- 03 May, 2010 2 commits
-
-
Peter Ujfalusi authored
OUTL/R are leftovers from the original driver, and they are no longer needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Peter Ujfalusi authored
This patch orders the APLL and AIF power sequence in case of HiFi (audio in TWL4030 terms) playback/capture. We also need to make sure that the AIF is running during playback/capture, when there is no valid DAPM route available. For this purpose I introduce these virtual widgets: /* To have complete playback route all the time */ DAPM_OUTPUT("Virtual HiFi OUT") /* Will keep AIF/APLL enabled */ /* To have complete capture route all the time */ DAPM_INPUT("Virtual HiFi IN") /* Will keep AIF/APLL enabled */ /* To have complete playback route for the voice module */ DAPM_OUTPUT("Virtual Voice OUT") /* Will keep APLL enabled */ The DAPM_SUPPLY widgets for APLL and AIF are placed in a way, that during any audio activity the needed configuration of AIF and APLL will be enabled (playback, capture, analog loopback, digital loopback, and voice activity). The apll reference counting code has been lifted, and modified from Liam Girdwood's earlier patch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 28 Apr, 2010 3 commits
-
-
Liam Girdwood authored
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Liam Girdwood authored
Remove bogus twl4030 pins Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Liam Girdwood authored
Remove bogus TWL4030 pins. Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 27 Apr, 2010 5 commits
-
-
Takashi Iwai authored
Merge branch 'for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
-
Jarkko Nikula authored
This patch adds the TLV320AIC3x supplies and enables all of them for the entire lifetime of the device. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Jarkko Nikula authored
Move PLL enable from BIAS_ON state to BIAS_PREPARE to be pair with BIAS_STANDBY where PLL is disabled. Remove also old comments about power control. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Jarkko Nikula authored
These ADC, DAC and output pin power off commands are needless in aic3x_set_bias_level since they are not enabled in aic3x_init and they are defined in aic3x_dapm_widgets so the ASoC DAPM will take care of them anyway. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Jarkko Nikula authored
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 26 Apr, 2010 8 commits
-
-
Vladimir Zapolskiy authored
This patch adds support for Philips UDA1345 CODEC. The CODEC has only volume control, de-emphasis, mute, DC filtering and power control features. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Reported-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Peter Ujfalusi authored
Delay reporting for the three implemented DAC33 FIFO modes. DAC33 has FIFO depth status register(s), but it can not be used, since inside of pcm_pointer we can not send I2C commands. Timestamp based estimation need to be used. The method of calculating the delay depends on the active FIFO mode. Bypass mode: FIFO is bypassed, report 0 as delay Mode1: nSample fill mode. In this mode I need to use two timestamp ts1: taken when the interrupt has been received ts2: taken before writing to nSample register. Interrupts are coming when DAC33 FIFO depth goes under alarm threshold. Phase1: when we received the alarm threshold, but our workqueue has not been executed (safeguard phase). Just count the played out samples since ts1 and subtract it from the alarm threshold value. Phase2: During nSample burst (after writing to nSample register), count the played out samples since ts1, count the samples received since ts2 (in a burst). Estimate the FIFO depth using these and alarm threshold value. Phase3: Draining phase (after the burst read), count the played out samples since ts1. Estimate the FIFO depth using the nSample configuration and the alarm threshold value. Mode7: Threshold based fill mode. In this mode one timestamp is enough. ts1: taken when the interrupt has been received Interrupts are coming when DAC33 FIFO depth reaches upper threshold. Phase1: Draining phase (after the burst), counting the played out samples since ts1, and subtract it from the upper threshold value. Phase2: During burst operation. Using the pre calculated time needed to play out samples from the buffer during the drain period (from upper to lower threshold), move the time window to cover the estimated time from the burst start to the current time. Calculate the samples played out since lower threshold and also the samples received during the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Peter Ujfalusi authored
When the DAC33 FIFO is in use the dai interface is running in much higher speed than the sampling frequency. Calculate the rate based on the internal base frequency and the bclk divider. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Peter Ujfalusi authored
Upper and Lower threshold values are used as magic numbers. Replace them with defines for later use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Peter Ujfalusi authored
