1. 26 Jan, 2008 19 commits
  2. 25 Jan, 2008 21 commits
    • Mark Fasheh's avatar
      ocfs2: clean up bh null checks · 2fe5c1d7
      Mark Fasheh authored
      If we know a buffer_head is non-null, then brelse() is unnecessary and
      put_bh() can be used instead. Also, an explicit check for NULL is
      unnecessary when using brelse(). This patch only covers buffer_head_io.c and
      resize.c, which have recently added code which exhibits this problem.
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      2fe5c1d7
    • Mark Fasheh's avatar
      ocfs2: document access rules for blocked_lock_list · 7ec373cf
      Mark Fasheh authored
      ocfs2_super->blocked_lock_list and ocfs2_super->blocked_lock_count have some
      usage restrictions which aren't immediately obvious to anyone reading the
      code. It's a good idea to document this so that we avoid making costly
      mistakes in the future.
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      7ec373cf
    • Joonwoo Park's avatar
      configfs: file.c fix possible recursive locking · 116ba5d5
      Joonwoo Park authored
      configfs_register_subsystem() with default_groups triggers recursive locking.
      it seems that mutex_lock_nested is needed.
      
      =============================================
      [ INFO: possible recursive locking detected ]
      2.6.24-rc6 #145
      ---------------------------------------------
      swapper/1 is trying to acquire lock:
       (&sb->s_type->i_mutex_key#3){--..}, at: [<c40c9a9e>] configfs_add_file+0x2e/0x70
      
      but task is already holding lock:
       (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca985>] configfs_register_subsystem+0x55/0x130
      
      other info that might help us debug this:
      1 lock held by swapper/1:
       #0:  (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca985>] configfs_register_subsystem+0x55/0x130
      
      stack backtrace:
      Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #145
       [<c40053ba>] show_trace_log_lvl+0x1a/0x30
       [<c4005e82>] show_trace+0x12/0x20
       [<c400687e>] dump_stack+0x6e/0x80
       [<c404ec72>] __lock_acquire+0xe62/0x1120
       [<c404efb2>] lock_acquire+0x82/0xa0
       [<c43fda88>] mutex_lock_nested+0x98/0x2e0
       [<c40c9a9e>] configfs_add_file+0x2e/0x70
       [<c40c9b0c>] configfs_create_file+0x2c/0x40
       [<c40ca639>] configfs_attach_item+0x139/0x220
       [<c40ca734>] configfs_attach_group+0x14/0x140
       [<c40ca7e9>] configfs_attach_group+0xc9/0x140
       [<c40ca9f6>] configfs_register_subsystem+0xc6/0x130
       [<c45c8186>] init_netconsole+0x2b6/0x300
       [<c45a75f2>] kernel_init+0x142/0x320
       [<c4004fb3>] kernel_thread_helper+0x7/0x14
       =======================
      Signed-off-by: default avatarJoonwoo Park <joonwpark81@gmail.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      116ba5d5
    • Joonwoo Park's avatar
      configfs: dir.c fix possible recursive locking · ba611edf
      Joonwoo Park authored
      configfs_register_subsystem() with default_groups triggers recursive locking.
      it seems that mutex_lock_nested is needed.
      
      =============================================
      [ INFO: possible recursive locking detected ]
      2.6.24-rc6 #141
      ---------------------------------------------
      swapper/1 is trying to acquire lock:
       (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca76f>] configfs_attach_group+0x4f/0x190
      
      but task is already holding lock:
       (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca9d5>] configfs_register_subsystem+0x55/0x130
      
      other info that might help us debug this:
      1 lock held by swapper/1:
       #0:  (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca9d5>] configfs_register_subsystem+0x55/0x130
      
