- 21 Feb, 2017 4 commits
-
-
Tvrtko Ursulin authored
Rename it to i915_gem_request_queue and fix the logged info equivalent to the i915_gem_request even class. Also moved it a bit further apart from the i915_gem_request_add tracepoint since they otherwise provide similar information too close in time. v2: Remove sw fence singalling. We will rely on the soon to come GuC scheduling backend to enable that. (Chris Wilson) v3: Log hex with 0x prefix for clarity. Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Tvrtko Ursulin authored
At the moment only the global seqno is logged which is not set until the request is ready for submission. Add the per-contex seqno and the context hardware id which are both interesting data points. Signed-off-by:
-
Tvrtko Ursulin authored
Compact the name of the macro and reg_state variable, and cache some data in local variables to make the function more compact and more readable. v2: Fixup some checkpatch warnings. Signed-off-by:
-
Chris Wilson authored
Replace the calls to ww_mutex_lock(&resv->lock) with the helper reservation_object_lock(resv) and similarly for unlock. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 20 Feb, 2017 14 commits
-
-
Chris Wilson authored
The hardware requires that the tail pointer only advance in qword units, so assert that the value we write is aligned to qwords, and similarly enforce this restriction onto the request->tail. Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com>
-
Imre Deak authored
Verify that the refcount of all power wells match their HW enabled state at the end of modeset HW state readout. Also add documentation on how the reference count for each power well is supposed to be acquired during initialization and HW state readout. Suggested by Ander. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487345986-26511-6-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Atm, power wells that BIOS has enabled, but which we don't explicitly enable during power domain initialization would get disabled as we clear the BIOS request bit in the given power well sync_hw hook. To prevent this copy over any set request bits in the BIOS request register to the driver request register and clear the BIOS request bit only afterwards. This doesn't make a difference now, since we enable all power wells during power domain initialization. A follow-up patchset will add power wells for which this isn't true, so fix up the inconsistency. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Atm, in the power well sync_hw hook we are clearing all BIOS request bits, not just the one corresponding to the given power well. This could turn off an unrelated power well inadvertently if it didn't have a request bit set in the driver request register. This didn't cause a problem so far, since we enabled all power wells explicitly before clearing the BIOS request register. A follow-up patchset will add power wells that won't get enabled this way, so fix up the inconsistency. Note that this patch only makes the clearing of the BIOS req register more logical. Power wells without a reference would still get disabled by the end of power domain initialization, that is fixed by the next patch. v2: - Clarify in the commit log that this patch doesn't address the case of power wells without a reference. (Ander) Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
So far the sync_hw hook wasn't called for power wells not belonging to any power domain, that is the GEN9 PW1 and MISC_IO power wells. This wasn't a problem so far since the goal of the sync_hw hook - to clear the corresponding BIOS request bit - was guaranteed by clearing the whole BIOS request register elsewhere. This will change with the next patch, so fix up the inconsistency. While at it clean up the power well iterator helpers and move them to the rest of iterators. v2: - Clean up the power well iterator helpers. (Ander) - Move the helpers to i915_drv.h. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Doing an explicit enable/disable in the power well sync_hw hook based on the power well's reference count is redundant, since by the time these hooks are called all the power wells are enabled and have a reference. So remove the redundant toggling. This is needed by a follow-up patchset that adds power wells which we can't enable/disable during power domain initialization and so want to preserve their state until modeset init time. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
The uncached mmio is sufficient to queue the mmio writes without raising forcewake. The forced flush along with acquiring forcewake from the posting read is not required for adjusting the RPS frequency. Signed-off-by:
Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
-
Chris Wilson authored
If intel_set_rps() is called whilst the hw is disabled, just store the requested frequency (from the user) for application when we wake the hw up. Signed-off-by:
-
Chris Wilson authored
Instead of having each back-end provide identical guards, just have a singular set in intel_set_rps() to verify that the caller is obeying the rules. Signed-off-by:
-
Tvrtko Ursulin authored
Pronounces less rude when fixed. Signed-off-by:
-
Chris Wilson authored
Either by chance, or by misread, the current evaluation interval may be zero. If that is the case, don't divide by it! Signed-off-by:
-
Chris Wilson authored
We don't need struct_mutex for acquiring an rpm wakeref, and do not need to serialise those register read (it's the wrong mutex for those registers in any case). Begone! Signed-off-by:
-
Chris Wilson authored
Prevent the overflow check from firing on machines with the full 4lvl page tables, that are not restricted to GEN8_LEGACY_PDES. v2: Also fix the off-by-one in the compare Fixes: 894ccebe ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()") Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Rodrigo Vivi authored
There is a new version of DMC available for Geminilake. It's release notes only mention: - Enhancement in the FW to restore the PG2 state v2: Fixed the platform name on commit message. Noticed by Jani S. v3: cook on top of drm-tip without depending on kbl one so CI can check. v4: make v3 on top of v2. Cc: David Weinehall <tao@kernel.org> Cc: Jani Saarinen <jani.saarinen@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487295515-15396-1-git-send-email-rodrigo.vivi@intel.com
-
- 17 Feb, 2017 12 commits
-
-
Chris Wilson authored
If we wait upon the full (i.e. all shared fences, or upon an exclusive fence) reservation object successfully, we know that all fences beneath it have been signaled, so long as no new fences were added whilst we slept. If the reservation_object remains the same, as detected by its seqcount, we can then reap all the fences upon completion. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-6-chris@chris-wilson.co.uk
-
Chris Wilson authored
As a backup to waiting on a user-interrupt from the GPU, we use a heavy and frequent timer to wake up the waiting process should we detect an inconsistency whilst waiting. After seeing a "missed interrupt", the next time we wait, we restart the heavy timer. This patch is more reluctant to restart the timer and will only do so if we have not see any interrupts since when we started the fake irq timer. If we are seeing interrupts, then the waiters are being woken normally and we had an incoherency that caused to miss last time - that is unlikely to reoccur and so taking the risk of stalling again seems pragmatic. Signed-off-by:
-
Chris Wilson authored
If the waiter was currently running, assume it hasn't had a chance to process the pending interrupt (e.g, low priority task on a loaded system) and wait until it sleeps before declaring a missed interrupt. References: https://bugs.freedesktop.org/show_bug.cgi?id=99816Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217151304.16665-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
If an interrupt has been posted, and we were spinning on the active seqno waiting for it to advance but it did not, then we can expect that it will not see its advance in the immediate future and should call into the irq-seqno barrier. We can stop spinning at this point, and leave the difficulty of handling the coherency to the caller. Signed-off-by:
-
Chris Wilson authored
When the timer expires for checking on interrupt processing, check to see if any interrupts arrived within the last time period. If real interrupts are still being delivered, we can be reassured that we haven't missed the final interrupt as the waiter will still be woken. Only once all activity ceases, do we have to worry about the waiter never being woken and so need to install a timer to kick the waiter for a slow arrival of a seqno. Signed-off-by:
-
Ander Conselvan de Oliveira authored
Now that the pre-csc degamma table is set up correctly in Geminilake, pipe CSC can be enabled without causing a black screen. v2: Rebase. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217120630.6143-3-ander.conselvan.de.oliveira@intel.com
-
Ander Conselvan de Oliveira authored
In Geminilake, the degamma table is enabled or disabled by the pipe CSC enable bit, so its active even when running in the legacy gamma mode. So always set sane values for that table, since the default value is all zeroes. This fixes blank screens after a suspend/resume cycle while legacy gamma is in use. Signed-off-by:
-
Tvrtko Ursulin authored
We have a few open coded instances in the execlists code and an almost suitable helper in intel_ringbuf.c We can consolidate to a single helper if we change the existing helper to emit directly to ring buffer memory and move the space reservation outside it. v2: Drop memcpy for memset. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Use the "*batch++ = " style as in the ring emission for better readability and also simplify the logic a bit by consolidating the offset and size calculations and overflow checking. The latter is a programming error so it is not required to check for it after each write to the object, but rather do it once the whole state has been written and fail the driver if something went wrong. v2: Rebase. v3: Keep track of offsets and sizes in bytes for simplicity and rename function pointer variable to _fn suffix. (Chris Wilson) v4: Fix size calc broken in v3 and add alignment warning. (Chris Wilson) v5: Fix return code. v6: I added an exit from loop in v5 but forgot to put back the object teardown. Signed-off-by: -
Tvrtko Ursulin authored
It is used by all submission backends. Signed-off-by:
-
Tvrtko Ursulin authored
We can call the engine cleanup vfunc instead of duplicating the decision making here. Signed-off-by:
-
Tvrtko Ursulin authored
It is only used within intel_ringbuffer.c Signed-off-by:
Chris Wilson <chris@chris-wilson.oc.uk>
-
- 16 Feb, 2017 10 commits
-
-
Chris Wilson authored
Since the frontbuffer has self-contained locking, it does not require us to hold the BKL struct_mutex as we send invalidate and flush messages. Signed-off-by:
-
Chris Wilson authored
We do not need the BKL struct_mutex in order to allocate a GEM object, nor to create the framebuffer, so resist the temptation to take the BKL willy nilly. As this changes the locking contract around internal API calls, the patch is a little larger than a plain removal of a pair of mutex_lock/unlock. Signed-off-by:
-
Chris Wilson authored
We do not need to hold struct_mutex for destroying drm_i915_gem_objects any longer, and with a little care taken over tracking obj->framebuffer_references, we can relinquish BKL locking around the destroy of intel_framebuffer. v2: Use atomic check for WARN_ON framebuffer miscounting Signed-off-by:
-
Chris Wilson authored
The physical object is treated as permanently pinned. If we fail to take this initial pin during i915_gem_object_attach_phys() we need to revert it back to an ordinary shmemfs object before reporting the failure. v2: git-add Reported-by:
-
Chris Wilson authored
We wait upon jiffies, but report the time elapsed using a high-resolution timer. This discrepancy can lead to us timing out the wait prior to us reporting the elapsed time as complete. This restores the squelching lost in commit e95433c7 ("drm/i915: Rearrange i915_wait_request() accounting with callers"). Fixes: e95433c7 ("drm/i915: Rearrange i915_wait_request() accounting with callers") Signed-off-by:
-
Uma Shankar authored
Disable device ready before MIPI port shutdown command. This helps to avoid mipi split screen issues. Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-8-git-send-email-vidya.srinivas@intel.com
-
Uma Shankar authored
Fix the Sequence to program BXT DSI Latch and ULPS. Signed-off-by:
-
Deepak M authored
Dual link Z-inversion overlap field is present in MIPI_CTRL register unlike the older platforms, hence setting the same in this patch. Signed-off-by:
Deepak M <m.deepak@intel.com> Signed-off-by:
Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
-
sagar.a.kamble@intel.com authored
HUC_STATUS, GUC_STATUS, SOFT_SCRATCH registers are read in debugfs and getparam ioctl. This patch covers those accesses by RPM get/put. v2: Covering access in i915_getparam(I915_PARAM_HUC_STATUS) (ChrisW) Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com> Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by:
Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by:
-
Chris Wilson authored
In order to prevent accessing the hpd registers outside of the display power wells, we should refrain from writing to the registers before the display interrupts are enabled. [ 4.740136] WARNING: CPU: 1 PID: 221 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x44/0x50 [i915] [ 4.740155] Unclaimed read from register 0x1e1110 [ 4.740168] Modules linked in: i915(+) intel_gtt drm_kms_helper prime_numbers [ 4.740190] CPU: 1 PID: 221 Comm: systemd-udevd Not tainted 4.10.0-rc6+ #384 [ 4.740203] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 4.740220] Call Trace: [ 4.740236] dump_stack+0x4d/0x6f [ 4.740251] __warn+0xc1/0xe0 [ 4.740265] warn_slowpath_fmt+0x4a/0x50 [ 4.740281] ? insert_work+0x77/0xc0 [ 4.740355] ? fwtable_write32+0x90/0x130 [i915] [ 4.740431] __unclaimed_reg_debug+0x44/0x50 [i915] [ 4.740507] fwtable_read32+0xd8/0x130 [i915] [ 4.740575] i915_hpd_irq_setup+0xa5/0x100 [i915] [ 4.740649] intel_hpd_init+0x68/0x80 [i915] [ 4.740716] i915_driver_load+0xe19/0x1380 [i915] [ 4.740784] i915_pci_probe+0x32/0x90 [i915] [ 4.740799] pci_device_probe+0x8b/0xf0 [ 4.740815] driver_probe_device+0x2b6/0x450 [ 4.740828] __driver_attach+0xda/0xe0 [ 4.740841] ? driver_probe_device+0x450/0x450 [ 4.740853] bus_for_each_dev+0x5b/0x90 [ 4.740865] driver_attach+0x19/0x20 [ 4.740878] bus_add_driver+0x166/0x260 [ 4.740892] driver_register+0x5b/0xd0 [ 4.740906] ? 0xffffffffa0166000 [ 4.740920] __pci_register_driver+0x47/0x50 [ 4.740985] i915_init+0x5c/0x5e [i915] [ 4.740999] do_one_initcall+0x3e/0x160 [ 4.741015] ? __vunmap+0x7c/0xc0 [ 4.741029] ? kmem_cache_alloc+0xcf/0x120 [ 4.741045] do_init_module+0x55/0x1c4 [ 4.741060] load_module+0x1f3f/0x25b0 [ 4.741073] ? __symbol_put+0x40/0x40 [ 4.741086] ? kernel_read_file+0x100/0x190 [ 4.741100] SYSC_finit_module+0xbc/0xf0 [ 4.741112] SyS_finit_module+0x9/0x10 [ 4.741125] entry_SYSCALL_64_fastpath+0x17/0x98 [ 4.741135] RIP: 0033:0x7f8559a140f9 [ 4.741145] RSP: 002b:00007fff7509a3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.741161] RAX: ffffffffffffffda RBX: 00007f855aba02d1 RCX: 00007f8559a140f9 [ 4.741172] RDX: 0000000000000000 RSI: 000055b6db0914f0 RDI: 0000000000000011 [ 4.741183] RBP: 0000000000020000 R08: 0000000000000000 R09: 000000000000000e [ 4.741193] R10: 0000000000000011 R11: 0000000000000246 R12: 000055b6db0854d0 [ 4.741204] R13: 000055b6db091150 R14: 0000000000000000 R15: 000055b6db035924 v2: Set dev_priv->display_irqs_enabled to true for all platforms other than vlv/chv that manually control the display power domain. Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798Suggested-by:
-
