The header file is the only thing preventing us from building the
driver in a cross-platform configuration, so move the structure
we are interested in to the global platform_data location
and enable compile testing.
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v5.2/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/soc

This update for DaVinci SoC support simplifies the VBUS enable
and overcurrent handling code in DA8XX OHCI driver by modeling
vbus GPIO as a regulator. This unifies code for all users, device
tree and non-device-tree.

The OHCI driver patches have been acked by its maintainer.

* tag 'davinci-for-v5.2/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  usb: ohci-da8xx: drop the vbus GPIO
  ARM: davinci: da830-evm: add a fixed regulator for ohci-da8xx
  ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx
  usb: ohci-da8xx: disable the regulator if the overcurrent irq fired
  usb: ohci-da8xx: let the regulator framework keep track of use count
  ARM: davinci: add missing sentinels to GPIO lookup tables
Signed-off-by: Olof Johansson <olof@lixom.net>

This is the pxa changes for 5.2 cycle :
 - only a little fix the PXA SSP removal path

* tag 'pxa-for-5.2' of https://github.com/rjarzmik/linux:
  ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data"
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-soc-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung mach/soc changes for v5.2

1. Cleanup in mach code.
2. Add necessary fixes for Suspend to RAM on Exynos5422 boards (tested
   with Odroid XU3/XU4/HC1 family).  Finally this brings a working S2R
   on these Odroid boards (still other drivers might have some issues
   but mach code seems to be finished).
3. Require MCPM for Exynos542x boards because otherwise not all of cores
   will come online.
4. GPIO regulator cleanup on S3C6410 Craig.

* tag 'samsung-soc-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c64xx: Tidy up handling of regulator GPIO lookups
  ARM: exynos: Set MCPM as mandatory for Exynos542x/5800 SoCs
  ARM: exynos: Fix infinite loops on CPU powerup failure
  ARM: exynos: Fix a leaked reference by adding missing of_node_put
  ARM: exynos: Fix undefined instruction during Exynos5422 resume
  ARM: exynos: Add CPU state management for Exynos542x under secure firmware
  ARM: exynos: Add Exynos SMC values for secure memory write
  ARM: exynos: Move Exynos542x CPU state reset to pm_prepare()
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.2/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

Driver changes for ti-sysc for v5.2 merge window

This series of changes for ti-sysc interconnect target module driver
gets us to the point where we can actually drop legacy platform data
for many devices in favor of device tree data.

To do this, we improve ti-sysc driver not to rely on platform data
callbacks to manage module clocks, and handle more quirks needed for
some devices. Also few minor fixes are needed, but were considered
not needed to be sent separately as they only show up with this series.

Then we drop several thousands of lines of legacy platform data for
omap4, omap5, dra7, am335x and am437x. We drop platform data for mmc,
i2c, gpio and uart devices to start with as those are typically
easily tested on all devices. In case of unexpected issues, we can just
add back the legacy platform data for a single device type if needed.

Finally we add initial support for enabling and disabling some devices
without legacy platform data callbacks. I was planning on sending the
dropping of legacy platform data as a separate series, but already
applied Roger's patch on top and pushed it out.

Note that this series depends on related SoC and is based on those.

* tag 'omap-for-v5.2/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (33 commits)
  bus: ti-sysc: Add generic enable/disable functions
  ARM: OMAP2+: Drop mcspi platform data for omap4
  ARM: OMAP2+: Drop uart platform data for dra7
  ARM: OMAP2+: Drop gpio platform data for dra7
  ARM: OMAP2+: Drop i2c platform data for dra7
  ARM: OMAP2+: Drop mmc platform data for dra7
  ARM: OMAP2+: Drop uart platform data for omap5
  ARM: OMAP2+: Drop gpio platform data for omap5
  ARM: OMAP2+: Drop i2c platform data for omap5
  ARM: OMAP2+: Drop mmc platform data for omap5
  ARM: OMAP2+: Drop uart platform data for am33xx and am43xx
  ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx
  ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx
  ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  ARM: OMAP2+: Drop uart platform data for omap4
  ARM: OMAP2+: Drop gpio platform data for omap4
  ARM: OMAP2+: Drop i2c platform data for omap4
  ARM: OMAP2+: Drop mmc platform data for omap4
  Documentation: bus: ti-sysc: fix spelling mistakes "multipe" and "interconnet"
  bus: ti-sysc: Detect DMIC for debugging
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.2/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

SoC changes for omap variants for v5.2 merge window

This series of changes mostly consists of ti-sysc interconnect driver
related preparation work. With these changes and the related ti-sysc
driver changes, we can start dropping legacy omap_hwmod_*data.c platform
data for many devices.

