- 01 Dec, 2019 40 commits
-
-
Rasmus Villemoes authored
[ Upstream commit d9873969 ] Most other bitmap API, including the OOL version __bitmap_shift_right, take unsigned nbits. This was accidentally left out from 2fbad299. Link: http://lkml.kernel.org/r/20180818131623.8755-5-linux@rasmusvillemoes.dk Fixes: 2fbad299 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters") Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reported-by:
Yury Norov <ynorov@caviumnetworks.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Rasmus Villemoes authored
[ Upstream commit 7275b097 ] The static inlines in bitmap.h do not handle a compile-time constant nbits==0 correctly (they dereference the passed src or dst pointers, despite only 0 words being valid to access). I had the 0-day buildbot chew on a patch [1] that would cause build failures for such cases without complaining, suggesting that we don't have any such users currently, at least for the 70 .config/arch combinations that was built. Should any turn up, make sure they use the out-of-line versions, which do handle nbits==0 correctly. This is of course not the most efficient, but it's much less churn than teaching all the static inlines an "if (zero_const_nbits())", and since we don't have any current instances, this doesn't affect existing code at all. [1] lkml.kernel.org/r/20180815085539.27485-1-linux@rasmusvillemoes.dk Link: http://lkml.kernel.org/r/20180818131623.8755-3-linux@rasmusvillemoes.dkSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 4b408c74 ] The concern here is that "gup->size" is a u64 and "nr_pages" is unsigned long. On 32 bit systems we could trick the kernel into allocating fewer pages than expected. Link: http://lkml.kernel.org/r/20181025061546.hnhkv33diogf2uis@kili.mountain Fixes: 64c349f4 ("mm: add infrastructure for get_user_pages_fast() benchmarking") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
-
Ming Lei authored
[ Upstream commit c57cdf7a ] rq_qos_exit() removes the current q->rq_qos, this action has to be done after queue is frozen, otherwise the IO queue path may never be waken up, then IO hang is caused. So fixes this issue by moving rq_qos_exit() after queue is frozen. Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 69f8117f ] Use TEST_GEN_PROGS and don't redefine all, this makes the out-of-tree build work. We need to move the extra dependencies below the include of lib.mk, because it adds the $(OUTPUT) prefix if it's defined. We can also drop the clean rule, lib.mk does it for us. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 266bac36 ] For the out-of-tree build to work we need to tell switch_endian_test to look for check-reversed.S in $(OUTPUT). Signed-off-by:
-
Joel Stanley authored
[ Upstream commit 27825349 ] We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests makefile (lib.mk) that those tests are generated (built), and so it adds the $(OUTPUT) prefix for us, making the out-of-tree build work correctly. It also means we don't need our own clean rule, lib.mk does it. We also have to update the signal_tm rule to use $(OUTPUT). Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Joel Stanley authored
[ Upstream commit c39b7908 ] We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests makefile (lib.mk) that those tests are generated (built), and so it adds the $(OUTPUT) prefix for us, making the out-of-tree build work correctly. It also means we don't need our own clean rule, lib.mk does it. We also have to update the ptrace-pkey and core-pkey rules to use $(OUTPUT). Signed-off-by:
-
Joel Stanley authored
[ Upstream commit 9c87156c ] When building with clang (8 trunk, 7.0 release) the frame size limit is hit: arch/powerpc/xmon/xmon.c:452:12: warning: stack frame size of 2576 bytes in function 'xmon_core' [-Wframe-larger-than=] Some investigation by Naveen indicates this is due to clang saving the addresses to printf format strings on the stack. While this issue is investigated, bump up the frame size limit for xmon when building with clang. Link: https://github.com/ClangBuiltLinux/linux/issues/252Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 966c37f2 ] Similiar with ipv6 mcast commit 89225d1c ("net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12.") i) RFC3376 8.12. Older Version Querier Present Timeout says: The Older Version Querier Interval is the time-out for transitioning a host back to IGMPv3 mode once an older version query is heard. When an older version query is received, hosts set their Older Version Querier Present Timer to Older Version Querier Interval. This value MUST be ((the Robustness Variable) times (the Query Interval in the last Query received)) plus (one Query Response Interval). Currently we only use a hardcode value IGMP_V1/v2_ROUTER_PRESENT_TIMEOUT. Fix it by adding two new items mr_qi(Query Interval) and mr_qri(Query Response Interval) in struct in_device. Now we can calculate the switchback time via (mr_qrv * mr_qi) + mr_qri. We need update these values when receive IGMPv3 queries. Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 07d19dc9 ] A deduplication data corruption is exposed in XFS and btrfs. It is caused by extending the block match range to include the partial EOF block, but then allowing unknown data beyond EOF to be considered a "match" to data in the destination file because the comparison is only made to the end of the source file. This corrupts the destination file when the source extent is shared with it. The VFS remapping prep functions only support whole block dedupe, but we still need to appear to support whole file dedupe correctly. Hence if the dedupe request includes the last block of the souce file, don't include it in the actual dedupe operation. If the rest of the range dedupes successfully, then reject the entire request. A subsequent patch will enable us to shorten dedupe requests correctly. When reflinking sub-file ranges, a data corruption can occur when the source file range includes a partial EOF block. This shares the unknown data beyond EOF into the second file at a position inside EOF, exposing stale data in the second file. If the reflink request includes the last block of the souce file, only proceed with the reflink operation if it lands at or past the destination file's current EOF. If it lands within the destination file EOF, reject the entire request with -EINVAL and make the caller go the hard way. A subsequent patch will enable us to shorten reflink requests correctly. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Anton Ivanov authored
[ Upstream commit 917e2fd2 ] This fixes a long standing bug where large amounts of output could freeze the tty (most commonly seen on stdio console). While the bug has always been there it became more pronounced after moving to the new interrupt controller. The line semantics are now changed to have true IRQ write semantics which should further improve the tty/line subsystem stability and performance Signed-off-by:
Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit eaba6878 ] The current IRQ handler clears all the IRQ status bits when it bails out. This is dangerous because it might clear away the status bits that have just been set while processing the current handler. If this happens, the IRQ event for the latest transfer is lost forever. The IRQ status bits must be cleared *before* the next transfer is kicked. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 39226aaa ] Currently, a timeout error could happen at a repeated START condition. For a (non-repeated) START condition, the controller starts sending data when the UNIPHIER_FI2C_CR_STA bit is set. However, for a repeated START condition, the hardware starts running when the slave address is written to the TX FIFO - the write to the UNIPHIER_FI2C_CR register is actually unneeded. Because the hardware is already running before the IRQ is enabled for a repeated START, the driver may miss the IRQ event. In most cases, this problem does not show up since modern CPUs are much faster than the I2C transfer. However, it is still possible that a context switch happens after the controller starts, but before the IRQ register is set up. To fix this, - Do not write UNIPHIER_FI2C_CR for repeated START conditions. - Enable IRQ *before* writing the slave address to the TX FIFO. - Disable IRQ for the current CPU while queuing up the TX FIFO; If the CPU is interrupted by some task, the interrupt handler might be invoked due to the empty TX FIFO before completing the setup. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit f1fdcbbd ] This is unlikely to happen, but it is possible for a CPU to enter the interrupt handler just after wait_for_completion_timeout() has expired. If this happens, the hardware is accessed from multiple contexts concurrently. Disable the IRQ after wait_for_completion_timeout(), and do nothing from the handler when the IRQ is disabled. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
-
Jianchao Wang authored
[ Upstream commit 69840466 ] There are two cases when handle DISCARD merge. If max_discard_segments == 1, the bios/requests need to be contiguous to merge. If max_discard_segments > 1, it takes every bio as a range and different range needn't to be contiguous. But now, attempt_merge screws this up. It always consider contiguity for DISCARD for the case max_discard_segments > 1 and cannot merge contiguous DISCARD for the case max_discard_segments == 1, because rq_attempt_discard_merge always returns false in this case. This patch fixes both of the two cases above. Reviewed-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 07bddef9 ] Currently, the kernel doesn't let the administrator set a macsec device up unless its lower device is currently up. This is inconsistent, as a macsec device that is up won't automatically go down when its lower device goes down. Now that linkstate propagation works, there's really no reason for this limitation, so let's remove it. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Reported-by:
Radu Rendec <radu.rendec@gmail.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit e6ac0758 ] Like all other virtual devices (macvlan, vlan), the operstate of a macsec device should match the state of its lower device. This is done by calling netif_stacked_transfer_operstate from its netdevice notifier. We also need to call netif_stacked_transfer_operstate when a new macsec device is created, so that its operstate is set properly. This is only relevant when we try to bring the device up directly when we create it. Radu Rendec proposed a similar patch, inspired from the 802.1q driver, that included changing the administrative state of the macsec device, instead of just the operstate. This version is similar to what the macvlan driver does, and updates only the operstate. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Reported-by:
Patrick Talbert <ptalbert@redhat.com> Signed-off-by:
-
Andrea Arcangeli authored
[ Upstream commit d7c33934 ] Patch series "migrate_misplaced_transhuge_page race conditions". Aaron found a new instance of the THP MADV_DONTNEED race against pmdp_clear_flush* variants, that was apparently left unfixed. While looking into the race found by Aaron, I may have found two more issues in migrate_misplaced_transhuge_page. These race conditions would not cause kernel instability, but they'd corrupt userland data or leave data non zero after MADV_DONTNEED. I did only minor testing, and I don't expect to be able to reproduce this (especially the lack of ->invalidate_range before migrate_page_copy, requires the latest iommu hardware or infiniband to reproduce). The last patch is noop for x86 and it needs further review from maintainers of archs that implement flush_cache_range() (not in CC yet). To avoid confusion, it's not the first patch that introduces the bug fixed in the second patch, even before removing the pmdp_huge_clear_flush_notify, that _notify suffix was called after migrate_page_copy already run. This patch (of 3): This is a corollary of ced10803 ("thp: fix MADV_DONTNEED vs. numa balancing race"), 58ceeb6b ("thp: fix MADV_DONTNEED vs. MADV_FREE race") and 5b7abeae ("thp: fix MADV_DONTNEED vs clear soft dirty race). When the above three fixes where posted Dave asked https://lkml.kernel.org/r/929b3844-aec2-0111-fef7-8002f9d4e2b9@intel.com but apparently this was missed. The pmdp_clear_flush* in migrate_misplaced_transhuge_page() was introduced in a54a407f ("mm: Close races between THP migration and PMD numa clearing"). The important part of such commit is only the part where the page lock is not released until the first do_huge_pmd_numa_page() finished disarming the pagenuma/protnone. The addition of pmdp_clear_flush() wasn't beneficial to such commit and there's no commentary about such an addition either. I guess the pmdp_clear_flush() in such commit was added just in case for safety, but it ended up introducing the MADV_DONTNEED race condition found by Aaron. At that point in time nobody thought of such kind of MADV_DONTNEED race conditions yet (they were fixed later) so the code may have looked more robust by adding the pmdp_clear_flush(). This specific race condition won't destabilize the kernel, but it can confuse userland because after MADV_DONTNEED the memory won't be zeroed out. This also optimizes the code and removes a superfluous TLB flush. [akpm@linux-foundation.org: reflow comment to 80 cols, fix grammar and typo (beacuse)] Link: http://lkml.kernel.org/r/20181013002430.698-2-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Aaron Tomlin <atomlin@redhat.com> Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
-
Keith Busch authored
[ Upstream commit 319e0bec ] If the '-w' parameter was provided, the benchmark would exit due to a mssing 'break'. Link: http://lkml.kernel.org/r/20181010195605.10689-3-keith.busch@intel.comSigned-off-by:
Keith Busch <keith.busch@intel.com> Acked-by:
-
Dave Chinner authored
