- 21 Jul, 2014 4 commits
-
-
Zoltan Kiss authored
This patch makes this function aware that the first frag and the header might share the same ring slot. That could happen if the first slot is bigger than PKT_PROT_LEN. Due to this the error path might release that slot twice or never, depending on the error scenario. xenvif_idx_release is also removed from xenvif_idx_unmap, and called separately. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reported-by: Armin Zentai <armin.zentai@ezit.hu> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zoltan Kiss authored
When the grant operations failed, the skb is freed up eventually, and it tries to release the frags, if there is any. For the main skb nr_frags is set to 0 to avoid this, but on the frag_list it iterates through the frags array, and tries to call put_page on the page pointer which contains garbage at that time. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reported-by: Armin Zentai <armin.zentai@ezit.hu> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zoltan Kiss authored
The error handling for skb's with frag_list was completely wrong, it caused double unmap attempts to happen if the error was on the first skb. Move it to the right place in the loop. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Reported-by: Armin Zentai <armin.zentai@ezit.hu> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
When kernel generates a handle for a u32 filter, it tries to start from the max in the bucket. So when we have a filter with the max (fff) handle, it will cause kernel always generates the same handle for new filters. This can be shown by the following command: tc qdisc add dev eth0 ingress tc filter add dev eth0 parent ffff: protocol ip pref 770 handle 800::fff u32 match ip protocol 1 0xff tc filter add dev eth0 parent ffff: protocol ip pref 770 u32 match ip protocol 1 0xff ... we will get some u32 filters with same handle: # tc filter show dev eth0 parent ffff: filter protocol ip pref 770 u32 filter protocol ip pref 770 u32 fh 800: ht divisor 1 filter protocol ip pref 770 u32 fh 800::fff order 4095 key ht 800 bkt 0 match 00010000/00ff0000 at 8 filter protocol ip pref 770 u32 fh 800::fff order 4095 key ht 800 bkt 0 match 00010000/00ff0000 at 8 filter protocol ip pref 770 u32 fh 800::fff order 4095 key ht 800 bkt 0 match 00010000/00ff0000 at 8 filter protocol ip pref 770 u32 fh 800::fff order 4095 key ht 800 bkt 0 match 00010000/00ff0000 at 8 handles should be unique. This patch fixes it by looking up a bitmap, so that can guarantee the handle is as unique as possible. For compatibility, we still start from 0x800. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Jul, 2014 7 commits
-
-
Bjørn Mork authored
Huawei's usage of the subclass and protocol fields is not 100% clear to us, but there appears to be a very strict system. A device with the "shared" device ID 12d1:1506 and this NCM function was recently reported (showing only default altsetting): Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 3 bInterfaceProtocol 22 iInterface 8 CDC Network Control Model (NCM) ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 06 24 1a 00 01 1f ** UNRECOGNIZED: 0c 24 1b 00 01 00 04 10 14 dc 05 20 ** UNRECOGNIZED: 0d 24 0f 0a 0f 00 00 00 ea 05 03 00 01 ** UNRECOGNIZED: 05 24 06 01 01 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 9 Cc: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Add two device IDs found in an out-of-tree driver downloadable from Netgear. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
If "newmtu * 2 + 4" is too large then it can cause an integer overflow leading to memory corruption. Eric Dumazet suggests that 65534 is a reasonable upper limit. Btw, "newmtu" is not allowed to be a negative number because of the check in dev_set_mtu(), so that's ok. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Schulz authored
Commit 568f194e ("net: ppp: use sk_unattached_filter api") inadvertently changed the logic when setting PPP pass and active filters. This applies to both the generic PPP subsystem implemented by drivers/net/ppp/ppp_generic.c and the ISDN PPP subsystem implemented by drivers/isdn/i4l/isdn_ppp.c. The original code in ppp_ioctl() (or isdn_ppp_ioctl(), resp.) handling PPPIOCSPASS and PPPIOCSACTIVE allowed to remove a pass/active filter previously set by using a filter of length zero. However, with the new code this is not possible anymore as this case is not explicitly checked for, which leads to passing NULL as a filter to sk_unattached_filter_create(). This results in returning EINVAL to the caller. Additionally, the variables ppp->pass_filter and ppp->active_filter (or is->pass_filter and is->active_filter, resp.) are not reset to NULL, although the filters they point to may have been destroyed by sk_unattached_filter_destroy(), so in this EINVAL case dangling pointers are left behind (provided the pointers were previously non-NULL). This patch corrects both problems by checking whether the filter passed is empty or non-empty, and prevents sk_unattached_filter_create() from being called in the first case. Moreover, the pointers are always reset to NULL as soon as sk_unattached_filter_destroy() returns. Signed-off-by: Christoph Schulz <develop@kristov.