- 16 Mar, 2016 20 commits
-
-
Jani Nikula authored
Make the code easier to read and update. No functional changes. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/04b20a9be6a9481ca2eb2a42cdcdc27358152e5f.1458070700.git.jani.nikula@intel.com
-
Jani Nikula authored
Nicer for eDP (actually "EDP" instead of "D"), and makes future expansion for DSI transcoders easier. Reviewed-by:
-
Jani Nikula authored
Same as for_each_dsi_port, but for general use. Leave the for_each_dsi_port version around as an "alias" for now to not cause too much churn. No functional changes. Reviewed-by:
-
Jani Nikula authored
A small step moving us closer to DRM MIPI DSI code. Use enum mipi_dsi_pixel_format instead of our own. The first benefit is being able to use common mipi_dsi_pixel_format_to_bpp(). There's a little back and forth conversion with the VBT -> enum -> register, since we have just shoved the VBT value into the register directly. Longer term, all the VBT parsing and deciphering should be done in intel_bios.c, and abstracted there. Reviewed-by:
-
Jani Nikula authored
The enum mipi_dsi_pixel_format defines MIPI_DSI_FMT_RGB666 for the "loose" 24 bpp format and MIPI_DSI_FMT_RGB666_PACKED for the 18 bpp format. We have this the other way round, defining a loose version for 24 bpp. Follow suit with what's in enum mipi_dsi_pixel_format to avoid future confusion. Rename VID_MODE_FORMAT_RGB666 -> VID_MODE_FORMAT_RGB666_PACKED VID_MODE_FORMAT_RGB666_LOOSE -> VID_MODE_FORMAT_RGB666 Reviewed-by:
-
Chris Wilson authored
If the firmware is generic and has a run-anywhere mode, enable it rather than completely failing on unknown HW revisions. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Sunil Kamath <sunil.kamath@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Nathan Schulte authored
Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915 drm driver: "enable_dp_mst", which is enabled by default. Disabling the parameter forces newly connected DisplayPort sinks to report as not supporting multi-stream transport (MST), thus "forcing" the use of single-stream transport (SST). v2: rename parameter to conform to style v3: add signoff Signed-off-by:
Nathan Schulte <nmschulte@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com
-
Tvrtko Ursulin authored
This time using only sed and a few by hand. v2: Rename also intel_ring_id and intel_ring_initialized. v3: Fixed typo in intel_ring_initialized. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Some trivial ones, first pass done with Coccinelle: @@ @@ ( - I915_NUM_RINGS + I915_NUM_ENGINES | - intel_ring_flag + intel_engine_flag | - for_each_ring + for_each_engine | - i915_gem_request_get_ring + i915_gem_request_get_engine | - intel_ring_idle + intel_engine_idle | - i915_gem_reset_ring_status + i915_gem_reset_engine_status | - i915_gem_reset_ring_cleanup + i915_gem_reset_engine_cleanup | - init_ring_lists + init_engine_lists ) But that didn't fully work so I cleaned it up with: for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done v2: Rebase. Signed-off-by:
-
Tvrtko Ursulin authored
below and a couple manual fixups. @@ identifier I, J; @@ struct I { ... - struct intel_engine_cs *J; + struct intel_engine_cs *engine; ... } @@ identifier I, J; @@ struct I { ... - struct intel_engine_cs J; + struct intel_engine_cs engine; ... } @@ struct drm_i915_private *d; @@ ( - d->ring + d->engine ) @@ struct i915_execbuffer_params *p; @@ ( - p->ring + p->engine ) @@ struct intel_ringbuffer *r; @@ ( - r->ring + r->engine ) @@ struct drm_i915_gem_request *req; @@ ( - req->ring + req->engine ) v2: Script missed the tracepoint code - fixed up by hand. Signed-off-by: -
Tvrtko Ursulin authored
@@ identifier func; @@ func(..., struct intel_engine_cs * - ring + engine , ...) { <... - ring + engine ...> } @@ identifier func; type T; @@ T func(..., struct intel_engine_cs * - ring + engine , ...); Signed-off-by: -
Tvrtko Ursulin authored
