- 03 Oct, 2012 12 commits
-
-
Jacob Keller authored
This patch fixes a development issue that occurred due to invalid modes reported in the ethtool get_ts_info function. The issue is resolved by removing unsupported modes from the Rx supported list. CC: stable <stable@vger.kernel.org> [3.5] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
Driver was enabling PPS interrupt even when user wasn't enabling it via the ptp core. This patch fixes the PPS so that it is only enabled explicitly, and moves the interrupt enabling code into the correct location in the driver Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Stable <stable@vger.kernel.org> [3.5] Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
This patch fixes a bug in the method used for calculating the trigger alignment for SDP0 when enabling a PPS output on the X540. The alignment math wasn't properly taking into account the overflow cyclecounter, and was misaligning the pin triggers so that two X540 devices synced properly had mis-aligned SDP pins. This patch fixes the math to calculate the correct seconds alignment for the PPS signal. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Michael Chan authored
drivers/net/ethernet/broadcom/tg3.c:8121:8: warning: symbol 'i' shadows an earlier one drivers/net/ethernet/broadcom/tg3.c:8003:6: originally declared here drivers/net/ethernet/broadcom/tg3.c:785:5: warning: symbol 'tg3_ape_scratchpad_read' was not declared. Should it be static? drivers/net/ethernet/broadcom/tg3.c:7781:19: warning: Using plain integer as NULL pointer drivers/net/ethernet/broadcom/tg3.c:10231:31: error: bad constant expression Reported-by: Fengguang Wu <fenguang.wu@intel.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antonio Quartulli authored
skb_reset_mac_len() relies on the value of the skb->network_header pointer, therefore we must wait for such pointer to be recalculated before computing the new mac_len value. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
DRV_MODULE_VERSION is smaller than the ->version buffer so the memcpy() copies 1 byte past the end of the string. It's not super harmful, but it makes the static checkers complain. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
When an address is added on loopback (ip -6 a a 2002::1/128 dev lo), a route to fe80::/64 is added in the main table: unreachable fe80::/64 dev lo proto kernel metric 256 error -101 This route does not match any prefix (no fe80:: address on lo). In fact, addrconf_dev_config() will not add link local address because this function filters interfaces by type. If the link local address is added manually, the route to the link local prefix will be automatically added by addrconf_add_linklocal(). Note also, that this route is not deleted when the address is removed. After looking at the code, it seems that addrconf_add_lroute() is redundant with addrconf_add_linklocal(), because this function will add the link local route when the link local address is configured. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
htbegin authored
chan->count is used by rx channel. If the desc count is not updated by the clean up loop in cpdma_chan_stop, the value written to the rxfree register in cpdma_chan_start will be incorrect. Signed-off-by: Tao Hou <hotforest@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The config combination: CONFIG_PCH_GBE=y CONFIG_PCH_PTP=y CONFIG_PTP_1588_CLOCK=m doesn't work, because then you have a built-in kernel object (the PCH_PTP code) referring to symbols in a module (PTP_1588_CLOCK). Fix this like IXGBE, by using "select PTP_1588_CLOCK" instead of a "depends on". Reported-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/miscLinus Torvalds authored