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Fix a regression introduced by commit 35f6f453 ("net/mlx4_en: Don't use irq_affinity_notifier to track changes in IRQ affinity map"). When core is started in legacy EQ's (number of IRQ's < rx rings), cq->irq_desc was NULL. This caused a kernel crash under heavy traffic - when having more than rx NAPI budget completions. Fixed to have it set for both EQ modes. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
Nothing cleans up the objects created by vnet_new(), they are completely leaked. vnet_exit(), after doing the vio_unregister_driver() to clean up ports, should call a helper function that iterates over vnet_list and cleans up those objects. This includes unregister_netdevice() as well as free_netdev(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michel Dänzer authored
The ethernet port on my ASUS A88X Pro mainboard stopped working several times a day, with messages like these in dmesg: AMD-Vi: Event logged [IO_PAGE_FAULT device=05:00.0 domain=0x001e address=0x0000000000003000 flags=0x0050] Searching the web for these messages led me to similar reports about different hardware supported by r8169, and eventually to commits 3ced8c95 ('r8169: enforce RX_MULTI_EN for the 8168f.') and eb2dc35d ('r8169: RxConfig hack for the 8168evl'). So I tried this change, and it fixes the problem for me. Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Jul, 2014 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/nf_tables fixes The following patchset contains nf_tables fixes, they are: 1) Fix wrong transaction handling when the table flags are not modified. 2) Fix missing rcu read_lock section in the netlink dump path, which is not protected by the nfnl_lock. 3) Set NLM_F_DUMP_INTR in the netlink dump path to indicate interferences with updates. 4) Fix 64 bits chain counters when they are retrieved from a 32 bits arch, from Eric Dumazet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jerry Chu authored
Fixed a bug that was introduced by my GRE-GRO patch (bf5a755f net-gre-gro: Add GRE support to the GRO stack) that breaks the forwarding path because various GSO related fields were not set. The bug will cause on the egress path either the GSO code to fail, or a GRE-TSO capable (NETIF_F_GSO_GRE) NICs to choke. The following fix has been tested for both cases. Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: - Fix ELM suspend/resume - Reduce warnings if NAND ECC is too weak - Add CFI support for Sharp LH28F640BF NOR The last fix is coming in because other commits in the 3.16 cycle depended on this support. * tag 'for-linus-20140716' of git://git.infradead.org/linux-mtd: mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR mtd: nand: reduce the warning noise when the ECC is too weak mtd: devices: elm: fix elm_context_save() and elm_context_restore() functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "A cpufreq lockup fix and a compiler warning fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix compiler warnings x86, tsc: Fix cpufreq lockup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Tooling fixes and an Intel PMU driver fixlet" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Do not allow optimized switch for non-cloned events perf/x86/intel: ignore CondChgd bit to avoid false NMI handling perf symbols: Get kernel start address by symbol name perf tools: Fix segfault in cumulative.callchain report
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Things seem to calm down so far, just a small few HD-audio fixes (regression fixes and a new codec ID addition) popping up" * tag 'sound-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix broken PM due to incomplete i915 initialization ALSA: hda - Revert stream assignment order for Intel controllers ALSA: hda - Add new GPU codec ID 0x10de0070 to snd-hda ALSA: hda: Fix build warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull quota fix from Jan Kara: "Fix locking of dquot shrinker" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: missing lock in dqcache_shrink_scan()
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fix from Linus Walleij: "Fix up some merge confusion from the merge window" * tag 'gpio-v3.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mcp23s08: Eliminates redundant checking.