Done by the Coccinelle script below plus a manual intervention to GEN8_RING_SEMAPHORE_INIT. @@ expression E; @@ - struct intel_engine_cs *ring = E; + struct intel_engine_cs *engine = E; <+... - ring + engine ...+> @@ @@ - struct intel_engine_cs *ring; + struct intel_engine_cs *engine; <+... - ring + engine ...+> Signed-off-by:
-
Imre Deak authored
After the commit below the Broxton PLL IDs had an off-by-one error, so fix this up. Also add a missing brace at intel_shared_dpll_init(), it happened to compile only due to the way the IS_BROXTON macro is defined. v2: - remove debugging left-over Fixes: a3c988ea ("drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code") CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457978134-12362-1-git-send-email-imre.deak@intel.com
-
Maarten Lankhorst authored
Whenever there's an update to the primary plane, fbc_pre_update and fbc_post_update are called. Kill off intel_crtc->atomic.update_fbc and now that intel_crtc->atomic is empty, kill it off too. Changes since v1: - Add a intel_fbc_supports_rotation helper. Changes since v2: - Remove intel_fbc_supports_rotation_helper. - Remove unrelated changes. Changes since v3: - Rebase Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com>
-
Maarten Lankhorst authored
fb_bits is useful to have in the crtc_state for cs flips when the code is updated to use intel_frontbuffer_flip_prepare/complete. So calculate it in advance and move it to crtc_state. The other stuff can be calculated in post_plane_update, and aren't useful elsewhere. Changes since v1: - Changing wording, remove comment about loop. Changes since v2: - Rebase. Signed-off-by:
-
Daniel Vetter authored
Backmerge because: - Maarten needs latest atomic patches from drm-misc. - Lionel needs the color manager core patch from drm-misc. - Ander extracted intel_dpll_mgr.c, we need a backmerge to avoid git losing track of things too often (right now it seems ok due to cherry-picks). - Tvrtko needs a stable baseline to apply some large-scale renaming patches to i915 GEM code. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
Arnd Bergmann authored
gcc-6 warns about code in the nouveau driver that is obviously silly: drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c: In function 'nv40_perfctr_next': drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c:62:19: warning: self-comparison always evaluats to false [-Wtautological-compare] if (pm->sequence != pm->sequence) { The behavior was accidentally introduced in a patch described as "This is purely preparation for upcoming commits, there should be no code changes here.". As far as I can tell, that was true for the rest of that patch except for this one function, which has been changed to a NOP. This patch restores the original behavior. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Fixes: 8c1aeaa1 ("drm/nouveau/pm: cosmetic changes") Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
* tag 'topic/drm-misc-2016-03-14' of git://anongit.freedesktop.org/drm-intel: (27 commits) drm: atomic helper: do not unreference error pointer drm/edid: Extract SADs properly from multiple audio data blocks drm: fix blob pointer check drm: introduce pipe color correction properties drm/atomic: Clean up update_connector_routing. drm/atomic: Clean up steal_encoder, v2. drm/atomic: Handle encoder assignment conflicts in a separate check, v3. drm/atomic: Handle encoder stealing from set_config better. drm/atomic: Always call steal_encoder, v2. drm/ast: removed optional dummy crtc mode_fixup function. drm/bochs: removed optional dummy crtc mode_fixup function. drm/fsl-dcu: removed optional dummy crtc mode_fixup function. drm/virtio: removed optional dummy crtc mode_fixup function. drm/nouveau/dispnv04: removed optional dummy crtc mode_fixup function. drm/atmel-hlcdc: remove optional dummy crtc mode_fixup function. drm/sti: removed optional dummy crtc mode_fixup function. drm/shmobile: removed optional dummy crtc mode_fixup function. drm/msm/mdp: removed optional dummy crtc mode_fixup function. drm/omapdrm: removed optional dummy crtc mode_fixup function. drm/rcar-du: removed optional dummy crtc mode_fixup function. ...
