- 21 Jun, 2015 1 commit
-
-
Paul Gortmaker authored
This driver leaks out into arch/parisc builds that don't have CONFIG_GENERIC_CLOCKEVENTS, leading to the following (truncated) wreckage: CC drivers/clocksource/timer-stm32.o drivers/clocksource/timer-stm32.c:38:28: error: field 'evtdev' has incomplete type drivers/clocksource/timer-stm32.c:44:19: warning: 'enum clock_event_mode' declared inside parameter list drivers/clocksource/timer-stm32.c:44:19: warning: its scope is only this definition or declaration, which is probably not what you want drivers/clocksource/timer-stm32.c:43:62: error: parameter 1 ('mode') has incomplete type drivers/clocksource/timer-stm32.c:43:13: error: function declaration isn't a prototype drivers/clocksource/timer-stm32.c: In function 'stm32_clock_event_set_mode': drivers/clocksource/timer-stm32.c:47:3: error: type defaults to 'int' in declaration of '__mptr' drivers/clocksource/timer-stm32.c:47:3: warning: initialization from incompatible pointer type drivers/clocksource/timer-stm32.c:51:7: error: 'CLOCK_EVT_MODE_PERIODIC' undeclared (first use in this function) drivers/clocksource/timer-stm32.c:51:7: note: each undeclared identifier is reported only once for each function it appears in drivers/clocksource/timer-stm32.c:56:7: error: 'CLOCK_EVT_MODE_ONESHOT' undeclared (first use in this function) Tighten up the dependencies to limit where it gets built by copying the style of the Kconfig line for CLKSRC_EFM32 a few lines above. Signed-off-by:Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1434841352-24300-1-git-send-email-paul.gortmaker@windriver.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- 19 Jun, 2015 7 commits
-
-
Thomas Gleixner authored
If nohz is disabled on the kernel command line the [hr]timer code still calls wake_up_nohz_cpu() and tick_nohz_full_cpu(), a pretty pointless exercise. Cache nohz_active in [hr]timer per cpu bases and avoid the overhead. Before: 48.10% hog [.] main 15.25% [kernel] [k] _raw_spin_lock_irqsave 9.76% [kernel] [k] _raw_spin_unlock_irqrestore 6.50% [kernel] [k] mod_timer 6.44% [kernel] [k] lock_timer_base.isra.38 3.87% [kernel] [k] detach_if_pending 3.80% [kernel] [k] del_timer 2.67% [kernel] [k] internal_add_timer 1.33% [kernel] [k] __internal_add_timer 0.73% [kernel] [k] timerfn 0.54% [kernel] [k] wake_up_nohz_cpu After: 48.73% hog [.] main 15.36% [kernel] [k] _raw_spin_lock_irqsave 9.77% [kernel] [k] _raw_spin_unlock_irqrestore 6.61% [kernel] [k] lock_timer_base.isra.38 6.42% [kernel] [k] mod_timer 3.90% [kernel] [k] detach_if_pending 3.76% [kernel] [k] del_timer 2.41% [kernel] [k] internal_add_timer 1.39% [kernel] [k] __internal_add_timer 0.76% [kernel] [k] timerfn We probably should have a cached value for nohz full in the per cpu bases as well to avoid the cpumask check. The base cache line is hot already, the cpumask not necessarily. Signed-off-by:
-
Thomas Gleixner authored
Eric reported that the timer_migration sysctl is not really nice performance wise as it needs to check at every timer insertion whether the feature is enabled or not. Further the check does not live in the timer code, so we have an extra function call which checks an extra cache line to figure out that it is disabled. We can do better and store that information in the per cpu (hr)timer bases. I pondered to use a static key, but that's a nightmare to update from the nohz code and the timer base cache line is hot anyway when we select a timer base. The old logic enabled the timer migration unconditionally if CONFIG_NO_HZ was set even if nohz was disabled on the kernel command line. With this modification, we start off with migration disabled. The user visible sysctl is still set to enabled. If the kernel switches to NOHZ migration is enabled, if the user did not disable it via the sysctl prior to the switch. If nohz=off is on the kernel command line, migration stays disabled no matter what. Before: 47.76% hog [.] main 14.84% [kernel] [k] _raw_spin_lock_irqsave 9.55% [kernel] [k] _raw_spin_unlock_irqrestore 6.71% [kernel] [k] mod_timer 6.24% [kernel] [k] lock_timer_base.isra.38 3.76% [kernel] [k] detach_if_pending 3.71% [kernel] [k] del_timer 2.50% [kernel] [k] internal_add_timer 1.51% [kernel] [k] get_nohz_timer_target 1.28% [kernel] [k] __internal_add_timer 0.78% [kernel] [k] timerfn 0.48% [kernel] [k] wake_up_nohz_cpu After: 48.10% hog [.] main 15.25% [kernel] [k] _raw_spin_lock_irqsave 9.76% [kernel] [k] _raw_spin_unlock_irqrestore 6.50% [kernel] [k] mod_timer 6.44% [kernel] [k] lock_timer_base.isra.38 3.87% [kernel] [k] detach_if_pending 3.80% [kernel] [k] del_timer 2.67% [kernel] [k] internal_add_timer 1.33% [kernel] [k] __internal_add_timer 0.73% [kernel] [k] timerfn 0.54% [kernel] [k] wake_up_nohz_cpu Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Thomas Gleixner authored