-
- 15 Jul, 2014 9 commits
-
-
Niu Yawei authored
Commit 1ab6c499 (fs: convert fs shrinkers to new scan/count API) accidentally removed locking from quota shrinker. Fix it - dqcache_shrink_scan() should use dq_list_lock to protect the scan on free_dquots list. CC: stable@vger.kernel.org Fixes: 1ab6c499Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fixes from Miklos Szeredi: "This contains miscellaneous fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: replace count*size kzalloc by kcalloc fuse: release temporary page if fuse_writepage_locked() failed fuse: restructure ->rename2() fuse: avoid scheduling while atomic fuse: handle large user and group ID fuse: inode: drop cast fuse: ignore entry-timeout on LOOKUP_REVAL fuse: timeout comparison fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Bluetooth pairing fixes from Johan Hedberg. 2) ieee80211_send_auth() doesn't allocate enough tail room for the SKB, from Max Stepanov. 3) New iwlwifi chip IDs, from Oren Givon. 4) bnx2x driver reads wrong PCI config space MSI register, from Yijing Wang. 5) IPV6 MLD Query validation isn't strong enough, from Hangbin Liu. 6) Fix double SKB free in openvswitch, from Andy Zhou. 7) Fix sk_dst_set() being racey with UDP sockets, leading to strange crashes, from Eric Dumazet. 8) Interpret the NAPI budget correctly in the new systemport driver, from Florian Fainelli. 9) VLAN code frees percpu stats in the wrong place, leading to crashes in the get stats handler. From Eric Dumazet. 10) TCP sockets doing a repair can crash with a divide by zero, because we invoke tcp_push() with an MSS value of zero. Just skip that part of the sendmsg paths in repair mode. From Christoph Paasch. 11) IRQ affinity bug fixes in mlx4 driver from Amir Vadai. 12) Don't ignore path MTU icmp messages with a zero mtu, machines out there still spit them out, and all of our per-protocol handlers for PMTU can cope with it just fine. From Edward Allcutt. 13) Some NETDEV_CHANGE notifier invocations were not passing in the correct kind of cookie as the argument, from Loic Prylli. 14) Fix crashes in long multicast/broadcast reassembly, from Jon Paul Maloy. 15) ip_tunnel_lookup() doesn't interpret wildcard keys correctly, fix from Dmitry Popov. 16) Fix skb->sk assigned without taking a reference to 'sk' in appletalk, from Andrey Utkin. 17) Fix some info leaks in ULP event signalling to userspace in SCTP, from Daniel Borkmann. 18) Fix deadlocks in HSO driver, from Olivier Sobrie. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits) hso: fix deadlock when receiving bursts of data hso: remove unused workqueue net: ppp: don't call sk_chk_filter twice mlx4: mark napi id for gro_skb bonding: fix ad_select module param check net: pppoe: use correct channel MTU when using Multilink PPP neigh: sysctl - simplify address calculation of gc_* variables net: sctp: fix information leaks in ulpevent layer MAINTAINERS: update r8169 maintainer net: bcmgenet: fix RGMII_MODE_EN bit tipc: clear 'next'-pointer of message fragments before reassembly r8152: fix r8152_csum_workaround function be2net: set EQ DB clear-intr bit in be_open() GRE: enable offloads for GRE farsync: fix invalid memory accesses in fst_add_one() and fst_init_card() igb: do a reset on SR-IOV re-init if device is down igb: Workaround for i210 Errata 25: Slow System Clock usbnet: smsc95xx: add reset_resume function with reset operation dp83640: Always decode received status frames r8169: disable L23 ...