There are also two am335x and am437x related PM changes for secure
devices that have ROM handling some parts and needs EFUSE power domain
active.

* tag 'omap-for-v5.2/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: pm33xx-core: Do not Turn OFF CEFUSE as PPA may be using it
  ARM: OMAP2+: Wakeupgen: AM43xx HS devices should save context like non-HS
  ARM: OMAP2+: Handle reset quirks for dynamically allocated modules
  ARM: OMAP2+: Remove hwmod .rev data and use local SoC checks instead
  ARM: OMAP2+: Allocate struct omap_hwmod based on dts data
  ARM: OMAP2+: Define _HWMOD_STATE_DEFAULT and use it
  ARM: OMAP2+: Prepare class allocation for dynamically allocated modules
  ARM: OMAP2+: Make interconnect target module allocation functions static
  ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset()
  ARM: dts: Fix dcan clkctrl clock for am3
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch enables AMBA support for stm32 family.
stm32 family embeds different amba pl180 variants.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Since commit 1c459de1 ("ARM: pxa: ssp: use devm_ functions")
kfree, iounmap, clk_put etc are not needed anymore in remove path.

Fixes: 1c459de1 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[ commit message spelling fix ]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Rather than unconditionally registering the GPIO lookup table only do so
for devices that require it.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
[Fixed up to also handle wm5102 and wm5102 reva]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

All users now setup a fixed regulator for the vbus supply. We can drop
the vbus GPIO code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Instead of directly using the vbus GPIO we should model it as a fixed
regulator. Add all necessary fix-ups for the regulator to be registered
and configure the vbus GPIO as its enable pin.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Instead of directly using the vbus GPIO we should model it as a fixed
regulator. Add all necessary fix-ups for the regulator to be registered
and configure the vbus GPIO as its enable pin.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Historically the power supply management in this driver has been handled
in two separate places in parallel. Device-tree users simply defined an
appropriate regulator, while two boards with no DT support (da830-evm and
omapl138-hawk) passed functions defined in their respective board files
over platform data. These functions simply used legacy GPIO calls to
watch the oc GPIO for interrupts and disable the vbus GPIO when the irq
fires.

Commit d193abf1 ("usb: ohci-da8xx: add vbus and overcurrent gpios")
updated these GPIO calls to the modern API and moved them inside the
driver.

This however is not the optimal solution for the vbus GPIO which should
be modeled as a fixed regulator that can be controlled with a GPIO.

In order to keep the overcurrent protection available once we move the
board files to using fixed regulators we need to disable the enable_reg
regulator when the overcurrent indicator interrupt fires. Since we
cannot call regulator_disable() from interrupt context, we need to
switch to using a oneshot threaded interrupt.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

There's no reason to have a separate variable to keep track of the
regulator state. The regulator core already does that. Remove
reg_enabled from struct da8xx_ohci_hcd.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Some GPIO lookup tables defined in davinci board files are missing
array sentinels. If an entry for given device cannot be found, this
will cause a kernel panic.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Support for Exynos5420/5422/5800 SoCs requires MCPM to properly boot all
CPU cores on all currectly supported platforms: Peach Pit (Exynos5420),
Odroid XU3/XU3lite/XU4/HC1 (Exynos5422) and Peach Pi (Exynos5800).
Without it some CPU cores fail to come online. Remove then the ability to
disable MCPM and make it mandatory when Exynos542x/5800 support is
enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

For non legacy cases, add generic sysc_enable_module()
and sysc_disable_module() functions.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This area is used to store keys by HSPPA in case of AM438x SOC. Leave it
active.
Signed-off-by: Kabir Sahane <x0153567@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Unlike some previous generation devices, AM43xx HS IRQ and Wakegen
context is handled by the ROM for us, and no secure service call
is needed or supported. Non-GP AM43xx devices should take the
same path as GP.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add timeout to infinite loops during the CPU powerup procedures. It
is better to report an error instead of busylooping for infinite time
in case of failure.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can now drop legacy platform data one interconnect target module at
a time in favor of the device tree based data that has been added earlier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

There is are a couple of spelling mistakes in the Documentation. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Detect DMIC to see what we have connected if config DEBUG is enabled.
Signed-off-by: Tony Lindgren <tony@atomide.com>

In preparation of dropping interconnect target module platform data in
favor of devicetree based data, we must pass swsup idle quirks to the
platform data functions.

For now, let's only tag the UART modules with the SWSUP_SIDLE_ACT quirk.
The other modules will get tagged with swsup quirks as we drop the
platform data and test the changes.
Signed-off-by: Tony Lindgren <tony@atomide.com>