- 25 May, 2011 22 commits
-
-
KOSAKI Motohiro authored
Currently, memory hotplug calls setup_per_zone_wmarks() and calculate_zone_inactive_ratio(), but doesn't call setup_per_zone_lowmem_reserve(). It means the number of reserved pages aren't updated even if memory hot plug occur. This patch fixes it. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
Commit bce7394a ("page-allocator: reset wmark_min and inactive ratio of zone when hotplug happens") introduced invalid section references. Now, setup_per_zone_inactive_ratio() is marked __init and then it can't be referenced from memory hotplug code. This patch marks it as __meminit and also marks caller as __ref. Signed-off-by:
-
KOSAKI Motohiro authored
When an oom killing occurs, almost all processes are getting stuck at the following two points. 1) __alloc_pages_nodemask 2) __lock_page_or_retry 1) is not very problematic because TIF_MEMDIE leads to an allocation failure and getting out from page allocator. 2) is more problematic. In an OOM situation, zones typically don't have page cache at all and memory starvation might lead to greatly reduced IO performance. When a fork bomb occurs, TIF_MEMDIE tasks don't die quickly, meaning that a fork bomb may create new process quickly rather than the oom-killer killing it. Then, the system may become livelocked. This patch makes the pagefault interruptible by SIGKILL. Signed-off-by:
-
KOSAKI Motohiro authored
commit 2687a356 ("Add lock_page_killable") introduced killable lock_page(). Similarly this patch introdues killable wait_on_page_locked(). Signed-off-by:
-
KOSAKI Motohiro authored
commit 2ac39037 ("writeback: add /sys/devices/system/node/<node>/vmstat") added vmstat entry. But strangely it only show nr_written and nr_dirtied. # cat /sys/devices/system/node/node20/vmstat nr_written 0 nr_dirtied 0 Of course, It's not adequate. With this patch, the vmstat show all vm stastics as /proc/vmstat. # cat /sys/devices/system/node/node0/vmstat nr_free_pages 899224 nr_inactive_anon 201 nr_active_anon 17380 nr_inactive_file 31572 nr_active_file 28277 nr_unevictable 0 nr_mlock 0 nr_anon_pages 17321 nr_mapped 8640 nr_file_pages 60107 nr_dirty 33 nr_writeback 0 nr_slab_reclaimable 6850 nr_slab_unreclaimable 7604 nr_page_table_pages 3105 nr_kernel_stack 175 nr_unstable 0 nr_bounce 0 nr_vmscan_write 0 nr_writeback_temp 0 nr_isolated_anon 0 nr_isolated_file 0 nr_shmem 260 nr_dirtied 1050 nr_written 938 numa_hit 962872 numa_miss 0 numa_foreign 0 numa_interleave 8617 numa_local 962872 numa_other 0 nr_anon_transparent_hugepages 0 [akpm@linux-foundation.org: no externs in .c files] Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Namhyung Kim authored
Because 'ret' is declared as int, not unsigned long, no need to cast the error contants into unsigned long. If you compile this code on a 64-bit machine somehow, you'll see following warning: CC mm/nommu.o mm/nommu.c: In function `do_mmap_pgoff': mm/nommu.c:1411: warning: overflow in implicit constant conversion Signed-off-by:Namhyung Kim <namhyung@gmail.com> Acked-by:
Greg Ungerer <gerg@uclinux.org> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Namhyung Kim authored
If f_op->read() fails and sysctl_nr_trim_pages > 1, there could be a memory leak between @region->vm_end and @region->vm_top. Signed-off-by:
-
Namhyung Kim authored
Now we have the sorted vma list, use it in do_munmap() to check that we have an exact match. Signed-off-by:
-
Namhyung Kim authored
Now we have the sorted vma list, use it in the find_vma[_exact]() rather than doing linear search on the rb-tree. Signed-off-by:
-
Namhyung Kim authored
Since commit 297c5eee ("mm: make the vma list be doubly linked") made it a doubly linked list, we don't need to scan the list when deleting @vma. And the original code didn't update the prev pointer. Fix it too. Signed-off-by:
-
Namhyung Kim authored