Simplify the handling of the flag storage for the timer statistics. No intermediate storage anymore. Just hand over the flags field. I left the printout of 'deferrable' for now because changing this would be an ABI update and I have no idea how strong people feel about that. OTOH, I wonder whether we should kill the whole timer stats stuff because all of that information can be retrieved via ftrace/perf as well. Signed-off-by:
-
Thomas Gleixner authored
Instead of storing a pointer to the per cpu tvec_base we can simply cache a CPU index in the timer_list and use that to get hold of the correct per cpu tvec_base. This is only used in lock_timer_base() and the slightly larger code is peanuts versus the spinlock operation and the d-cache foot print of the timer wheel. Aside of that this allows to get rid of following nuisances: - boot_tvec_base That statically allocated 4k bss data is just kept around so the timer has a home when it gets statically initialized. It serves no other purpose. With the CPU index we assign the timer to CPU0 at static initialization time and therefor can avoid the whole boot_tvec_base dance. That also simplifies the init code, which just can use the per cpu base. Before: text data bss dec hex filename 17491 9201 4160 30852 7884 ../build/kernel/time/timer.o After: text data bss dec hex filename 17440 9193 0 26633 6809 ../build/kernel/time/timer.o - Overloading the base pointer with various flags The CPU index has enough space to hold the flags (deferrable, irqsafe) so we can get rid of the extra masking and bit fiddling with the base pointer. As a benefit we reduce the size of struct timer_list on 64 bit machines. 4 - 8 bytes, a size reduction up to 15% per struct timer_list, which is a real win as we have tons of them embedded in other structs. This changes also the newly added deferrable printout of the timer start trace point to capture and print all timer->flags, which allows us to decode the target cpu of the timer as well. We might have used bitfields for this, but that would change the static initializers and the init function for no value to accomodate big endian bitfields. Signed-off-by: -
Thomas Gleixner authored
This reduces the size of struct tvec_base by 50% and results in slightly smaller code as well. Before: struct tvec_base: size: 8256, cachelines: 129 text data bss dec hex filename 17698 13297 8256 39251 9953 ../build/kernel/time/timer.o After: struct tvec_base: 4160, cachelines: 65 text data bss dec hex filename 17491 9201 4160 30852 7884 ../build/kernel/time/timer.o Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Joonwoo Park <joonwoop@codeaurora.org> Cc: Wenbo Wang <wenbo.wang@memblaze.com> Link: http://lkml.kernel.org/r/20150526224511.854731214@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
The FIFO guarantee is only there if two timers are queued into the same bucket at the same jiffie on the same cpu: - The slack value depends on the delta between expiry and enqueue time, so the resulting expiry time can be different for timers which are queued in different jiffies. - Timers which are queued into the secondary array end up after a later queued timer which was queued into the primary array due to cascading. - Timers can end up on different cpus due to the NOHZ target moving around. Obviously there is no guarantee of expiry ordering between cpus. So anything which relies on FIFO behaviour of the timer wheel is broken already. This is a preparatory patch for converting the timer wheel to hlist which reduces the memory foot print of the wheel by 50%. It's a seperate patch so any (unlikely to happen) regression caused by this can be identified clearly. Signed-off-by:
-
Thomas Gleixner authored
catchup_timer_jiffies() has been applied blindly to several functions without looking for possible better ways to do it. 1) internal_add_timer() Move the update to base->all_timers before we actually insert the timer into the wheel. 2) detach_if_pending() Again the update to base->all_timers allows us to explicitely do the timer_jiffies update in place, if this was the last timer which got removed. 3) __run_timers() We only check on entry, which is silly, because base->timer_jiffies can be behind - especially on NOHZ kernels - and if there is a single deferrable timer somewhere between base->timer_jiffies and jiffies we expire it and then loop until base->timer_jiffies == jiffies. Move it into the loop. Signed-off-by:
-
- 18 Jun, 2015 8 commits
-
-
Peter Zijlstra authored
Currently an hrtimer callback function cannot free its own timer because __run_hrtimer() still needs to clear HRTIMER_STATE_CALLBACK after it. Freeing the timer would result in a clear use-after-free. Solve this by using a scheme similar to regular timers; track the current running timer in hrtimer_clock_base::running. Suggested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: ktkhai@parallels.com Cc: rostedt@goodmis.org Cc: juri.lelli@gmail.com Cc: pang.xunlei@linaro.org Cc: wanpeng.li@linux.intel.com Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: umgwanakikbuti@gmail.com Link: http://lkml.kernel.org/r/20150611124743.471563047@infradead.orgSigned-off-by:
-
Peter Zijlstra authored
Introduce raw_write_seqcount_barrier(), a new construct that can be used to provide write barrier semantics in seqcount read loops instead of the usual consistency guarantee. raw_write_seqcount_barier() is equivalent to: raw_write_seqcount_begin(); raw_write_seqcount_end(); But avoids issueing two back-to-back smp_wmb() instructions. This construct works because the read side will 'stall' when observing odd values. This means that -- referring to the example in the comment below -- even though there is no (matching) read barrier between the loads of X and Y, we cannot observe !x && !y, because: - if we observe Y == false we must observe the first sequence increment, which makes us loop, until - we observe !(seq & 1) -- the second sequence increment -- at which time we must also observe T == true. Suggested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
I'll shortly be introducing another seqcount primitive that's useful to provide ordering semantics and would like to use the write_seqcount_barrier() name for that. Seeing how there's only one user of the current primitive, lets rename it to invalidate, as that appears what its doing. While there, employ lockdep_assert_held() instead of assert_spin_locked() to not generate debug code for regular kernels. Signed-off-by:
-
Peter Zijlstra authored
A queued hrtimer that gets restarted (hrtimer_start*() while hrtimer_is_queued()) will briefly appear as unqueued/inactive, even though the timer has always been active, we just moved it. Close this hole by preserving timer->state in hrtimer_start_range_ns()'s remove_hrtimer() call. Reported-by:
-
Oleg Nesterov authored
I do not understand HRTIMER_STATE_MIGRATE. Unless I am totally confused it looks buggy and simply unneeded. migrate_hrtimer_list() sets it to keep hrtimer_active() == T, but this is not enough: this can fool, say, hrtimer_is_queued() in dequeue_signal(). Can't migrate_hrtimer_list() simply use HRTIMER_STATE_ENQUEUED? This fixes the race and we can kill STATE_MIGRATE. Signed-off-by:
-
John Stultz authored
In 0c4a5fc9 (Add leap-second timer edge testing to leap-a-day.c), we added a timer to the test which checks to make sure timers near the leapsecond edge behave correctly. However, the output generated from the timer uses ctime_r, which isn't async-signal safe, and should that signal land while the main test is using ctime_r to print its output, its possible for the test to deadlock on glibc internal locks. Thus this patch reworks the output to avoid using ctime_r in the signal handler. Signed-off-by:
John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434565003-3386-1-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
John Stultz authored
The fix in d1518326 (time: Move clock_was_set_seq update before updating shadow-timekeeper) was unfortunately incomplete. The main gist of that change was to do the shadow-copy update last, so that any state changes were properly duplicated, and we wouldn't accidentally have stale data in the shadow. Unfortunately in the main update_wall_time() logic, we update use the shadow-timekeeper to calculate the next update values, then while holding the lock, copy the shadow-timekeeper over, then call timekeeping_update() to do some additional bookkeeping, (skipping the shadow mirror). The bug with this is the additional bookkeeping isn't all read-only, and some changes timkeeper state. Thus we might then overwrite this state change on the next update. To avoid this problem, do the timekeeping_update() on the shadow-timekeeper prior to copying the full state over to the real-timekeeper. This avoids problems with both the clock_was_set_seq and next_leap_ktime being overwritten and possibly the fast-timekeepers as well. Many thanks to Prarit for his rigorous testing, which discovered this problem, along with Prarit and Daniel's work validating this fix. Reported-by:
Prarit Bhargava <prarit@redhat.com> Tested-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
-
Viresh Kumar authored
CLOCK_EVT_MODE_* macros are present for backward compatibility (as most of the drivers are still using old ->set_mode() interface). These macro's shouldn't be used anymore in code, that is common to both driver interfaces, i.e. ->set_mode() and ->set_state_*(). Drivers implementing ->set_state_*() interface, which have their clkevt->mode set to 0 (clkevt device structures are normally globally defined), will not participate in suspend/resume as they will always be marked as UNUSED. Fix this by checking state of the clockevent device instead of mode, which is updated for both the interfaces. Fixes: ac34ad27 ("clockevents: Do not suspend/resume if unused") Signed-off-by:
-
- 12 Jun, 2015 5 commits
-
-
John Stultz authored
Prarit reported an issue w/ timers around the leapsecond, where a timer set for Midnight UTC (00:00:00) might fire a second early right before the leapsecond (23:59:60 - though it appears as a repeated 23:59:59) is applied. So I've updated the leap-a-day.c test to integrate a similar test, where we set a timer and check if it triggers at the right time, and if the ntp state transition is managed properly. Reported-by:
-
John Stultz authored
Since the leapsecond is applied at tick-time, this means there is a small window of time at the start of a leap-second where we cross into the next second before applying the leap. This patch modified adjtimex so that the leap-second is applied on the second edge. Providing more correct leapsecond behavior. This does make it so that adjtimex()'s returned time values can be inconsistent with time values read from gettimeofday() or clock_gettime(CLOCK_REALTIME,...) for a brief period of one tick at the leapsecond. However, those other interfaces do not provide the TIME_OOP time_state return that adjtimex() provides, which allows the leapsecond to be properly represented. They instead only see a time discontinuity, and cannot tell the first 23:59:59 from the repeated 23:59:59 leap second. This seems like a reasonable tradeoff given clock_gettime() / gettimeofday() cannot properly represent a leapsecond, and users likely care more about performance, while folks who are using adjtimex() more likely care about leap-second correctness. Signed-off-by:
-
John Stultz authored
Currently, leapsecond adjustments are done at tick time. As a result, the leapsecond was applied at the first timer tick *after* the leapsecond (~1-10ms late depending on HZ), rather then exactly on the second edge. This was in part historical from back when we were always tick based, but correcting this since has been avoided since it adds extra conditional checks in the gettime fastpath, which has performance overhead. However, it was recently pointed out that ABS_TIME CLOCK_REALTIME timers set for right after the leapsecond could fire a second early, since some timers may be expired before we trigger the timekeeping timer, which then applies the leapsecond. This isn't quite as bad as it sounds, since behaviorally it is similar to what is possible w/ ntpd made leapsecond adjustments done w/o using the kernel discipline. Where due to latencies, timers may fire just prior to the settimeofday call. (Also, one should note that all applications using CLOCK_REALTIME timers should always be careful, since they are prone to quirks from settimeofday() disturbances.) However, the purpose of having the kernel do the leap adjustment is to avoid such latencies, so I think this is worth fixing. So in order to properly keep those timers from firing a second early, this patch modifies the ntp and timekeeping logic so that we keep enough state so that the update_base_offsets_now accessor, which provides the hrtimer core the current time, can check and apply the leapsecond adjustment on the second edge. This prevents the hrtimer core from expiring timers too early. This patch does not modify any other time read path, so no additional overhead is incurred. However, this also means that the leap-second continues to be applied at tick time for all other read-paths. Apologies to Richard Cochran, who pushed for similar changes years ago, which I resisted due to the concerns about the performance overhead. While I suspect this isn't extremely critical, folks who care about strict leap-second correctness will likely want to watch this. Potentially a -stable candidate eventually. Originally-suggested-by:
Richard Cochran <richardcochran@gmail.com> Reported-by:
-
John Stultz authored
Currently the leapsecond logic uses what looks like magic values. Improve this by defining SECS_PER_DAY and using that macro to make the logic more clear. Signed-off-by:
-
John Stultz authored
It was reported that 868a3e91 (hrtimer: Make offset update smarter) was causing timer problems after suspend/resume. The problem with that change is the modification to clock_was_set_seq in timekeeping_update is done prior to mirroring the time state to the shadow-timekeeper. Thus the next time we do update_wall_time() the updated sequence is overwritten by whats in the shadow copy. This patch moves the shadow-timekeeper mirroring to the end of the function, after all updates have been made, so all data is kept in sync. (This patch also affects the update_fast_timekeeper calls which were also problematically done prior to the mirroring). Reported-and-tested-by:
Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by:
-
- 10 Jun, 2015 3 commits
-
-
Joe Perches authored
