After the transition from no media to media FW will clear the
set-phy-cfg data set by the user. Save initial PHY settings and any
settings later requested by the user and use that data to restore PHY
settings on media insertion. Since PHY configuration is now being stored,
replace calls that were calling FW to get the configuration with the saved
copy.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The call to ice_cfg_phy_fec() requires the caller to perform certain
actions before calling it. Instead of imposing these preconditions move
the operations into the function and perform them ourselves.

Also, fix some style issues in nearby touched code.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Create a helper function for configuring requested flow control so that it
can be utilized by other functions looking to configure flow control
settings. Utilize the existing helper ice_copy_phy_caps_to_cfg() to copy a
PHY capability to configuration instead duplicating the code for it.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add callbacks needed to support advanced power management for Wake on LAN.
Also make ice_pf_state_is_nominal function available for all configurations
not just CONFIG_PCI_IOV.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Using the new ice_aq_list_caps and ice_parse_(dev|func)_caps functions,
replace ice_discover_caps with two functions that each take a pointer to
the dev_caps and func_caps structures respectively.

This makes the side effect of updating the hw->dev_caps and
hw->func_caps obvious from reading the implementation of the function.
Additionally, it opens the way for enabling reading of device
capabilities outside of the initialization flow. By passing in
a pointer, another caller will be able to read the capabilities without
modifying the HW capabilities structures.

As there are no other callers, it is safe to now remove
ice_aq_discover_caps and ice_parse_caps.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_parse_caps function is used to convert the capability block data
coming from firmware into a structured format used by other parts of the
code.

The current implementation directly updates the hw->func_caps and
hw->dev_caps structures. It is directly called from within
ice_aq_discover_caps. This causes the discover_caps function to have the
side effect of modifying the HW capability structures, which is not
intuitive.

Split this function into ice_parse_dev_caps and ice_parse_func_caps.
These functions will take a pointer to the dev_caps and func_caps
respectively. Also create an ice_parse_common_caps for sharing the
capability logic that is common to device and function.

Doing so enables a future refactor to allow reading and parsing
capabilities into a local caps structure instead of modifying the
members of the HW structure directly.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_discover_caps function is used to read the device and function
capabilities, updating the hardware capabilities structures with
relevant data.

The exact number of capabilities returned by the hardware is unknown
ahead of time. The AdminQ command will report the total number of
capabilities in the return buffer.

The current implementation involves requesting capabilities once,
reading this returned size, and then re-requested with that size.

This isn't really necessary. The firmware interface has a maximum size
of ICE_AQ_MAX_BUF_LEN. Firmware can never return more than
ICE_AQ_MAX_BUF_LEN / sizeof(struct ice_aqc_list_caps_elem) capabilities.

Avoid the retry loop by simply allocating a buffer of size
ICE_AQ_MAX_BUF_LEN. This is significantly simpler than retrying. The
extra allocation isn't a big deal, as it will be released after we
finish parsing the capabilities.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Tom Parkin says:

====================
l2tp: further checkpatch.pl cleanups

l2tp hasn't been kept up to date with the static analysis checks offered
by checkpatch.pl.

This patchset builds on the series "l2tp: cleanup checkpatch.pl
warnings".  It includes small refactoring changes which improve code
quality and resolve a subset of the checkpatch warnings for the l2tp
codebase.
====================
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Passing "sizeof(struct blah)" in kzalloc calls is less readable,
potentially prone to future bugs if the type of the pointer is changed,
and triggers checkpatch warnings.

Tweak the kzalloc calls in l2tp which use this form to avoid the
warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating an L2TP tunnel using the netlink API, userspace must
either pass a socket FD for the tunnel to use (for managed tunnels),
or specify the tunnel source/destination address (for unmanaged
tunnels).

Since source/destination addresses may be AF_INET or AF_INET6, the l2tp
netlink code has conditionally compiled blocks to support IPv6.

Rather than embedding these directly into l2tp_nl_cmd_tunnel_create
(where it makes the code difficult to read and confuses checkpatch to
boot) split the handling of address-related attributes into a separate
function.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_nl_tunnel_send has conditionally compiled code to support AF_INET6,
which makes the code difficult to follow and triggers checkpatch
warnings.

Split the code out into functions to handle the AF_INET v.s. AF_INET6
cases, which both improves readability and resolves the checkpatch
warnings.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

checkpatch warns about indentation and brace balancing around the
conditionally compiled code for AF_INET6 support in
l2tp_dfs_seq_tunnel_show.

By adding another check on the socket address type we can make the code
more readable while removing the checkpatch warning.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These checks are all simple and don't benefit from extra braces to
clarify intent.  Remove them for easier-reading code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

checkpatch warns about comparisons to NULL, e.g.

        CHECK: Comparison to NULL could be written "!rt"
        #474: FILE: net/l2tp/l2tp_ip.c:474:
        +       if (rt == NULL) {

These sort of comparisons are generally clearer and more readable
the way checkpatch suggests, so update l2tp accordingly.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use eth_zero_addr() to clear mac address insetad of memset().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use eth_zero_addr() to clear mac address insetad of memset().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
mptcp: non backup subflows pre-reqs

This series contains a bunch of MPTCP improvements loosely related to
concurrent subflows xmit usage, currently under development.

The first 3 patches are actually bugfixes for issues that will become apparent
as soon as we will enable the above feature.