When I was reading nommu code, I found that it handles the vma list/tree in an unusual way. IIUC, because there can be more than one identical/overrapped vmas in the list/tree, it sorts the tree more strictly and does a linear search on the tree. But it doesn't applied to the list (i.e. the list could be constructed in a different order than the tree so that we can't use the list when finding the first vma in that order). Since inserting/sorting a vma in the tree and link is done at the same time, we can easily construct both of them in the same order. And linear searching on the tree could be more costly than doing it on the list, it can be converted to use the list. Also, after the commit 297c5eee ("mm: make the vma list be doubly linked") made the list be doubly linked, there were a couple of code need to be fixed to construct the list properly. Patch 1/6 is a preparation. It maintains the list sorted same as the tree and construct doubly-linked list properly. Patch 2/6 is a simple optimization for the vma deletion. Patch 3/6 and 4/6 convert tree traversal to list traversal and the rest are simple fixes and cleanups. This patch: @vma added into @mm should be sorted by start addr, end addr and VMA struct addr in that order because we may get identical VMAs in the @mm. However this was true only for the rbtree, not for the list. This patch fixes this by remembering 'rb_prev' during the tree traversal like find_vma_prepare() does and linking the @vma via __vma_link_list(). After this patch, we can iterate the whole VMAs in correct order simply by using @mm->mmap list. [akpm@linux-foundation.org: avoid duplicating __vma_link_list()] Signed-off-by:
-
Sergey Senozhatsky authored
Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by:
Christoph Lameter <cl@linux.com> Acked-by:
-
Shaohua Li authored
Avoid merging a VMA with another VMA which is cloned from the parent process. The cloned VMA shares the anon_vma lock with the parent process's VMA. If we do the merge, more vmas (even the new range is only for current process) use the perent process's anon_vma lock. This introduces scalability issues. find_mergeable_anon_vma() already considers this case. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Shaohua Li authored
If we only change vma->vm_end, we can avoid taking anon_vma lock even if 'insert' isn't NULL, which is the case of split_vma. As I understand it, we need the lock before because rmap must get the 'insert' VMA when we adjust old VMA's vm_end (the 'insert' VMA is linked to anon_vma list in __insert_vm_struct before). But now this isn't true any more. The 'insert' VMA is already linked to anon_vma list in __split_vma(with anon_vma_clone()) instead of __insert_vm_struct. There is no race rmap can't get required VMAs. So the anon_vma lock is unnecessary, and this can reduce one locking in brk case and improve scalability. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Rik van Riel <riel@redhat.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Shaohua Li authored
Make some variables have correct alignment/section to avoid cache issue. In a workload which heavily does mmap/munmap, the variables will be used frequently. Signed-off-by:
-
David Rientjes authored
Architectures that implement their own show_mem() function did not pass the filter argument to show_free_areas() to appropriately avoid emitting the state of nodes that are disallowed in the current context. This patch now passes the filter argument to show_free_areas() so those nodes are now avoided. This patch also removes the show_free_areas() wrapper around __show_free_areas() and converts existing callers to pass an empty filter. ia64 emits additional information for each node, so skip_free_areas_zone() must be made global to filter disallowed nodes and it is converted to use a nid argument rather than a zone for this use case. Signed-off-by:
-
Sebastian Andrzej Siewior authored
This is not useful: it provides page->virtual and is used with highmem. xtensa has no support for highmem and those HIGHMEM bits which are found by grep are partly implemented. The interesting functions like kmap() are missing. If someone actually implements the complete HIGHMEM support he could use HASHED_PAGE_VIRTUAL like most others do. Signed-off-by:
Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Chris Zankel <chris@zankel.net> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
It is not referenced by any Makefile. pte_alloc_one_kernel() and pte_alloc_one() is implemented in arch/xtensa/include/asm/pgalloc.h. Signed-off-by:
-
Liu Yuan authored
It should check if strict_strtoul() succeeds. [akpm@linux-foundation.org: don't override strict_strtoul() return value] Signed-off-by:
Liu Yuan <tailai.ly@taobao.com> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Minchan Kim authored