-
Takashi Iwai authored
When the initialization of Intel HDMI controller fails due to missing i915 kernel symbols (e.g. HD-audio is built in while i915 is module), the driver discontinues the probe. However, since the probe was done asynchronously, the driver object still remains, thus the relevant PM ops are still called at suspend/resume. This results in the bad access to the incomplete audio card object, eventually leads to Oops or stall at PM. This patch adds the missing checks of chip->init_failed flag at each PM callback in order to fix the problem above. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79561 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Olivier Sobrie authored
When the module sends bursts of data, sometimes a deadlock happens in the hso driver when the tty buffer doesn't get the chance to be flushed quickly enough. Remove the endless while loop in function put_rxbuf_data() which is called by the urb completion handler. If there isn't enough room in the tty buffer, discards all the data received in the URB. Cc: David Miller <davem@davemloft.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Dan Williams <dcbw@redhat.com> Cc: Jan Dumon <j.dumon@option.com> Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Olivier Sobrie authored
The workqueue "retry_unthrottle_workqueue" is not scheduled anywhere in the code. So, remove it. Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394Linus Torvalds authored
Pull firewire fix from Stefan Richter: "The 1394 drivers cannot and are not supposed to be built on platforms which don't provide the DMA mapping API (regression since v3.16-rc1 with CONFIG_COMPILE_TEST=y on some architectures)" * tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: IEEE 1394 (FireWire) support should depend on HAS_DMA
-
git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds authored
Pull another aio fix from Ben LaHaise: "put_reqs_available() can now be called from within irq context, which means that it (and its sibling function get_reqs_available()) now need to be irq-safe, not just preempt-safe" * git://git.kvack.org/~bcrl/aio-fixes: aio: protect reqs_available updates from changes in interrupt handlers
-
Sasha Levin authored
The l2tp [get|set]sockopt() code has fallen back to the UDP functions for socket option levels != SOL_PPPOL2TP since day one, but that has never actually worked, since the l2tp socket isn't an inet socket. As David Miller points out: "If we wanted this to work, it'd have to look up the tunnel and then use tunnel->sk, but I wonder how useful that would be" Since this can never have worked so nobody could possibly have depended on that functionality, just remove the broken code and return -EINVAL. Reported-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: James Chapman <jchapman@katalix.com> Acked-by: David Miller <davem@davemloft.net> Cc: Phil Turnbull <phil.turnbull@oracle.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Willy Tarreau <w@1wt.eu> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 14 Jul, 2014 12 commits
-
-
Christoph Schulz authored
Commit 568f194e ("net: ppp: use sk_unattached_filter api") causes sk_chk_filter() to be called twice when setting a PPP pass or active filter. This applies to both the generic PPP subsystem implemented by drivers/net/ppp/ppp_generic.c and the ISDN PPP subsystem implemented by drivers/isdn/i4l/isdn_ppp.c. The first call is from within get_filter(). The second one is through the call chain ppp_ioctl() or isdn_ppp_ioctl() --> sk_unattached_filter_create() --> __sk_prepare_filter() --> sk_chk_filter() The first call from within get_filter() should be deleted as get_filter() is called just before calling sk_unattached_filter_create() later on, which eventually calls sk_chk_filter() anyway. For 3.15.x, this proposed change is a bugfix rather than a pure optimization as in that branch, sk_chk_filter() may replace filter codes by other codes which are not recognized when executing sk_chk_filter() a second time. So with 3.15.x, if sk_chk_filter() is called twice, the second invocation may yield EINVAL (this depends on the filter codes found in the filter to be set, but because the replacement is done for frequently used codes, this is almost always the case). The net effect is that setting pass and/or active PPP filters does not work anymore, since sk_unattached_filter_create() always returns EINVAL due to the second call to sk_chk_filter(), regardless whether the filter was originally sane or not. Signed-off-by: Christoph Schulz <develop@kristov.de> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Napi id was not marked for gro_skb, this will lead rx busy loop won't work correctly since they stack never try to call low latency receive method because of a zero socket napi id. Fix this by marking napi id for gro_skb. The transaction rate of 1 byte netperf tcp_rr gets about 50% increased (from 20531.68 to 30610.88). Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Obvious copy/paste error when I converted the ad_select to the new option API. "lacp_rate" there should be "ad_select" so we can get the proper value. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> Fixes: 9e5f5eeb ("bonding: convert ad_select to use the new option API") Reported-by: Karim Scheik <karim.scheik@prisma-solutions.at> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Schulz authored
