- 30 Oct, 2017 40 commits
-
-
Josef Bacik authored
We only use this logic if our ref isn't a ref_head, so move it up into the if (ref) case since we know that this is a normal ref and not a delayed ref head. Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
Move this code out to a helper function to further simplivy __btrfs_run_delayed_refs. Signed-off-by:
-
Josef Bacik authored
Move the extent_op cleanup for an empty head ref to a helper function to help simplify __btrfs_run_delayed_refs. Signed-off-by:
-
Josef Bacik authored
Simplify the error handling in __btrfs_run_delayed_refs by breaking out the code used to return a head back to the delayed_refs tree for processing into a helper function. Signed-off-by:
-
Josef Bacik authored
We were only doing btrfs_check_space_for_delayed_refs() if the metadata space was full, ie we couldn't allocate chunks. This assumes we'll be able to allocate chunks during transaction commit, but since nothing does a LIMIT flush during the transaction commit this won't actually happen unless we happen to run shy of actual space. We already take into account a full fs in btrfs_check_space_for_delayed_refs() so just kill this extra check to make sure we're ending the transaction when we need to. Signed-off-by:
-
Josef Bacik authored
We were having corruption issues that were tied back to problems with the extent tree. In order to track them down I built this tool to try and find the culprit, which was pretty successful. If you compile with this tool on it will live verify every ref update that the fs makes and make sure it is consistent and valid. I've run this through with xfstests and haven't gotten any false positives. Thanks, Signed-off-by:
-
Josef Bacik authored
We need the actual root for the ref verifier tool to work, so change these functions to pass the root around instead. This will be used in a subsequent patch. Signed-off-by:
-
Josef Bacik authored
This adds the infrastructure for turning ref verify on and off for a mount, to be used by a later patch. Signed-off-by:
-
David Sterba authored
The use of sector_t in the callchain of submit_extent_page is not necessary. Switch to u64 and rename the variable and use byte units instead of 512b, ie. dropping the >> 9 shifts and avoiding the con(tro)versions of sector_t. Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
David Sterba authored
We're going to remove sector_t and will use 'offset', so this patch frees the name. Reviewed-by:
-
David Sterba authored
The use of sector_t is not necessry, it's just for a warning. Switch to u64 and rename the variable and use byte units instead of 512b, ie. dropping the >> 9 shifts. The messages are adjusted as well. Reviewed-by:
-
Josef Bacik authored
We pass in a pointer in our send arg struct, this means the struct size doesn't match with 32bit user space and 64bit kernel space. Fix this by adding a compat mode and doing the appropriate conversion. Signed-off-by:
-
Anand Jain authored
When device is missing without the -o degraded option then its an error so report it as an error instead of a warning. And when -o degraded option is provided, log the missing device as warning. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
Signed-off-by:
-
Anand Jain authored
EIO is only for the IO failure to the device, avoid it. Use ENOENT as that's the closest error code describing what happened. Signed-off-by:
-
Anand Jain authored
add_missing_dev() can return device pointer so that IS_ERR/PTR_ERR can be used to check for the actual error that occurred in the function. Signed-off-by:
-
Christos Gkekas authored
Remove variables 'start' and 'end', which are set but never used. Signed-off-by:
Christos Gkekas <chris.gekas@gmail.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Arnd Bergmann authored
We now get a harmless compile-time on 32-bit architectures: fs/btrfs/tree-checker.c: In function 'check_extent_data_item': fs/btrfs/tree-checker.c:189:70: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'unsigned int' [-Werror=format=] This changes the format string to use %zu instead of %lu for size_t. Fixes: c1f6520bf360 ("btrfs: tree-checker: Enhance output for check_extent_data_item") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Liu Bo authored
Now that we have the combo of flushing twice, which can make sure IO have started since the second flush will wait for page lock which won't be unlocked unless setting page writeback and queuing ordered extents, we don't need %async_submit_draining, %async_delalloc_pages and %nr_async_submits to tell whether the IO has actually started. Moreover, all the flushers in use are followed by functions that wait for ordered extents to complete, so %nr_async_submits, which tracks whether bio's async submit has made progress, doesn't really make sense. However, %async_delalloc_pages is still required by shrink_delalloc() as that function doesn't flush twice in the normal case (just issues a writeback with WB_REASON_FS_FREE_SPACE). Signed-off-by:
-
Liu Bo authored
By setting compression for a defrag task, the task will start IO at the end of defrag. After the combo of filemap_flush(), we've already made sure that dirty pages have made progress via async compress thread because the second filemap_flush() will wait for page lock, which won't be unlocked until those pages have been marked as writeback and ordered extents have been queued. And this is for per-inode defrag, it's not helpful to wait on a global %async_delalloc_pages and %nr_async_submits from fs_info. Although waiting on %nr_async_submits means that all bios are submitted down to per-device schedule IO lists, it doesn't wait for their completions, thus users still need to do fsync/sync to make sure the data is on disk. While with this change, it makes sure that pages are marked with writeback bits and will be submitted asynchronously shortly, therefore, the behavior of defrag option '-c' remains unchanged. Signed-off-by:
-
Liu Bo authored
This was intended to congest higher layers to not send bios, but as 1) the congested bit has been taken by writeback Async bios come from buffered writes and DIO writes. For DIO writes, we want to submit them ASAP, while for buffered writes, writeback uses balance_dirty_pages() to throttle how much dirty pages we can have. 2) and no one is waiting for %nr_async_bios down to zero, Historically, it was introduced along with changes which let checksumming workload spread accross different cpus. And at that time, pdflush was used instead of per-bdi flushing, perhaps pdflush did not have the necessary information for writeback to do throttling. We can safely remove them now. Signed-off-by:
