- 04 Jan, 2006 19 commits
-
-
Alan Stern authored
This patch (as515b) adds a routine to usbcore to simplify handling of host controllers that lost power or were reset during suspend/resume. The new core routine marks all the child devices of the root hub as NOTATTACHED and tells khubd to disconnect the device structures as soon as possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
The recent platform_device update has reintroduced into dummy_hcd.c the dreaded dev->dev syndrome. This harkens back to when an earlier version of that driver included the unforgettable line: dev->dev.dev.driver_data = dev; This patch (as602) renames the platform_device variables to "pdev", in the hope of reducing confusion. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
A.YOSHIYAMA authored
adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Petko Manolov authored
removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as601) adds a proper reference count to the file-storage gadget's main data structure, to keep track of references held by child devices (LUNs in this case). Before this, the driver would wait for each child to be released before unbinding. While there's nothing really wrong with that (you can't create a hang by doing "rmmod g_file_storage </sys/.../lun0/ro" since the open file will prevent rmmod from running), the code might as well follow the standard procedures. Besides, this shrinks the size of the structure by a few words... :-) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This modifies the HCD builds to automatically "-DDEBUG" if CONFIG_USB_DEBUG is selected. It's just a minor source code cleanup, guaranteeing consistency. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This makes the ISP116x HCD use the driver model wakeup flags for its controller, not the flags in the HCD glue (which will be removed). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This makes UHCI stop using the HCD glue wakeup flags to report whether the controller can wake the system. The existing code was wrong anyway; having a PCI PM capability doesn't imply it reports PME# is supported. I skimmed Intel's ICH7 datasheet and that basically says the wakeup signaling gets routed only through ACPI registers. (On the other hand, many VIA chips provide the PCI PM capabilities...) I think that doing this correctly with UHCI is going to require the ACPI folk to associate the /proc/acpi/wakeup identifiers (and wakeup enable/disable flags) with the relevant /sys/devices/pci*/... devices. From: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This makes the SL811 HCD use the driver model wakeup flags for its controller, not the flags in the HCD glue (which will be removed). From: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/sl811-hcd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
-
David Brownell authored
On some systems, EHCI seems to be getting IRQs too early during driver setup ... before the root hub is allocated, in particular, making trouble for any code chasing down root hub pointers! In this case, it seems to be safe to just ignore the root hub setting. Thanks to Rafael J. Wysocki for getting this properly tested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This teaches the EHCI driver to use the new driver model wakeup flags, replacing the similar ones in the HCD glue. It also adds a workaround for the current glitch whereby PCI init doesn't init the wakeup flags from the PCI PM capabilities. (EHCI controllers don't worry about legacy mode; the PCI PM capability would always do the job.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
matthieu castet authored
More care on loading firmware, take into account fw->size can't be zero. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
matthieu castet authored
A driver for USB ADSL modems based on the ADI eagle chipset using the usb_atm infrastructure. The managing part was taken from bsd ueagle driver, other parts were written from scratch. The driver uses the in-kernel firmware loader : - to load a first usb firmware when the modem is in pre-firmware state - to load the dsp firmware that are swapped in host memory. - to load CMV (configuration and management variables) when the modem boot. (We can't use options or sysfs for this as there many possible values. See https://mail.gna.org/public/eagleusb-dev/2005-04/msg00031.html for a description of some) - to load fpga code for 930 chipset. The device had 4 endpoints : * 2 for data (use by