- 16 Oct, 2018 4 commits
-
-
Selvin Xavier authored
Version macro is not required as the driver is not maintaining the version. Removing the references of this macro too. Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Selvin Xavier authored
Fix possible recursive lock warning. Its a false warning as the locks are part of two differnt HW Queue data structure - cmdq and creq. Debug kernel is throwing the following warning and stack trace. [ 783.914967] ============================================ [ 783.914970] WARNING: possible recursive locking detected [ 783.914973] 4.19.0-rc2+ #33 Not tainted [ 783.914976] -------------------------------------------- [ 783.914979] swapper/2/0 is trying to acquire lock: [ 783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.914999] but task is already holding lock: [ 783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915013] other info that might help us debug this: [ 783.915016] Possible unsafe locking scenario: [ 783.915019] CPU0 [ 783.915021] ---- [ 783.915034] lock(&(&hwq->lock)->rlock); [ 783.915035] lock(&(&hwq->lock)->rlock); [ 783.915037] *** DEADLOCK *** [ 783.915038] May be due to missing lock nesting notation [ 783.915039] 1 lock held by swapper/2/0: [ 783.915040] #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915044] stack backtrace: [ 783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33 [ 783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 783.915048] Call Trace: [ 783.915049] <IRQ> [ 783.915054] dump_stack+0x90/0xe3 [ 783.915058] __lock_acquire+0x106c/0x1080 [ 783.915061] ? sched_clock+0x5/0x10 [ 783.915063] lock_acquire+0xbd/0x1a0 [ 783.915065] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915069] _raw_spin_lock_irqsave+0x4a/0x90 [ 783.915071] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915073] bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915078] tasklet_action_common.isra.17+0x197/0x1b0 [ 783.915081] __do_softirq+0xcb/0x3a6 [ 783.915084] irq_exit+0xe9/0x100 [ 783.915085] do_IRQ+0x6a/0x120 [ 783.915087] common_interrupt+0xf/0xf [ 783.915088] </IRQ> Use nested notation for the spin_lock to avoid this warning. Signed-off-by: -
Selvin Xavier authored
Add the missing initalization of the cq_lock and qplib.flush_lock. Fixes: 942c9b6c ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Signed-off-by:
-
Jason Gunthorpe authored
From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git This is required to resolve dependencies of the next series of RDMA patches. The code motion conflicts in drivers/infiniband/core/cache.c were resolved. Signed-off-by:
-
- 10 Oct, 2018 1 commit
-
-
Valentine Fatiev authored
The function that puts back the MR in cache also removes the DMA address from the HCA. Therefore we need to call this function before we remove the DMA mapping from MMU. Otherwise the HCA may access a memory that is no longer DMA mapped. Call trace: NMI: IOCK error (debug interrupt?) for reason 71 on CPU 0. CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc6+ #4 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 08/20/2012 RIP: 0010:intel_idle+0x73/0x120 Code: 80 5c 01 00 0f ae 38 0f ae f0 31 d2 65 48 8b 04 25 80 5c 01 00 48 89 d1 0f 60 02 RSP: 0018:ffffffff9a403e38 EFLAGS: 00000046 RAX: 0000000000000030 RBX: 0000000000000005 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff9a5790c0 RDI: 0000000000000000 RBP: 0000000000000030 R08: 0000000000000000 R09: 0000000000007cf9 R10: 000000000000030a R11: 0000000000000018 R12: 0000000000000000 R13: ffffffff9a5792b8 R14: ffffffff9a5790c0 R15: 0000002b48471e4d FS: 0000000000000000(0000) GS:ffff9c6caf400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5737185000 CR3: 0000000590c0a002 CR4: 00000000000606f0 Call Trace: cpuidle_enter_state+0x7e/0x2e0 do_idle+0x1ed/0x290 cpu_startup_entry+0x6f/0x80 start_kernel+0x524/0x544 ? set_init_arg+0x55/0x55 secondary_startup_64+0xa4/0xb0 DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read] Request device [04:00.0] fault addr b34d2000 [fault reason 06] PTE Read access is not set DMAR: [DMA Read] Request device [01:00.2] fault addr bff8b000 [fault reason 06] PTE Read access is not set Fixes: f3f134f5 ("RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory") Signed-off-by:
Valentine Fatiev <valentinef@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
- 05 Oct, 2018 3 commits
-
-
Leon Romanovsky authored
Tracking CM_ID resource is performed in two stages: creation of cm_id and connecting it to the cma_dev. It is needed because rdma-cm protocol exports two separate user-visible calls rdma_create_id and rdma_accept. At the time of CM_ID creation, the real owner of that object is unknown yet and we need to grab task_struct. This task_struct is released or reassigned in attach phase later on. but call to rdma_destroy_id left this task_struct unreleased. Such separation is unique to CM_ID and other restrack objects initialize in one shot. It means that it is safe to use "res->valid" check to catch unfinished CM_ID flow and release task_struct for that object. Fixes: 00313983 ("RDMA/nldev: provide detailed CM_ID information") Reported-by:
Artemy Kovalyov <artemyko@mellanox.com> Reviewed-by:
Yossi Itigin <yosefe@mellanox.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Leon Romanovsky authored
Unify task update and kernel name set in one place. Reviewed-by:
-
Leon Romanovsky authored
Prepare rdma_restrack_set_task() call to accommodate more code by moving its implementation from *.h to *.c. Reviewed-by:
-
- 04 Oct, 2018 1 commit
-
-
Parav Pandit authored
rdma_find_ndev_for_src_ip_rcu() returns either valid netdev pointer or ERR_PTR(). Instead of checking for NULL, check for error. Fixes: caf1e3ae ("RDMA/core Introduce and use rdma_find_ndev_for_src_ip_rcu") Reported-by: syzbot+20c32fa6ff84a2d28c36@syzkaller.appspotmail.com Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
- 03 Oct, 2018 22 commits
-
-
Venkata Sandeep Dhanalakota authored
This patch moves ruc_loopback() from hfi1 into rdmavt for code sharing with the qib driver. Reviewed-by:
Brian Welty <brian.welty@intel.com> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Venkata Sandeep Dhanalakota authored
Moving send completion code into rdmavt in order to have shared logic between qib and hfi1 drivers. Reviewed-by:
-
Brian Welty authored
This patch moves hfi1_copy_sge() into rdmavt for sharing with qib. This patch also moves all the wss_*() functions into rdmavt as several wss_*() functions are called from hfi1_copy_sge() When SGE copy mode is adaptive, cacheless copy may be done in some cases for performance reasons. In those cases, X86 cacheless copy function is called since the drivers that use rdmavt and may set SGE copy mode to adaptive are X86 only. For this reason, this patch adds "depends on X86_64" to rdmavt/Kconfig. Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP; ~ ^~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP; ~ ^~~~~~~~~~~~~~~~~ The type mlx4_ib_qp_flags explicitly provides supplemental values to the type ib_qp_create_flags. Make that clear to Clang by changing the create_flags type to u32. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Lijun Ou authored
The atomic operation not supported inline. Besides, the standard atomic operation only support a sge and the sge is placed in the wqe. Fix: 384f8818("RDMA/hns: Add atomic support") Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Lijun Ou authored
In order to extend vlan device range, the design add two field of qp context for checking vlan packet in sender and in recevicer. Signed-off-by:
-
Lijun Ou authored
This patch adds local invalidate Memory Region (MR) support in the kernel space driver. Signed-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
-
Lijun Ou authored
The hip08 hardware has two version. the version id are 0x20 and 0x21 according to the pci revision. It needs to adjust some fields for extending new features. The specific updates include: 1. Add some fields for supporting new features by enabling some reserved fields in 0x20 version. 2. remove some fields which the user is not visiable in order to support the extend features. 3. Init some fields with zero. These updates is compatible with 0x20 version. Signed-off-by:
-
Lijun Ou authored
According to hip08 limit, the buffer size of extend sge needs to be an integer wqe_sge_buf_page size. For example, the value of sge_shift field of qp context is greater or equal to eight when buffer page size is 4K size. The value of sge_shift field of qp context assigned by hr_qp->sge.sge_cnt. Signed-off-by:
-
Lijun Ou authored
According to the IB protocol definition, the driver needs to show the correct device information and the information will be queryed by device attribute. Signed-off-by:
-
Lijun Ou authored
In order to compatible with the third party RoCE device, The hardware modify the set method for the ecn field of ip header in new hip08 version. The high 6bit of tclass be assigned for dscp field of packet. Signed-off-by:
-
Lijun Ou authored
The hip08 split two hardware version. The version id are 0x20 and 0x21 according to the PCI revison. The max size of extend sge of sq is limited to 2M for 0x20 version and 8M for 0x21 version. It may be exceeded to 2M according to the algorithm that compute the product of wqe count and extend sge number of every wqe. But the product always less than 8M. Signed-off-by:
-
Lijun Ou authored
It will print the warning when the MSB bit of SLID is not zero running cm_req_handler function that test CM. It needs to fixed zero when test RoCE device. Signed-off-by:
-
Lijun Ou authored
When user issues a RDMA read and enables sq inline, it needs to report a bad wr to user. Signed-off-by:
-
Lijun Ou authored
It needs to include two special qps for every port. The hip08 have four ports and the all reserved qp numbers are eight. Signed-off-by:
-
Leon Romanovsky authored
All users of rdma_nl_chk_listeners() are interested to get boolean answer if netlink socket has listeners, so update all places to boolean function. Signed-off-by:
-
Kamal Heib authored
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it. Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Reviewed-by:
-
Kamal Heib authored
This function is not in use - delete it. Signed-off-by:
-
Zhu Yanjun authored