clocksource messages aren't prefixed in dmesg so it's a bit unclear what subsystem emits the messages. Use pr_fmt and pr_<level> to auto-prefix the messages appropriately. Miscellanea: o Remove "Warning" from KERN_WARNING level messages o Align "timekeeping watchdog: " messages o Coalesce formats o Align multiline arguments Signed-off-by:
Joe Perches <joe@perches.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1432579795.2846.75.camel@perches.comSigned-off-by:
-
Nicholas Mc Guire authored
To allow constant folding in usecs_to_jiffies() conditionally calls the HZ dependent _usecs_to_jiffies() helpers or, when gcc can not figure out constant folding, __usecs_to_jiffies, which is the renamed original usecs_to_jiffies() function. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Joe Perches <joe@perches.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Andrew Hunter <ahh@google.com> Cc: Paul Turner <pjt@google.com> Cc: Michal Marek <mmarek@suse.cz> Link: http://lkml.kernel.org/r/1432832996-12129-2-git-send-email-hofrat@osadl.orgSigned-off-by:
-
Nicholas Mc Guire authored
Refactor the usecs_to_jiffies conditional code part in time.c and jiffies.h putting it into conditional functions rather than #ifdefs to improve readability. This is analogous to the msecs_to_jiffies() cleanup in commit ca42aaf0 ("time: Refactor msecs_to_jiffies") Signed-off-by:
-
- 08 Jun, 2015 1 commit
-
-
Borislav Petkov authored
... in the !CONFIG_HIGH_RES_TIMERS case too. And thus fix warnings like this one: net/sched/sch_api.c: In function ‘psched_show’: net/sched/sch_api.c:1891:6: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘long int’ [-Wformat=] (u32)NSEC_PER_SEC / hrtimer_resolution); Signed-off-by:Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1433583000-32090-1-git-send-email-bp@alien8.deSigned-off-by:
-
- 02 Jun, 2015 15 commits
-
-
Thomas Gleixner authored
Merge branch 'clockevents/4.2' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clockevents/clocksource changes from Daniel Lezcano: - Removed dead code in the files related to mach-msm for qcom (Stephen Boyd) - Cleaned up code for exynos_mct (Krzysztof Kozlowski) - Added the new timer lpc3220 (Joachim Eastwood) - Added the new timer STM32 and ARM system timer (Maxime Coquelin)
-
Thomas Gleixner authored
The only sensible way to make abuse of core internal fields obvious and easy to grep for. Signed-off-by: -
Thomas Gleixner authored
Signed-off-by: -
Thomas Gleixner authored
We want to rename dev->state, so provide proper get and set functions. Rename clockevents_set_state() to clockevents_switch_state() to avoid confusion. Signed-off-by: -
Viresh Kumar authored
Use accessor functions to check the state of clockevent devices in core code. Signed-off-by:
-
Viresh Kumar authored
Some clockevent drivers, once migrated to use per-state callbacks, need to check the state of the clockevent device in their callbacks or interrupt handler. Add accessor functions clockevent_state_*() to get this information. Signed-off-by:
-
Maxime Coquelin authored
This patch fixes below warning spotted by kbuild test robot when building with ARCH=powerpc: drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init': >> drivers/clocksource/timer-stm32.c:140:9: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~0UL, data->base + TIM_ARR); The fix consists in using 0U instead of 0UL. Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org>
-
Maxime Coquelin authored
STM32 MCUs feature 16 and 32 bits general purpose timers with prescalers. The drivers detects whether the time is 16 or 32 bits, and applies a 1024 prescaler value if it is 16 bits. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Maxime Coquelin authored
This adds documentation of device tree bindings for the STM32 timer. Tested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Maxime Coquelin authored
This patch adds clocksource support for ARMv7-M's System timer, also known as SysTick. Tested-by:
-
Maxime Coquelin authored
This adds documentation of device tree bindings for the ARM System timer. Tested-by:
-
Joachim Eastwood authored
Add DT bindings documentation for lpc3220-timer. This timer is used as clocksource on many NXP platforms. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Joachim Eastwood authored
Add support for using the NXP LPC timer as clocksource and clock event. These timers are present on many NXP devices including LPC32xx, LPC17xx, LPC18xx and LPC43xx. The timer has a 32-bit timer counter register with a programmable 32-bit prescaler. It supports up to 4 compare match values with interrupt generation and reset/stop timer counter action. Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by:
-
Krzysztof Kozlowski authored
Since commit 228e3023 ("Merge tag 'mct-exynos-for-v3.10' of ...") the mct_init() was superseded by mct_init_dt() and is not referenced anywhere. Remove it. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The struct clocksource 'mct_frc' is not exported and used outside so make it static. Signed-off-by:
-