[ Upstream commit 64081362 ] We've recently seen a workload on XFS filesystems with a repeatable deadlock between background writeback and a multi-process application doing concurrent writes and fsyncs to a small range of a file. range_cyclic writeback Process 1 Process 2 xfs_vm_writepages write_cache_pages writeback_index = 2 cycled = 0 .... find page 2 dirty lock Page 2 ->writepage page 2 writeback page 2 clean page 2 added to bio no more pages write() locks page 1 dirties page 1 locks page 2 dirties page 1 fsync() .... xfs_vm_writepages write_cache_pages start index 0 find page 1 towrite lock Page 1 ->writepage page 1 writeback page 1 clean page 1 added to bio find page 2 towrite lock Page 2 page 2 is writeback <blocks> write() locks page 1 dirties page 1 fsync() .... xfs_vm_writepages write_cache_pages start index 0 !done && !cycled sets index to 0, restarts lookup find page 1 dirty find page 1 towrite lock Page 1 page 1 is writeback <blocks> lock Page 1 <blocks> DEADLOCK because: - process 1 needs page 2 writeback to complete to make enough progress to issue IO pending for page 1 - writeback needs page 1 writeback to complete so process 2 can progress and unlock the page it is blocked on, then it can issue the IO pending for page 2 - process 2 can't make progress until process 1 issues IO for page 1 The underlying cause of the problem here is that range_cyclic writeback is processing pages in descending index order as we hold higher index pages in a structure controlled from above write_cache_pages(). The write_cache_pages() caller needs to be able to submit these pages for IO before write_cache_pages restarts writeback at mapping index 0 to avoid wcp inverting the page lock/writeback wait order. generic_writepages() is not susceptible to this bug as it has no private context held across write_cache_pages() - filesystems using this infrastructure always submit pages in ->writepage immediately and so there is no problem with range_cyclic going back to mapping index 0. However: mpage_writepages() has a private bio context, exofs_writepages() has page_collect fuse_writepages() has fuse_fill_wb_data nfs_writepages() has nfs_pageio_descriptor xfs_vm_writepages() has xfs_writepage_ctx All of these ->writepages implementations can hold pages under writeback in their private structures until write_cache_pages() returns, and hence they are all susceptible to this deadlock. Also worth noting is that ext4 has it's own bastardised version of write_cache_pages() and so it /may/ have an equivalent deadlock. I looked at the code long enough to understand that it has a similar retry loop for range_cyclic writeback reaching the end of the file and then promptly ran away before my eyes bled too much. I'll leave it for the ext4 developers to determine if their code is actually has this deadlock and how to fix it if it has. There's a few ways I can see avoid this deadlock. There's probably more, but these are the first I've though of: 1. get rid of range_cyclic altogether 2. range_cyclic always stops at EOF, and we start again from writeback index 0 on the next call into write_cache_pages() 2a. wcp also returns EAGAIN to ->writepages implementations to indicate range cyclic has hit EOF. writepages implementations can then flush the current context and call wpc again to continue. i.e. lift the retry into the ->writepages implementation 3. range_cyclic uses trylock_page() rather than lock_page(), and it skips pages it can't lock without blocking. It will already do this for pages under writeback, so this seems like a no-brainer 3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid blocking as per pages under writeback. I don't think #1 is an option - range_cyclic prevents frequently dirtied lower file offset from starving background writeback of rarely touched higher file offsets. #2 is simple, and I don't think it will have any impact on performance as going back to the start of the file implies an immediate seek. We'll have exactly the same number of seeks if we switch writeback to another inode, and then come back to this one later and restart from index 0. #2a is pretty much "status quo without the deadlock". Moving the retry loop up into the wcp caller means we can issue IO on the pending pages before calling wcp again, and so avoid locking or waiting on pages in the wrong order. I'm not convinced we need to do this given that we get the same thing from #2 on the next writeback call from the writeback infrastructure. #3 is really just a band-aid - it doesn't fix the access/wait inversion problem, just prevents it from becoming a deadlock situation. I'd prefer we fix the inversion, not sweep it under the carpet like this. #3a is really an optimisation that just so happens to include the band-aid fix of #3. So it seems that the simplest way to fix this issue is to implement solution #2 Link: http://lkml.kernel.org/r/20181005054526.21507-1-david@fromorbit.comSigned-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Jan Kara <jack@suse.de> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 99986576 ] The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] get_zeroed_page(GFP_NOFS) fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 255: __dlm_put_mle in dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 254: spin_lock in dlm_put_ml [FUNC] get_zeroed_page(GFP_NOFS) fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 222: __dlm_put_mle in dlm_put_mle_inuse fs/ocfs2/dlm/dlmmaster.c, 219: spin_lock in dlm_put_mle_inuse To fix this bug, GFP_NOFS is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Link: http://lkml.kernel.org/r/20180901112528.27025-1-baijiaju1990@gmail.comSigned-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