In rxe_queue_init, q and q->buf are allocated. In do_mmap_info, q->ip is allocated. When error occurs, rxe_srq_from_init and the later error handler do not free these allocated memories. This will make memory leak. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the mthca_cmd_init() error handling case instead of 0, as done elsewhere in this function. Fixes: 80fd8238 ("[PATCH] IB/mthca: Encapsulate command interface init") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Jason Gunthorpe authored
The uapi radix tree is a write-once data structure protected by kref. Once we get to the ioctl() fop it is not possible for anything else to be writing to it, so the access should use rcu_dereference_protected. Reported-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Jason Gunthorpe authored
The zap_vma_ptes() is declared but not defined on NOMMU kernels, causing a link error for the newly added uverbs code: drivers/infiniband/core/uverbs_main.o: In function `uverbs_user_mmap_disassociate': uverbs_main.c:(.text+0x114c): undefined reference to `zap_vma_ptes' drivers/infiniband/core/uverbs_main.o: In function `rdma_umap_open': uverbs_main.c:(.text+0x53c): undefined reference to `zap_vma_ptes' Since all user access for all of our drivers depend on remapping pages to user space disable USER_ACCESS when there is no mmu. Fixes: 5f9794dc ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 01 Oct, 2018 9 commits
-
-
Parav Pandit authored
When RDMA CM connect request arrives for IB transport, it already contains device, port, netdevice (optional). Instead of traversing all the cma devices, use the cma device already found by the cma_find_listener() for which a listener id is provided. iWarp devices doesn't need to derive RoCE GIDs, therefore drop RoCE specific checks from cma_acquire_dev() and rename it to cma_iw_acquire_dev(). Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Light weight version of cma_acquire_dev() just for binding with rdma device based on source IP(v4/v6) address. This simplifies cma_acquire_dev() to avoid listen_id specific checks and also for subsequent simplification for IB vs iWarp. Signed-off-by:
-
Parav Pandit authored
When IP failover is used between multiple ports of a given rdma device, allow accepting CM requests from either of the ports. This is applicable for IPv4 and IPv6 non link local addressing scheme. IPv6 link local addresses are bound. IP failover requests for listen cm_ids bound to specific netdev interfaces cannot be supported. (Similar to traditional sockets). Signed-off-by:
-
Kaike Wan authored
Subnet Management Packets (SMP) should exclusively use VL15 and their SL is ignored (IBTA v1.3, Section 3.5.8.2). Therefore, when an SMP is posted, the SL in the address handle can be set to 0 by a user application. Consequently, when an address handle is created by the IB core, some fields in struct rvt_ah may not be set correctly by using the SL2SC and SC2VL tables at the time. Subsequently, when the request is post sent, the incoming swqe may fail the validation check, resulting in the rejection of the send request. This patch fixes the problem by using VL15 for any validation, ignoring the SL in the address handle. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Alex Estrin authored
Since Virtual Lanes BCT credits and MTU are set through separate MADs, we have to ensure both are valid, and data VLs are ready for transmission before we allow port transition to Armed state. Fixes: 5e2d6764 ("IB/hfi1: Verify port data VLs credits on transition to Armed") Reviewed-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
-
Dennis Dalessandro authored
The dlid assignment made by looking into the u_ucast_dlid array does not do an explicit check for the size of the array. The code path to arrive at def_port, the index value is long and complicated so its best to just have an explicit check here. Signed-off-by:
-
Kaike Wan authored
This patch adds the static trace for resource wait. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
-
Dennis Dalessandro authored
Current implementation allows each qp to have only one send engine. As such, each qp has only one list to queue prebuilt packets when send engine resources are not available. To improve performance, it is desired to support multiple send engines for each qp. This patch creates the framework to support two send engines (two legs) for each qp for the TID RDMA protocol, which can be easily extended to support more send engines. It achieves the goal by creating a leg specific struct, iowait_work in the iowait struct, to hold the work_struct and the tx_list as well as a pointer to the parent iowait struct. The hfi1_pkt_state now has an additional field to record the current legs work structure and that is now passed to all egress waiters to determine the leg that needs to wait via a new iowait helper. The APIs are adjusted to use the new leg specific struct as required. Many new and modified helpers are added to support this change. Reviewed-by:
-
Kaike Wan authored
The driver-provided function check_send_wqe allows the hardware driver to check and set up the incoming send wqe before it is inserted into the swqe ring. This patch will rename it as setup_wqe to better reflect its usage. In addition, this function is only called when all setup is complete in rdmavt. Reviewed-by:
-
