- 06 Nov, 2019 29 commits
-
-
Abhishek Ambure authored
[ Upstream commit 7ba31e6e ] Hostapd uses CCMP, GCMP & GCMP-256 as 'wpa_pairwise' option to run WPA3. In WCN3990 firmware cipher suite numbers 9 to 11 are for CCMP, GCMP & GCMP-256. To enable CCMP, GCMP & GCMP-256 cipher suites in WCN3990 firmware, host sets 'n_cipher_suites = 11' while initializing hardware parameters. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by:
Abhishek Ambure <aambure@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ville Syrjälä authored
[ Upstream commit 6a310618 ] We lose even config space access when we power gate the ISP via the PUNIT. That makes lspci & co. produce gibberish. To fix that let's try to implement actual runtime pm hooks and inform the pci core that the device always goes to D3cold. That will cause the pci core to resume the device before attempting config space access. This introduces another annoyance though. We get the following error every time we try to resume the device: intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3 The reason being that the pci core tries to put the device back into D0 via the standard PCI PM mechanism before calling the driver resume hook. To fix this properly we'd need to infiltrate the platform pm hooks (could turn ugly real fast), or use pm domains (which don't seem to exist on x86), or some extra early resume hook for the driver (which doesn't exist either). So maybe we just choose to live with the error? Cc: Hans de Goede <hdegoede@redhat.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 8a7d7141 ] If the ISP is exposed as a PCI device VLV machines need the same treatment as CHV machines to power gate the ISP. Otherwise s0ix will not work. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit f8f80744 ] The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not supply descriptors, add this to the DMI descriptor override list, fixing the touchpad not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1526312Reported-by:
Rene Wagner <redhatbugzilla@callerid.de> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 1475af25 ] While using Elan touchpads, the message floods: [ 136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535) Though the message flood is annoying, the device it self works without any issue. I suspect that the device in question takes too much time to pull the IRQ back to high after I2C host has done reading its data. Since the host receives all useful data, let's ignore the input report when there's no data. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 86c31524 ] LG touchscreen (1fd2:8001) stops working after reboot: [ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device. The device in question stops working after receives SLEEP, ON, SLEEP commands in a short period. The scenario is like this: - Once the desktop session closes, it also closed the hid device, so the device gets runtime suspended and receives a SLEEP command. - Before calling shutdown callback, it gets runtime resumed and received an ON command. - In the shutdown callback, it receives another SLEEP command. I failed to find a reliable interval between ON/SLEEP commands that can make it work, so let's simply disable runtime PM for the device. Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 29edbc3e ] Set types bitmap:ipmac and hash:ipmac check that MAC addresses are not all zeroes. Introduce one missing check, and make the remaining ones consistent, using is_zero_ether_addr() instead of comparing against an array containing zeroes. This was already done for hash:mac sets in commit 26c97c5d ("netfilter: ipset: Use is_zero_ether_addr instead of static and memcmp"). Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit 4222ea71 ] When we are writing out a free space cache, during the transaction commit phase, we can end up in a deadlock which results in a stack trace like the following: schedule+0x28/0x80 btrfs_tree_read_lock+0x8e/0x120 [btrfs] ? finish_wait+0x80/0x80 btrfs_read_lock_root_node+0x2f/0x40 [btrfs] btrfs_search_slot+0xf6/0x9f0 [btrfs] ? evict_refill_and_join+0xd0/0xd0 [btrfs] ? inode_insert5+0x119/0x190 btrfs_lookup_inode+0x3a/0xc0 [btrfs] ? kmem_cache_alloc+0x166/0x1d0 btrfs_iget+0x113/0x690 [btrfs] __lookup_free_space_inode+0xd8/0x150 [btrfs] lookup_free_space_inode+0x5b/0xb0 [btrfs] load_free_space_cache+0x7c/0x170 [btrfs] ? cache_block_group+0x72/0x3b0 [btrfs] cache_block_group+0x1b3/0x3b0 [btrfs] ? finish_wait+0x80/0x80 find_free_extent+0x799/0x1010 [btrfs] btrfs_reserve_extent+0x9b/0x180 [btrfs] btrfs_alloc_tree_block+0x1b3/0x4f0 [btrfs] __btrfs_cow_block+0x11d/0x500 [btrfs] btrfs_cow_block+0xdc/0x180 [btrfs] btrfs_search_slot+0x3bd/0x9f0 [btrfs] btrfs_lookup_inode+0x3a/0xc0 [btrfs] ? kmem_cache_alloc+0x166/0x1d0 btrfs_update_inode_item+0x46/0x100 [btrfs] cache_save_setup+0xe4/0x3a0 [btrfs] btrfs_start_dirty_block_groups+0x1be/0x480 [btrfs] btrfs_commit_transaction+0xcb/0x8b0 [btrfs] At cache_save_setup() we need to update the inode item of a block group's cache which is located in the tree root (fs_info->tree_root), which means that it may result in COWing a leaf from that tree. If that happens we need to find a