
 - Enable the i2c bus on all platforms
 - Turn VUART on for BMC platforms
 - Bind watchdog two for compatilbiy with shipping u-boot

* tag 'aspeed-4.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed-romulus: Enable VUART
  ARM: dts: aspeed-palmetto: Enable VUART
  ARM: dts: aspeed: Enable watchdog two
  ARM: dts: aspeed: Remove undocumented wdt properties
  ARM: dts: aspeed: Clean up UART nodes
  ARM: dts: aspeed: Correctly order UART nodes
  ARM: dts: aspeed: Add aliases for UARTs
  ARM: dts: aspeed-ast2500: Add I2C devices
  ARM: dts: aspeed-palmetto: Add I2C devices
  ARM: dts: aspeed-romulus: Add I2C devices
  ARM: dts: aspeed: Add I2C buses
  ARM: dts: aspeed: Reorder ADC node
  ARM: dts: aspeed: Move pinctrl subnodes to improve readability

Merge tag 'socfpga_dts_for_v4.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/soc

Pull "SoCFPGA DTS updates for v4.15" from Dinh Nguyen:
- Stratix10 platform updates
  - Fix up gic register entry
  - Enable ethernet/SDMMC
  - Update reset manager properties

* tag 'socfpga_dts_for_v4.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: stratix10: add reset property for various peripherals
  arm64: dts: stratix10: add the 'altr,modrst-off' property
  arm64: dts: stratix10: include the reset manager bindings
  arm64: dts: stratix10: add ethernet/sdmmc support to the S10 devkit
  arm64: dts: stratix10: fix up the gic register for the Stratix10 platform

Merge tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman:

* r7s72100 (RZ/A1) Peach board
  - Add pin groups for SCIF2 serial debug interface and Ethernet
    This avoids relying on bootloader settings
  - Support control of LED1 using gpio-leds

* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
  - Add MSIOF[012] support and define aliases for spi[0123]

* r8a7743 (RZ/G1M) SoC
  - Add I2C and IIC core nodes

* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform
   - Enable SDHI1 SD controller supporting high-speed and SDR50 transfers
   - Add chosen node to allow correct selection of serial console
     and the kernel command line
   - Enable RTC support
   - Enable USB2.0 host support
     This includes enabling USB PHY and internal PCI

* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven and
  r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoMs
   - Enable Add SPI NOR support
     This devices is used to boot up the system to the SoM DT

* r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM
  - Enable SDHI0 SD controller supporting high-speed transfers

* r8a7745 (RZ/G1E) iW-RainboW-G22D development platform
  - Add pnctl support for scif4
    This avoids reling on boot loader settings
  - Add EtherAVB support

* r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoM
  - Add basic SoM support
  - Enable MMCIF eMMC support
  - Enable RTC support
  - Enable SDHI1 SD controller supporting high-speed transfers

* r8a779[0-4] R-Car Gen2 SoCs
  - Add reset control properties
    Geert Uytterhoeven says:

    This patch series describes the reset topology on all R-Car Gen2 Socs,
    like was done before for R-Car Gen3 and RZ/G1.

    Resets usually match the corresponding module clocks.  Exceptions are:
      - The audio module has resets for the Serial Sound Interfaces only,
      - The display module has only a single reset for all DU channels, but
	adding reset properties for the display is postponed upon request
	from Laurent.

   - Convert to new CPG/MSSR bindings
     Geert Uytterhoven says:

     Currently Renesas R-Car Gen2 SoCs use the common clk-rcar-gen2,
     clk-mstp, and clk-div6 drivers, which depend on most clocks being
     described in DT.  Especially the module (MSTP) clocks are cumbersome
     and error prone, due to 3 arrays (clocks, clock-indices, and
     clock-output-names) to be kept in sync. In addition, the clk-mstp
     driver cannot be extended easily to also support module resets, which
     are provided by the same hardware module.

     Hence when developing support for R-Car Gen3 SoCs, another approach
     was chosen, which led to the CPG/MSSR driver core, and SoC-specific
     subdrivers (initially for R-Car Gen3, but later also for RZ/G1).

     This series converts the various R-Car Gen2 DTSes to migrate to the
     new CPG/MSSR drivers that were added in v4.13-rc1.

* r8a779[0,1,3,4] R-Car Gen2 SoCs
  - Stop grouping clocks under a "clocks" subnode
    Geert Uytterhoeven says:

    The current practice is to not group clocks under a "clocks" subnode,
    but just put them together with the other on-SoC devices.

    Hence this patch series implements this for the various R-Car Gen2
    DTSes that still need this (r8a7792.dtsi is OK).