usbatm). The incoming endpoint could be iso or bulk. The modem seems buggy and produce lot's of atm errors when using it in bulk mode for speed > 3Mbps, so iso endpoint is need for speed > 3Mbps. At the moment iso endpoint need a patched usbatm library and for this reason is not included in this patch. * One bulk endpoint for uploading dsp firmware * One irq endpoint that notices the driver - if we need to upload a page of the dsp firmware - an ack for read or write CMV and the value (for the read case). If order to make the driver cleaner, we design synchronous (read|write)_cmv : -send a synchronous control message to the modem -wait for an ack or a timeout -return the value if needed. In order to run these synchronous usb messages we need a kernel thread. The driver has been tested with sagem fast 800 modems with different eagle chipset revision and with ADI 930 since April 2005. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
When the ehci-hcd driver prepares a control URB, it tests for a zero-length data stage by looking at the transfer_dma value instead of the transfer_buffer_length. (In fact it does this even for non-control URBs, which is an additional aspect of the same bug.) However, under certain circumstances it's possible for transfer_dma to be 0 while transfer_buffer_length is non-zero. This can happen when a freshly allocated page (mapped to address 0 and marked Copy-On-Write, but never written to) is used as the source buffer for an OUT transfer. This patch (as598) fixes the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Olav Kongas authored
The attached patch makes a cleanup of isp116x-hcd. Most of the volume of the patch comes from 2 sources: moving the code around to get rid of a few function prototypes and reworking register dumping functions/macros. Among other things, switched over from using procfs to debugfs. Cleanup. The following changes were made: - Rework register dumping code so it can be used for dumping to both syslog and debugfs. - Switch from procfs to debugfs.. - Die gracefully on Unrecoverable Error interrupt. - Fix memory leak in isp116x_urb_enqueue(), if HC happens to die in a narrow time window. - Fix a 'sparce' warning (unnecessary cast). - Report Devices Removable for root hub ports by default (was Devices Permanently Attached). - Move bus suspend/resume functions down in code to get rid of a few function prototypes. - A number of one-line cleanups. - Add an entry to MAINTAINERS. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> MAINTAINERS | 6 drivers/usb/host/isp116x-hcd.c | 429 ++++++++++++++++------------------------- drivers/usb/host/isp116x.h | 83 +++++-- 3 files changed, 230 insertions(+), 288 deletions(-)
-
Olav Kongas authored
Until now the isp116x-hcd had no support to reinitialize the HC on resume, if the controller lost its state during suspend. This patch, generated against your Oct 26 git tree, adds that support. The patch is basically the same as the one tested by Ivan Kalatchev, who reported the problem, on 2.6.13. Please apply, Support reinitializing the isp116x host controller from scratch on resume, if the controller has lost its state. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Kubicek authored
this patch by David converts the sending queue of the CDC ACM driver to a queue of URBs. This is needed for quicker devices. Please apply. Signed-Off-By: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/class/cdc-acm.c | 229 ++++++++++++++++++++++++++++++-------------- drivers/usb/class/cdc-acm.h | 33 +++++- 2 files changed, 185 insertions(+), 77 deletions(-)
-
Richard Purdie authored
Add power management functions for the pxa27x USB OHCI host controller. This is a totally rewritten version of the patch by Nicolas Pitre and Todd Poynor which accounts for recent USB changes. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Richard Purdie authored
To allow multiple platforms to use the PXA27x OHCI driver, the platform code needs to be moved into the board specific files in arch/arm/mach-pxa. This patch does this for mainstone and adds preliminary hooks to allow other boards to use the driver. This has been compile tested for mainstone and successfully run on Spitz (Sharp Zaurus SL-C3000) with the addition of an appropriate board support file. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 03 Jan, 2006 2 commits
-
-
Linus Torvalds authored
Hey, it's fifteen years today since I bought the machine that got Linux started. January 2nd is a good date.