free metadata extent and while looking for one, if we find a block group which was not cached yet we attempt to load its cache by calling cache_block_group(). However this function will try to load the inode of the free space cache, which requires finding the matching inode item in the tree root - if that inode item is located in the same leaf as the inode item of the space cache we are updating at cache_save_setup(), we end up in a deadlock, since we try to obtain a read lock on the same extent buffer that we previously write locked. So fix this by using the tree root's commit root when searching for a block group's free space cache inode item when we are attempting to load a free space cache. This is safe since block groups once loaded stay in memory forever, as well as their caches, so after they are first loaded we will never need to read their inode items again. For new block groups, once they are created they get their ->cached field set to BTRFS_CACHE_FINISHED meaning we will not need to read their inode item. Reported-by:
Andrew Nelson <andrew.s.nelson@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAPTELenq9x5KOWuQ+fa7h1r3nsJG8vyiTH8+ifjURc_duHh2Wg@mail.gmail.com/ Fixes: 9d66e233 ("Btrfs: load free space cache if it exists") Tested-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Logan Gunthorpe authored
[ Upstream commit 742bbe1e ] Currently the Switchtec quirk runs on all endpoints in the switch, including all the upstream and downstream ports. These other functions do not contain BARs, so the quirk fails when trying to map the BAR and prints the error "Cannot iomap Switchtec device". The user will see a few of these useless and scary errors, one for each port in the switch. At most, the quirk should only run on either a management endpoint (PCI_CLASS_MEMORY_OTHER) or an NTB endpoint (PCI_CLASS_BRIDGE_OTHER). However, the quirk is useless except in NTB applications, so we will only run it when the class is PCI_CLASS_BRIDGE_OTHER. Switch to using DECLARE_PCI_FIXUP_CLASS_FINAL and only match PCI_CLASS_BRIDGE_OTHER. Reported-by:
Stephen Bates <sbates@raithlin.com> Fixes: ad281ecf ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB") Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> [bhelgaas: split SWITCHTEC_QUIRK() introduction to separate patch] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Doug Meyer <dmeyer@gigaio.com> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Signed-off-by:
-
Coly Li authored
[ Upstream commit dab71b2d ] dc->writeback_rate_minimum is type unsigned integer variable, it is set via sysfs interface, and converte from input string to unsigned integer by d_strtoul_nonzero(). When the converted input value is larger than UINT_MAX, overflow to unsigned integer happens. This patch fixes the overflow by using sysfs_strotoul_clamp() to convert input string and limit the value in range [1, UINT_MAX], then the overflow can be avoided. Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jeykumar Sankaran authored
[ Upstream commit a802ee99 ] Bail out KMS hw init on display initialization failures with proper error logging. changes in v3: - introduced in the series changes in v4: - avoid duplicate return on errors (Sean Paul) - avoid spamming errors on failures (Jordon Crouse) Signed-off-by:
Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Kan Liang authored
[ Upstream commit 00ae831d ] Add the Atom Tremont model number to the Intel family list. [ Tony: Also update comment at head of file to say "_X" suffix is also used for microserver parts. ] Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Megha Dey <megha.dey@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190125195902.17109-4-tony.luck@intel.comSigned-off-by:
-
Len Brown authored
[ Upstream commit 445640a5 ] When the C-state limit is 8 on Goldmont, PC10 is enabled. Previously turbostat saw this as "undefined", and thus assumed it should not show some counters, such as pc3, pc6, pc7. Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Fabrice Gasnier authored
[ Upstream commit cd7cd0e6 ] When using external vbus supply regulator, it should be enabled synchronously with PWR bit in HPRT register. This also fixes unbalanced use of this optional regulator (This can be reproduced easily when unbinding the driver). Fixes: 531ef5eb ("usb: dwc2: add support for host mode external vbus supply") Tested-by:
Artur Petrosyan <arturp@synopsys.com> Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Julian Sax authored
[ Upstream commit 399474e4 ] This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Reported-by:
Tim Aldridge <taldridge@mac.com> Signed-off-by:
Julian Sax <jsbc@gmx.de> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 0c093b59 ] Testcase to reproduce this bug: 1. mkfs.f2fs /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr +a /mnt/f2fs/file 6. xfs_io -a /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. xfs_io /mnt/f2fs/file There is no error when opening this file w/o O_APPEND, but actually, we expect the correct result should be: /mnt/f2fs/file: Operation not permitted The root cause is, in recover_inode(), we recover inode->i_flags more than F2FS_I(inode)->i_flags, so fix it. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 7de36cf3 ] inode.i_gc_failures is used to indicate that skip count of migrating on blocks of inode, we should guarantee it can be recovered in sudden power-off case. Signed-off-by:
