- 05 Dec, 2019 40 commits
-
-
Xin Long authored
[ Upstream commit 31243461 ] This patch is to fix a data-race reported by syzbot: BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1: sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091 sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465 sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916 inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734 __sys_accept4+0x224/0x430 net/socket.c:1754 __do_sys_accept net/socket.c:1795 [inline] __se_sys_accept net/socket.c:1792 [inline] __x64_sys_accept+0x4e/0x60 net/socket.c:1792 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0: sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894 rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] head_hashfn lib/rhashtable.c:41 [inline] rhashtable_rehash_one lib/rhashtable.c:245 [inline] rhashtable_rehash_chain lib/rhashtable.c:276 [inline] rhashtable_rehash_table lib/rhashtable.c:316 [inline] rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate is changing its value. However, what rhashtable wants is netns from asoc base.sk, and for an asoc, its netns won't change once set. So we can simply fix it by caching netns since created. Fixes: d6c0256a ("sctp: add the rhashtable apis for sctp global transport hashtable") Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Rutherford authored
[ Upstream commit fd567ac2 ] In commit 4f07b80c ("tipc: check msg->req data len in tipc_nl_compat_bearer_disable") the same patch code was copied into routines: tipc_nl_compat_bearer_disable(), tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats(). The two link routine occurrences should have been modified to check the maximum link name length and not bearer name length. Fixes: 4f07b80c ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable") Signed-off-by: John Rutherford <john.rutherford@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakub Kicinski authored
[ Upstream commit 4b67c515 ] test_sockmap creates a temporary file to use for sendpage. this may fail for various reasons. Handle the error rather than segfault. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Abeni authored
[ Upstream commit 8a574f86 ] If we can't build the flow del notification, we can simply delete the flow, no need to crash the kernel. Still keep a WARN_ON to preserve debuggability. Note: the BUG_ON() predates the Fixes tag, but this change can be applied only after the mentioned commit. v1 -> v2: - do not leak an skb on error Fixes: aed06778 ("openvswitch: Minimize ovs_flow_cmd_del critical section.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Abeni authored
[ Upstream commit 8ffeb03f ] All the callers of ovs_flow_cmd_build_info() already deal with error return code correctly, so we can handle the error condition in a more gracefull way. Still dump a warning to preserve debuggability. v1 -> v2: - clarify the commit message - clean the skb and report the error (DaveM) Fixes: ccb1352e ("net: Add Open vSwitch kernel components.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jouni Hogander authored
[ Upstream commit e58c1912 ] Slip_open doesn't clean-up device which registration failed from the slip_devs device list. On next open after failure this list is iterated and freed device is accessed. Fix this by calling sl_free_netdev in error path. Here is the trace from the Syzbot: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3b5a3997 ("slip: Fix memory leak in slip_open error path") Reported-by: syzbot+4d5170758f3762109542@syzkaller.appspotmail.com Cc: David Miller <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Navid Emamdoost authored
[ Upstream commit b6631c60 ] In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated new_asoc is leaked if security_sctp_assoc_request() fails. Release it via sctp_association_free(). Fixes: 2277c7cd ("sctp: Add LSM hooks") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Abeni authored
[ Upstream commit 4e81c0b3 ] When user-space sets the OVS_UFID_F_OMIT_* flags, and the relevant flow has no UFID, we can exceed the computed size, as ovs_nla_put_identifier() will always dump an OVS_FLOW_ATTR_KEY attribute. Take the above in account when computing the flow command message size. Fixes: 74ed7ab9 ("openvswitch: Add support for unique flow IDs.") Reported-by: Qi Jun Ding <qding@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