      stack backtrace:
      Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #141
       [<c40053ba>] show_trace_log_lvl+0x1a/0x30
       [<c4005e82>] show_trace+0x12/0x20
       [<c400687e>] dump_stack+0x6e/0x80
       [<c404ec72>] __lock_acquire+0xe62/0x1120
       [<c404efb2>] lock_acquire+0x82/0xa0
       [<c43fdad8>] mutex_lock_nested+0x98/0x2e0
       [<c40ca76f>] configfs_attach_group+0x4f/0x190
       [<c40caa46>] configfs_register_subsystem+0xc6/0x130
       [<c45c8186>] init_netconsole+0x2b6/0x300
       [<c45a75f2>] kernel_init+0x142/0x320
       [<c4004fb3>] kernel_thread_helper+0x7/0x14
       =======================
      Signed-off-by: default avatarJoonwoo Park <joonwpark81@gmail.com>
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      ba611edf
    • Joel Becker's avatar
      configfs: Remove EXPERIMENTAL · 02ac0499
      Joel Becker authored
      configfs has been alive and kicking for a while now.  It underpins some
      non-EXPERIMENTAL subsystems, such as OCFS2's cluster stack.
      Signed-off-by: default avatarJoel Becker <joel.becker@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      02ac0499
    • Mark Fasheh's avatar
      ocfs2: bump version number · 0e5ae032
      Mark Fasheh authored
      Bump the printed version to 1.5.0. This helps us quickly identify which
      version of Ocfs2 a bug filer is running.
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      0e5ae032
    • Tao Ma's avatar
      ocfs2/dlm: Clear joining_node on hearbeat node down · 2d4b1cbb
      Tao Ma authored
      Currently the process of dlm join contains 2 steps: query join and assert join.
      After query join, the joined node will set its joining_node. So if the joining
      node happens to panic before the 2nd step, the joined node will fail to clear
      its joining_node flag because that node isn't in the domain map. It at least
      cause 2 problems.
      1. All the new join request will fail. So no new node can mount the volume.
      2. The joined node can't umount the volume since during the umount process it
         has to wait for the joining_node to be unknown. So the umount will be hanged.
      
      The solution is to clear the joining_node before we check the domain map.
      Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      2d4b1cbb
    • Marcin Slusarz's avatar
      ocfs2: convert byte order of constant instead of variable · 4092d49f
      Marcin Slusarz authored
      Convert byte order of constant instead of variable it will be done at
      compile time vs run time. Remove unused le32_and_cpu.
      Signed-off-by: default avatarMarcin Slusarz <marcin.slusarz@gmail.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      4092d49f
    • Sunil Mushran's avatar
      ocfs2: Update default cluster timeouts · 17104683
      Sunil Mushran authored
      Lots of people are having trouble with the default timeouts, which are too
      low. These new values are derived from an informal survey taken on
      ocfs2-users, as well as data from bug reports. This should reduce the amount
      of cluster disconnects and subsequent fencing seen during normal workloads.
      Signed-off-by: default avatarSunil Mushran <sunil.mushran@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      17104683
    • Jan Kara's avatar
      ocfs2: printf fixes · 634bf74d
      Jan Kara authored
      Explicitely convert loff_t to long long in printf. Just for sure...
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      634bf74d
    • Jan Kara's avatar
      ocfs2: Use generic_file_llseek · 32c3c0e2
      Jan Kara authored
      We should use generic_file_llseek() and not default_llseek() so that
      s_maxbytes gets properly checked when seeking.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      32c3c0e2
    • Jan Kara's avatar
      ocfs2: Safer read_inline_data() · d2849fb2
      Jan Kara authored
      In ocfs2_read_inline_data() we should store file size in loff_t. Although
      the file size should fit in 32 bits we cannot be sure in case filesystem is
      corrupted.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      d2849fb2
    • Jan Kara's avatar
      ocfs2: Silence false lockdep warnings · 5fa0613e
      Jan Kara authored
      Create separate lockdep lock classes for system file's i_mutexes. They are
      used to guard allocations and similar things and thus rank differently
      than i_mutex of a regular file or directory.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      5fa0613e
    • Mark Fasheh's avatar
      [PATCH 2/2] ocfs2: cluster aware flock() · 53fc622b
      Mark Fasheh authored
      Hook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new
      mount option, "localflocks" is added so that users can revert to old
      functionality as need be.
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      53fc622b
    • Mark Fasheh's avatar
      [PATCH 1/2] ocfs2: add flock lock type · cf8e06f1
      Mark Fasheh authored
      This adds a new dlmglue lock type which is intended to back flock()
      requests.
      