It has been reported on some laptops that kswapd is consuming large amounts of CPU and not being scheduled when SLUB is enabled during large amounts of file copying. It is expected that this is due to kswapd missing every cond_resched() point because; shrink_page_list() calls cond_resched() if inactive pages were isolated which in turn may not happen if all_unreclaimable is set in shrink_zones(). If for whatver reason, all_unreclaimable is set on all zones, we can miss calling cond_resched(). balance_pgdat() only calls cond_resched if the zones are not balanced. For a high-order allocation that is balanced, it checks order-0 again. During that window, order-0 might have become unbalanced so it loops again for order-0 and returns that it was reclaiming for order-0 to kswapd(). It can then find that a caller has rewoken kswapd for a high-order and re-enters balance_pgdat() without ever calling cond_resched(). shrink_slab only calls cond_resched() if we are reclaiming slab pages. If there are a large number of direct reclaimers, the shrinker_rwsem can be contended and prevent kswapd calling cond_resched(). This patch modifies the shrink_slab() case. If the semaphore is contended, the caller will still check cond_resched(). After each successful call into a shrinker, the check for cond_resched() remains in case one shrinker is particularly slow. [mgorman@suse.de: preserve call to cond_resched after each call into shrinker] Signed-off-by:Mel Gorman <mgorman@suse.de> Signed-off-by:
Colin King <colin.king@canonical.com> Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Chris Mason <chris.mason@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [2.6.38+] Signed-off-by:
-
Johannes Weiner authored
There are a few reports of people experiencing hangs when copying large amounts of data with kswapd using a large amount of CPU which appear to be due to recent reclaim changes. SLUB using high orders is the trigger but not the root cause as SLUB has been using high orders for a while. The root cause was bugs introduced into reclaim which are addressed by the following two patches. Patch 1 corrects logic introduced by commit 1741c877 ("mm: kswapd: keep kswapd awake for high-order allocations until a percentage of the node is balanced") to allow kswapd to go to sleep when balanced for high orders. Patch 2 notes that it is possible for kswapd to miss every cond_resched() and updates shrink_slab() so it'll at least reach that scheduling point. Chris Wood reports that these two patches in isolation are sufficient to prevent the system hanging. AFAIK, they should also resolve similar hangs experienced by James Bottomley. This patch: Johannes Weiner poined out that the logic in commit 1741c877 ("mm: kswapd: keep kswapd awake for high-order allocations until a percentage of the node is balanced") is backwards. Instead of allowing kswapd to go to sleep when balancing for high order allocations, it keeps it kswapd running uselessly. Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by:
-
Christoph Lameter authored
Commit 442b06bc ("slub: Remove node check in slab_free") added a call to deactivate_slab() in the debug case in __slab_alloc(), which unlocks the current slab used for allocation. Going to the label 'unlock_out' then does it again. Also, in the debug case we do not need all the other processing that the 'unlock_out' path does. We always fall back to the slow path in the debug case. So the tid update is useless. Similarly, ALLOC_SLOWPATH would just be incremented for all allocations. Also a pretty useless thing. So simply restore irq flags and return the object. Signed-off-by:
James Morris <jmorris@namei.org> Reported-by:
Ingo Molnar <mingo@elte.hu> Reported-by:
Jens Axboe <jaxboe@fusionio.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
- 24 May, 2011 18 commits
-
-
git://git.fluff.org/bjdooks/linuxLinus Torvalds authored
* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits) mach-ux500: set proper I2C platform data from MOP500s i2c-nomadik: break out single messsage transmission i2c-nomadik: reset the hw after status check i2c-nomadik: remove the unnecessary delay i2c-nomadik: change the TX and RX threshold i2c-nomadik: add code to retry on timeout failure i2c-nomadik: use pm_runtime API i2c-nomadik: print abort cause only on abort tag i2c-nomadik: correct adapter timeout initialization i2c-nomadik: remove the redundant error message i2c-nomadik: corrrect returned error numbers i2c-nomadik: fix speed enumerator i2c-nomadik: make i2c timeout specific per i2c bus i2c-nomadik: add regulator support i2c: i2c-sh_mobile bus speed platform data V2 i2c: i2c-sh_mobile clock string removal i2c-eg20t: Support new device ML7223 IOH i2c: tegra: Add de-bounce cycles. i2c: tegra: fix repeated start handling i2c: tegra: recover from spurious interrupt storm ...