-
Andi Kleen authored
Otherwise a bad mem policy system call can confuse the interleaving code into referencing undefined nodes. Originally reported by Doug Chapman I was told it's CVE-2005-3358 (one has to love these security people - they make everything sound important) Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 02 Jan, 2006 2 commits
-
-
Dag-Erling Smrgrav authored
In commit 3D59121003721a8fad11ee72e646fd9d3076b5679c, the x86 and x86-64 <asm/param.h> was changed to include <linux/config.h> for the configurable timer frequency. However, asm/param.h is sometimes used in userland (it is included indirectly from <sys/param.h>), so your commit pollutes the userland namespace with tons of CONFIG_FOO macros. This greatly confuses software packages (such as BusyBox) which use CONFIG_FOO macros themselves to control the inclusion of optional features. After a short exchange, Christoph approved this patch Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
Some G5s still occasionally experience shutdowns due to overtemp conditions despite the recent fix. After analyzing logs from such machines, it appears that the overtemp code is a bit too quick at shutting the machine down when reaching the critical temperature (tmax + 8) and doesn't leave the fan enough time to actually cool it down. This happens if the temperature of a CPU suddenly rises too high in a very short period of time, or occasionally on boot (that is the CPUs are already overtemp by the time the driver loads). This patches makes the code a bit more relaxed, leaving a few seconds to the fans to do their job before kicking the machine shutown. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 01 Jan, 2006 2 commits
-
-
Stas Sergeev authored
This should fix multi-threaded core-files Signed-off-by: stsp@aknet.ru Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This is a slightly more complete fix for the previous minimal sysctl string fix. It always terminates the returned string with a NUL, even if the full result wouldn't fit in the user-supplied buffer. The returned length is the full untruncated length, so that you can tell when truncation has occurred. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 31 Dec, 2005 3 commits
-
-
Linus Torvalds authored
-
Yi Yang authored
For the sysctl syscall, if the user wants to get the old value of a sysctl entry and set a new value for it in the same syscall, the old value is always overwritten by the new value if the sysctl entry is of string type and if the user sets its strategy to sysctl_string. This issue lies in the strategy being run twice if the strategy is set to sysctl_string, the general strategy sysctl_string always returns 0 if success. Such strategy routines as sysctl_jiffies and sysctl_jiffies_ms return 1 because they do read and write for the sysctl entry. The strategy routine sysctl_string return 0 although it actually read and write the sysctl entry. According to my analysis, if a strategy routine do read and write, it should return 1, if it just does some necessary check but not read and write, it should return 0, for example sysctl_intvec. Signed-off-by: Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
If the string was too long to fit in the user-supplied buffer, the sysctl layer would zero-terminate it by writing past the end of the buffer. Don't do that. Noticed by Yi Yang <yang.y.yi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 30 Dec, 2005 5 commits
-
-
Linus Torvalds authored
The old /proc interfaces were never updated to use loff_t, and are just generally broken. Now, we should be using the seq_file interface for all of the proc files, but converting the legacy functions is more work than most people care for and has little upside.. But at least we can make the non-LFS rules explicit, rather than just insanely wrapping the offset or something. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Denny Priebe authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
This patch fixes a typo introduced by conversion to dynamic input_dev allocation. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Erik Hovland authored
Patch from Erik Hovland This patch provides two changes. An indent is supplied for an if/else clause so that it is more readable. An acronym is incorrectly typed as UER when it should be IER. Signed-off-by: Erik Hovland <erik@hovland.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 29 Dec, 2005 7 commits
-
-
Jean Delvare authored
Thanks to Roman Zippel for the suggestion. Signed-off-by: Jean Delvare <khali@linux-fr.org> [ Short explanation: Kconfig uses ternary math: n/m/y, and !m is m ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
This reverts the series of commits 67dbb4ea 281ab031 47807ce3 that changed the GART VM start offset. It fixed some machines, but seems to continually interact badly with some X versions. Quoth Ben Herrenschmidt: "So I think at this point, the best is that we keep the old bogus code that at least is consistent with the bug in the server. I'm working on a big patch to X that reworks the memory map stuff completely and fixes those issues on the server side, I'll do a DRM patch matching this X fix as well so that the memory map is only ever set in one place and with what I hope is a correct algorithm..." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Jean Delvare authored
Fix the cyclic dependency issue between CONFIG_SAA7134_ALSA and CONFIG_SAA7134_OSS (credits to Mauro Carvalho Chehab.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Blanchard authored
Sonny has noticed hotplug CPU on ppc64 is broken in 2.6.15-*. One of the problems is that htab_initialize_secondary is called when a cpu is being brought up, but it is marked __init. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ravikiran G Thirumalai authored
Currently, we do not pass the correct start_pfn to e820_hole_size, to calculate holes. Following patch fixes that. The bug results in incorrect number of node_present_pages for each pgdat and causes ugly output in /sys and probably VM inbalances. Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Sighed-off-by: Shair Fultheim <shai@scalex86.org> Sighed-off-by: Linus Torvalds <torvalds@osdl.org>
-