-
Andrey Ryabinin authored
[ Upstream commit 19a2ca0f ] ARM64 has asm implementation of memchr(), memcmp(), str[r]chr(), str[n]cmp(), str[n]len(). KASAN don't see memory accesses in asm code, thus it can potentially miss many bugs. Ifdef out __HAVE_ARCH_* defines of these functions when KASAN is enabled, so the generic implementations from lib/string.c will be used. We can't just remove the asm functions because efistub uses them. And we can't have two non-weak functions either, so declare the asm functions as weak. Link: http://lkml.kernel.org/r/20180920135631.23833-2-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by:
Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 6c2fc9cd ] Such as: fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’: ./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value] #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) and drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’: ./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value] #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) Signed-off-by:
-
Felipe Rechia authored
[ Upstream commit e9013785 ] Fix a bug introduced by the creation of flush_all_to_thread() for processors that have SPE (Signal Processing Engine) and use it to compute floating-point operations. >From userspace perspective, the problem was seen in attempts of computing floating-point operations which should generate exceptions. For example: fork(); float x = 0.0 / 0.0; isnan(x); // forked process returns False (should be True) The operation above also should always cause the SPEFSCR FINV bit to be set. However, the SPE floating-point exceptions were turned off after a fork(). Kernel versions prior to the bug used flush_spe_to_thread(), which first saves SPEFSCR register values in tsk->thread and then calls giveup_spe(tsk). After commit 579e633e, the save_all() function was called first to giveup_spe(), and then the SPEFSCR register values were saved in tsk->thread. This would save the SPEFSCR register values after disabling SPE for that thread, causing the bug described above. Fixes 579e633e ("powerpc: create flush_all_to_thread()") Signed-off-by:
Felipe Rechia <felipe.rechia@datacom.com.br> Signed-off-by:
-
Martin Lau authored
[ Upstream commit 4a6998af ] Wenwen Wang reported: In btf_parse(), the header of the user-space btf data 'btf_data' is firstly parsed and verified through btf_parse_hdr(). In btf_parse_hdr(), the header is copied from user-space 'btf_data' to kernel-space 'btf->hdr' and then verified. If no error happens during the verification process, the whole data of 'btf_data', including the header, is then copied to 'data' in btf_parse(). It is obvious that the header is copied twice here. More importantly, no check is enforced after the second copy to make sure the headers obtained in these two copies are same. Given that 'btf_data' resides in the user space, a malicious user can race to modify the header between these two copies. By doing so, the user can inject inconsistent data, which can cause undefined behavior of the kernel and introduce potential security risk. This issue is similar to the one fixed in commit 8af03d1a ("bpf: btf: Fix a missing check bug"). To fix it, this patch copies the user 'btf_data' *before* parsing / verifying the BTF header. Fixes: 69b693f0 ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Co-developed-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit f592f804 ] The dev_map_notification() removes interface in devmap if unregistering interface's ifindex is same. But only checking ifindex is not enough because other netns can have same ifindex. so that wrong interface selection could occurred. Hence netdev pointer comparison code is added. v2: compare netdev pointer instead of using net_eq() (Daniel Borkmann) v1: Initial patch Fixes: 2ddf71e2 ("net: add notifier hooks for devmap bpf map") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Acked-by:
-
Tristram Ha authored
[ Upstream commit 899ecaed ] Socket buffer is not re-created when headroom is 2 and tailroom is 1. Signed-off-by:
Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 3a313862 ] On r8a7791/koelsch, sometimes the following message is printed during system suspend: rcar_thermal e61f0000.thermal: thermal sensor was broken This happens if the workqueue runs while the device is already suspended. Fix this by using the freezable system workqueue instead, cfr. commit 51e20d0e ("thermal: Prevent polling from happening during system suspend"). Fixes: e0a5172e ("thermal: rcar: add interrupt support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit df016bbb ] The driver on R8A77995 requests the same IRQ twice since platform_get_resource() is always called for the 1st IRQ resource. Fixes: 1969d9dc ("thermal: rcar_thermal: add r8a77995 support") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Peng Hao authored
[ Upstream commit 0387662d ] Makefile contains -D_GNU_SOURCE. remove define "_GNU_SOURCE" in c files. Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Andrea Parri authored
[ Upstream commit fb363e2d ] Fixes the following warnings: dirty_log_test.c: In function ‘help’: dirty_log_test.c:216:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=] printf(" -i: specify iteration counts (default: %"PRIu64")\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from include/test_util.h:18:0, from dirty_log_test.c:16: /usr/include/inttypes.h:105:34: note: format string is defined here # define PRIu64 __PRI64_PREFIX "u" dirty_log_test.c:218:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=] printf(" -I: specify interval in ms (default: %"PRIu64" ms)\n", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from include/test_util.h:18:0, from dirty_log_test.c:16: /usr/include/inttypes.h:105:34: note: format string is defined here # define PRIu64 __PRI64_PREFIX "u" Signed-off-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by:
-
Jerry Hoemann authored
[ Upstream commit 04d5e4bd ] Printf's say errno but print the string version of error. Make consistent. Signed-off-by:
Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit 9a244229 ] When /dev/watchdog open fails, watchdog exits with "watchdog not enabled" message. This is incorrect when open fails due to insufficient privilege. Fix message to clearly state the reason when open fails with EACCESS when a non-root user runs it. Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 2452c96e ] Test $comm in kprobe-event argument syntax testcase only if it is supported on the kernel because $comm has been introduced 4.8 kernel. So on older stable kernel, it should be skipped. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Keiji Hayashibara authored
[ Upstream commit 3511ba7d ] This commit fixes incorrect property because it was different from the actual. The parameters of '#address-cells' and '#size-cells' were removed, and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added. Fixes: 4dcd5c27 ("spi: add DT bindings for UniPhier SPI controller") Signed-off-by:
Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Garry McNulty authored
[ Upstream commit ef2298a0 ] In some error conditions, resp_buftype can be passed uninitialised to free_rsp_buf(), potentially resulting in a spurious debug message. If resp_buftype randomly had the value 1 (CIFS_SMALL_BUFFER) then this would log a debug message. The rsp pointer is initialised to NULL so there is no other side-effect. Detected by CoverityScan, CID 1438585 ("Uninitialized scalar variable") Detected by CoverityScan, CID 1438667 ("Uninitialized scalar variable") Detected by CoverityScan, CID 1438764 ("Uninitialized scalar variable") Signed-off-by:
Garry McNulty <garrmcnu@gmail.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Masahisa Kojima authored
[ Upstream commit 8e850f25 ] In ndo_stop, driver resets the netsec ethernet controller IP. When the netsec IP is reset, HW running mode turns to NRM mode and driver has to wait until this mode transition completes. But mode transition to NRM will not complete if the PHY is in normal operation state. Netsec IP requires PHY is in power down state when it is reset. This modification stops the PHY before resetting netsec. Together with this modification, phy_addr is stored in netsec_priv structure because ndev->phydev is not yet ready in ndo_init. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by:
Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by:
Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit efddff27 ] IRQ wake up support for MAX8997 driver was initially configured by respective property in pdata. However, after the driver conversion to device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD drivers initialized from device-tree assume that they can be an irq wakeup source, so enable it also for MAX8997. This fixes support for wakeup from MAX8997 RTC alarm. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 9f8ddee1 ] Power button IRQ actually has a second level of interrupts to distinguish between UI and POWER buttons. Moreover, current implementation looks awkward in approach to handle second level IRQs by first level related IRQ chip. To address above issues, split power button IRQ to be chained as well. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