-
Ben Dooks authored
Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', 'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c
-
Linus Walleij authored
This specifies the new per-platform timeout per I2C bus and switches the I2C buses to fast mode, and increase the FIFO depth to 8 for reads and writes. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
Linus Walleij authored
Reduce code size in the message transfer function by factoring out a single-message transfer function. Signed-off-by:
-
Virupax Sadashivpetimath authored
In case of I2C timeout, reset the HW only after the HW status is read, otherwise the staus will be lost. Signed-off-by:
Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by:
Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by:
Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by:
-
Virupax Sadashivpetimath authored
The delay in the driver seems to be not needed, so remove it. Signed-off-by:
Markus Grape <markus.grape@stericsson.com> Tested-by:
Per Persson <per.xb.persson@stericsson.com> Tested-by:
Chethan Krishna N <chethan.krishna@stericsson.com> Reviewed-by:
-
Virupax Sadashivpetimath authored
1) Increase RX FIFO threshold so that there is a reduction in the number of interrupts handled to complete a transaction. 2) Fill TX FIFO in the write function. Signed-off-by:
-
Virupax Sadashivpetimath authored
It is seen that i2c-nomadik controller randomly stops generating the interrupts leading to a i2c timeout. As a workaround to this problem, add retries to the on going transfer on failure. Signed-off-by:
-
Rabin Vincent authored
Use the pm_runtime API for pins control. Signed-off-by:
Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by:
-
Virupax Sadashivpetimath authored
Modify the code to: 1)Print the cause of i2c failure only if the status is set to ABORT. 2)Print slave address on send/receive fail, will help in which slave failed. Signed-off-by:
-
Virupax Sadashivpetimath authored
Correct the incorrect initialization of adapter timeout not to be in milliseconds, as it needs to be done in jiffies. Signed-off-by:
-
srinidhi kasagar authored
The abort cause string itself is an error, so remove the redundant explicit error message. Signed-off-by:
-
Virupax Sadashivpetimath authored
The code was returning bad error numbers or just -1 in some cases. Signed-off-by:
-
Linus Walleij authored
The I2C speed enumerators in the i2c-nomadik header file were in the wrong order. Signed-off-by:
-
Virupax Sadashivpetimath authored
Add option to have different i2c timeout delay for different i2c buses specified in platform data. Default to the old value unless specified. Signed-off-by:
-
Jonas Aberg authored
This on-chip I2C controller needs to fetch the regulator representing its voltage domain so that it won't be switched off. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-parport: Various cleanups i2c-i801: Don't depend on other kernel driver config options i2c-i801: Check for vendor Fujitsu before probing for apanel i2c-i801: Don't probe for slaves on IDF channels i2c-i801: SMBus patch for Intel Panther Point DeviceIDs i2c/writing-clients: Fix foo_driver.id_table
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: jbd: Fix comment to match the code in journal_start() jbd/jbd2: remove obsolete summarise_journal_usage. jbd: Fix forever sleeping process in do_get_write_access() ext2: fix error msg when mounting fs with too-large blocksize jbd: fix fsync() tid wraparound bug ext3: Fix fs corruption when make_indexed_dir() fails ext3: Fix lock inversion in ext3_symlink()
-