-
David Hildenbrand authored
[ Upstream commit 56668487 ] Let's perform all checking + offlining + removing under device_hotplug_lock, so nobody can mess with these devices via sysfs concurrently. [david@redhat.com: take device_hotplug_lock outside of loop] Link: http://lkml.kernel.org/r/20180927092554.13567-6-david@redhat.com Link: http://lkml.kernel.org/r/20180925091457.28651-6-david@redhat.comSigned-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by:
Rashmica Gupta <rashmica.g@gmail.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Len Brown <lenb@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Phil Elwell authored
[ Upstream commit 30ec514d ] The SC16IS752 has an Enhanced Feature Register which is aliased at the same address as the Interrupt Identification Register; accessing it requires that a magic value is written to the Line Configuration Register. If an interrupt is raised while the EFR is mapped in then the ISR won't be able to access the IIR, leading to the "Unexpected interrupt" error messages. Avoid the problem by claiming a mutex around accesses to the EFR register, also claiming the mutex in the interrupt handler work item (this is equivalent to disabling interrupts to interlock against a non-threaded interrupt handler). See: https://github.com/raspberrypi/linux/issues/2529Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
James Smart authored
[ Upstream commit 2c4c9141 ] Renumber one of the 0711 log messages so there isn't a duplication. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Jaegeuk Kim authored
[ Upstream commit 0e0667b6 ] After quota_off, we'll get some dirty blocks. If put_super don't have a chance to flush them by checkpoint, it causes NULL pointer exception in end_io after iput(node_inode). (e.g., by checkpoint=disable) Reviewed-by:
-
Ahmad Masri authored
[ Upstream commit 6470f319 ] After being associated with some EDMA rx traffic, upon "down" driver doesn't free all skbs in the rx ring. Modify wil_move_all_rx_buff_to_free_list to loop on active list of rx buffers, unmap the physical memory and free the skb. Signed-off-by:
Ahmad Masri <amasri@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit fd2b007e ] [BUG] For btrfs:qgroup_meta_reserve event, the trace event can output garbage: qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=DATA diff=2 The diff should always be alinged to sector size (4k), so there is definitely something wrong. [CAUSE] For the wrong @diff, it's caused by wrong parameter order. The correct parameters are: struct btrfs_root, s64 diff, int type. However the parameters used are: struct btrfs_root, int type, s64 diff. Fixes: 4ee0d883 ("btrfs: qgroup: Update trace events for metadata reservation") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
[ Upstream commit 8702ba93 ] [Background] Btrfs qgroup uses two types of reserved space for METADATA space, PERTRANS and PREALLOC. PERTRANS is metadata space reserved for each transaction started by btrfs_start_transaction(). While PREALLOC is for delalloc, where we reserve space before joining a transaction, and finally it will be converted to PERTRANS after the writeback is done. [Inconsistency] However there is inconsistency in how we handle PREALLOC metadata space. The most obvious one is: In btrfs_buffered_write(): btrfs_delalloc_release_extents(BTRFS_I(inode), reserve_bytes, true); We always free qgroup PREALLOC meta space. While in btrfs_truncate_block(): btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, (ret != 0)); We only free qgroup PREALLOC meta space when something went wrong. [The Correct Behavior] The correct behavior should be the one in btrfs_buffered_write(), we should always free PREALLOC metadata space. The reason is, the btrfs_delalloc_* mechanism works by: - Reserve metadata first, even it's not necessary In btrfs_delalloc_reserve_metadata() - Free the unused metadata space Normally in: btrfs_delalloc_release_extents() |- btrfs_inode_rsv_release() Here we do calculation on whether we should release or not. E.g. for 64K buffered write, the metadata rsv works like: /* The first page */ reserve_meta: num_bytes=calc_inode_reservations() free_meta: num_bytes=0 total: num_bytes=calc_inode_reservations() /* The first page caused one outstanding extent, thus needs metadata rsv */ /* The 2nd page */ reserve_meta: num_bytes=calc_inode_reservations() free_meta: num_bytes=calc_inode_reservations() total: not changed /* The 2nd page doesn't cause new outstanding extent, needs no new meta rsv, so we free what we have reserved */ /* The 3rd~16th pages */ reserve_meta: num_bytes=calc_inode_reservations() free_meta: num_bytes=calc_inode_reservations() total: not changed (still space for one outstanding extent) This means, if btrfs_delalloc_release_extents() determines to free some space, then those space should be freed NOW. So for qgroup, we should call btrfs_qgroup_free_meta_prealloc() other than btrfs_qgroup_convert_reserved_meta(). The good news is: - The callers are not that hot The hottest caller is in btrfs_buffered_write(), which is already fixed by commit 336a8bb8 ("btrfs: Fix wrong btrfs_delalloc_release_extents parameter"). Thus it's not that easy to cause false EDQUOT. - The trans commit in advance for qgroup would hide the bug Since commit f5fef459 ("btrfs: qgroup: Make qgroup async transaction commit more aggressive"), when btrfs qgroup metadata free space is slow, it will try to commit transaction and free the wrongly converted PERTRANS space, so it's not that easy to hit such bug. [FIX] So to fix the problem, remove the @qgroup_free parameter for btrfs_delalloc_release_extents(), and always pass true to btrfs_inode_rsv_release(). Reported-by:
-
Filipe Manana authored
[ Upstream commit c67d970f ] When we have a buffered write that starts at an offset greater than or equals to the file's size happening concurrently with a full ranged fiemap, we can end up leaking an extent state structure. Suppose we have a file with a size of 1Mb, and before the buffered write and fiemap are performed, it has a single extent state in its io tree representing the range from 0 to 1Mb, with the EXTENT_DELALLOC bit set. The following sequence diagram shows how the memory leak happens if a fiemap a buffered write, starting at offset 1Mb and with a length of 4Kb, are performed concurrently. CPU 1 CPU 2 extent_fiemap() --> it's a full ranged fiemap range from 0 to LLONG_MAX - 1 (9223372036854775807) --> locks range in the inode's io tree --> after this we have 2 extent states in the io tree: --> 1 for range [0, 1Mb[ with the bits EXTENT_LOCKED and EXTENT_DELALLOC_BITS set --> 1 for the range [1Mb, LLONG_MAX[ with the EXTENT_LOCKED bit set --> start buffered write at offset 1Mb with a length of 4Kb btrfs_file_write_iter() btrfs_buffered_write() --> cached_state is NULL lock_and_cleanup_extent_if_need() --> returns 0 and does not lock range because it starts at current i_size / eof --> cached_state remains NULL btrfs_dirty_pages() btrfs_set_extent_delalloc() (...) __set_extent_bit() --> splits extent state for range [1Mb, LLONG_MAX[ and now we have 2 extent states: --> one for the range [1Mb, 1Mb + 4Kb[ with EXTENT_LOCKED set --> another one for the range [1Mb + 4Kb, LLONG_MAX[ with EXTENT_LOCKED set as well --> sets EXTENT_DELALLOC on the extent state for the range [1Mb, 1Mb + 4Kb[ --> caches extent state [1Mb, 1Mb + 4Kb[ into @cached_state because it has the bit EXTENT_LOCKED set --> btrfs_buffered_write() ends up with a non-NULL cached_state and never calls anything to release its reference on it, resulting in a memory leak Fix this by calling free_extent_state() on cached_state if the range was not locked by lock_and_cleanup_extent_if_need(). The same issue can happen if anything else other than fiemap locks a range that covers eof and beyond. This could be triggered, sporadically, by test case generic/561 from the fstests suite, which makes duperemove run concurrently with fsstress, and duperemove does plenty of calls to fiemap. When CONFIG_BTRFS_DEBUG is set the leak is reported in dmesg/syslog when removing the btrfs module with a message like the following: [77100.039461] BTRFS: state leak: start 6574080 end 6582271 state 16402 in tree 0 refs 1 Otherwise (CONFIG_BTRFS_DEBUG not set) detectable with kmemleak. CC: stable@vger.kernel.org # 4.16+ Reviewed-by:
-
Filipe Manana authored
[ Upstream commit 29d47d00 ] If we failed to allocate the data extent(s) for the inode space cache, we were bailing out without releasing the previously reserved metadata. This was triggering the following warnings when unmounting a filesystem: $ cat -n fs/btrfs/inode.c (...) 9268 void btrfs_destroy_inode(struct inode *inode) 9269 { (...) 9276 WARN_ON(BTRFS_I(inode)->block_rsv.reserved); 9277 WARN_ON(BTRFS_I(inode)->block_rsv.size); (...) 9281 WARN_ON(BTRFS_I(inode)->csum_bytes); 9282 WARN_ON(BTRFS_I(inode)->defrag_bytes); (...) Several fstests test cases triggered this often, such as generic/083, generic/102, generic/172, generic/269 and generic/300 at least, producing stack traces like the following in dmesg/syslog: [82039.079546] WARNING: CPU: 2 PID: 13167 at fs/btrfs/inode.c:9276 btrfs_destroy_inode+0x203/0x270 [btrfs] (...) [82039.081543] CPU: 2 PID: 13167 Comm: umount Tainted: G W 5.2.0-rc4-btrfs-next-50 #1 [82039.081912] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [82039.082673] RIP: 0010:btrfs_destroy_inode+0x203/0x270 [btrfs] (...) [82039.083913] RSP: 0018:ffffac0b426a7d30 EFLAGS: 00010206 [82039.084320] RAX: ffff8ddf77691158 RBX: ffff8dde29b34660 RCX: 0000000000000002 [82039.084736] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8dde29b34660 [82039.085156] RBP: ffff8ddf5fbec000 R08: 0000000000000000 R09: 0000000000000000 [82039.085578] R10: ffffac0b426a7c90 R11: ffffffffb9aad768 R12: ffffac0b426a7db0 [82039.086000] R13: ffff8ddf5fbec0a0 R14: dead000000000100 R15: 0000000000000000 [82039.086416] FS: 00007f8db96d12c0(0000) GS:ffff8de036b00000(0000) knlGS:0000000000000000 [82039.086837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [82039.087253] CR2: 0000000001416108 CR3: 00000002315cc001 CR4: 