-
Qu Wenruo authored
Output the invalid member name and its bad value, along with its expected value range or alignment. Signed-off-by:
Qu Wenruo <quwenruo.btrfs@gmx.com> Signed-off-by:
-
Qu Wenruo authored
Output the bad value and expected good value (or its alignment). Signed-off-by:
-
Qu Wenruo authored
Enhance the output to print: 1) the eason 2) the ad value, if reason is not sufficient 3) good value (range) Signed-off-by:
-
Qu Wenruo authored
Use inline function to replace macro since we don't need stringification. (Macro still exists until all callers get updated) And add more info about the error, and replace EIO with EUCLEAN. For nr_items error, report if it's too large or too small, and output the valid value range. For node block pointer, added a new alignment checker. For key order, also output the next key to make the problem more obvious. Signed-off-by:
-
Qu Wenruo authored
It's no doubt the comprehensive tree block checker will become larger, so moving them into their own files is quite reasonable. Signed-off-by:
-
Timofey Titovets authored
Remove dead assigment of num_bytes. Also as num_bytes only used in the will_compress block as copy of total_in just replace that with total_in and drop num_bytes entirely. Signed-off-by:
Timofey Titovets <nefelim4ag@gmail.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Rakesh Pandit authored
Commit a53f4f8e ("btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock.") started using internal calls and we replace them with more suitable ones. Signed-off-by:
Rakesh Pandit <rakesh@tuxera.com> Reviewed-by:
-
Hans van Kranenburg authored
Currently struct names for sysfs are generated only based on the attribute names. This means that attribute names cannot be reused in multiple places throughout the complete btrfs sysfs hierarchy. E.g. allocation/data/total_bytes and allocation/data/single/total_bytes result in the same struct name btrfs_attr_total_bytes. A workaround for this case was made in the past by ad hoc creating an extra macro wrapper, BTRFS_RAID_ATTR, that inserts some extra text in the struct name. Instead of polluting sysfs.h with such kind of extra macro definitions, and only doing so when there are collisions, use a prefix which gets inserted in the struct name, so we keep everything nicely grouped together by default. Current collections of attributes are: * (the toplevel, empty prefix) * allocation * space_info * raid * features Signed-off-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by:
-
Thomas Meyer authored
Bool initializations should use true and false. Bool tests don't need comparisons. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Reviewed-by:
-
Nikolay Borisov authored
If btrfs_transaction_commit fails it will proceed to call cleanup_transaction, which in turn already does btrfs_abort_transaction. So let's remove the unnecessary code duplication. Also let's be explicit about handling failure of btrfs_uuid_tree_add by calling btrfs_end_transaction. Signed-off-by:
-
Nikolay Borisov authored
btrfs_udpate_root can fail and it aborts the transaction, the correct way to handle an aborted transaction is to explicitly end with btrfs_end_transaction. Even now the code is correct since btrfs_commit_transaction would handle an aborted transaction but this is more of an implementation detail. So let's be explicit in handling failure in btrfs_update_root. Furthermore btrfs_commit_transaction can also fail and by ignoring it's return value we could have left the in-memory copy of the root item in an inconsistent state. So capture the error value which allows us to correctly revert the RO/RW flags in case of commit failure. Signed-off-by:
-
Anand Jain authored
btrfs_init_new_device() calls btrfs_attach_transaction() to commit sys chunks, and it should error out if it fails. Signed-off-by:
-
Anand Jain authored
Instead of BUG_ON return error to the caller. And handle the fail condition by calling the abort transaction and going through the error path. Signed-off-by:
-
Anand Jain authored
When new device is being added to seed FS, seed FS is marked writable, but when we fail to bring in the new device, we missed to undo the writable part. This patch fixes it. Signed-off-by:
-
Qu Wenruo authored
EXTENT_CSUM checker is a relatively easy one, only needs to check: 1) Objectid Fixed to BTRFS_EXTENT_CSUM_OBJECTID 2) Key offset alignment Must be aligned to sectorsize 3) Item size alignedment Must be aligned to csum size Signed-off-by:
-
Qu Wenruo authored
Add extra checks for item with EXTENT_DATA type. This checks the following thing: 0) Key offset All key offsets must be aligned to sectorsize. Inline extent must have 0 for key offset. 1) Item size Uncompressed inline file extent size must match item size. (Compressed inline file extent has no information about its on-disk size.) Regular/preallocated file extent size must be a fixed value. 2) Every member of regular file extent item Including alignment for bytenr and offset, possible value for compression/encryption/type. 3) Type/compression/encode must be one of the valid values. This should be the most comprehensive and strict check in the context of btrfs_item for EXTENT_DATA. Signed-off-by:
-
Qu Wenruo authored
Function check_leaf() checks if any item pointer points outside of the leaf, but it doesn't check if the pointer overlaps with the item itself. Normally only the last item may be the victim, but adding such check is never a bad idea anyway. Signed-off-by:
-
Qu Wenruo authored
Current check_leaf() function does a good job checking key order and item offset/size. However it only checks from slot 0 to the last but one slot, this is good but makes later expansion hard. So this refactoring iterates from slot 0 to the last slot. For key comparison, it uses a key with all 0 as initial key, so all valid keys should be larger than that. And for item size/offset checks, it compares current item end with previous item offset. For slot 0, use leaf end as a special case. This makes later item/key offset checks and item size checks easier to be implemented. Also, makes check_leaf() to return -EUCLEAN other than -EIO to indicate error. Signed-off-by:
-
Timofey Titovets authored
Was added in: c8b97818 "Btrfs: Add zlib compression support" Survive to near time (from 08.10.2008). Because 'start' checked for zero before branch, so it's safe to remove that subtraction. Signed-off-by:
Satoru Takeuchi <satoru.takeuchi@gmail.com> Reviewed-by:
-