[ Upstream commit 7eb9d767 ] We need to calculate the skb size correctly otherwise we risk triggering skb_over_panic[1]. The issue is that data_len is added to the skb in a nl attribute, but we don't account for its header size (nlattr 4 bytes) and alignment. We account for it when calculating the total size in the > PSAMPLE_MAX_PACKET_SIZE comparison correctly, but not when allocating after that. The fix is simple - use nla_total_size() for data_len when allocating. To reproduce: $ tc qdisc add dev eth1 clsact $ tc filter add dev eth1 egress matchall action sample rate 1 group 1 trunc 129 $ mausezahn eth1 -b bcast -a rand -c 1 -p 129 < skb_over_panic BUG(), tail is 4 bytes past skb->end > [1] Trace: [ 50.459526][ T3480] skbuff: skb_over_panic: text:(____ptrval____) len:196 put:136 head:(____ptrval____) data:(____ptrval____) tail:0xc4 end:0xc0 dev:<NULL> [ 50.474339][ T3480] ------------[ cut here ]------------ [ 50.481132][ T3480] kernel BUG at net/core/skbuff.c:108! [ 50.486059][ T3480] invalid opcode: 0000 [#1] PREEMPT SMP [ 50.489463][ T3480] CPU: 3 PID: 3480 Comm: mausezahn Not tainted 5.4.0-rc7 #108 [ 50.492844][ T3480] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 50.496551][ T3480] RIP: 0010:skb_panic+0x79/0x7b [ 50.498261][ T3480] Code: bc 00 00 00 41 57 4c 89 e6 48 c7 c7 90 29 9a 83 4c 8b 8b c0 00 00 00 50 8b 83 b8 00 00 00 50 ff b3 c8 00 00 00 e8 ae ef c0 fe <0f> 0b e8 2f df c8 fe 48 8b 55 08 44 89 f6 4c 89 e7 48 c7 c1 a0 22 [ 50.504111][ T3480] RSP: 0018:ffffc90000447a10 EFLAGS: 00010282 [ 50.505835][ T3480] RAX: 0000000000000087 RBX: ffff888039317d00 RCX: 0000000000000000 [ 50.507900][ T3480] RDX: 0000000000000000 RSI: ffffffff812716e1 RDI: 00000000ffffffff [ 50.509820][ T3480] RBP: ffffc90000447a60 R08: 0000000000000001 R09: 0000000000000000 [ 50.511735][ T3480] R10: ffffffff81d4f940 R11: 0000000000000000 R12: ffffffff834a22b0 [ 50.513494][ T3480] R13: ffffffff82c10433 R14: 0000000000000088 R15: ffffffff838a8084 [ 50.515222][ T3480] FS: 00007f3536462700(0000) GS:ffff88803eac0000(0000) knlGS:0000000000000000 [ 50.517135][ T3480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 50.518583][ T3480] CR2: 0000000000442008 CR3: 000000003b222000 CR4: 00000000000006e0 [ 50.520723][ T3480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 50.522709][ T3480] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 50.524450][ T3480] Call Trace: [ 50.525214][ T3480] skb_put.cold+0x1b/0x1b [ 50.526171][ T3480] psample_sample_packet+0x1d3/0x340 [ 50.527307][ T3480] tcf_sample_act+0x178/0x250 [ 50.528339][ T3480] tcf_action_exec+0xb1/0x190 [ 50.529354][ T3480] mall_classify+0x67/0x90 [ 50.530332][ T3480] tcf_classify+0x72/0x160 [ 50.531286][ T3480] __dev_queue_xmit+0x3db/0xd50 [ 50.532327][ T3480] dev_queue_xmit+0x18/0x20 [ 50.533299][ T3480] packet_sendmsg+0xee7/0x2090 [ 50.534331][ T3480] sock_sendmsg+0x54/0x70 [ 50.535271][ T3480] __sys_sendto+0x148/0x1f0 [ 50.536252][ T3480] ? tomoyo_file_ioctl+0x23/0x30 [ 50.537334][ T3480] ? ksys_ioctl+0x5e/0xb0 [ 50.540068][ T3480] __x64_sys_sendto+0x2a/0x30 [ 50.542810][ T3480] do_syscall_64+0x73/0x1f0 [ 50.545383][ T3480] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 50.548477][ T3480] RIP: 0033:0x7f35357d6fb3 [ 50.551020][ T3480] Code: 48 8b 0d 18 90 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 d3 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 eb f6 ff ff 48 89 04 24 [ 50.558547][ T3480] RSP: 002b:00007ffe0c7212c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 50.561870][ T3480] RAX: ffffffffffffffda RBX: 0000000001dac010 RCX: 00007f35357d6fb3 [ 50.565142][ T3480] RDX: 0000000000000082 RSI: 0000000001dac2a2 RDI: 0000000000000003 [ 50.568469][ T3480] RBP: 00007ffe0c7212f0 R08: 00007ffe0c7212d0 R09: 0000000000000014 [ 50.571731][ T3480] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000082 [ 50.574961][ T3480] R13: 0000000001dac2a2 R14: 0000000000000001 R15: 0000000000000003 [ 50.578170][ T3480] Modules linked in: sch_ingress virtio_net [ 50.580976][ T3480] ---[ end trace 61a515626a595af6 ]--- CC: Yotam Gigi <yotamg@mellanox.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Simon Horman <simon.horman@netronome.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 6ae0a628 ("net: Introduce psample, a new genetlink channel for packet sampling") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Menglong Dong authored