The PPP channel MTU is used with Multilink PPP when ppp_mp_explode() (see ppp_generic module) tries to determine how big a fragment might be. According to RFC 1661, the MTU excludes the 2-byte PPP protocol field, see the corresponding comment and code in ppp_mp_explode(): /* * hdrlen includes the 2-byte PPP protocol field, but the * MTU counts only the payload excluding the protocol field. * (RFC1661 Section 2) */ mtu = pch->chan->mtu - (hdrlen - 2); However, the pppoe module *does* include the PPP protocol field in the channel MTU, which is wrong as it causes the PPP payload to be 1-2 bytes too big under certain circumstances (one byte if PPP protocol compression is used, two otherwise), causing the generated Ethernet packets to be dropped. So the pppoe module has to subtract two bytes from the channel MTU. This error only manifests itself when using Multilink PPP, as otherwise the channel MTU is not used anywhere. In the following, I will describe how to reproduce this bug. We configure two pppd instances for multilink PPP over two PPPoE links, say eth2 and eth3, with a MTU of 1492 bytes for each link and a MRRU of 2976 bytes. (This MRRU is computed by adding the two link MTUs and subtracting the MP header twice, which is 4 bytes long.) The necessary pppd statements on both sides are "multilink mtu 1492 mru 1492 mrru 2976". On the client side, we additionally need "plugin rp-pppoe.so eth2" and "plugin rp-pppoe.so eth3", respectively; on the server side, we additionally need to start two pppoe-server instances to be able to establish two PPPoE sessions, one over eth2 and one over eth3. We set the MTU of the PPP network interface to the MRRU (2976) on both sides of the connection in order to make use of the higher bandwidth. (If we didn't do that, IP fragmentation would kick in, which we want to avoid.) Now we send a ICMPv4 echo request with a payload of 2948 bytes from client to server over the PPP link. This results in the following network packet: 2948 (echo payload) + 8 (ICMPv4 header) + 20 (IPv4 header) --------------------- 2976 (PPP payload) These 2976 bytes do not exceed the MTU of the PPP network interface, so the IP packet is not fragmented. Now the multilink PPP code in ppp_mp_explode() prepends one protocol byte (0x21 for IPv4), making the packet one byte bigger than the negotiated MRRU. So this packet would have to be divided in three fragments. But this does not happen as each link MTU is assumed to be two bytes larger. So this packet is diveded into two fragments only, one of size 1489 and one of size 1488. Now we have for that bigger fragment: 1489 (PPP payload) + 4 (MP header) + 2 (PPP protocol field for the MP payload (0x3d)) + 6 (PPPoE header) -------------------------- 1501 (Ethernet payload) This packet exceeds the link MTU and is discarded. If one configures the link MTU on the client side to 1501, one can see the discarded Ethernet frames with tcpdump running on the client. A ping -s 2948 -c 1 192.168.15.254 leads to the smaller fragment that is correctly received on the server side: (tcpdump -vvvne -i eth3 pppoes and ppp proto 0x3d) 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x3] MLPPP (0x003d), length 1494: seq 0x000, Flags [end], length 1492 and to the bigger fragment that is not received on the server side: (tcpdump -vvvne -i eth2 pppoes and ppp proto 0x3d) 52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864), length 1515: PPPoE [ses 0x5] MLPPP (0x003d), length 1495: seq 0x000, Flags [begin], length 1493 With the patch below, we correctly obtain three fragments: 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000, Flags [begin], length 1492 52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000, Flags [none], length 1492 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 27: PPPoE [ses 0x1] MLPPP (0x003d), length 7: seq 0x000, Flags [end], length 5 And the ICMPv4 echo request is successfully received at the server side: IP (tos 0x0, ttl 64, id 21925, offset 0, flags [DF], proto ICMP (1), length 2976) 192.168.222.2 > 192.168.15.254: ICMP echo request, id 30530, seq 0, length 2956 The bug was introduced in commit c9aa6895 ("[PPPOE]: Advertise PPPoE MTU") from the very beginning. This patch applies to 3.10 upwards but the fix can be applied (with minor modifications) to kernels as old as 2.6.32. Signed-off-by: Christoph Schulz <develop@kristov.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mathias Krause authored