* r8a7794 (E2) Alt board
  - Correct inverted sense of SD wip pins

* tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (48 commits)
  ARM: dts: r8a7743: Add MSIOF[012] support
  ARM: dts: r8a7745: Add MSIOF[012] support
  ARM: dts: iwg22d: Enable SDHI0 controller
  ARM: dts: iwg22m: Add SPI NOR support
  ARM: dts: r8a7745: Add QSPI support
  ARM: dts: iwg20m: Add SPI NOR support
  ARM: dts: r8a7743: Add QSPI support
  ARM: dts: iwg22m: Enable SDHI1 controller
  ARM: dts: r8a7745: Add SDHI controllers
  ARM: dts: r8a7794: Add reset control properties
  ARM: dts: r8a7793: Add reset control properties
  ARM: dts: r8a7792: Add reset control properties
  ARM: dts: r8a7791: Add reset control properties
  ARM: dts: r8a7790: Add reset control properties
  ARM: dts: r8a7743: Add IIC cores to dtsi
  ARM: dts: alt: use correct logic for SD WP pins
  ARM: dts: iwg20d-q7: Enable USB PHY
  ARM: dts: iwg20d-q7: Enable internal PCI
  ARM: dts: r8a7743: Link PCI USB devices to USB PHY
  ARM: dts: r8a7743: Add USB PHY DT support
  ...

Merge tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC DT Bindings Updates for v4.15" from Simon Horman:

* Consistently do not use ';' in documentation of compat strings
  for boards. A misture of using and not using a trailing ';' had
  krept in over time with not using being dominant.

* Document bindings for
  - Eagle board and r8a77970 (V3M) SoC bindings.
    Eagle is a board for the V3M SoC
  - Document Kingfisher board bindings.
    Kingfisher is an extension board for the H3ULCB and M3ULCB boards.

* Add r8a77970 (V3M) SYSC power domain definitions

  Add macros usable by the device tree sources to reference r8a77970 SYSC
  power domains by index.

* Add Renesas SoC DT bindings doc to Renesas ARM section of MAINTAINERS file

* Drop bogus node name suffix from example of /renesas,dw-hdmi binding

* Document APMU and SMP enable method for r8a7745 (RZ/G1E) SoC

* tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: remove inconsistent ; from documentation
  arm64: renesas: document Eagle board bindings
  arm: shmobile: Document Kingfisher board DT bindings
  dt-bindings: power: add R8A77970 SYSC power domain definitions
  MAINTAINERS: Add Renesas SoC DT bindings doc to Renesas ARM sections
  ARM: shmobile: Document R-Car V3M SoC DT bindings
  dt-bindings: display: renesas: dw-hdmi: Drop bogus node name suffix
  dt-bindings: apmu: Document r8a7745 support

Merge tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman:

* r8a7795 (H3)
  - Use r8a7795-cpg-mssr and r8a7795-sysc bindings
    Hardcoded indicies are replaced with symbols now that they are available

  - Drop bogus HDMI node name suffixes
    Laurent Pinchart says: Node names should not use numerical suffixes if
    the nodes can be distinguished by unit-address

  - Update PFC node name to pin-controller
    Shimoda-san says the PFC node name is changed "from e6060000.pfc and
    pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000
    like other Renesas SoCs."

* r8a7795 (H3) ES1.0
  - Drop extra zero from XHCI unit address
    This corrects a typo were ee0400000 rather than ee040000 was used
    as the unit address.

* r8a7796 (M3-W)
  - Add FDP1 instance
    Laurent Pinchart says: The r8a7796 has a single FDP1 instance.

* r8a7795 (H3) and r8a7796 (M3-W) SoCs
  - Add USB3.0 peripheral device nodes
    Shimoda-san says that this is not enabled on the Salvator-X/XS boards
    for now as:
     + we need a special cable (USB type-A to A cross cable).
     + we can swap the role by renesas_usb3 driver even if we use a normal
	cable and after usb3.0 host is running, but I think it's a special
	use case.

* r8a7795 (H3) and r8a7796 (M3-W) ULCB boards
  - Enable display output
    Laurent Pinchart says: The DU is already wired up to the HDMI encoder,
    all we need to do is enable it.