The later patches improve the handling of incoming additional subflows,
improving significantly the performances in stress tests based on a high new
connection rate.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

So that we can easily perform some basic PM-related
adimission checks before creating the child socket.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_send_active_reset() is more prone to transient errors
(memory allocation or xmit queue full): in stress conditions
the kernel may drop the egress packet, and the client will be
stuck.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When syncookie are in use, the TCP stack may feed into
subflow_syn_recv_sock() plain TCP request sockets. We can't
access mptcp_subflow_request_sock-specific fields on such
sockets. Explicitly check the rsk ops to do safe accesses.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mentioned function has several unneeded branches,
handle each case - MP_CAPABLE, MP_JOIN, fallback -
under a single conditional and drop quite a bit of
duplicate code.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently accepted msk sockets become established only after
accept() returns the new sk to user-space.

As MP_JOIN request are refused as per RFC spec on non fully
established socket, the above causes mp_join self-tests
instabilities.

This change lets the msk entering the established status
as soon as it receives the 3rd ack and propagates the first
subflow fully established status on the msk socket.

Finally we can change the subflow acceptance condition to
take in account both the sock state and the msk fully
established flag.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the unlikely event of a failure at connect time,
we currently clear the request_mptcp flag - so that
the MPC handshake is not started at all, but the msk
is not explicitly marked as fallback.

This would lead to later insertion of wrong DSS options
in the xmitted packets, in violation of RFC specs and
possibly fooling the peer.

Fixes: e1ff9e82 ("net: mptcp: improve fallback to TCP")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When updating a partially acked data fragment, we
actually corrupt it. This is irrelevant till we send
data on a single subflow, as retransmitted data, if
any are discarded by the peer as duplicate, but it
will cause data corruption as soon as we will start
creating non backup subflows.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we do not init the subflow write sequence for
MP_JOIN subflows. This will cause bad mapping being
generated as soon as we will use non backup subflow.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED, before setting
the info, which will hopefully protect us from -EPERM errors
the previous code was gracefully ignoring. Ed reports this
is not the 100% correct bit, but it's the best approximation
we have. Shared code reports the port information back to user
space, so we really want to know what was added and what failed.
Ignoring -EPERM is not an option.

The driver does not call udp_tunnel_get_rx_info(), so its own
management of table state is not really all that problematic,
we can leave it be. This allows the driver to continue with its
copious table syncing, and matching the ports to TX frames,
which it will reportedly do one day.

Leave the feature checking in the callbacks, as the device may
remove the capabilities on reset.

Inline the loop from __efx_ef10_udp_tnl_lookup_port() into
efx_ef10_udp_tnl_has_port(), since it's the only caller now.

With new infra this driver gains port replace - when space frees
up in a full table a new port will be selected for offload.
Plus efx will no longer sleep in an atomic context.

v2:
 - amend the commit message about TRUSTED not being 100%
 - add TUNNEL_ENCAP_UDP_PORT_ENTRY_INVALID to mark unsed
   entries
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-By: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Lobakin says:

====================
qed, qede: improve chain API and add XDP_REDIRECT support

This series adds missing XDP_REDIRECT case handling in QLogic Everest
Ethernet driver with all necessary prerequisites and ops.
QEDE Tx relies heavily on chain API, so make sure it is in its best
at first.

v2 (from [1]):
 - add missing includes to #003 to pass the build on Alpha;
 - no functional changes.

[1] https://lore.kernel.org/netdev/20200722155349.747-1-alobakin@marvell.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add XDP_REDIRECT case handling and the corresponding NDO to support
redirecting XDP frames. This also includes registering driver memory
model (currently order-0 page mode) in BPF subsystem.
The total number of XDP queues is usually 1:1 with Rx ones.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current XDP Tx logic is suboptimal and can't be reused for XDP_REDIRECT
path.
Make qede_xdp_{tx_int,xmit}() more universal and effective in general to
allow future expanding.

Misc: use unlikely() hints where appropriate and replace "fallthrough"
comments with pseudo-keywords.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct the indentation of net_device_ops declarations for fancier look.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the file more readable and easier for adding new fields.

Misc: use IFNAMSIZ and netdev_name() instead of sizeof_field()
and direct net_device::name dereferencing.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add reverse-variants of qed_chain_get_elem_left{,u32}() to be able to
know current chain occupation. They will be used in the upcoming qede
XDP_REDIRECT code.
They share most of the logics with the mentioned ones, so were reused
to collapse the latters.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Constify chain pointers and refactor qed_chain_get_elem_left{,u32}() a bit.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend current infrastructure to store chain page size in a struct
and use it in all functions instead of fixed QED_CHAIN_PAGE_SIZE.
Its value remains the default one, but can be overridden in
qed_chain_init_params before chain allocation.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To simplify qed_chain_alloc() prototype and call sites, introduce struct
qed_chain_init_params to specify chain params, and pass a pointer to
filled struct to the actual qed_chain_alloc() instead of a long list
of separate arguments.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fill PBL table parameters for chains with an external PBL data earlier on
qed_chain_init_params() rather than on allocation itself. This simplifies
allocation code and allows to extend struct ext_pbl for other chain types.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed_chain_init*() are used in one file/place on "cold" path only, so they
can be uninlined and moved next to the call sites.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PBL chain elements are actually DMA addresses stored in __le64, but
currently their size is hardcoded to 8, and DMA addresses are assigned
via cast to variable-sized dma_addr_t without any bitwise conversions.
Change the type of pbl_virt array to match the actual one, add a new
field to store the size of allocated DMA memory and sanitize elements
assignment.

Misc: give more logic names to the members of qed_chain::pbl_sp embedded
struct.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zero-initialize chain on qed_chain_free(), so it couldn't be freed
twice and provoke undefined behaviour.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move chain allocation/freeing functions to a new file to not mix it with
hardware-related code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>