Pull spi updates from Mark Brown: "No framework work here, only a bunch of driver updates of varying sizes: - Factoring out of the core hardware support from the MXS MMC driver by Marek Vasut to allow the hardware to also be used for SPI. - Lots of error handling cleanups from Guenter Roeck - Removal of the existing Tegra driver which is quite comprehensively broken as detailed in the changelog for the removal. - DT suppport for the PL022 and GPIO drivers. - pinctrl support for OMAP and PL022." Pulling from Mark Brown as Grant Likely is still busy moving. * tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits) spi: remove completely broken Tegra driver spi/imx: set the inactive state of the clock according to the clock polarity spi/pl022: get/put resources on suspend/resume spi/pl022: use more managed resources spi/pl022: Devicetree support w/o platform data spi/s3c64xx: Don't free controller_data on non-dt platforms spi: omap2-mcspi: add pinctrl support spi/pl022: adopt pinctrl support spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function spi/gpio: Fix stub for spi_gpio_probe_dt() spi/mxs: Make the SPI block clock speed configurable via DT spi: spi-sh-hspi: drop frees of devm_ alloc'd data spi/pl022: Fix chipselects pointer computation spi: spi-tle62x0: Use module_spi_driver macro mxs/spi: Rework the mxs_ssp_timeout to be more readable mxs/spi: Decrement the DMA/PIO border mxs/spi: Increment the transfer length only if transfer succeeded mxs/spi: Fix issues when doing long continuous transfer spi: spi-gpio: Add DT bindings spi: spi-gpio: store chipselect information in private structure ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull infiniband updates from Roland Dreier: "First batch of InfiniBand/RDMA changes for the 3.7 merge window: - mlx4 IB support for SR-IOV - A couple of SRP initiator fixes - Batch of nes hardware driver fixes - Fix for long-standing use-after-free crash in IPoIB - Other miscellaneous fixes" This merge also removes a new use of __cancel_delayed_work(), and replaces it with the regular cancel_delayed_work() that is now irq-safe thanks to the workqueue updates. That said, I suspect the sequence in question should probably use "mod_delayed_work()". I just did the minimal "don't use deprecated functions" fixup, though. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (45 commits) IB/qib: Fix local access validation for user MRs mlx4_core: Disable SENSE_PORT for multifunction devices mlx4_core: Clean up enabling of SENSE_PORT for older (ConnectX-1/-2) HCAs mlx4_core: Stash PCI ID driver_data in mlx4_priv structure IB/srp: Avoid having aborted requests hang IB/srp: Fix use-after-free in srp_reset_req() IB/qib: Add a qib driver version RDMA/nes: Fix compilation error when nes_debug is enabled RDMA/nes: Print hardware resource type RDMA/nes: Fix for crash when TX checksum offload is off RDMA/nes: Cosmetic changes RDMA/nes: Fix for incorrect MSS when TSO is on RDMA/nes: Fix incorrect resolving of the loopback MAC address mlx4_core: Fix crash on uninitialized priv->cmd.slave_sem mlx4_core: Trivial cleanups to driver log messages mlx4_core: Trivial readability fix: "0X30" -> "0x30" IB/mlx4: Create paravirt contexts for VFs when master IB driver initializes mlx4: Modify proxy/tunnel QP mechanism so that guests do no calculations mlx4: Paravirtualize Node Guids for slaves mlx4: Activate SR-IOV mode for IB ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "A few drivers were updated with device tree bindings and others got a few small cleanups and fixes." Fix trivial conflict in drivers/input/keyboard/omap-keypad.c due to changes clashing with a whitespace cleanup. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: wacom - mark Intuos5 pad as in-prox when touching buttons Input: synaptics - adjust threshold for treating position values as negative Input: hgpk - use %*ph to dump small buffer Input: gpio_keys_polled - fix dt pdata->nbuttons Input: Add KD[GS]KBDIACRUC ioctls to the compatible list Input: omap-keypad - fixed formatting Input: tegra - move platform data header Input: wacom - add support for EMR on Cintiq 24HD touch Input: s3c2410_ts - make s3c_ts_pmops const Input: samsung-keypad - use of_get_child_count() helper Input: samsung-keypad - use of_match_ptr() Input: uinput - fix formatting Input: uinput - specify exact bit sizes on userspace APIs Input: uinput - mark failed submission requests as free Input: uinput - fix race that can block nonblocking read Input: uinput - return -EINVAL when read buffer size is too small Input: uinput - take event lock when fetching events from buffer Input: get rid of MATCH_BIT() macro Input: rotary-encoder - add DT bindings Input: rotary-encoder - constify platform data pointers ...