[ Upstream commit 1d7ea556 ] While enqueueing a broadcast skb to port->bc_queue, schedule_work() is called to add port->bc_work, which processes the skbs in bc_queue, to "events" work queue. If port->bc_queue is full, the skb will be discarded and schedule_work(&port->bc_work) won't be called. However, if port->bc_queue is full and port->bc_work is not running or pending, port->bc_queue will keep full and schedule_work() won't be called any more, and all broadcast skbs to macvlan will be discarded. This case can happen: macvlan_process_broadcast() is the pending function of port->bc_work, it moves all the skbs in port->bc_queue to the queue "list", and processes the skbs in "list". During this, new skbs will keep being added to port->bc_queue in macvlan_broadcast_enqueue(), and port->bc_queue may already full when macvlan_process_broadcast() return. This may happen, especially when there are a lot of real-time threads and the process is preempted. Fix this by calling schedule_work(&port->bc_work) even if port->bc_work is full in macvlan_broadcast_enqueue(). Fixes: 412ca155 ("macvlan: Move broadcasts into a work queue") Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugen Hristev authored
commit 79199002 upstream. In case the completion function failes, unbind will be called which will call cancel_work for awb_work. This will trigger a WARN message from the workqueue. To avoid this, move the INIT_WORK call at the start of the completion function. This way the work is always initialized, which corresponds to the 'always canceled' unbind code. Fixes: 93d4a26c ("[media] atmel-isc: add the isc pipeline function") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugen Hristev authored
commit 1e4e25c4 upstream. The subsystem will free the asd memory on notifier cleanup, if the asd is added to the notifier. However the memory is freed using kfree. Thus, we cannot allocate the asd using devm_* This can lead to crashes and problems. To test this issue, just return an error at probe, but cleanup the notifier beforehand. Fixes: 10626744 ("[media] atmel-isc: add the Image Sensor Controller code") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uwe Kleine-König authored
commit e926b12c upstream. After a PWM is disposed by its user the per chip data becomes invalid. Clear the data in common code instead of the device drivers to get consistent behaviour. Before this patch only three of nine drivers cleaned up here. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luca Ceresoli authored
commit f413cbb3 upstream. Errors are negative numbers. Using %u shows them as very large positive numbers such as 4294967277 that don't make sense. Use the %d format instead, and get a much nicer -19. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Fixes: b48e0bab ("net: macb: Migrate to devm clock interface") Fixes: 93b31f48 ("net/macb: unify clock management") Fixes: 421d9df0 ("net/macb: merge at91_ether driver into macb driver") Fixes: aead88bd ("net: ethernet: macb: Add support for rx_clk") Fixes: f5473d1d ("net: macb: Support clock management for tsu_clk") Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugen Hristev authored
commit a0816e50 upstream. Control DO_WHITE_BALANCE is a button, with read only and execute-on-write flags. Adding this control in the proper list in the fill function. After adding it here, we can see output of v4l2-ctl -L do_white_balance 0x0098090d (button) : flags=write-only, execute-on-write Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steffen Klassert authored
commit 86c6739e upstream. We leak the page that we use to create skb page fragments when destroying the xfrm_state. Fix this by dropping a page reference if a page was assigned to the xfrm_state. Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible") Reported-by: JD <jdtxs00@gmail.com> Reported-by: Paul Wouters <paul@nohats.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mika Westerberg authored
commit 7a7ebfa8 upstream. On zang's Dell XPS 13 9370 after Thunderbolt NVM firmware upgrade the Thunderbolt controller did not come back as expected. Only after the system was rebooted it became available again. It is not entirely clear what happened but I suspect the new NVM firmware image authentication failed for some reason. Regardless of this the router needs to be power cycled if NVM authentication fails in order to get it fully functional again. This modifies the driver to issue a power cycle in case the NVM authentication fails immediately when dma_port_flash_update_auth() returns. We also need to call tb_switch_set_uuid() earlier to be able to fetch possible NVM authentication failure when DMA port is added. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205457Reported-by: zang <dump@tzib.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit 82b29b9f upstream. Comet Point (Comet Lake) V device id. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191105150514.14010-2-tomas.winkler@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit 7a2b9e6e upstream. Add parent device name to the name of devices on bus to avoid device names collisions for same client UUID available from different MEI heads. Namely this prevents sysfs collision under /sys/bus/mei/device/ In the device part leave just UUID other parameters that are required for device matching are not required here and are just bloating the name. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191105150514.14010-1-tomas.winkler@intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio D'Urso authored
commit c1a1f273 upstream. This device presents itself as a USB hub with three attached devices: - An ACM serial port connected to the GPS module (not affected by this commit) - An FTDI serial port connected to the GPS module (1546:0502) - Another FTDI serial port connected to the ODIN-W2 radio module (1546:0503) This commit registers U-Blox's VID and the PIDs of the second and third devices. Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdfSigned-off-by: Fabio D'Urso <fabiodurso@hotmail.it> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 3d5f1eed upstream. Add 024c:0525 to the list of SDIO device-ids, based on a patch found in the Android X86 kernels. According to that patch this device id is used on the Alcatel Plus 10 device. Reported-and-tested-by: youling257 <youling257@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111113846.24940-1-hdegoede@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 2d9d2491 upstream. The driver only binds by SDIO device-ids, all the ACPI device-id does is causing the driver to load unnecessarily on devices where the DSDT contains a bogus OBDA8723 device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111113846.24940-2-hdegoede@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pan Bian authored
commit b7aa39a2 upstream. The variable skb is released via kfree_skb() when the return value of _rtl92e_tx is not zero. However, after that, skb is accessed again to read its length, which may result in a use after free bug. This patch fixes the bug by moving the release operation to where skb is never used later. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1572965351-6745-1-git-send-email-bianpan2016@163.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Kresin authored
commit 6689f0f4 upstream. Testing on different generations of Lantiq MIPS SoC based boards, showed that it takes up to 1500 us until the core reset bit is cleared. The driver from the vendor SDK (ifxhcd) uses a 1 second timeout. Use the same timeout to fix wrong hang detections and make the driver work for Lantiq MIPS SoCs. At least till kernel 4.14 the hanging reset only caused a warning but the driver was probed successful. With kernel 4.19 errors out with EBUSY. Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexandre Belloni authored
commit c1e4580a upstream. Set gck->audio_pll_allowed in at91_clk_register_generated. This makes it easier to do it from code that is not parsing device tree. Also, this fixes an issue where the resulting clk_hw can be dereferenced before being tested for error. Fixes: 1a1a36d7 ("clk: at91: clk-generated: make gclk determine audio_pll rate") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugen Hristev authored
commit 263eaf8f upstream. The regmap update bits call was not selecting the proper mask, considering the bits which was updating. Update the mask from call to also include OSCBYPASS. Removed MOSCEN which was not updated. Fixes: 1bdf0232 ("clk: at91: make use of syscon/regmap internally") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568042692-11784-1-git-send-email-eugen.hristev@microchip.comAcked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vlastimil Babka authored
The mainline commit 8fde12ca ("mm: prevent get_user_pages() from overflowing page refcount") was backported to 4.19.y stable as commit d972ebbf. The backport however missed that in 4.19, there are several arch-specific gup.c versions with fast gup implementations, so these do not prevent refcount overflow. This stable-only commit fixes the s390 version, and is based on the backport in SUSE SLES/openSUSE 4.12-based kernels. The remaining architectures with own gup.c are sparc, mips, sh. It's unlikely the known overflow scenario based on FUSE, which needs 140GB of RAM, is a problem for those architectures, and I don't feel confident enough to patch them. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Boris Brezillon authored
