- 16 Jun, 2009 40 commits
-
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Steven Toth authored
The patch means the board will be recognised, and the parts brought out of reset correctly. This patches depends on the centralized GPIO patch to be merged. What's missing before the HVR-1270 will function for DTV? The model# needs to be added to avoid 'unknown model' output and the LG3305/Tuner need to be attached in cx23885-dvb.c Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Steven Toth authored
The GPIO's on the product can be in one of three places. To date we've mainly used the GPIO's on the bridge itself, and once on the encoder. Rather than having the complexity of multiple GPIO writes/reads from isolated placed in the driver we'll route them through this function, so we can make intelligent decisions about 1) Where the GPIO lives and 2) Whether it conflicts (based on board) with some other function to avoid bugs. Signed-off-by:
-
Oliver Endriss authored
Some whitespace adjustments. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
av7110_av_start_play() should return 0 on success. Signed-off-by:
-
Oliver Endriss authored
Fixed VIDEO_SLOWMOTION ioctl. Signed-off-by:
-
Oliver Endriss authored
Discard PES packet if transport error indicator flag is set. Signed-off-by:
-
Oliver Endriss authored
Implemented TS replay capability. audio/video devices are able to process PES and TS data now. Signed-off-by:
-
Randy Dunlap authored
Build fails when CONFIG_I2C=n, so handle that case in the if block: drivers/built-in.o: In function `v4l2_device_unregister': (.text+0x157821): undefined reference to `i2c_unregister_device' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Steven Toth authored
... else DVB-T tuning will not work. Signed-off-by:
Steven Toth <stoth@linuxtv.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Steven Toth authored
Currently, DVB-T is broken and this fixes it. The PVRUSB2 has an odd I2C bus configuration where opening the i2c gate on the digital and analog demod causes the tuner to fail. This needs to be protected against for the PVRUSB2. Signed-off-by:
-
Hans Verkuil authored
g_tuner handled capability, audmode and rxsubchans incorrectly. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Remove bogus flags field Signed-off-by:
-
Randy Dunlap authored
soc_camera uses i2c_*() functions and has build errors when CONFIG_I2C=n: ERROR: "i2c_new_device" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_get_adapter" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_put_adapter" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_unregister_device" [drivers/media/video/soc_camera.ko] undefined! Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Andy Walls authored
The TCL MNM05-04 is used on some HVR-1600 models. It appears to be similar to the TCL MFMN05-4 but without FM radio. The TUNER_PHILIPS_FM1236_MK3 tuner definition appears to be the proper existing tuner definition to use for this tuner. Reported-by:
Matt Beadon <matt.beadon@gmail.com> Tested-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Jean Delvare authored
The i2c core used to maintain a list of client for each adapter. This is a duplication of what the driver core already does, so this list will be removed as part of a future cleanup. Anyone using this list must stop doing so. For pvrusb2, I propose the following change, which should lead to an equally informative output. The only difference is that i2c clients which are not a v4l2 subdev won't show up, but I guess this case is not supposed to happen anyway. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Mike Isely authored
Kick up the pvrusb2 version number advertised through the v4l interface. This value really has almost no meaning because I don't make a serious attempt to version the driver in this manner (otherwise this one line becomes a nasty hotspot of changes and merge conflicts). The value that is here is really a historical thing. However Hans Verkuil thought it might be a good idea to bump up the number anyway right now since the driver's mechanism for communicating with the v4l core has pretty much completely changed. Sending out a Signed-off-by: -
Mike Isely authored
This sets the disable_autoload_ir_video module option to being set, which disables any attempt by the driver to autoload IR support. This changes preserves previous behavior, for now. This change can be set back concurrent with other changes that finally update i2c-kbd-i2c to use the new i2c binding model. Signed-off-by:
-
