- 21 Oct, 2010 40 commits
-
-
Michael Krufky authored
Add support for various Hauppauge EXETER designs. Note by DJH: fixed a few minor 'make checkpatch' warnings before commit. Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
Devin Heitmueller <dheitmueller@hauppauge.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Palash Bandyopadhyay authored
Added support for new cx231xx boards - Carraera, Shelby, RDx_253S and VIDEO_GRABBER. [mchehab@redhat.com: Fix a merge conflict with BKL removal patches] Signed-off-by:
Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by:
-
Palash Bandyopadhyay authored
Introduce a new driver for the s5h1432 Signed-off-by:
-
Ruslan Pisarev authored
Errors found by the checkpatch.pl tool. [mchehab@redhat.com: merged a series of CodingStyle cleanup patches for cx25851. They're all from the same author, and patches the same driver] Signed-off-by:
Ruslan Pisarev <ruslan@rpisarev.org.ua> Cc: Palash Bandyopadhyay <Palash.Bandyopadhyay@conexant.com> Signed-off-by:
-
Ruslan Pisarev authored
fix "ERROR: space prohibited after that open parenthesis '('" This is a patch to the cx25821-audio-upstream.h file that fixed up a space errors found by the checkpatch.pl tools. Signed-off-by: -
Daniel Drake authored
This allows GStreamer to pick appropriate framerates and resolutions based on desired capture parameters. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Daniel Drake authored
GStreamer uses this. Signed-off-by:
-
Jonathan Corbet authored
Inquiring minds (and gstreamer) want to know. Signed-off-by:
-
Daniel Drake authored
This patch, which basically reverts 6d77444a, fixes an occasional on-boot or on-capture hang on the XO-1 laptop. It seems like the cafe hardware is flakier than we thought and that in some cases, the commands get executed but are never reported as completed (even if we substantially increase the delays before reading registers). Reintroduce the 1-second CAFE_SMBUS_TIMEOUT to catch and avoid this strange hardware bug. Signed-off-by:
-
Pete Eberlein authored
The go7007 driver has a potential buffer overflow and pointer corruption bug which causes a crash while capturing MJPEG. The motion detection (MODET) active_map array can be overflowed by JPEG frame data that emulates a MODET start code. The active_map overflow overwrites the active_buf pointer, causing a crash. The JPEG data that emulated MODET start code was being removed from the output, resulting in garbled JPEG frames. Therefore ignore MODET start codes when MODET is not enabled. Signed-off-by:
Pete Eberlein <pete@sensoray.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
I added a code to the driver to force it to produce a warning. This were intended to remind me about a very bad hack. I never found a way to workaround. So, instead of those warnings: drivers/staging/tm6000/tm6000-core.c: In function ‘tm6000_init_analog_mode’: drivers/staging/tm6000/tm6000-core.c:328: warning: ISO C90 forbids mixed declarations and code Let's document the issue and hope if someone with the support of the vendor might fix it. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/staging/lirc/lirc_igorplugusb.c: In function ‘usb_remote_probe’: drivers/staging/lirc/lirc_igorplugusb.c:393: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ Signed-off-by: -
Mauro Carvalho Chehab authored
As pointed by Laurent: I think min_t(size_t, PAGE_SIZE, size) is the preferred way. Thanks-to: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: -
Geert Uytterhoeven authored
struct file_operations was made const in the drivers, but not in struct lirc_driver: drivers/staging/lirc/lirc_it87.c:365: warning: initialization discards qualifiers from pointer target type drivers/staging/lirc/lirc_parallel.c:571: warning: initialization discards qualifiers from pointer target type drivers/staging/lirc/lirc_serial.c:1073: warning: initialization discards qualifiers from pointer target type drivers/staging/lirc/lirc_sir.c:482: warning: initialization discards qualifiers from pointer target type drivers/staging/lirc/lirc_zilog.c:1284: warning: assignment discards qualifiers from pointer target type Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/staging/tm6000/tm6000-stds.c:101: warning: excess elements in array initializer drivers/staging/tm6000/tm6000-stds.c:101: warning: (near initialization for ‘tv_stds[0].common’) drivers/staging/tm6000/tm6000-stds.c:160: warning: excess elements in array initializer drivers/staging/tm6000/tm6000-stds.c:160: warning: (near initialization for ‘tv_stds[1].common’) drivers/staging/tm6000/tm6000-stds.c:219: warning: excess elements in array initializer drivers/staging/tm6000/tm6000-stds.c:219: warning: (near initialization for ‘tv_stds[2].common’) drivers/staging/tm6000/tm6000-stds.c:336: warning: excess elements in array initializer drivers/staging/tm6000/tm6000-stds.c:336: warning: (near initialization for ‘tv_stds[4].common’) Signed-off-by: -
