- 25 Jun, 2012 2 commits
-
-
Sangbeom Kim authored
As s5m8767a is revisioned, ramp_delay register is changed. 5mV/uS, 10mV/uS, 25mV/uS, 50mV/uS, 100mV/uS ramp delay can be selected. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Linux 3.5-rc4 contains patches which conflict with some of the development work.
-
- 24 Jun, 2012 8 commits
-
-
Linus Torvalds authored
-
Anatol Pomozov authored
Coult -> Could Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Avi Kivity: "Fixing a scheduling-while-atomic bug in the ppc code, and a bug which allowed pci bridges to be assigned to guests." * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Drop locks around call to kvmppc_pin_guest_page KVM: Fix PCI header check on device assignment
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull InfiniBand/RDMA fixes from Roland Dreier: - Fixes to new ocrdma driver - Typo in test in CMA * tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: QP type check on received REQs should be AND not OR RDMA/ocrdma: Fix off by one in ocrdma_query_gid() RDMA/ocrdma: Fixed RQ error CQE polling RDMA/ocrdma: Correct queue SGE calculation RDMA/ocrdma: Correct reported max queue sizes RDMA/ocrdma: Fixed GID table for vlan and events
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Nothing very controversial in here. Most of the fixes are for OMAP this time around, with some orion/kirkwood and a tegra patch mixed in." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion: Fix Virtual/Physical mixup with watchdog ARM: Kirkwood: clk_register_gate_fn: add fn assignment ARM: Orion5x - Restore parts of io.h, with rework ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code ARM: tegra: make tegra_cpu_reset_handler_enable() __init ARM: OMAP: PM: Lock clocks list while generating summary ARM: iconnect: Remove include of removed linux/spi/orion_spi.h
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing major in here, one radeon SI fix for tiling, and one uninit var fix, two minor header file fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: drop comment about this header being autogenerated. drm/edid: don't return stack garbage from supports_rb vga_switcheroo: Add include guard drm/radeon: SI tiling fixes for display
-
Roland Dreier authored
-
Axel Lin authored
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 Jun, 2012 11 commits
-
-
Andrew Lunn authored
The orion watchdog is expecting to be passed the physcial address of the hardware, and will ioremap() it to give a virtual address it will use as the base address for the hardware. However, when creating the platform resource record, a virtual address was being used. Add the necassary #define's so we can pass the physical address as expected. Tested on Kirkwood and Orion5x. Cc: stable <stable@vger.kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Marc Kleine-Budde authored
In commit: 98d9986c ARM: Kirkwood: Replace clock gating the kirkwood clock gating has been reworked. A custom variant of clock gating, that calls a custom function before gating the clock off, has been introduced. However in clk_register_gate_fn() this custom function "fn" is never assigned. This patch adds the missing fn assignment. Cc: stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Andrew Lunn authored
Commit 4d5fc58d (ARM: remove bunch of now unused mach/io.h files) removed the orion5x io.h. Unfortunately, this is still needed for the definition of IO_SPACE_LIMIT which overrides the default 64K. All Orion based systems have 1Mbyte of IO space per PCI[e] bus, and try to request_resource() this size. Orion5x has two such PCI buses. It is likely that the original, removed version, was broken. This version might be less broken. However, it has not been tested on hardware with a PCI card, let alone hardware with a PCI card with IO capabilities. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley (as per Tony Lindgren's request): "Some uncontroversial OMAP clock, hwmod, and compiler warning fixes for 3.5-rc" * tag 'omap-fixes-a-for-3.5rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP4: hwmod data: Force HDMI in no-idle while enabled ARM: OMAP2+: mux: fix sparse warning ARM: OMAP2+: CM: increase the module disable timeout ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks ARM: OMAP4: hwmod data: fix 32k sync timer idle modes ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby ARM: OMAP: PM: Lock clocks list while generating summary
-
Olof Johansson authored
Merge tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here are a few fixes with the biggest one being fix for Beagle DVI reset. All of them are regression fixes, except for the missing omap2 interrupt controller binding that somehow got missed earlier." * tag 'omap-fixes-for-v3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: Fix Beagleboard DVI reset gpio arm/dts: OMAP2: Fix interrupt controller binding ARM: OMAP2: Fix tusb6010 GPIO interrupt for n8x0 ARM: OMAP2+: Fix MUSB ifdefs for platform init code