[ Upstream commit bda2ab56 ] Commit 2b6f0090 ("mtd: Check add_mtd_device() ret code") contained a leftover of the debug session that led to this bug fix. Remove this pr_info(). Fixes: 2b6f0090 ("mtd: Check add_mtd_device() ret code") Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jesper Dangaard Brouer authored
[ Upstream commit 676e4a6f ] We want to avoid leaking pointer info from xdp_frame (that is placed in top of frame) like commit 6dfb970d ("xdp: avoid leaking info stored in frame data on page reuse"), and followup commit 97e19cce ("bpf: reserve xdp_frame size in xdp headroom") that reserve this headroom. These changes also affected how cpumap constructed SKBs, as xdpf->headroom size changed, the skb data starting point were in-effect shifted with 32 bytes (sizeof xdp_frame). This was still okay, as the cpumap frame_size calculation also included xdpf->headroom which were reduced by same amount. A bug was introduced in commit 77ea5f4c ("bpf/cpumap: make sure frame_size for build_skb is aligned if headroom isn't"), where the xdpf->headroom became part of the SKB_DATA_ALIGN rounding up. This round-up to find the frame_size is in principle still correct as it does not exceed the 2048 bytes frame_size (which is max for ixgbe and i40e), but the 32 bytes offset of pkt_data_start puts this over the 2048 bytes limit. This cause skb_shared_info to spill into next frame. It is a little hard to trigger, as the SKB need to use above 15 skb_shinfo->frags[] as far as I calculate. This does happen in practise for TCP streams when skb_try_coalesce() kicks in. KASAN can be used to detect these wrong memory accesses, I've seen: BUG: KASAN: use-after-free in skb_try_coalesce+0x3cb/0x760 BUG: KASAN: wild-memory-access in skb_release_data+0xe2/0x250 Driver veth also construct a SKB from xdp_frame in this way, but is not affected, as it doesn't reserve/deduct the room (used by xdp_frame) from the SKB headroom. Instead is clears the pointers via xdp_scrub_frame(), and allows SKB to use this area. The fix in this patch is to do like veth and instead allow SKB to (re)use the area occupied by xdp_frame, by clearing via xdp_scrub_frame(). (This does kill the idea of the SKB being able to access (mem) info from this area, but I guess it was a bad idea anyhow, and it was already killed by the veth changes.) Fixes: 77ea5f4c ("bpf/cpumap: make sure frame_size for build_skb is aligned if headroom isn't") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Gen Zhang authored
[ Upstream commit efa9ace6 ] In dlpar_parse_cc_property(), 'prop->name' is allocated by kstrdup(). kstrdup() may return NULL, so it should be checked and handle error. And prop should be freed if 'prop->name' is NULL. Signed-off-by: Gen Zhang <blackgod016574@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hui Wang authored
[ Upstream commit 406dcbc5 ] The LattePanda board has a sound card chtrt5645, when there is nothing plugged in the headphone jack, the system thinks the headphone is plugged in, while we plug a headphone in the jack, the system thinks the headphone is unplugged. If adding quirk=0x21 in the module parameter, the headphone jack can work well. So let us fix it via platform_data. https://bugs.launchpad.net/bugs/182459Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 4e69cf1f ] The the below commit, hns_roce_v2_modify_qp is called inside spinlock while using GFP_KERNEL. Change it to GFP_ATOMIC. Fixes: 0425e3e6 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yixian Liu authored
[ Upstream commit ab22bf05 ] The state of mr after reregister operation should be set to valid state. Otherwise, it will keep the same as the state before reregistered. Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lijun Ou authored
[ Upstream commit 4d103905 ] In some application scenario, the user could not have receive queue when run rdma write or read operation. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lijun Ou authored
[ Upstream commit 9c6ccc03 ] When flush cqe with srq, the driver disable to update the rq head pointer into the hardware. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
John Garry authored
[ Upstream commit 01929a65 ] Currently the SMP PHY control execution result is checked, however the function result for the command is not. As such, we may be missing all potential errors, like SMP FUNCTION FAILED, INVALID REQUEST FRAME LENGTH, etc., meaning the PHY control request has failed. In some scenarios we need to ensure the function result is accepted, so add a check for this. Tested-by: Jian Luo <luojian5@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xiang Chen authored
