- 26 Apr, 2016 21 commits
-
-
John L. Hammond authored
In the LL_IOC_HSM_CT_START case of ll_dir_ioctl() require CAP_SYS_ADMIN, since the local handler for this ioctl may modify the global KUC table. Signed-off-by:
John L. Hammond <john.hammond@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3866 Reviewed-on: http://review.whamcloud.com/7565Reviewed-by:
Aurelien Degremont <aurelien.degremont@cea.fr> Reviewed-by:
Faccini Bruno <bruno.faccini@intel.com> Reviewed-by:
Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andriy Skulysh authored
Patch for LU-631 which was landed before the upstream merge broke OBD_STATFS_NODELAY behaviour. It adds unnecessary delay while running df command with inactive OSTs. We shouldn't try to recover connection to OST in this case. Signed-off-by:
Andriy Skulysh <Andriy_Skulysh@xyratex.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4010 Reviewed-on: http://review.whamcloud.com/7762Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Reviewed-by:
-
Bruno Faccini authored
Since st_blocks = NULL is returned for released files, FIEMAP should at least return a minimal mapping to make users aware that file contains data but it is not immediately available. This will make coreutils and tools such tar happy and have them presume file is sparse. Also, add a new test_228 in sanity-hsm to verify it works for "[cp,tar] --sparse" commands. Also fix a LBUG ("lov_fiemap()) ASSERTION( fm_local ) failed") likely to occur when no-object/ENOMEM conditions and also now when released. Signed-off-by: -
Andrew Perepechko authored
This patch implements log2 using fls. Signed-off-by:
Andrew Perepechko <andrew_perepechko@xyratex.com> Reviewed-by:
Alexander Boyko <Alexander_Boyko@xyratex.com> Reviewed-by: alexander_zarochentsev@xyratex.com Reviewed-by:
Vitaly Fertman <Vitaly_Fertman@xyratex.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3496 Xyratex-bug-id: MRP-999 Reviewed-on: http://review.whamcloud.com/6757Reviewed-by:
Bob Glossman <bob.glossman@intel.com> Reviewed-by:
-
Jinshan Xiong authored
Otherwise it will hit the assertion at cl_lock.c: cl_lock.c:1967:discard_cb()) ASSERTION( (!(page->cp_type == CPT_CACHEABLE) || (!PageWriteback(cl_page_vmpage(env, page)))) ) failed: This is because in osc_lock_flush() we have to make sure the IO is finished before discarding the pages. Signed-off-by:
Bobi Jam <bobijam@gmail.com> Reviewed-by:
-
Jinshan Xiong authored
Truncate up is safe so it won't trigger restore. Copy optimization for truncate down - only copy the part under truncate length. If a file is truncated to zero usually it'll be followed by write so I choose to restore the file and set correct stripe information. Signed-off-by:
jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr> Reviewed-by:
Henri Doreau <henri.doreau@cea.fr> Reviewed-by:
-
Swapnil Pimpale authored
This patch has the following: 1) Fix for the return value from ptlrpcd_init(). It will now return a correct status instead of returning zero always. 2) ptlrpcd_addref() should not increment ptlrpcd_users on error. 3) Added code in a mdc_setup() and mgc_setup() to test the return value of ptlrpcd_addref() and return on error. Signed-off-by:
Swapnil Pimpale <spimpale@ddn.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3808 Reviewed-on: http://review.whamcloud.com/7522Reviewed-by:
-
Bobi Jam authored
If we specify multiple --mgsnode for a MDT, when we start MDS upon it while MGS is no the other node, the MGC import connection will always select the local nid (which is one of the candidate mgsnode) since it think its the closest connection. This patch treats further --mgsnode nids as failover nids, so that multiple import connections are added for the MGC import. Signed-off-by:
Bobi Jam <bobijam.xu@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3829 Reviewed-on: http://review.whamcloud.com/7509Reviewed-by:
Liang Zhen <liang.zhen@intel.com> Reviewed-by:
Lai Siyao <lai.siyao@intel.com> Reviewed-by:
-
Jinshan Xiong authored
The root cause is that when max_cache_mb conf parameter is applied, the client isn't connected to the OST yet so that sbi->ll_dt_exp is NULL. However, it's not necessary to shrink the cache memory in this case so success should be returned. Signed-off-by:
-
Andrew Perepechko authored
Assume dchild argument is fully initialized in ->unlink and ->rmdir callbacks, so additional lookup for ELC is not needed. Signed-off-by:
Fan Yong <fan.yong@intel.com> Reviewed-by:
-
Andrew Perepechko authored
With the patch 6648 a fee variables were renamed. We do these renames in broken out patch to the fix obvious. Signed-off-by:
-
Bruno Faccini authored
Follow-on to patch introduced to fix LU-2665 ticket (Gerrit Change at http://review.whamcloud.com/6415 with Change-Id: I8faa331712abeadee46eabe111ee1c23a05840d5). Original patch introduced regressions against POSIX test suite (fcntl.18/fcntl.35 tests in LSB-VSX POSIX test suite at http://www.opengroup.org/testing/linux-test/lsb-vsx.html), so the idea is to only resend F_UNLCKs to have both LU-2665 bug and POSIX test suite happy. Signed-off-by:
-
Bruno Faccini authored
Protect against race where lock could have been just destroyed due to overlap, in ldlm_process_flock_lock(). Easy reproducer is BULL's NFS Locktests in pthread mode. (http://nfsv4.bullopensource.org/tools/tests/locktest.php) Signed-off-by:
-
Niu Yawei authored