-
- 02 Oct, 2012 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pinctrl changes from Linus Walleij: "Some of this stuff is hitting arch/arm/* and have been ACKed by the ARM SoC folks, or it's device tree bindings pertaining to the specific driver. These are the bulk pinctrl changes for kernel v3.7: - Add subdrivers for the DB8540 and NHK8815 Nomadik-type ASICs, provide platform config for the Nomadik. - Add a driver for the i.MX35. - Add a driver for the BCM2835, an advanced GPIO expander. - Various fixes and clean-ups and minor improvements for the core, Nomadik, pinctr-single, sirf drivers. - Some platform config for the ux500." * tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (27 commits) pinctrl: add bcm2835 driver pinctrl: clarify idle vs sleep states pinctrl/nomadik: use irq_find_mapping() pinctrl: sirf: add lost chained_irq_enter and exit in sirfsoc_gpio_handle_irq pinctrl: sirf: initialize the irq_chip pointer of pinctrl_gpio_range pinctrl: sirf: fix spinlock deadlock in sirfsoc_gpio_set_input pinctrl: sirf: add missing pins to pinctrl list pinctrl: sirf: fix a typo in sirfsoc_gpio_probe pinctrl: pinctrl-single: add debugfs pin h/w state info ARM: ux500: 8500: update I2C sleep states pinctrl pinctrl: Fix potential memory leak in pinctrl_register_one_pin() ARM: ux500: tidy up pin sleep modes ARM: ux500: fix spi2 pin group pinctrl: imx: remove duplicated const pinctrl: document semantics vs GPIO ARM: ux500: 8500: use hsit_a_2 group for HSI pinctrl: use kasprintf() in pinmux_request_gpio() pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux pinctrl/nomadik : add MC1_a_2 pin MC1 function group list pinctrl: pinctrl-single: Make sure we do not change bits outside of mask ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO changes from Linus Walleij: "So this is the LW GPIO patch stack for v3.7: - refactoring from Thierry Redding at Arnd Bergmann's request to use the seq_file iterator interface in gpiolib. - A new driver for Avionic Design's N-bit GPIO expander. - Two instances of mutexes replaced by spinlocks from Axel Lin to code that is supposed to be fastpath compliant. - IRQ demuxer and gpio_to_irq() support for pcf857x by Kuninori Morimoto. - Dynamic GPIO numbers, device tree support, daisy chaining and some other fixes for the 74x164 driver by Maxime Ripard. - IRQ domain and device tree support for the tc3589x driver by Lee Jones. - Some conversion to use managed resources devm_* code. - Some instances of clk_prepare() or clk_prepare_enable() added to support the new, stricter common clock framework. - Some for_each_set_bit() simplifications. - Then a lot of fixes as we fixed up all of the above tripping over our own shoelaces and that kind of thing." * tag 'gpio-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (34 commits) gpio: pcf857x: select IRQ_DOMAIN gpio: Document device_node's det_debounce gpio-lpc32xx: Add GPI_28 gpio: adnp: dt: Reference generic interrupt binding gpio: Add Avionic Design N-bit GPIO expander support gpio: pxa: using for_each_set_bit to simplify the code gpio_msm: using for_each_set_bit to simplify the code gpio: Enable the tc3298x GPIO expander driver for Device Tree gpio: Provide the tc3589x GPIO expander driver with an IRQ domain ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled gpio: pcf857x: fixup smatch WARNING gpio: 74x164: Add support for the daisy-chaining gpio: 74x164: dts: Add documentation for the dt binding dt: Fix incorrect reference in gpio-led documentation gpio: 74x164: Add device tree support gpio: 74x164: Use dynamic gpio number assignment if no pdata is present gpio: 74x164: Use devm_kzalloc gpio: 74x164: Use module_spi_driver boiler plate function gpio: sx150x: Use irq_data_get_irq_chip_data() at appropriate places gpio: em: Use irq_data_get_irq_chip_data() at appropriate places ...
-
Linus Torvalds authored
The network merge brought in a few users of functions that got deprecated by the workqueue cleanups: the 'system_nrt_wq' is now the same as the regular system_wq, since all workqueues are now non- reentrant. Similarly, remove one use of flush_work_sync() - the regular flush_work() has become synchronous, and the "_sync()" version is thus deprecated as being superfluous. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds authored
Pull sparc updates from David Miller: "Largely this is simply adding support for the Niagara 4 cpu. Major areas are perf events (chip now supports 4 counters and can monitor any event on each counter), crypto (opcodes are availble for sha1, sha256, sha512, md5, crc32c, AES, DES, CAMELLIA, and Kasumi although the last is unsupported since we lack a generic crypto layer Kasumi implementation), and an optimized memcpy. Finally some cleanups by Peter Senna Tschudin." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (47 commits) sparc64: Fix trailing whitespace in NG4 memcpy. sparc64: Fix comment type in NG4 copy from user. sparc64: Add SPARC-T4 optimized memcpy. drivers/sbus/char: removes unnecessary semicolon arch/sparc/kernel/pci_sun4v.c: removes unnecessary semicolon sparc64: Fix function argument comment in camellia_sparc64_key_expand asm. sparc64: Fix IV handling bug in des_sparc64_cbc_decrypt sparc64: Add auto-loading mechanism to crypto-opcode drivers. sparc64: Add missing pr_fmt define to crypto opcode drivers. sparc64: Adjust crypto priorities. sparc64: Use cpu_pgsz_mask for linear kernel mapping config. sparc64: Probe cpu page size support more portably. sparc64: Support 2GB and 16GB page sizes for kernel linear mappings. sparc64: Fix bugs in unrolled 256-bit loops. sparc64: Avoid code duplication in crypto assembler. sparc64: Unroll CTR crypt loops in AES driver. sparc64: Unroll ECB decryption loops in AES driver. sparc64: Unroll ECB encryption loops in AES driver. sparc64: Add ctr mode support to AES driver. sparc64: Move AES driver over to a methods based implementation. ...