-
Axel Lin authored
With this change, regulator_set_voltage_time_sel() can be more generic and not limited to linear and table based mapping now. One side-effect of this change is that list_voltage() must be implemented. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
The chip_id is not used. The voltage_base is not necessary, set base voltage to tps->desc.min_uV instead. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "There are a couple of fixes from Yan for bad pointer dereferences in the messenger code and when fiddling with page->private after page migration, a fix from Alex for a use-after-free in the osd client code, and a couple fixes for the message refcounting and shutdown ordering." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: flush msgr queue during mon_client shutdown rbd: Clear ceph_msg->bio_iter for retransmitted message libceph: use con get/put ops from osd_client libceph: osd_client: don't drop reply reference too early ceph: check PG_Private flag before accessing page->private
-
- 22 Jun, 2012 11 commits
-
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull XFS fixes from Ben Myers: - Fix stale data exposure with unwritten extents - Fix a warning in xfs_alloc_vextent with ODEBUG - Fix overallocation and alignment of pages for xfs_bufs - Fix a cursor leak - Fix a log hang - Fix a crash related to xfs_sync_worker - Rename xfs log structure from struct log to struct xlog so we can use crash dumps effectively * tag 'for-linus-Jun-21-2012' of git://oss.sgi.com/xfs/xfs: xfs: rename log structure to xlog xfs: shutdown xfs_sync_worker before the log xfs: Fix overallocation in xfs_buf_allocate_memory() xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_near xfs: check for stale inode before acquiring iflock on push xfs: fix debug_object WARN at xfs_alloc_vextent() xfs: xfs_vm_writepage clear iomap_valid when !buffer_uptodate (REV2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ftrace: Make all inline tags also include notrace perf: Use css_tryget() to avoid propping up css refcount perf tools: Fix synthesizing tracepoint names from the perf.data headers perf stat: Fix default output file perf tools: Fix endianity swapping for adds_features bitmask
-
Dave Airlie authored
This comment is well out of date. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Axel Lin authored
Convert tps65910_ops and tps65910_ops_vdd3 to regulator_list_voltage_table. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
The min_uV and max_uV fields of struct tps_info are not used in the code. For the case voltage_table is provided, the min_uV and max_uV are the same values as volt_table[0] and volt_table[n_voltages -1]. For the case voltage_table is not available, having the min_uV and max_uV seems misleading. Current code uses equations to get the voltage value in this case, but these equations do not use the min_uV and max_uV fields of struct tps_info. Thus this patch removes the min_uV and max_uV fields from struct tps_info. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Ricardo Neri authored
As per the OMAP4 documentation, audio over HDMI must be transmitted in no-idle mode. This patch adds the HWMOD_SWSUP_SIDLE so that omap_hwmod uses no-idle/force-idle settings instead of smart-idle mode. This is required as the DSS interface clock is used as functional clock for the HDMI wrapper audio FIFO. If no-idle mode is not used, audio could be choppy, have bad quality or not be audible at all. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> [b-cousson@ti.com: Update the subject and align the .flags location with the script template] Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
Paul Walmsley authored
Commit bbd707ac ("ARM: omap2: use machine specific hook for late init") resulted in the addition of this sparse warning: arch/arm/mach-omap2/mux.c:791:12: warning: symbol 'omap_mux_late_init' was not declared. Should it be static? Fix by including the header file containing the prototype. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tony Lindgren <tony@atomide.com>
-
Paul Walmsley authored
Increase the timeout for disabling an IP block to five milliseconds. This is to handle the usb_host_fs idle latency, which takes almost four milliseconds after a host controller reset. This is the second of two patches needed to resolve the following boot warning: omap_hwmod: usb_host_fs: _wait_target_disable failed Thanks to Sergei Shtylyov <sshtylyov@mvista.com> for finding an unrelated hunk in a previous version of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Tero Kristo <t-kristo@ti.com>
-
Paul Walmsley authored