Fixed several incorrect assumptions in 'enable-invariants'. Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3521 Reviewed-on: http://review.whamcloud.com/6832Reviewed-by:
-
Sebastien Buisson authored
Fix 'data race condition' defects found by Coverity version 6.5.0: Data race condition (MISSING_LOCK) Accessing variable without holding lock. Elsewhere, this variable is accessed with lock held. This patch is dedicated to code fragments involving oap_lock. Signed-off-by:
Sebastien Buisson <sbuisson@ddn.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744 Reviewed-on: http://review.whamcloud.com/6572Reviewed-by:
-
Bobi Jam authored
Current CLIO does not support fadvise, suppress the error message. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
Oleg Drokin authored
This patch fixes all checkpatch occurences of CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Blank lines aren't necessary before a close brace '}' in Lustre code. Signed-off-by: -
Aleksei Fedotov authored
Fix libcfs_ioctl() prototype according to its definition in libcfs/module.c. Signed-off-by:
Aleksei Fedotov <lexa@cfotr.com> Acked-by:
-
James Simmons authored
Change all the wire protocol typedefs to proper structures Signed-off-by:
-
James Simmons authored
Turn typedef lstcon_test_t to proper structure Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.7b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: 2nd set of new device support, features and cleanup for IIO in the 4.7 cycle. Bit of a bumper set for new drivers but plenty of other stuff here as well! New device support * ad5592R ADC/DAC - new driver supporting ad5592r and ad5593r combined ADC/DAC and gpio chips. * Aosong am2315 relative humidity - new driver with triggered buffer support in follow up patch. * bmi160 imu - new driver * bmp280 - bmp180 support - note there is support in the misc/bmp085 driver. Intent is to remove that driver long term. * invensense mpu6050 - cleanup leading to explicit support of mpu9150 with a good few cleanups along the way. * Hope RF hp03 pressure and temperature sensor. - new driver * maxim DS1803 potentiometer - new driver * maxim max44000 light and proximity sensor - new driver built in a series of steps to support pretty much everything. * ROHM BH1780 light sensor - new driver. There is an existing driver in misc that this is pretty much intended to replace. The discussion on whether to support the non standard interface of that driver is some way is continuing. * st-gyro - lsm9ds0-gyro. The accel/magn side of this will take a while longer as extensions to the st library are needed for cases where two types of sensor share a single i2c address. * ti-adc081c - support the adc101c and adc121c * Vishay VEML6070 UV sensor - new driver. New features * core - devm_ APIs for channel_get and channel_get_all. The first user of these is the generic ADC based thermal driver. As it is going through the thermal tree these will be picked up as a patch to that next cycle as that is how the author preferred to do it. - mounting matrix support. This new core support allows devices to provide to userspace (typically from the device tree) allowing compensation for how the sensor is mounted on the device. First examples are on UAVs but it has a more mundane use on typical phone where the chip may be on the front or the back of the circuit board and soldered at any angle. Includes support for this ABI in ak8975 (which has an older interface, now deprecated) and mpu6050. * tools - add a -a option to enable all available channels in generic_buffer sample. Makes it somewhat easier to use. * adis library and drivers - support manual self test flag clearing. This has technically been broken for a very long time - result is an offset on readings as the applied field is on all the time. * ak8975 - triggered buffer support * bmc150 - spi support (including splitting the driver into core and i2c parts) * bmp280 - oversampling support. * dht11 - improved logging - useful to debug timing issues on this quirky device. * st-sensors - read each channel invidivually as not all support the optimization of reading in bulk. This is technically a fix, but will need to be backported if desired. - support open drain and shared interrupts. * ti-adc081c - triggered buffer support. Cleanups * inkern - white space fix. * ad7606 - use the iio_device_claim_direct_mode call rather than open coding equiv. * ad799x - white space fix. * ad9523 - unsigned -> unsigned int * apds9660 - brace location tidying up. - silence an uninitialized variable warning. * ak8975 - else and brace on same line fix. * at91_adc - white space fixes. * bmc150 - use regmap stored copy of the device pointer rather than having an additional copy. * bmg160 - use regmap stored copy of the device pointer rather than having an additional copy. * hid-sensors - white space fixes. * mcp3422 - white space fix. * mma7455 - use regmap to retrieve the device struct rather than carrying another copy in the private data. * ms_sensors - white space fix. * mxs-lradc - move current bindings out of staging - some will be shortly deprecated but the reality is that we have device trees out there using them so they will need to be supported for some time. They accidentally got left behind when the driver graduated from staging. - white space cleanup. - set INPUT_PROP_DIRECT. - move ts config into a better function. - move the STMP reset out of the ADC init. * vf610_adc - case label indenting fix.