[ Upstream commit 5c31b0c6 ] When injecting 2 bit ECC error, it will cause fatal AXI interrupts. Before the recovery of SAS controller reset, the internal of SAS controller is in error. If CQ interrupts return at the time, actually it is exception CQ interrupt, and it may cause resource release in disorder. To avoid the exception situation, shutdown AXI bus after fatal AXI interrupt. In SAS controller reset, it will restart AXI bus. For later version of v3 hw, hardware will shutdown AXI bus for this situation, so just fix current ver of v3 hw. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
James Morse authored
[ Upstream commit 0ac234be ] The ghes code is careful to parse and round firmware's advertised memory requirements for CPER records, up to a maximum of 64K. However when ghes_estatus_pool_expand() does its work, it splits the requested size into PAGE_SIZE granules. This means if firmware generates 5K of CPER records, and correctly describes this in the table, __process_error() will silently fail as it is unable to allocate more than PAGE_SIZE. Switch the estatus pool to vmalloc() memory. On x86 vmalloc() memory may fault and be fixed up by vmalloc_fault(). To prevent this call vmalloc_sync_all() before an NMI handler could discover the memory. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
James Morse authored
[ Upstream commit 78b0b690 ] oops_begin() exists to group printk() messages with the oops message printed by die(). To reach this caller we know that platform firmware took this error first, then notified the OS via NMI with a 'panic' severity. Don't wait for another CPU to release the die-lock before panic()ing, our only goal is to print this fatal error and panic(). This code is always called in_nmi(), and since commit 42a0bb3f ("printk/nmi: generic solution for safe printk in NMI"), it has been safe to call printk() from this context. Messages are batched in a per-cpu buffer and printed via irq-work, or a call back from panic(). Link: https://patchwork.kernel.org/patch/10313555/Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
John Garry authored
[ Upstream commit cec9771d ] +----------+ +----------+ | | | | | |--- 3.0 G ---| |--- 6.0 G --- SAS disk | | | | | |--- 3.0 G ---| |--- 6.0 G --- SAS disk |initiator | | | | device |--- 3.0 G ---| Expander |--- 6.0 G --- SAS disk | | | | | |--- 3.0 G ---| |--- 6.0 G --- SATA disk -->failed to connect | | | | | | | |--- 6.0 G --- SATA disk -->failed to connect | | | | +----------+ +----------+ According to Serial Attached SCSI - 1.1 (SAS-1.1): If an expander PHY attached to a SATA PHY is using a physical link rate greater than the maximum connection rate supported by the pathway from an STP initiator port, a management application client should use the SMP PHY CONTROL function (see 10.4.3.10) to set the PROGRAMMED MAXIMUM PHYSICAL LINK RATE field of the expander PHY to the maximum connection rate supported by the pathway from that STP initiator port. Currently libsas does not support checking if this condition occurs, nor rectifying when it does. Such a condition is not at all common, however it has been seen on some pre-silicon environments where the initiator PHY only supports a 1.5 Gbit maximum linkrate, mated with 12G expander PHYs and 3/6G SATA phy. This patch adds support for checking and rectifying this condition during initial device discovery only. We do support checking min pathway connection rate during revalidation phase, when new devices can be detected in the topology. However we do not support in the case of the the user reprogramming PHY linkrates, such that min pathway condition is not met/maintained. A note on root port PHY rates: The libsas root port PHY rates calculation is broken. Libsas sets the rates (min, max, and current linkrate) of a root port to the same linkrate of the first PHY member of that same port. In doing so, it assumes that all other PHYs which subsequently join the port to have the same negotiated linkrate, when they could actually be different. In practice this doesn't happen, as initiator and expander PHYs are normally initialised with consistent min/max linkrates. This has not caused an issue so far, so leave alone for now. Tested-by: Jian Luo <luojian5@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-