Mike Isely authored
The ir-kbd-i2c module is about to be updated to match the new style i2c binding model. These pvrusb2 changes maintain compatibility with that change. Note that this does not actually break anything even without the expected ir-kbd-i2c changes yet because previously the pvrusb2 didn't autoload ir-kbd-i2c anyway. Signed-off-by:
-
Mike Isely authored
This change defines all possible "IR schemes" related to the pvrusb2 driver, on a per-device basis. That information is then set according to the hardware in use. The idea here is to make possible a more intelligent future decision on which, if any, IR receiver driver might be loaded during initialization. Signed-off-by:
-
Chaithrika U S authored
Add ADV7343 I2C based video encoder driver. This follows the v4l2-subdev framework. This driver has been tested on TI DM646x EVM. It has been tested for Composite and Component outputs. Updates as per review by Mauro Chehab, added support for more standards supported by the encoder. Also adding the missed out signed-offs.Tested only NTSC and PAL standards. [hverkuil@xs4all.nl: s_routing API changed, updated driver to use new API] Signed-off-by:
Manjunath Hadli <mrh@ti.com> Signed-off-by:
Brijesh Jadav <brijesh.j@ti.com> Signed-off-by:
Chaithrika U S <chaithrika@ti.com> Signed-off-by:
-
Chaithrika U S authored
This patch adds driver for TI THS7303 video amplifier. This driver is implemented as a v4l2 sub device. Tested on TI DM646x EVM. This version has updates based on review comments by Mauro Chehab. Signed-off-by:
-
Roel Kluin authored
Fix &&/|| typo. `default_norm' can be 0 (PAL), 1 (NTSC) or 2 (SECAM), the condition tested was impossible. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Roel Kluin authored
Remove redundant tests on unsigned. Signed-off-by:
-
Greg Kroah-Hartman authored
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Jean Delvare authored
The new i2c binding model doesn't use i2c_probe. Signed-off-by:
-
Németh Márton authored
The V4L2 ioctls usually return 0 when the operation was successful and -1 in case of error. Currently VIDIOC_REQBUFS returns the number of buffers which is redundant because this information is available in count field of struct v4l2_requestbuffers. The V4L2 API specification, revision 0.24 [1] explicitly specifies for VIDIOC_REQBUFS that the return value shall be 0 on success. The patch was tested with v4l-test 0.13 [2] with vivi driver. References: [1] V4L2 API specification, revision 0.24 http://v4l2spec.bytesex.org/spec/r13696.htm [2] v4l-test: Test environment for Video For Linux Two API http://v4l-test.sourceforge.net/Signed-off-by:Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Pieter Van Schaik authored
Adds support to the remote control of the Winfast TV2000 XP Global TV capture card. A case statement was added in order to initialize the GPIO data structures as well as a case statement for handling the keys correctly when pressed. Thanks to Hermann and Mauro for all the help Signed-off-by:
Pieter C van Schaik <vansterpc@gmail.com> Signed-off-by:
-
Dmitri Belimov authored
When we capture signal from composite input offen lost and found syncro sequence. In this case the MPEG coder hardware reset after each lost/found event. The image has a lot of artefactes. This patch remove hardware reset of MPEG encoder. This is patch from our customer. I checked this. With my best regards, Dmitry. Signed-off-by:
Alexey Osipov <lion-simba@pridelands.ru> Signed-off-by:
-
Dmitri Belimov authored
If video has a lot of changes in frame, MPEG encoder need more time for coding process. Add new bigger timeout for encoder. This is patch from our customer. I checked this. Signed-off-by:
-
hermann pitton authored
The Compro VideoMate T750 has no support for IR and DVB-T yet. Disable both to avoid fall through and confusing printouts. Signed-off-by:
Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
-
Magnus Damm authored
Remove the videobuf-dma-contig sync operation. Sync is only needed for noncoherent buffers, and since videobuf-dma-contig is built on coherent memory allocators the memory is by definition always in sync. Reported-by:
Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by:
Magnus Damm <damm@igel.co.jp> Reviewed-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Wen-chien Jesse Sung authored
Add USB ID (1b80:c810) for Kworld MC810. Signed-off-by:
Wen-chien Jesse Sung <jesse@cola.voip.idv.tw> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
-
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