00000000003606e0 [82039.087672] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [82039.088089] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [82039.088504] Call Trace: [82039.088918] destroy_inode+0x3b/0x70 [82039.089340] btrfs_free_fs_root+0x16/0xa0 [btrfs] [82039.089768] btrfs_free_fs_roots+0xd8/0x160 [btrfs] [82039.090183] ? wait_for_completion+0x65/0x1a0 [82039.090607] close_ctree+0x172/0x370 [btrfs] [82039.091021] generic_shutdown_super+0x6c/0x110 [82039.091427] kill_anon_super+0xe/0x30 [82039.091832] btrfs_kill_super+0x12/0xa0 [btrfs] [82039.092233] deactivate_locked_super+0x3a/0x70 [82039.092636] cleanup_mnt+0x3b/0x80 [82039.093039] task_work_run+0x93/0xc0 [82039.093457] exit_to_usermode_loop+0xfa/0x100 [82039.093856] do_syscall_64+0x162/0x1d0 [82039.094244] entry_SYSCALL_64_after_hwframe+0x49/0xbe [82039.094634] RIP: 0033:0x7f8db8fbab37 (...) [82039.095876] RSP: 002b:00007ffdce35b468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [82039.096290] RAX: 0000000000000000 RBX: 0000560d20b00060 RCX: 00007f8db8fbab37 [82039.096700] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000560d20b00240 [82039.097110] RBP: 0000560d20b00240 R08: 0000560d20b00270 R09: 0000000000000015 [82039.097522] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f8db94bce64 [82039.097937] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffdce35b6f0 [82039.098350] irq event stamp: 0 [82039.098750] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [82039.099150] hardirqs last disabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00 [82039.099545] softirqs last enabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00 [82039.099925] softirqs last disabled at (0): [<0000000000000000>] 0x0 [82039.100292] ---[ end trace f2521afa616ddccc ]--- [82039.100707] WARNING: CPU: 2 PID: 13167 at fs/btrfs/inode.c:9277 btrfs_destroy_inode+0x1ac/0x270 [btrfs] (...) [82039.103050] CPU: 2 PID: 13167 Comm: umount Tainted: G W 5.2.0-rc4-btrfs-next-50 #1 [82039.103428] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [82039.104203] RIP: 0010:btrfs_destroy_inode+0x1ac/0x270 [btrfs] (...) [82039.105461] RSP: 0018:ffffac0b426a7d30 EFLAGS: 00010206 [82039.105866] RAX: ffff8ddf77691158 RBX: ffff8dde29b34660 RCX: 0000000000000002 [82039.106270] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8dde29b34660 [82039.106673] RBP: ffff8ddf5fbec000 R08: 0000000000000000 R09: 0000000000000000 [82039.107078] R10: ffffac0b426a7c90 R11: ffffffffb9aad768 R12: ffffac0b426a7db0 [82039.107487] R13: ffff8ddf5fbec0a0 R14: dead000000000100 R15: 0000000000000000 [82039.107894] FS: 00007f8db96d12c0(0000) GS:ffff8de036b00000(0000) knlGS:0000000000000000 [82039.108309] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [82039.108723] CR2: 0000000001416108 CR3: 00000002315cc001 CR4: 00000000003606e0 [82039.109146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [82039.109567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [82039.109989] Call Trace: [82039.110405] destroy_inode+0x3b/0x70 [82039.110830] btrfs_free_fs_root+0x16/0xa0 [btrfs] [82039.111257] btrfs_free_fs_roots+0xd8/0x160 [btrfs] [82039.111675] ? wait_for_completion+0x65/0x1a0 [82039.112101] close_ctree+0x172/0x370 [btrfs] [82039.112519] generic_shutdown_super+0x6c/0x110 [82039.112988] kill_anon_super+0xe/0x30 [82039.113439] btrfs_kill_super+0x12/0xa0 [btrfs] [82039.113861] deactivate_locked_super+0x3a/0x70 [82039.114278] cleanup_mnt+0x3b/0x80 [82039.114685] task_work_run+0x93/0xc0 [82039.115083] exit_to_usermode_loop+0xfa/0x100 [82039.115476] do_syscall_64+0x162/0x1d0 [82039.115863] entry_SYSCALL_64_after_hwframe+0x49/0xbe [82039.116254] RIP: 0033:0x7f8db8fbab37 (...) [82039.117463] RSP: 002b:00007ffdce35b468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [82039.117882] RAX: 0000000000000000 RBX: 0000560d20b00060 RCX: 00007f8db8fbab37 [82039.118330] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000560d20b00240 [82039.118743] RBP: 0000560d20b00240 R08: 0000560d20b00270 R09: 0000000000000015 [82039.119159] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f8db94bce64 [82039.119574] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffdce35b6f0 [82039.119987] irq event stamp: 0 [82039.120387] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [82039.120787] hardirqs last disabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00 [82039.121182] softirqs last enabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00 [82039.121563] softirqs last disabled at (0): [<0000000000000000>] 0x0 [82039.121933] ---[ end trace f2521afa616ddccd ]--- [82039.122353] WARNING: CPU: 2 PID: 13167 at fs/btrfs/inode.c:9278 btrfs_destroy_inode+0x1bc/0x270 [btrfs] (...) [82039.124606] CPU: 2 PID: 13167 Comm: umount Tainted: G W 5.2.0-rc4-btrfs-next-50 #1 [82039.125008] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [82039.125801] RIP: 0010:btrfs_destroy_inode+0x1bc/0x270 [btrfs] (...) [82039.126998] RSP: 0018:ffffac0b426a7d30 EFLAGS: 00010202 [82039.127399] RAX: ffff8ddf77691158 RBX: ffff8dde29b34660 RCX: 0000000000000002 [82039.127803] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8dde29b34660 [82039.128206] RBP: ffff8ddf5fbec000 R08: 0000000000000000 