-
- 25 Apr, 2016 7 commits
-
-
Crestez Dan Leonard authored
This device is a package containing a MPU6050-like sensor and an AK8975 magnetometer. The magnetometer component is supported by the existing ak8975 driver. This patch also rephrases the Kconfig descriptions. Signed-off-by:
Crestez Dan Leonard <leonard.crestez@intel.com> Acked-by:
Ge Gao <ggao@invensense.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Crestez Dan Leonard authored
Signed-off-by:
-
Crestez Dan Leonard authored
This can be used to distinguish mpu6500. This is a warning rather than an error because the differences are mostly irrelevant and it's nice to avoid breaking users with slightly incorrect ACPI/DT. Signed-off-by:
-
Crestez Dan Leonard authored
This field was unused and incorrect for mpu6500. Signed-off-by:
-
Crestez Dan Leonard authored
The hw_info array was indexed by enum inv_devices chip_type despite the fact that the enumeration had more members than the array and was ordered differently. The patch cleans this up and adds explicit chip_types to i2c/spi/acpi IDs. It also adds some stricter checks inside the driver core. This happened to work so far because the differences between the supported models are very minor. Signed-off-by:
-
Akinobu Mita authored
This adds ability to control the oversampling ratio of the temperature and pressure measurement for both bmp180 and bmp280. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Vlad Dogaru <vlad.dogaru@intel.com> Cc: Christoph Mair <christoph.mair@gmail.com> Signed-off-by:
-
Akinobu Mita authored
This adds support for the BMP180 to the bmp280 iio driver. The BMP180 has already been supported by misc/bmp085 driver but it doesn't use iio framework. This change adds the kconfig dependency not to be selected both of them in order to avoid any issues. Signed-off-by:
-
- 24 Apr, 2016 8 commits
-
-
Crestez Dan Leonard authored
Signed-off-by:
-
Crestez Dan Leonard authored
This patch exposes ALSTIM as illuminance_integration_time and ALSPGA as illuminance_scale. Changing ALSTIM also changes the number of bits available in the data register. This is handled inside raw value reading because: * It's very easy to shift a few bits * It allows SCALE and INT_TIME to be completely independent controls * Buffer support requires constant scan_type.realbits per-channel Signed-off-by:
-
Crestez Dan Leonard authored
This is exposed as an output channel with "led" as an extend_name. Other sensors also have support for controlling an external LED. It's not clear that simply exposing an undecorated output channel is the correct approach. Signed-off-by:
-
Crestez Dan Leonard authored
The proximity sensor relies on sending pulses to an external IR led and it is disabled by default on powerup. The driver will enable it with a default power setting. Signed-off-by:
-
Crestez Dan Leonard authored
This just adds support for reporting illuminance with default settings. Important default registers are written on probe because the device otherwise lacks a reset function. Signed-off-by:
-
Tiberiu Breana authored
Signed-off-by:
Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by:
-
Tiberiu Breana authored
Add basic support for the Aosong AM2315 relative humidity and ambient temperature sensor. Includes support for raw readings and ACPI detection. Datasheet: http://www.aosong.com/asp_bin/Products/en/AM2315.pdfSigned-off-by:
-
Marek Vasut authored
Add support for HopeRF pressure and temperature sensor. This device uses two fixed I2C addresses, one for storing calibration coefficients and another for accessing the ADC. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Matt Ranostay <mranostay@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
- 23 Apr, 2016 4 commits
-
-
Crestez Dan Leonard authored
This device has an identical interface to other supported sensors and the patch only adds IDs. Signed-off-by:
-
Dan Carpenter authored
It causes a static checker warning if we use "buf" on the failure path so move that inside the if statement. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Gregor Boirie authored
Add a new rotation matrix sysfs attribute compliant with IIO core mounting matrix API. Matrix is retrieved from "in_anglvel_mount_matrix" and "in_accel_mount_matrix" sysfs attributes. It is declared into mpu6050 DTS entry as a "mount-matrix" property. Old interface is kept for backward userspace compatibility and may be retrieved from legacy platform_data mechanism only. Signed-off-by:
Gregor Boirie <gregor.boirie@parrot.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Gregor Boirie authored
Expose a rotation matrix to indicate userspace the chip orientation with respect to the overall hardware system. Matrix is retrieved from "in_mount_matrix". It is declared into ak8975 DTS entry as a "mount-matrix" property. Signed-off-by:
-