      Since these locks are driven from userspace, usage rules are much more
      liberal than the typical Ocfs2 internal cluster lock. As a result, we can't
      make use of most dlmglue features - lock caching and lock level
      optimizations in particular. Additionally, userspace is free to deadlock
      itself, so we have to deal with that in the same way as the rest of the
      kernel - by allowing a signal to abort a lock request.
      
      In order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock()
      does it's own dlm coordination. We still use the same helper functions
      though, so duplicated code is kept to a minimum.
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      cf8e06f1
    • Sunil Mushran's avatar
      ocfs2: Local alloc window size changeable via mount option · 2fbe8d1e
      Sunil Mushran authored
      Local alloc is a performance optimization in ocfs2 in which a node
      takes a window of bits from the global bitmap and then uses that for
      all small local allocations. This window size is fixed to 8MB currently.
      This patch allows users to specify the window size in MB including
      disabling it by passing in 0. If the number specified is too large,
      the fs will use the default value of 8MB.
      
      mount -o localalloc=X /dev/sdX /mntpoint
      Signed-off-by: default avatarSunil Mushran <sunil.mushran@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      2fbe8d1e
    • Mark Fasheh's avatar
      ocfs2: Support commit= mount option · d147b3d6
      Mark Fasheh authored
      Mostly taken from ext3. This allows the user to set the jbd commit interval,
      in seconds. The default of 5 seconds stays the same, but now users can
      easily increase the commit interval. Typically, this would be increased in
      order to benefit performance at the expense of data-safety.
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      d147b3d6
    • Mark Fasheh's avatar
      ocfs2: Add missing permission checks · 0957f007
      Mark Fasheh authored
      Check that an online resize is being driven by a user with permission to
      change system resource limits.
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      0957f007
    • Tao Ma's avatar
      [PATCH 2/2] ocfs2: Implement group add for online resize · 7909f2bf
      Tao Ma authored
      This patch adds the ability for a userspace program to request that a
      properly formatted cluster group be added to the main allocation bitmap for
      an Ocfs2 file system. The request is made via an ioctl, OCFS2_IOC_GROUP_ADD.
      On a high level, this is similar to ext3, but we use a different ioctl as
      the structure which has to be passed through is different.
      
      During an online resize, tunefs.ocfs2 will format any new cluster groups
      which must be added to complete the resize, and call OCFS2_IOC_GROUP_ADD on
      each one. Kernel verifies that the core cluster group information is valid
      and then does the work of linking it into the global allocation bitmap.
      Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      7909f2bf
    • Tao Ma's avatar
      [PATCH 1/2] ocfs2: Add group extend for online resize · d659072f
      Tao Ma authored
      This patch adds the ability for a userspace program to request an extend of
      last cluster group on an Ocfs2 file system. The request is made via ioctl,
      OCFS2_IOC_GROUP_EXTEND. This is derived from EXT3_IOC_GROUP_EXTEND, but is
      obviously Ocfs2 specific.
      
      tunefs.ocfs2 would call this for an online-resize operation if the last
      cluster group isn't full.
      Signed-off-by: default avatarTao Ma <tao.ma@oracle.com>
      Signed-off-by: default avatarMark Fasheh <mark.fasheh@oracle.com>
      d659072f
    • Hans de Goede's avatar
      [SCSI] usbstorage: use last_sector_bug flag universally · 23c3e290
      Hans de Goede authored
      This patch sets the last_sector_bug flag to 1 for all USB disks. This is
      needed to makes the cardreader on various HP multifunction printers work.
      
      Since the performance impact is negible we set this flag for all USB disks to
      avoid an unusual_devs.h nightmare.
      Signed-off-by: default avatarHans de Goede <j.w.r.degoede@hhs.nl>
      Acked-by: default avatarMatthew Dharm <mdharm-usb@one-eyed-alien.net>
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
      23c3e290