R09: 0000000000000000 [82039.128611] R10: ffffac0b426a7c90 R11: ffffffffb9aad768 R12: ffffac0b426a7db0 [82039.129020] R13: ffff8ddf5fbec0a0 R14: dead000000000100 R15: 0000000000000000 [82039.129428] FS: 00007f8db96d12c0(0000) GS:ffff8de036b00000(0000) knlGS:0000000000000000 [82039.129846] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [82039.130261] CR2: 0000000001416108 CR3: 00000002315cc001 CR4: 00000000003606e0 [82039.130684] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [82039.131142] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [82039.131561] Call Trace: [82039.131990] destroy_inode+0x3b/0x70 [82039.132417] btrfs_free_fs_root+0x16/0xa0 [btrfs] [82039.132844] btrfs_free_fs_roots+0xd8/0x160 [btrfs] [82039.133262] ? wait_for_completion+0x65/0x1a0 [82039.133688] close_ctree+0x172/0x370 [btrfs] [82039.134157] generic_shutdown_super+0x6c/0x110 [82039.134575] kill_anon_super+0xe/0x30 [82039.134997] btrfs_kill_super+0x12/0xa0 [btrfs] [82039.135415] deactivate_locked_super+0x3a/0x70 [82039.135832] cleanup_mnt+0x3b/0x80 [82039.136239] task_work_run+0x93/0xc0 [82039.136637] exit_to_usermode_loop+0xfa/0x100 [82039.137029] do_syscall_64+0x162/0x1d0 [82039.137418] entry_SYSCALL_64_after_hwframe+0x49/0xbe [82039.137812] RIP: 0033:0x7f8db8fbab37 (...) [82039.139059] RSP: 002b:00007ffdce35b468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [82039.139475] RAX: 0000000000000000 RBX: 0000560d20b00060 RCX: 00007f8db8fbab37 [82039.139890] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000560d20b00240 [82039.140302] RBP: 0000560d20b00240 R08: 0000560d20b00270 R09: 0000000000000015 [82039.140719] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f8db94bce64 [82039.141138] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffdce35b6f0 [82039.141597] irq event stamp: 0 [82039.142043] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [82039.142443] hardirqs last disabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00 [82039.142839] softirqs last enabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00 [82039.143220] softirqs last disabled at (0): [<0000000000000000>] 0x0 [82039.143588] ---[ end trace f2521afa616ddcce ]--- [82039.167472] WARNING: CPU: 3 PID: 13167 at fs/btrfs/extent-tree.c:10120 btrfs_free_block_groups+0x30d/0x460 [btrfs] (...) [82039.173800] CPU: 3 PID: 13167 Comm: umount Tainted: G W 5.2.0-rc4-btrfs-next-50 #1 [82039.174847] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [82039.177031] RIP: 0010:btrfs_free_block_groups+0x30d/0x460 [btrfs] (...) [82039.180397] RSP: 0018:ffffac0b426a7dd8 EFLAGS: 00010206 [82039.181574] RAX: ffff8de010a1db40 RBX: ffff8de010a1db40 RCX: 0000000000170014 [82039.182711] RDX: ffff8ddff4380040 RSI: ffff8de010a1da58 RDI: 0000000000000246 [82039.183817] RBP: ffff8ddf5fbec000 R08: 0000000000000000 R09: 0000000000000000 [82039.184925] R10: ffff8de036404380 R11: ffffffffb8a5ea00 R12: ffff8de010a1b2b8 [82039.186090] R13: ffff8de010a1b2b8 R14: 0000000000000000 R15: dead000000000100 [82039.187208] FS: 00007f8db96d12c0(0000) GS:ffff8de036b80000(0000) knlGS:0000000000000000 [82039.188345] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [82039.189481] CR2: 00007fb044005170 CR3: 00000002315cc006 CR4: 00000000003606e0 [82039.190674] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [82039.191829] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [82039.192978] Call Trace: [82039.194160] close_ctree+0x19a/0x370 [btrfs] [82039.195315] generic_shutdown_super+0x6c/0x110 [82039.196486] kill_anon_super+0xe/0x30 [82039.197645] btrfs_kill_super+0x12/0xa0 [btrfs] [82039.198696] deactivate_locked_super+0x3a/0x70 [82039.199619] cleanup_mnt+0x3b/0x80 [82039.200559] task_work_run+0x93/0xc0 [82039.201505] exit_to_usermode_loop+0xfa/0x100 [82039.202436] do_syscall_64+0x162/0x1d0 [82039.203339] entry_SYSCALL_64_after_hwframe+0x49/0xbe [82039.204091] RIP: 0033:0x7f8db8fbab37 (...) [82039.206360] RSP: 002b:00007ffdce35b468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [82039.207132] RAX: 0000000000000000 RBX: 0000560d20b00060 RCX: 00007f8db8fbab37 [82039.207906] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000560d20b00240 [82039.208621] RBP: 0000560d20b00240 R08: 0000560d20b00270 R09: 0000000000000015 [82039.209285] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f8db94bce64 [82039.209984] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffdce35b6f0 [82039.210642] irq event stamp: 0 [82039.211306] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [82039.211971] hardirqs last disabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00 [82039.212643] softirqs last enabled at (0): [<ffffffffb7884ff2>] copy_process.part.33+0x7f2/0x1f00 [82039.213304] softirqs last disabled at (0): [<0000000000000000>] 0x0 [82039.213875] ---[ end trace f2521afa616ddccf ]--- Fix this by releasing the reserved metadata on failure to allocate data extent(s) for the inode cache. Fixes: 69fe2d75 ("btrfs: make the delalloc block rsv per inode") Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit b2155578 ] Commit 721b1d98 ("dm snapshot: Fix excessive memory usage and workqueue stalls") introduced a semaphore to limit the maximum number of in-flight kcopyd (COW) jobs. The implementation of this throttling mechanism is prone to a deadlock: 1. One or more threads write to the origin device causing COW, which is performed by kcopyd. 