The code in neigh_sysctl_register() relies on a specific layout of struct neigh_table, namely that the 'gc_*' variables are directly following the 'parms' member in a specific order. The code, though, expresses this in the most ugly way. Get rid of the ugly casts and use the 'tbl' pointer to get a handle to the table. This way we can refer to the 'gc_*' variables directly. Similarly seen in the grsecurity patch, written by Brad Spengler. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
While working on some other SCTP code, I noticed that some structures shared with user space are leaking uninitialized stack or heap buffer. In particular, struct sctp_sndrcvinfo has a 2 bytes hole between .sinfo_flags and .sinfo_ppid that remains unfilled by us in sctp_ulpevent_read_sndrcvinfo() when putting this into cmsg. But also struct sctp_remote_error contains a 2 bytes hole that we don't fill but place into a skb through skb_copy_expand() via sctp_ulpevent_make_remote_error(). Both structures are defined by the IETF in RFC6458: * Section 5.3.2. SCTP Header Information Structure: The sctp_sndrcvinfo structure is defined below: struct sctp_sndrcvinfo { uint16_t sinfo_stream; uint16_t sinfo_ssn; uint16_t sinfo_flags; <-- 2 bytes hole --> uint32_t sinfo_ppid; uint32_t sinfo_context; uint32_t sinfo_timetolive; uint32_t sinfo_tsn; uint32_t sinfo_cumtsn; sctp_assoc_t sinfo_assoc_id; }; * 6.1.3. SCTP_REMOTE_ERROR: A remote peer may send an Operation Error message to its peer. This message indicates a variety of error conditions on an association. The entire ERROR chunk as it appears on the wire is included in an SCTP_REMOTE_ERROR event. Please refer to the SCTP specification [RFC4960] and any extensions for a list of possible error formats. An SCTP error notification has the following format: struct sctp_remote_error { uint16_t sre_type; uint16_t sre_flags; uint32_t sre_length; uint16_t sre_error; <-- 2 bytes hole --> sctp_assoc_t sre_assoc_id; uint8_t sre_data[]; }; Fix this by setting both to 0 before filling them out. We also have other structures shared between user and kernel space in SCTP that contains holes (e.g. struct sctp_paddrthlds), but we copy that buffer over from user space first and thus don't need to care about it in that cases. While at it, we can also remove lengthy comments copied from the draft, instead, we update the comment with the correct RFC number where one can look it up. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Benjamin LaHaise authored
As of commit f8567a38 it is now possible to have put_reqs_available() called from irq context. While put_reqs_available() is per cpu, it did not protect itself from interrupts on the same CPU. This lead to aio_complete() corrupting the available io requests count when run under a heavy O_DIRECT workloads as reported by Robert Elliott. Fix this by disabling irq updates around the per cpu batch updates of reqs_available. Many thanks to Robert and folks for testing and tracking this down. Reported-by: Robert Elliot <Elliott@hp.com> Tested-by: Robert Elliot <Elliott@hp.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Cc: Jens Axboe <axboe@kernel.dk>, Christoph Hellwig <hch@infradead.org> Cc: stable@vger.kenel.org
-
Fabian Frederick authored
kcalloc manages count*sizeof overflow. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
-
Maxim Patlasov authored
tmp_page to be freed if fuse_write_file_get() returns NULL. Signed-off-by: Maxim Patlasov <mpatlasov@parallels.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
-
Eric Dumazet authored
Use generic u64_stats_sync infrastructure to get proper 64bit stats, even on 32bit arches, at no extra cost for 64bit arches. Without this fix, 32bit arches can have some wrong counters at the time the carry is propagated into upper word. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
An updater may interfer with the dumping of any of the object lists. Fix this by using a per-net generation counter and use the nl_dump_check_consistent() interface so the NLM_F_DUMP_INTR flag is set to notify userspace that it has to restart the dump since an updater has interfered. This patch also replaces the existing consistency checking code in the rule dumping path since it is broken. Basically, the value that the dump callback returns is not propagated to userspace via netlink_dump_start(). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
The dump operation through netlink is not protected by the nfnl_lock. Thus, a reader process can be dumping any of the existing object lists while another process can be updating the list content. This patch resolves this situation by protecting all the object lists with RCU in the netlink dump path which is the reader side. The updater path is already protected via nfnl_lock, so use list manipulation RCU-safe operations. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-