There is no need for calculations for FIFO bypass mode. Just in case set the nsample maximum limit, which has been done in the calculation phase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Peter Ujfalusi authored
Alarm threshold interrupt is triggered right after the playback start. This interrupt is recieved during the first burst period, and caused the state machine to write additional nSample command, which has to be avoided. To fix this issue move the DAC33 interrupt unmasking after we configured the PREFILL register with a small delay. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 23 Apr, 2010 3 commits
-
-
Mark Brown authored
Follow the core jack implementation and allow reporting on the status of NULL jacks, avoiding the need to check in detection implementations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Barry Song authored
Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Barry Song authored
Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 21 Apr, 2010 1 commit
-
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 Apr, 2010 5 commits
-
-
Mark Brown authored
It's a little verbose during path changes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Use all the available Fratio values when configuring the WM8994 FLL, not just 0 and 3, following more complete characterisation of the device performance. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The WM8994 FLL can be clocked from one of four inputs, the two MCLKs and the LRCLK and BCLK of the AIF associated with the FLL. Allow all four inputs to be used rather than defaulting to MCLK1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Phil Carmody authored
An index equal to the array size may not be accessed. Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Takashi Iwai authored
Conversions to snd_soc_codec_{get|set}_drvdata() were missing in some files in the previous commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 17 Apr, 2010 2 commits
-
-
Mark Brown authored
One of the features of the multi CODEC work is that it embeds a struct device in the CODEC to provide diagnostics via a sysfs class rather than via the device tree, at which point it's much better to use the struct device private data rather than having two places to store it. Provide an accessor function to allow this change to be made more easily, and update all the CODEC drivers are updated. To ensure use of the accessor the private data structure member is renamed, meaning that if code developed with older an older core that still uses private_data is merged it will fail to build. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
-
- 15 Apr, 2010 2 commits
-
-
Sascha Hauer authored
Doing so causes a deadlock, so just signal the timer to stop using an atomic variable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Sascha Hauer authored
Currently the notification of elapsed periods is not very exact. Increase minimum periods to 4 as suggested by Liam Girdwood. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 Apr, 2010 2 commits
-
-
Marek Vasut authored
This patch adds support for sound through the WM8750 codec on Zipit Z2. Also, this patch incorporates support for detecting headset jack insertion through the jack detection API. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Bill Gatliff authored
Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 Apr, 2010 1 commit
-
-
Marek Vasut authored
Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code around. Hugely inspired by WM8753 which was already converted. Also, this patch fixes the Jive and Spitz machine. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 Apr, 2010 4 commits
-
-
Sascha Hauer authored
Using a regular timer results in poll times < 1 jiffie with small buffers, so we loaded the timer with the actual jiffie value. We can be more accurate using a hrtimer. Also, we have to call snd_pcm_period_elapsed after playing period_bytes and not runtime->period_size (which is in samples and not in bytes). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Sascha Hauer authored
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Sascha Hauer authored
When checking if we are DMA capable we have to check for the IMX_SSI_DMA flag which is already set from platform_data instead of setting it again when we want to do DMA. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@Slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Huang Weiyi authored
Remove unused #include <linux/version.h>('s) in sound/soc/codecs/wm2000.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 Apr, 2010 2 commits
-
-
Mark Brown authored
Conflicts due to context changes next to the backported DMA data change: include/sound/soc.h
-
Mark Brown authored
Support interrupt based microphone bias detection. The WM8994 has two microphone bias supplies, with detection supported on both. Detection using GPIOs together with the standard GPIO based jack framework is already supported via the platform data for the WM8994 core driver. Note that as well as the microphone bias itself the system clock and whichever AIF clock is supplying the system clock will need to be enabled for detection to function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-