Mauro Carvalho Chehab authored
There are some symbols at saa7134-input that are used on saa7134 and vice-versa. Due to that, module install fails. So, partially revert commit 9f495cf7d691c99bf7bdcec9f35fcfdad2cf9ae9. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/videobuf-dma-sg.c: In function ‘videobuf_pages_to_sg’: drivers/media/video/videobuf-dma-sg.c:119: warning: comparison of distinct pointer types lacks a cast drivers/media/video/videobuf-dma-sg.c:120: warning: comparison of distinct pointer types lacks a cast Signed-off-by: -
Jean-François Moine authored
The driver sn9c102 does not know about the sensor mi0360b. Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Jean-François Moine authored
The 'end of image' block may be splitted between two ISOC packets. This case was not tested, so, some images could be lost and concatenated to previous one(s), raising 'frame overflow' errors. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jarkko Nikula authored
Call to i2c_put_adapter was missing in radio_si4713_pdriver_probe and radio_si4713_pdriver_remove. Signed-off-by:
Jarkko Nikula <jhnikula@gmail.com> Acked-by:
Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by:
-
Dmitri Belimov authored
I rework my last patch for audio and now audio works well. This patch can be submited to GIT tree Quality of audio now is good for SECAM-DK. For other standard I set some value from datasheet need some tests. 1. Fix pcm buffer overflow 2. Rework pcm buffer fill method 3. Swap bytes in audio stream 4. Change some registers value for TM6010 5. Change pcm buffer size Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Matthew Garrett authored
We've been doing this for a while in Fedora without any complaints. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of doing: [ 82.581639] tda18271 4-0060: creating new instance [ 82.588411] Unknown device detected @ 4-0060, device not supported. [ 82.594695] tda18271_attach: [4-0060|M] error -22 on line 1272 [ 82.600530] tda18271 4-0060: destroying instance Print: [ 468.740392] Unknown device (0) detected @ 4-0060, device not supported. for the error message, to help detecting what's going wrong with the device. This helps to detect when the driver is using the wrong I2C bus (or have the i2g gate switch pointing to the wrong place), on devices like cx231xx that just return 0 on reads to a non-existent i2c device. Reviewed-by:
-
Hans Verkuil authored
This function is an internal API and belongs in v4l2-common.h, not videodev.h. The return pointer and probe argument should be const as well. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Missed a few init functions on non-Intel platforms the first time :-( Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
With a null request byte, these commands prevented the next commands to be executed. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Guennadi Liakhovetski authored
Multiple user-space application instances can open the same video device, but it only makes sense for one of them to manage the videobuffer queue and set video format of the device. Restrict soc-camera respectively. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
Many video drivers implement a fixed set of frame formats and thus face a task of finding the best match for a user-requested format. Implementing this in a generic function has also an advantage, that different drivers with similar supported format sets will select the same format for the user, which improves consistency across drivers. Signed-off-by:
-
Michael Grzeschik authored
Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
Baruch Siach authored
This allows userspace to terminate a capture without waiting for the current frame to complete. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Baruch Siach authored
Signed-off-by:
-
Michael Grzeschik authored
In the current source status the emma has no limitation for any PIXFMT since the data is parsed raw and unprocessed into the memory. Signed-off-by:
-
