- 19 Sep, 2019 6 commits
-
-
Radhakrishna Sripada authored
Disable CPS aware color pipe by setting chicken bit. BSpec: 52890 HSDES: 1409142259 v2: Move WA to ctx WA's(Daniele) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190909231445.23815-1-radhakrishna.sripada@intel.comReviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
-
Matt Roper authored
The MCC hpd table is just a subset of the ICP table; we can eliminate it and use the ICP table everywhere. The extra pins in the table won't be a problem for MCC since we still supply an appropriate hotplug trigger mask anywhere the pin table is used. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com>
-
Matt Roper authored
We generally assume future platforms will inherit the behavior of the most recent platforms, so update our DDC pin mapping defaults to match how ICP/TGP behave (i.e., pins starting from GMBUS_PIN_1_BXT for combo PHY's and pins starting from GMBUS_PIN_9_TC1_ICP for TC PHY's). MCC's non-standard handling of combo PHY C seems like a platform-specific quirk that is unlikely to be duplicated on future platforms, so continue handling it as a special case. Without this change, future platforms would default to gen4-style pin mapping which is almost certainly not what we'll want. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Chris Wilson authored
Check that we are correctly invalidating the TLB at the start of a batch after updating the GTT. v2: Comments and hold the request reference while spinning Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919131414.7495-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
When using virtual engines, the rq->engine is not stable until we hold the engine->active.lock (as the virtual engine may be exchanged with the sibling). Since commit 22b7a426 ("drm/i915/execlists: Preempt-to-busy") we may retire a request concurrently with resubmitting it to HW, we need to be extra careful to verify we are holding the correct lock for the request's active list. This is similar to the issue we saw with rescheduling the virtual requests, see sched_lock_engine(). Or else: <4> [876.736126] list_add corruption. prev->next should be next (ffff8883f931a1f8), but was dead000000000100. (prev=ffff888361ffa610). <4> [876.736136] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4> [876.736137] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915] <4> [876.736154] CPU: 2 PID: 21 Comm: ksoftirqd/2 Tainted: G U 5.3.0-CI-CI_DRM_6898+ #1 <4> [876.736156] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4> [876.736157] RIP: 0010:__list_add_valid+0x4d/0x70 <4> [876.736159] Code: c3 48 89 d1 48 c7 c7 20 33 0e 82 48 89 c2 e8 4a 4a bc ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 70 33 0e 82 e8 33 4a bc ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 c0 33 0e 82 e8 <4> [876.736160] RSP: 0018:ffffc9000018bd30 EFLAGS: 00010082 <4> [876.736162] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000104 <4> [876.736163] RDX: 0000000080000104 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [876.736164] RBP: ffffc9000018bd68 R08: 0000000000000000 R09: 0000000000000001 <4> [876.736165] R10: 00000000aed95de3 R11: 000000007fe927eb R12: ffff888361ffca10 <4> [876.736166] R13: ffff888361ffa610 R14: ffff888361ffc880 R15: ffff8883f931a1f8 <4> [876.736168] FS: 0000000000000000(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000 <4> [876.736169] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [876.736170] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0 <4> [876.736171] PKRU: 55555554 <4> [876.736172] Call Trace: <4> [876.736226] __i915_request_submit+0x152/0x370 [i915] <4> [876.736263] __execlists_submission_tasklet+0x6da/0x1f50 [i915] <4> [876.736293] ? execlists_submission_tasklet+0x29/0x50 [i915] <4> [876.736321] execlists_submission_tasklet+0x34/0x50 [i915] <4> [876.736325] tasklet_action_common.isra.5+0x47/0xb0 <4> [876.736328] __do_softirq+0xd8/0x4ae <4> [876.736332] ? smpboot_thread_fn+0x23/0x280 <4> [876.736334] ? smpboot_thread_fn+0x6b/0x280 <4> [876.736336] run_ksoftirqd+0x2b/0x50 <4> [876.736338] smpboot_thread_fn+0x1d3/0x280 <4> [876.736341] ? sort_range+0x20/0x20 <4> [876.736343] kthread+0x119/0x130 <4> [876.736345] ? kthread_park+0xa0/0xa0 <4> [876.736347] ret_from_fork+0x24/0x50 <4> [876.736353] irq event stamp: 2290145 <4> [876.736356] hardirqs last enabled at (2290144): [<ffffffff8123cde8>] __slab_free+0x3e8/0x500 <4> [876.736358] hardirqs last disabled at (2290145): [<ffffffff819cfb4d>] _raw_spin_lock_irqsave+0xd/0x50 <4> [876.736360] softirqs last enabled at (2290114): [<ffffffff81c0033e>] __do_softirq+0x33e/0x4ae <4> [876.736361] softirqs last disabled at (2290119): [<ffffffff810b815b>] run_ksoftirqd+0x2b/0x50 <4> [876.736363] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4> [876.736364] ---[ end trace 3e58d6c7356c65bf ]--- <4> [876.736406] ------------[ cut here ]------------ <4> [876.736415] list_del corruption. prev->next should be ffff888361ffca10, but was ffff88840ac2c730 <4> [876.736421] WARNING: CPU: 2 PID: 5490 at lib/list_debug.c:53 __list_del_entry_valid+0x79/0x90 <4> [876.736422] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915] <4> [876.736433] CPU: 2 PID: 5490 Comm: i915_selftest Tainted: G U W 5.3.0-CI-CI_DRM_6898+ #1 <4> [876.736435] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4> [876.736436] RIP: 0010:__list_del_entry_valid+0x79/0x90 <4> [876.736438] Code: 0b 31 c0 c3 48 89 fe 48 c7 c7 30 34 0e 82 e8 ae 49 bc ff 0f 0b 31 c0 c3 48 89 f2 48 89 fe 48 c7 c7 68 34 0e 82 e8 97 49 bc ff <0f> 0b 31 c0 c3 48 c7 c7 a8 34 0e 82 e8 86 49 bc ff 0f 0b 31 c0 c3 <4> [876.736439] RSP: 0018:ffffc900003ef758 EFLAGS: 00010086 <4> [876.736440] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000002 <4> [876.736442] RDX: 0000000080000002 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [876.736443] RBP: ffffc900003ef780 R08: 0000000000000000 R09: 0000000000000001 <4> [876.736444] R10: 000000001418e4b7 R11: 000000007f0ea93b R12: ffff888361ffcab8 <4> [876.736445] R13: ffff88843b6d0000 R14: 000000000000217c R15: 0000000000000001 <4> [876.736447] FS: 00007f4e6f255240(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000 <4> [876.736448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [876.736449] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0 <4> [876.736450] PKRU: 55555554 <4> [876.736451] Call Trace: <4> [876.736488] i915_request_retire+0x224/0x8e0 [i915] <4> [876.736521] i915_request_create+0x4b/0x1b0 [i915] <4> [876.736550] nop_virtual_engine+0x230/0x4d0 [i915] Fixes: 22b7a426 ("drm/i915/execlists: Preempt-to-busy") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111695Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190918145453.8800-1-chris@chris-wilson.co.uk
-
Daniele Ceraolo Spurio authored
Our assumption that the we can ask the HW to lock the SFC even if not currently in use does not match the HW commitment. The expectation from the HW is that SW will not try to lock the SFC if the engine is not using it and if we do that the behavior is undefined; on ICL the HW ends up to returning the ack and ignoring our lock request, but this is not guaranteed and we shouldn't expect it going forward. Also, failing to get the ack while the SFC is in use means that we can't cleanly reset it, so fail the engine reset in that scenario. v2: drop rmw change, keep the log as debug and handle failure (Chris), improve comments (Tvrtko). Reported-by:Owen Zhang <owen.zhang@intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Acked-by:
-
- 18 Sep, 2019 2 commits
-
-
Chris Wilson authored
A few times in CI, we have detected a GPU hang on our Haswell GT2 systems with the characteristic IPEHR of 0x780c0000. When the PSMI w/a was first introducted, it was applied to all Haswell, but later on we found an erratum that supposedly restricted the issue to GT1 and so constrained it only be applied on GT1. That may have been a mistake... Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111692 Fixes: 167bc759 ("drm/i915: Restrict PSMI context load w/a to Haswell GT1") References: 2c550183 ("drm/i915: Disable PSMI sleep messages on all rings around context switches") Signed-off-by:
-
Matt Roper authored
The CMP PCH ID we have in the driver is correct for the CML-U machines we have in our CI system, but the CML-S and CML-H CI machines appear to use a different PCH ID, leading our driver to detect no PCH for them. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> References: 729ae330 ("drm/i915/cml: Introduce Comet Lake PCH") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111461Signed-off-by:
-
- 17 Sep, 2019 2 commits
-
-
Chris Wilson authored
On Tigerlake, MI_SEMAPHORE_WAIT grew an extra dword, so be sure to update the length field and emit that extra parameter and any padding noop as required. v2: Define the token shift while we are adding the updated MI_SEMAPHORE_WAIT v3: Use int instead of bool in the addition so that readers are not left wondering about the intricacies of the C spec. Now they just have to worry what the integer value of a boolean operation is... Signed-off-by:
-
Chris Wilson authored
If we try to clear, or even set, a bit in the register that doesn't change the register state; skip the write. There's a slight danger in that the register acts as a latch-on-write, but I do not think we use a rmw cycle with any such latch registers. Suggested-by:
-
- 16 Sep, 2019 7 commits
-
-
Chris Wilson authored
Include the active context register state when dumping the engine. Suggested-by:
Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190915203701.29163-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Stop setting ->pipe_mask to zero when display is disabled, allowing us to have different code paths for not actually having display hardware, and having display hardware disabled. This lets us develop those two avenues independently. There are no functional changes for when there is no display. However, all uses of for_each_pipe() and for_each_pipe_masked() will start running for the disabled display case. Put one of the more significant ones behind checks for INTEL_DISPLAY_ENABLED(), otherwise the cases should not be hit with disabled display, or they seem benign. Fingers crossed. All in all, this might not be the ideal solution. In fact we may have had something along the lines of this in the past, but we ended up conflating the two cases. Possibly even by recommendation by yours truly; I did not dare dig up that part of the history. But the perfect is the enemy of the good, this is a straightforward change, and lets us get actual work done in both fronts without interfering with each other. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190916092901.31440-1-jani.nikula@intel.com
-
Ville Syrjälä authored
Clean up the mess with the drm vs. intel types in intel_crtc_atomic_check() and rename varibles accordingly. Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-5-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Exfiltrate the cdclk code from intel_modeset_checks() into intel_modeset_calc_cdclk(). Reviewed-by:
-
Ville Syrjälä authored
Bspec says that glk+ max downscale factor is <3.0 for all pixel formats. Older platforms had a max of <2.0 for NV12. Update the code to deal with this. Reviewed-by:
-
Ville Syrjälä authored
There's a helper in drm_fourcc.h these days to check of we're dealing with a two plane YUV format. Make use if it. Also s/plane/color_plane/ in skl_plane_relative_data_rate() to reduce the confusion. Reviewed-by:
-
Jani Nikula authored
Prepare for making a distinction between not having display and having disabled display. Add INTEL_DISPLAY_ENABLED() and use it where HAS_DISPLAY() is used after intel_device_info_runtime_init(). This is initially duplication, as disabling display still leads to ->pipe_mask = 0 and HAS_DISPLAY() being false. Note that ever since i915.display_disable was introduced, it has not affected PCH detection even if it uses HAS_DISPLAY(), as display disable happens after that. Since INTEL_DISPLAY_ENABLED() will not make sense unless HAS_DISPLAY() is true, include a warning for catching misuses making decisions on INTEL_DISPLAY_ENABLED() when HAS_DISPLAY() is false. v2: Remove INTEL_DISPLAY_ENABLED() check from intel_detect_pch() (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
- 13 Sep, 2019 8 commits
-
-
Mika Kuoppala authored
We think that we got rc6 problems sorted out. Flip the switch and let CI expose our tendency to naive optimism. Signed-off-by:
-
Michel Thierry authored
The media ranges extend beyond what gen11 gives so we can't piggypack on gen11 ranges, even on read side. Introduce a table for gen12 and accessors for it. v2: correctly implement gen12_fwtable_write/read (Daniele) v3: update with ranges from bspec. v4: avoid GEN11_NEEDS_FORCEWAKE (Mika) v5: bspec ref (Daniele) BSpec: 52078 Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
Mika Kuoppala authored
Daniele noticed new render ranges in Gen11 fw table. Bspec: 18331 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Chris Wilson authored
More pruning away of features until we have a stable system and a basis for debugging what's missing. v2: Fixup vdbox/vebox fusing Signed-off-by:
-
Chris Wilson authored
While srcu may use an integer tag, it does not exclude potential error codes and so may overlap with our own use of -EINTR. Use a separate outparam to store the tag, and report the error code separately. Fixes: 2caffbf1 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset") Signed-off-by:
-
Manasi Navare authored
On ICL+, the max supported plane height is 4320, so bump it up To support 4320, we need to increase the number of bits used to read plane_height to 13 as opposed to older 12 bits. v4: * Adjust the width mask also since extra bits are mbz (Ville) v3: * Use 0xffff for mask as extra bits are mbz (Ville) v2: * ICL plane height supported is 4320 (Ville) * Add a new line between max width and max height (Jose) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Manasi Navare authored
On ICL+, the vertical limits for the transcoders are increased to 8192 and horizontal limits are bumped to 16K so bump up limits in intel_mode_valid() v4: * Increase the hdisplay to 16K (Ville) v3: * Supported starting ICL (Ville) * Use the higher limits from TRANS_VTOTAL register (Ville) v2: * Checkpatch warning (Manasi) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
As we remove the struct_mutex protection from around the vma pinning, counters need to be atomic and aware that there may be multiple threads simultaneously active. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190913064200.24297-1-chris@chris-wilson.co.uk
-
- 12 Sep, 2019 13 commits
-
-
Chris Wilson authored
Keep the engine awake to ensure that we don't inject any pm-idle requests. References: https://bugs.freedesktop.org/show_bug.cgi?id=111108Signed-off-by:
-
Arkadiusz Hiler authored
