Introduce big-endian property to specify mtd radio partition endianness
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76x0e users reported some devices (e.g TP-Link Archer VR200v) have
been flashed with big endian radio partition. Add the possibility to
specify eeprom endianness using big-endian dts property and in case
covert eeprom data in little endian
Tested-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reset MT_MIB_STAT_CCA after channel switch since it is used to track busy
time starting from 'commit dcff8d4d ("mt76: mt7603: switch to a
different counter for survey busy time")'
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Make sure the MAC address is checked before function returns.

If CONFIG_OF is set and the device node is null, the function will
return directly, and an invalid MAC address will not be checked.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes potential RCU issues and avoids calling ieee80211_rx_napi with softirq
enabled.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

To avoid having the hardware potentially write to memory behind stale
descriptors, set the dma-done flag on all of them before cleaning up
allocated rx buffers
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The MT7615 firmware needs to know the association id at creation time,
which is unavailable during the transition from notexist to none in
.sta_state.
This can cause a number of issues, probably also breaking powersave
support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Loading the mcu firmware and waiting for it to boot takes a long time,
which adds a significant amount to the system boot time.
Fix this by running the mcu init from a workqueue and waiting for it to
complete before starting the phy or issuing mcu commands via debugfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Beacon changes need to be sent to the firmware, otherwise it will
keep sending stale data
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is only used for testing for now. In the future it will be possible to
enable the second PHY through an proper API via device tree

Running:
 echo 1 > /sys/kernel/debug/ieee80211/phyX/mt76/dbdc

will register a second wiphy (and limit the primary one to 2 spatial streams).
The second wiphy will only be able to run on 5 GHz, while the primary one can
operate in both bands (if supported by the device).
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Beacons and management frames need to explicitly select the alternate tx
queues in order to be sent out on the right phy
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Run initialization per phy
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Use the first two WMM slots for the primary phy and the second two for the
secondary phy.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Program the RMAC CHFREQ registers to properly indicate the band that the
frames are received on.
Add some sanity checks to the programmed values, because the firmware
programs these registers differently
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move chainmask to struct mt7615_phy and instead of needlessly making the
format similar to values for older chips, make it refer to the actual chain
bits used for the rx/tx path.
This is important for multiple wiphy support, where for a secondary phy,
antenna_mask will start at 0, and chainmask will start at the chain offset
(bit 2)
Signed-off-by: Felix Fietkau <nbd@nbd.name>

There are two DFS detectors on the chip. When using 160 MHz channel bandwidth
(not supported in dual-wiphy mode), both are used. Otherwise, one detector is
used per wiphy.
Rework the code to start/stop them separately per phy and to indicate the
radar event on the right phy based on the detector index
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Writing 0/1 is shorter and just as clear
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Initialize low-power beacon mode setting
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Use per-phy radio stats and tuning registers
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Allows them to be used by a separately registered wiphy later
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Prevent the overwriting of max_tx_fragments if it has already been set
in chip-specific init routine.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

It is only used by the driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Will be used to determine the phy from within the driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Unlike the core phy, this will have extra allocated memory for a driver
private struct.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Will be used for per-phy driver private data
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Allow tracking clients of both wiphys separately
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Adds multiple wiphy support to mt76_get_txpower
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Nothing in the core uses it
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Nothing in the core uses it
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Allows keeping per-wiphy state separate
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Allows tracking tx scheduling separately per phy
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add support for an extra wiphy in mt76_set_channel and mt76_get_survey
This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D

On the first wiphy, hw->priv will point to struct mt76_dev, which contains a
struct mt76_phy at the start. For the secondary wiphy, hw->priv will point
to a mt76_phy encapsulated in a driver specific struct

To simplify access to struct mt76_phy members from drivers, the driver specific
device struct is changed to add a union of struct mt76_dev and struct mt76_phy
as the first element
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reduces duplication and prepares for further rework
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In associating and configuring beamformee, bfee->role is not
correctly set before rtw_chip_ops::config_bfee().
Fix it by setting it correctly.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Reduce the data size 2kb or 3kb by making tables const.
Add const to pointer declarations to make compilation work too.

(x86-64 defconfig)
$ size drivers/net/wireless/realtek/rtw88/rtw8822?.o*
   text	   data	    bss	    dec	    hex	filename
  25054	    672	      8	  25734	   6486	drivers/net/wireless/realtek/rtw88/rtw8822b.o.new
  23870	   1872	      8	  25750	   6496	drivers/net/wireless/realtek/rtw88/rtw8822b.o.old
  53646	    828	      0	  54474	   d4ca	drivers/net/wireless/realtek/rtw88/rtw8822c.o.new
  52846	   1652	      0	  54498	   d4e2	drivers/net/wireless/realtek/rtw88/rtw8822c.o.old

(x86-64 allyesconfig)
$ size drivers/net/wireless/realtek/rtw88/rtw8822?.o*
   text	   data	    bss	    dec	    hex	filename
  45811	   6280	    128	  52219	   cbfb	drivers/net/wireless/realtek/rtw88/rtw8822b.o.new
  44211	   7880	    128	  52219	   cbfb	drivers/net/wireless/realtek/rtw88/rtw8822b.o.old
 100195	   8128	      0	 108323	  1a723	drivers/net/wireless/realtek/rtw88/rtw8822c.o.new
  98947	   9376	      0	 108323	  1a723	drivers/net/wireless/realtek/rtw88/rtw8822c.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>