2. At some point some of these threads might reach the s->cow_count semaphore limit and block in down(&s->cow_count), holding a read lock on _origins_lock. 3. Someone tries to acquire a write lock on _origins_lock, e.g., snapshot_ctr(), which blocks because the threads at step (2) already hold a read lock on it. 4. A COW operation completes and kcopyd runs dm-snapshot's completion callback, which ends up calling pending_complete(). pending_complete() tries to resubmit any deferred origin bios. This requires acquiring a read lock on _origins_lock, which blocks. This happens because the read-write semaphore implementation gives priority to writers, meaning that as soon as a writer tries to enter the critical section, no readers will be allowed in, until all writers have completed their work. So, pending_complete() waits for the writer at step (3) to acquire and release the lock. This writer waits for the readers at step (2) to release the read lock and those readers wait for pending_complete() (the kcopyd thread) to signal the s->cow_count semaphore: DEADLOCK. The above was thoroughly analyzed and documented by Nikos Tsironis as part of his initial proposal for fixing this deadlock, see: https://www.redhat.com/archives/dm-devel/2019-October/msg00001.html Fix this deadlock by reworking COW throttling so that it waits without holding any locks. Add a variable 'in_progress' that counts how many kcopyd jobs are running. A function wait_for_in_progress() will sleep if 'in_progress' is over the limit. It drops _origins_lock in order to avoid the deadlock. Reported-by:
Guruswamy Basavaiah <guru2018@gmail.com> Reported-by:
Nikos Tsironis <ntsironis@arrikto.com> Reviewed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit a2f83e8b ] This simple refactoring moves code for modifying the semaphore cow_count into separate functions to prepare for changes that will extend these methods to provide for a more sophisticated mechanism for COW throttling. Signed-off-by:
-
Sasha Levin authored
[ Upstream commit f7daefe4 ] CPU0: CPU1: backing_dev_show backing_dev_store ...... ...... file = zram->backing_dev; down_read(&zram->init_lock); down_read(&zram->init_init_lock) file_path(file, ...); zram->backing_dev = backing_dev; up_read(&zram->init_lock); up_read(&zram->init_lock); gets the value of zram->backing_dev too early in backing_dev_show, which resultin the value being NULL at the beginning, and not NULL later. backtrace: d_path+0xcc/0x174 file_path+0x10/0x18 backing_dev_show+0x40/0xb4 dev_attr_show+0x20/0x54 sysfs_kf_seq_show+0x9c/0x10c kernfs_seq_show+0x28/0x30 seq_read+0x184/0x488 kernfs_fop_read+0x5c/0x1a4 __vfs_read+0x44/0x128 vfs_read+0xa0/0x138 SyS_read+0x54/0xb4 Link: http://lkml.kernel.org/r/1571046839-16814-1-git-send-email-chenwandun@huawei.comSigned-off-by:
Chenwandun <chenwandun@huawei.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by:
-
- 29 Oct, 2019 11 commits
-
-
Greg Kroah-Hartman authored
-
Greg KH authored
commit 3840c5b7 upstream. Nicolas pointed out that the cxgb4 driver is doing dma off of the stack, which is generally considered a very bad thing. On some architectures it could be a security problem, but odds are none of them actually run this driver, so it's just a "normal" bug. Resolve this by allocating the memory for a message off of the heap instead of the stack. kmalloc() always will give us a proper memory location that DMA will work correctly from. Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.comReported-by:
Nicolas Waisman <nico@semmle.com> Tested-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Tejun Heo authored
commit 307f4065 upstream. rq_qos_del() incorrectly assigns the node being deleted to the head if it was the first on the list in the !prev path. Fix it by iterating with ** instead. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Fixes: a7905043 ("blk-rq-qos: refactor out common elements of blk-wbt") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Rafael J. Wysocki authored
commit 45144d42 upstream. There is an arbitrary difference between the system resume and runtime resume code paths for PCI devices regarding the delay to apply when switching the devices from D3cold to D0. Namely, pci_restore_standard_config() used in the runtime resume code path calls pci_set_power_state() which in turn invokes __pci_start_power_transition() to power up the device through the platform firmware and that function applies the transition delay (as per PCI Express Base Specification Revision 2.0, Section 6.6.1). However, pci_pm_default_resume_early() used in the system resume code path calls pci_power_up() which doesn't apply the delay at all and that causes issues to occur during resume from suspend-to-idle on some systems where the delay is required. Since there is no reason for that difference to exist, modify pci_power_up() to follow pci_set_power_state() more closely and invoke __pci_start_power_transition() from there to call the platform firmware to power up the device (in case that's necessary). Fixes: db288c9c ("PCI / PM: restore the original behavior of pci_set_power_state()") Reported-by:
Daniel Drake <drake@endlessm.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
-
Juergen Gross authored
commit 3d5c1a03 upstream. xenvif_connect_data() calls module_put() in case of error. This is wrong as there is no related module_get(). Remove the superfluous module_put(). Fixes: 279f438e ("xen-netback: Don't destroy the netdev until the vif is shut down") Cc: <stable@vger.kernel.org> # 3.12 Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Paul Durrant <paul@xen.org> Reviewed-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Rafael J. Wysocki authored
commit 65650b35 upstream. It is incorrect to set the cpufreq syscore shutdown callback pointer to cpufreq_suspend(), because that function cannot be run in the syscore stage of system shutdown for two reasons: (a) it may attempt to carry out actions depending on devices that have already been shut down at that point and (b) the RCU synchronization carried out by it may not be able to make progress then. The latter issue has been present since commit 45975c7d ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds"), but the former one has been there since commit 90de2a4a ("cpufreq: suspend cpufreq governors on shutdown") regardless. Fix that by dropping cpufreq_syscore_ops altogether and making device_shutdown() call cpufreq_suspend() directly before shutting down devices, which is along the lines of what system-wide power management does. Fixes: 45975c7d ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds") Fixes: 90de2a4a ("cpufreq: suspend cpufreq governors on shutdown") Reported-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.0+ <stable@vger.kernel.org> # 4.0+ Signed-off-by:
-
Christophe JAILLET authored
commit 28c9fac0 upstream. If 'jmb38x_ms_count_slots()' returns 0, we must undo the previous 'pci_request_regions()' call. Goto 'err_out_int' to fix it. Fixes: 60fdd931 ("memstick: add support for JMicron jmb38x MemoryStick host controller") Cc: stable@vger.kernel.org Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Qu Wenruo authored
commit 1b2442b4 upstream. [BUG] For btrfs:qgroup_meta_reserve event, the trace event can output garbage: qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=DATA diff=2 qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=0x258792 diff=2 The @type can be completely garbage, as DATA type is not possible for trace_qgroup_meta_reserve() trace event. [CAUSE] Ther are several problems related to qgroup trace events: - Unassigned entry member Member entry::type of trace_qgroup_update_reserve() and trace_qgourp_meta_reserve() is not assigned - Redundant entry member Member entry::type is completely useless in trace_qgroup_meta_convert() Fixes: 4ee0d883 ("btrfs: qgroup: Update trace events for metadata reservation") CC: stable@vger.kernel.org # 4.10+ Reviewed-by:
-
Filipe Manana authored
commit ba0b084a upstream. We were checking for the full fsync flag in the inode before locking the inode, which is racy, since at that that time it might not be set but after we acquire the inode lock some other task set it. One case where this can happen is on a system low on memory and some concurrent task failed to allocate an extent map and therefore set the full sync flag on the inode, to force the next fsync to work in full mode. A consequence of missing the full fsync flag set is hitting the problems fixed by commit 0c713cba ("Btrfs: fix race between ranged fsync and writeback of adjacent ranges"), BUG_ON() when dropping extents from a log tree, hitting assertion failures at tree-log.c:copy_items() or all sorts of weird inconsistencies after replaying a log due to file extents items representing ranges that overlap. So just move the check such that it's done after locking the inode and before starting writeback again. Fixes: 0c713cba ("Btrfs: fix race between ranged fsync and writeback of adjacent ranges") CC: stable@vger.kernel.org # 5.2+ Signed-off-by:
-
Filipe Manana authored
commit 44db1216 upstream. If we error out when finding a page at relocate_file_extent_cluster(), we need to release the outstanding extents counter on the relocation inode, set by the previous call to btrfs_delalloc_reserve_metadata(), otherwise the inode's block reserve size can never decrease to zero and metadata space is leaked. Therefore add a call to btrfs_delalloc_release_extents() in case we can't find the target page. Fixes: 8b62f87b ("Btrfs: rework outstanding_extents") CC: stable@vger.kernel.org # 4.19+ Signed-off-by:
-
Qu Wenruo authored
commit 4b654acd upstream. In btrfs_read_block_groups(), if we have an invalid block group which has mixed type (DATA|METADATA) while the fs doesn't have MIXED_GROUPS feature, we error out without freeing the block group cache. This patch will add the missing btrfs_put_block_group() to prevent memory leak. Note for stable backports: the file to patch in versions <= 5.3 is fs/btrfs/extent-tree.c Fixes: 49303381 ("Btrfs: bail out if block group has different mixed flag") CC: stable@vger.kernel.org # 4.9+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
