- 08 Dec, 2006 40 commits
-
-
Raphael Assenat authored
This patch adds a new ioctl range for the mbxfb driver. Signed-off-by:
Raphael Assenat <raph@8d.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Raphael Assenat authored
This patch adds a way to create and use the video plane (YUV overlay) and scaling video scaling features of the chip. The overlay is configured, resized and modified using a device specific ioctl. Also included in this patch: - If no platform data was passed, print an error and exit instead of crashing. - Added a write_reg(_dly) macro. This improves readability when manipulating chip registers. (no more udelay() after each write). - Comments about some issues. Signed-off-by: -
Raphael Assenat authored
This patch fixes debugfs for mbxfb and adds some missing registers. The way registers were read was out of sync with the rest of the driver (direct access instead of using readl()) sdram controller registers are now accessible in the sdram/ subdirectory and some other registers are grouped in the misc/ subdirectory. Signed-off-by:
-
Raphael Assenat authored
This patch adds register bits access macros for chip's Video Plane, Scaling and interrupt registers. Signed-off-by:
-
Raphael Assenat authored
This patch corrects the address for register HSCOEFF3. Signed-off-by:
-
Freddy Spierenburg authored
Currently a lot of flickering is seen on the VGA and LCD port when one starts a DBAu1100 board, with 'CONFIG_PRINTK=3Dy'. This patch removes the flickering and as a result all kernel messages come by in a nice steady fashion. Signed-off-by:
Freddy Spierenburg <freddy@dusktilldawn.nl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
-
Helge Deller authored
- move some static data into the .rodata section - simplify source code for transl_l[] and transl_h[] which makes it more readable Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
- annotate some variables in vesafb driver as __read_mostly Signed-off-by:
-
Helge Deller authored
- annotate some variables from vgacon.c and fbmem.c as __read_mostly - move the mask[] array in fb_set_logo_truepalette() into the .rodata section Signed-off-by:
-
Helge Deller authored
- move some structs and arrays to the read-only (.rodata) section [akpm@osdl.org: build fix] Signed-off-by:
-
Helge Deller authored
- Mark the default colormaps read-only, as nobody should be allowed to modify them - Additionally mark color values as __read_mostly since they will only be modified (very seldom) by fb_invert_cmaps() - Add named C99-initializers in fb_cmap structs and use the ARRAY_SIZE() macro Signed-off-by:
-
Arnaud Patard (Rtp authored
This patch adds support for stn displays on the s3c2410 arm SoC. The LCD type is choosen by a new field in the s3c2410fb_mach_info structure and its value is the value of the PNRMODE bits. This worth to be noted as a value of 0 means that you configure a 4 bit dual scan stn display. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by:
-
Jordan Crouse authored
If no default mode is specified, it should be grabbed from the supplied database, not the default one. [teanropo@jyu.fi: fix it] [akpm@osdl.org: simplify it] [akpm@osdl.org: remove pointless DEFAULT_MODEDB_INDEX] Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Tero Roponen <teanropo@jyu.fi> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Maciej W. Rozycki authored
Inspection of real hardware has revealed one of the clock frequencies known to be supported by PMAGB-B hardware is off by 3kHz. Following is a fix. Please apply. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Acked-by:
-
David Rientjes authored
Remove unnecesary iteration and accumulator variables from SiS_DDC2Delay. Originally spotted by Jesper Juhl <jesper.juhl@gmail.com>. Cc: Jesper Juhl <jesper.juhl@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
David Rientjes <rientjes@cs.washington.edu> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jeff Garzik authored
aty128fb: return an error in the unlikely event that we cannot calculate some key PLL info rivafb: * call CalcStateExt() directly, rather than via function pointers, since CalcStateExt() is the only value ever assigned to ->CalcStateExt(). * propagate error return back from CalcVClock() through callers Signed-off-by:
Jeff Garzik <jeff@garzik.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
Amol Lad <amol@verismonetworks.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
Sergei Shtylyov authored
Straighten up the IDE control/status register caching -- you *really* can't cache the shared register per-channel and hope that it won't get out ouf sync. Set the PIO fallback mode to PIO0 for the slave drive as well as master -- there was no point in having them different (most probably a resutl of typo). Do a bit of reformat and cleanup while at it... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Sergei Shtylyov authored
Fix pdcnew_tune_drive() to always set the PIO mode requested, not pick the best possible one, change pdcnew_config_drive_xfer_rate() accordingly, and get rid of the duplicate tuneproc() call in config_chipset_for_dma(). Signed-off-by:
-
Alan Cox authored
This completes IDE except for one use which requires a new core PCI function and will be polished up at the end Signed-off-by:
-
Eric W. Biederman authored
Currently there is a regression and the ipc sysctls don't show up in the binary sysctl namespace. This patch adds sysctl_ipc_data to read data/write from the appropriate namespace and deliver it in the expected manner. [akpm@osdl.org: warning fix] Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