* r8a77995 (D3) Draak board
  - Enable EthernetAVB and , USB2.0 Host and PHY

  - Add serial console pins.
    This is safe to do now that r8a77995 PFC driver support is present

* r8a77970 (V3M)
  - Add basic support for SoC and EtherAVB, [H]SCIF and SYS-DMAC nodes
    This is a step towards enabling EtherAVB and [H]SCIF with SYS-DMAC
    in the Eagle board support for which is under review

* tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
  arm64: dts: renesas: r8a7796: add USB3.0 peripheral device node
  arm64: dts: renesas: r8a7795: add USB3.0 peripheral device node
  arm64: dts: renesas: r8a77995: draak: enable EthernetAVB
  arm64: dts: renesas: r8a77995: draak: enable USB2.0 Host (EHCI/OHCI)
  arm64: dts: renesas: r8a77995: draak: enable USB2.0 PHY
  arm64: dts: renesas: r8a77995: add USB2.0 Host (EHCI/OHCI) device node
  arm64: dts: renesas: r8a77995: Add USB2.0 PHY device node
  arm64: dts: draak: Add serial console pins
  arm64: dts: renesas: r8a77970: add EtherAVB support
  arm64: dts: renesas: r8a77970: add [H]SCIF support
  arm64: dts: renesas: r8a77970: add SYS-DMAC support
  arm64: dts: renesas: initial R8A77970 SoC device tree
  arm64: dts: renesas: r8a77995: Add EthernetAVB device node
  arm64: dts: renesas: r8a77995: add GPIO device nodes
  arm64: dts: renesas: r8a77995: Use r8a7795-cpg-mssr binding definitions
  arm64: dts: renesas: r8a77995: Use r8a7795-sysc binding definitions
  arm64: renesas: Add Renesas R8A77970 Kconfig support
  arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes
  arm64: dts: renesas: ulcb: Enable display output
  arm64: dts: renesas: r8a77995: update PFC node name to pin-controller
  ...

Merge tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

Pull "DTS updates for the Integrator PCIv3 driver" from Linus Walleij:

These are the DTS file changes required to fix bugs and satisfy
requirements for the new PCIv3 driver in the PCI subsystem.
The binding changes have been merged to the PCI tree.

[arnd] Note: this is an incompatible DT binding change, so things
       will break during bisection or when using an old dtb file.
       Since integrator has no real users, we can make an exception
       for that.

* tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: Update Integrator/AP PCI v3 compatible
  ARM: dts: integratorap: Fix PCI windows
  ARM: dts: add the PCI clock to the device tree

Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*'
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using
the following command:

perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*'

Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some
occurrences of uppercase hex.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

"interrupt-parent" property is declared in root node, so it is global
to all nodes. This property is re-declared in few sub-nodes. To avoid
duplication this property is removed from following sub-nodes:
pmu, amba@0, amba@0/ethernet.
Signed-off-by: Surender Polsani <surenderp@techveda.org>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch adds MDMA support for STM32H743 SoC.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch enables USB FS on stm32f746-disco (Host mode) with 5V VBUS
enable.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds the USB pins and nodes for USB FS core on STM32F746 SoC.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch enables USB HS on stm32f746-disco (Host mode).
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch enables USB HS on stm32746g-eval (Host mode).
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds the USB pins and nodes for USB HS core on STM32F746 SoC.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Initially each pin was declared in "include/dt-bindings/stm32<SOC>-pinfunc.h"
and each definition contained SOC names (ex: STM32F429_PA9_FUNC_USART1_TX).
Since this approach was approved, the number of supported MCU has
increased (STM32F429/STM32F469/STM32f746/STM32H743). To avoid to add a new
file in "include/dt-bindings" each time a new STM32 SOC arrives I propose
a new approach which consist to use a macro to define pin muxing in device
tree. All STM32 will use the common macro to define pinmux. Furthermore, it
will make STM32 maintenance and integration of new SOC easier .
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Vikas MANOCHA <vikas.manocha@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>

This patch enables clock driver for STM32H743 soc.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Fix HSE frequency to 25Mhz for STM32H743 Eval Board
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add Timers and it sub-nodes into DT for stm32f746 family.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds DMAMUX support for STM32H743 SoC.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add lptimer definitions, depending on features they provide:
- lptimer1 & 2 can act as PWM, trigger and encoder/counter
- lptimer3 can act as PWM and trigger
- lptimer4 & 5 can act as PWM
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add STM32H743 VREFBUF (Voltage Reference Buffer) definition.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds I2C1 support for STM32F746 eval board
Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Document the binding for new Hardkernel Odroid HC1 board.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>

Enable thermal on rk3288-vyasa board, TSHUT is high active.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Now that we have a binding defined for the shared file system memory use
this to describe the rmtfs memory region.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Add the rpm clock controller node for msm8996 devices

Cc: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This names the GPIO lines on the APQ8016 "SBC" also known
as the DragonBoard 410c, according to the schematic. This
is necessary for a conforming userspace looking across
all GPIO chips for the GPIO lines named "GPIO-A" thru
"GPIO-L".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This shrinks the address size down to 89000 from its previous 90000
which was mistakenly pulled from downstream.
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch adds voltage thresholds configuration required for getting
audio headsets button support.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>