Until the OMAP4 code is converted to disable the use of the clock framework-based clockdomain enable/disable sequence, any clock used as a hwmod main_clk must have a clockdomain associated with it. This patch populates some clock structure clockdomain names to resolve the following warnings during kernel init: omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. omap_hwmod: trace_clk_div_ck: missing clockdomain for trace_clk_div_ck. omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. omap_hwmod: ddrphy_ck: missing clockdomain for ddrphy_ck. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com>
-
Paul Walmsley authored
The 32k sync timer IP block target idle modes in the hwmod data are incorrect. The IP block does not support any smart-idle modes. Update the data to reflect the correct modes. This problem was initially identified and a diff fragment posted to the lists by Benoît Cousson <b-cousson@ti.com>. A patch description bug in the first version was also identified by Benoît. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Tero Kristo <t-kristo@ti.com>
-
Djamil Elaidi authored
If an IP is configured in Smart-Standby-Wakeup, when disabling wakeup feature the IP will not go back to Smart-Standby, but will remain in Smart-Standby-Wakeup. Signed-off-by: Djamil Elaidi <d-elaidi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
-
- 21 Jun, 2012 8 commits
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Fix a write hang due to an uninitalised variable when !defined(CONFIG_NFS_V4) - Address upcall races in the legacy NFSv4 idmapper - Remove an O_DIRECT refcounting issue - Fix a pNFS refcounting bug when the file layout metadata server is also acting as a data server - Fix a pNFS module loading race. * tag 'nfs-for-3.5-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Force the legacy idmapper to be single threaded NFS: Initialise commit_info.rpc_out when !defined(CONFIG_NFS_V4) NFS: Fix a refcounting issue in O_DIRECT NFSv4.1: Fix a race in set_pnfs_layoutdriver NFSv4.1: Fix umount when filelayout DS is also the MDS
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "This is a small pull with btrfs fixes. The biggest of the bunch is another fix for the new backref walking code. We're still hammering out one btrfs dio vs buffered reads problem, but that one will have to wait for the next rc." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: delay iput with async extents Btrfs: add a missing spin_lock Btrfs: don't assume to be on the correct extent in add_all_parents Btrfs: introduce btrfs_next_old_item
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck: "Two minor fixes in emc2103 and applesmc drivers." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (emc2103) Fix use of an uninitilized variable in error case hwmon: (applesmc) Limit key length in warning messages
-
Mark Tinguely authored
Rename the XFS log structure to xlog to help crash distinquish it from the other logs in Linux. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
-
Ben Myers authored
Revert commit 1307bbd2, which uses the s_umount semaphore to provide exclusion between xfs_sync_worker and unmount, in favor of shutting down the sync worker before freeing the log in xfs_log_unmount. This is a cleaner way of resolving the race between xfs_sync_worker and unmount than using s_umount. Signed-off-by: Ben Myers <bpm@sgi.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
-
Jan Kara authored
Commit de1cbee4 which removed b_file_offset in favor of b_bn introduced a bug causing xfs_buf_allocate_memory() to overestimate the number of necessary pages. The problem is that xfs_buf_alloc() sets b_bn to -1 and thus effectively every buffer is straddling a page boundary which causes xfs_buf_allocate_memory() to allocate two pages and use vmalloc() for access which is unnecessary. Dave says xfs_buf_alloc() doesn't need to set b_bn to -1 anymore since the buffer is inserted into the cache only after being fully initialized now. So just make xfs_buf_alloc() fill in proper block number from the beginning. CC: David Chinner <dchinner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
-
Dave Chinner authored
When we fail to find an matching extent near the requested extent specification during a left-right distance search in xfs_alloc_ag_vextent_near, we fail to free the original cursor that we used to look up the XFS_BTNUM_CNT tree and hence leak it. Reported-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
-
Brian Foster authored
An inode in the AIL can be flush locked and marked stale if a cluster free transaction occurs at the right time. The inode item is then marked as flushing, which causes xfsaild to spin and leaves the filesystem stalled. This is reproduced by running xfstests 273 in a loop for an extended period of time. Check for stale inodes before the flush lock. This marks the inode as pinned, leads to a log flush and allows the filesystem to proceed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
-