Without it we get: Unclaimed read from register 0x1e1110 WARNING: CPU: 2 PID: 1029 at drivers/gpu/drm/i915/intel_uncore.c:1101 __unclaimed_reg_debug+0x40/0x50 [i915] Call Trace: fwtable_read32+0x233/0x300 [i915] i915_interrupt_info+0xa73/0xd60 [i915] seq_read+0xdb/0x3c0 full_proxy_read+0x51/0x80 vfs_read+0x9e/0x160 ksys_read+0x8f/0xe0 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109824Signed-off-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by:
-
Chris Wilson authored
We see failures where the context continues executing past a preemption event, eventually leading to situations where a request has executed before we have event submitted it to HW! It seems like tgl is ignoring our RING_TAIL updates, but more likely is that there is a missing update required for our semaphore waits around preemption. v2: And disable internal semaphore usage Signed-off-by:
-
Chris Wilson authored
As we track when we put the GT device to sleep upon idling, we can use that callback to sample the current rc6 counters and record the timestamp for estimating samples after that point while asleep. v2: Stick to using ktime_t v3: Track user_wakerefs that interfere with the new intel_gt_pm_wait_for_idle v4: No need for parked/unparked estimation if !CONFIG_PM v5: Keep timer park/unpark logic as was v6: Refactor duplicated estimate/update rc6 logic v7: Pull intel_get_pm_get_if_awake() out from the pmu->lock. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010Signed-off-by:
-
Jani Nikula authored
Replace device info number of pipes with a bit mask of available pipes. This will prove handy in the future. There's still a bunch of future work to do to actually allow a non-consecutive mask of pipes, but it's a start. No functional changes. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Since d0aa694b ("drm/i915/pmu: Always sample an active ringbuffer") the cost of sampling the engine state on execlists platforms became a little bit higher when both engine busyness and one of the wait states are being monitored. (Previously the busyness sampling on legacy platforms was done via seqno comparison so there was no cost of mmio read.) We can avoid that by skipping busyness sampling when engine supports software busy stats and so avoid the cost of potential mmio read and sample accumulation. Signed-off-by:
-
Chris Wilson authored
After we manipulate the context to allow replay after a GPU reset, force that context to be reloaded. This should be a layer of paranoia, for if the GPU was reset, the context will no longer be resident! Signed-off-by:
-
Chris Wilson authored
After a GPU reset, we need to drain all the CS events so that we have an accurate picture of the execlists state at the time of the reset. Be paranoid and force a read of the CSB write pointer from memory. Signed-off-by:
-
Chris Wilson authored
The FBC requires a couple of contiguous buffers, which we allocate from stolen memory. If stolen memory is unavailable, we cannot allocate those buffers and so cannot support FBC. Mark it so. Signed-off-by:
-
Ville Syrjälä authored
Reuse the same .modeset_calc_cdclk() function for all bxt+. The only difference in between the cnl/icl and the bxt variants is the call to cnl_compute_min_voltage_level(). We can do that call just fine on older platforms since they leave min_voltage_level[] zeroed. Let's rename the function to bxt_compute_min_voltage_level() just so it stays consistent with the rest of the naming scheme. Signed-off-by:
-
Ville Syrjälä authored
The cnl and icl .modeset_calc_cdclk() functions are identical. Drop one copy. Signed-off-by:
-
Ville Syrjälä authored
We're forgetting to mask off all three pipe select bits from the CDCLK_CTL value on icl+ which may lead to the extra bit being left in. That will cause us to consider the current hardware cdclk state as invalid, and we proceed to sanitize it even though the hardware may have active pipes and whatnot. Fix up the mask so we get rid of all three pipe select bits and thus hopefully no longer sanitize cdclk when it's already correctly programmed. Cc: Matt Roper <matthew.d.roper@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111641 Fixes: 0c1279b5 ("drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk") Signed-off-by:
-
Ville Syrjälä authored
On tgl/bxt/glk the cdclk bypass frequency depends on the PLL reference clock. So let's read out the ref clock before we try to compute the bypass clock. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 71dc367e ("drm/i915: Consolidate bxt/cnl/icl cdclk readout") Signed-off-by:
-
- 11 Sep, 2019 2 commits
-
-
Jani Nikula authored
Abstract away direct access to ->num_pipes to allow further refactoring. No functional changes. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
There's no easy way of checking whether iommu is enabled for the GPU (you can grep dmesg if you know the device, or you can grep i915_gpu_info if that's available). We do have a central i915_capabilities with the intent of listing such pertinent information, so add the iommu status. Suggested-by:
Martin Peres <martin.peres@linux.intel.com> Signed-off-by:
-