-
Haiyang Zhang authored
In some response messages, there may be some extended info after the message. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
The existing code always reports NVSP_STAT_SUCCESS. This patch adds the mechanism to report failure when it happens. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
The receive code path doesn't use the page buffer, so remove the extra allocated space here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
To prevent possible data corruption in RNDIS requests, add another page buffer if the request message crossed page boundary. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
Return ETIMEDOUT when the reply message is not received in time. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
According to RNDIS specs, Windows sets this size to 0x4000. I use the same value here. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Move vxlan UDP socket to correct network namespace Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup hierarchy update from Tejun Heo: "Currently, different cgroup subsystems handle nested cgroups completely differently. There's no consistency among subsystems and the behaviors often are outright broken. People at least seem to agree that the broken hierarhcy behaviors need to be weeded out if any progress is gonna be made on this front and that the fallouts from deprecating the broken behaviors should be acceptable especially given that the current behaviors don't make much sense when nested. This patch makes cgroup emit warning messages if cgroups for subsystems with broken hierarchy behavior are nested to prepare for fixing them in the future. This was put in a separate branch because more related changes were expected (didn't make it this round) and the memory cgroup wanted to pull in this and make changes on top." * 'for-3.7-hierarchy' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: mark subsystems with broken hierarchy support and whine if cgroups are nested for them
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup updates from Tejun Heo: - xattr support added. The implementation is shared with tmpfs. The usage is restricted and intended to be used to manage per-cgroup metadata by system software. tmpfs changes are routed through this branch with Hugh's permission. - cgroup subsystem ID handling simplified. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Define CGROUP_SUBSYS_COUNT according the configuration cgroup: Assign subsystem IDs during compile time cgroup: Do not depend on a given order when populating the subsys array cgroup: Wrap subsystem selection macro cgroup: Remove CGROUP_BUILTIN_SUBSYS_COUNT cgroup: net_prio: Do not define task_netpioidx() when not selected cgroup: net_cls: Do not define task_cls_classid() when not selected cgroup: net_cls: Move sock_update_classid() declaration to cls_cgroup.h cgroup: trivial fixes for Documentation/cgroups/cgroups.txt xattr: mark variable as uninitialized to make both gcc and smatch happy fs: add missing documentation to simple_xattr functions cgroup: add documentation on extended attributes usage cgroup: rename subsys_bits to subsys_mask cgroup: add xattr support cgroup: revise how we re-populate root directory xattr: extract simple_xattr code from tmpfs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
-
Roland Dreier authored
-
Olof Johansson authored
This fixes a local merge conflict resolution done wrong locally in arm-soc for-next. soc.h was added on a cleanup branch, but the driver was moved and the header no longer needed. Signed-off-by: Olof Johansson <olof@lixom.net> [ .. and I did the same wrong merge, since git automatically does the whole rename detection etc, so applying this patch from Olof - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc documentation updates from Olof Johansson: "Documentation update for Marvell SoCs, the secret decoder ring to all their crazy product names and numbers." * tag 'docs' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm: add documentation describing Marvell families of SoC
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc device tree updates, take 2 from Olof Johansson: "This branch contains mostly a set of changes for device tree bindings on Samsung Exynos. It was staged behind the other branches due to dependencies on pincontrol and board changes." Fix up trivial conflict in drivers/clocksource/Makefile due to earlier conflict resolution. * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: Add nodes for dw_mmc controllers for Samsung EXYNOS5250 platforms ARM: EXYNOS: Add AUXDATA support for MSHC controllers ARM: EXYNOS: Add support for MSHC controller clocks ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen ARM: dts: use uart2 for console on smdkv310 and smdk5250 ARM: dts: Add basic dts file for Samsung Trats board ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4 ARM: dts: Assume status of all optional nodes as disabled for exynos4 ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc board specific updates from Olof Johansson: "Misc board updates: - Greg added a handful of boards to KS8695 (since he has stepped up to maintain it). - Qualcomm has added DT-only board support for a couple of their newer SoCs. - misc other updates for Samsung and Freescale boards." Fix up trivial conflict in arch/arm/mach-shmobile/board-armadillo800eva.c due to gpio device data being added next to hdmi device data that got moved. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: msm: Allow 8960 and 8660 to compile together ARM: msm: Allow msm_iomap-8x60 and msm_iomap-8960 to coexist ARM: EXYNOS: Add generic PWM lookup support for SMDKV310 ARM: EXYNOS: Add generic PWM lookup support for SMDK4X12 ARM: EXYNOS: Use generic pwm driver in Origen board ARM: shmobile: armadillo800eva: Add support RTC ARM: ks8695: add board support for the OpenGear boards based on the KS8695 ARM: ks8695: add board support for the SnapGear boards based on the KS8695 ARM: dts: Add heartbeat gpio-leds support to Origen ARM: dts: Use active low flag for gpio-keys on Origen ARM: shmobile: marzen: enable thermal sensor ARM: shmobile: marzen: fixup regulator id for smsc911x ARM: shmobile: marzen: add SDHI0 support ARM: mmp: enable debug uart port in defconfig ARM: mmp: implement DEBUG_LL port choice ARM: S3C64XX: Register audio platform devices for Bells on Cragganmore ARM: S3C64XX: Update configuration for WM5102 module on Cragganmore ARM: mx27pdk: Add audio support ARM: ttc_dkb: add nand support
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc-specific updates, take 2 from Olof Johansson: "This branch converts the MXS Freescale platform to use irqdomains and sparse IRQ, in preparation for DT probing and multiplatform kernels." * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: remove mach/irqs.h ARM: mxs: select SPARSE_IRQ ARM: mxs: adopt irq_domain support for icoll driver ARM: mxs: select MULTI_IRQ_HANDLER ARM: mxs: retrieve timer irq from device tree gpio/mxs: adopt irq_domain support for mxs gpio driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller authored
Ben Hutchings says: ==================== Some bug fixes that should go into 3.7: 1. Fix oops when removing device with SR-IOV enabled. (This regression was introduced by the last set of changes, so the fix does not need to be applied to any earlier kernel versions.) 2. Fix firmware structure field lookup bug that resulted in missing sensor information. 3. Fix bug that makes self-test do very little in some configurations. 4. Fix the numbering of ethtool RX flow steering filters to reflect the real hardware priorities. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc cleanups, part 2 from Olof Johansson: "A shorter cleanup branch submitted separately due to dependencies with some of the previous topics. Major thing here is that the Broadcom bcmring platform is removed. It's an SoC that's used on some stationary VoIP platforms, and is in desperate need of some cleanup. Broadcom came back and suggested that we just deprecate the platform for now, since they aren't going to spend the resources needed on cleaning it up, and there are no users of the platform directly from mainline." Fix some conflicts due to BCM2835 getting added next to the removed BCMRING, and removal of tegra files that had been converted to devicetree. * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses. ARM: ux500: use __iomem pointers for MMIO ARM: Remove mach-bcmring ARM: clps711x: Remove board support for CEIVA ARM: clps711x: Fix register definitions ARM: clps711x: Fix lowlevel debug-macro ARM: clps711x: Added simple clock framework pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl ARM: tegra: delete unused headers ARM: tegra: remove useless includes of <mach/*.h> ARM: tegra: remove dead code
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc device tree updates from Olof Johansson: "Device tree conversion and enablement branch. Mostly a bunch of new bindings and setup for various platforms, but the Via/Winchip VT8500 platform is also converted over from being 100% legacy to now use device tree for probing. More of that will come for 3.8." Trivial conflicts due to removal of vt8500 files, and one documentation file that was added with slightly different contents both here and in the USb tree. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits) arm: vt8500: Fixup for missing gpio.h ARM: LPC32xx: LED fix in PHY3250 DTS file ARM: dt: mmp-dma: add binding file arm: vt8500: Update arch-vt8500 to devicetree support. arm: vt8500: gpio: Devicetree support for arch-vt8500 arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices arm: vt8500: clk: Add Common Clock Framework support video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb serial: vt8500: Add devicetree support for vt8500-serial rtc: vt8500: Add devicetree support for vt8500-rtc arm: vt8500: Add device tree files for VIA/Wondermedia SoC's ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support ARM: tegra: Add Avionic Design Medcom-Wide support ARM: tegra: Add Avionic Design Plutux support ARM: tegra: Add Avionic Design Tamonten support ARM: tegra: dts: Add pwm label ARM: ux500: Fix SSP register address format ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT ARM: ux500: Add all encompassing sound node to the HREF Device Tree ...
-