-
Dave Airlie authored
Merge tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux into drm-next * tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()
-
Tomi Valkeinen authored
The recent changes which removed platform data support from panels & encoders had a few mistakes, causing probes of DVI connector and DSI command mode panels to fail every time due to missing '!'. Fix the if()s. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 15 Mar, 2016 1 commit
-
-
Dan Carpenter authored
At the end of the function we expect "status" to be zero, but it's either -EINVAL or uninitialized. Fixes: 788bf83d ('drm/amdkfd: Add wave control operation to debugger') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com>
-
- 14 Mar, 2016 19 commits
-
-
Dave Airlie authored
This pull request covers what's left for 4.6. Notably, it includes a significant 3D performance improvement and a fix to HDMI hotplug detection for the Pi2/3. * tag 'drm-vc4-next-2016-03-14' of github.com:anholt/linux: drm/vc4: Recognize a more specific compatible string for V3D. dt-bindings: Add binding docs for V3D. drm/vc4: Return -EFAULT on copy_from_user() failure drm/vc4: Respect GPIO_ACTIVE_LOW on HDMI HPD if set in the devicetree. drm/vc4: Let gpiolib know that we're OK with sleeping for HPD. drm/vc4: improve throughput by pipelining binning and rendering jobs
-
Daniel Vetter authored
Signed-off-by: -
Eric Anholt authored
The Raspberry Pi Foundation's firmware updates are shipping device trees using the old string, so we'll keep recognizing that as this rev of V3D. Still, we should use a more specific name in the upstream DT to clarify which board is being supported, in case we do other revs of V3D in the future. Signed-off-by:
Eric Anholt <eric@anholt.net> Acked-by:
Stephen Warren <swarren@wwwdotorg.org>
-
Eric Anholt authored
This was missed in the upstreaming process. Signed-off-by:
-
git://github.com/skeggsb/linuxDave Airlie authored
- GM20x secure boot support (hence, acceleration, finally \o/) - GM200 support - GM20B clock driver - Support for power sensors on some GPUs - Various other fixes all over the place * 'linux-4.6' of git://github.com/skeggsb/linux: (95 commits) drm/nouveau/clk/gm20b: add basic driver drm/nouveau/clk/gk20a: share reusable structures/functions drm/nouveau/clk/gk20a: set lowest frequency during init() drm/nouveau/clk/gk20a: split gk20a_clk_new() drm/nouveau/clk/gk20a: abstract pl_to_div drm/nouveau/clk/gk20a: put mnp values into their own struct drm/nouveau/clk/gk20a: emit parent rate as debug message drm/nouveau/clk/gk20a: only restore divider to 1:1 if needed drm/nouveau/clk/gk20a: only compute n_lo if needed drm/nouveau/clk/gk20a: fix VCO bit mask drm/nouveau/clk/gk20a: rename enable/disable functions drm/nouveau/clk/gk20a: reorganize variables in gk20a_pllg_calc_mnp() drm/nouveau/clk/gk20a: convert parameters to Khz drm/nouveau/volt: add GM20B driver drm/nouveau/volt/gk20a: split constructor drm/nouveau/volt/gk20a: share reusable members & functions drm/nouveau/ce/gm107: expose MaxwellDmaCopyA drm/nouveau/fifo/gm107: KeplerChannelGpfifoB, and 2048 channels drm/nouveau/fifo/gk110: expose KeplerChannelGpfifoB drm/nouveau/fifo/gk104: submit NOP after all PBDMA_INTR_0, not just DEVICE ...
-
Alexandre Courbot authored
Add a basic clock driver that reuses the GK20A logic. Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
-
Alexandre Courbot authored
Make functions/structures that the GM20B driver will reuse public. Signed-off-by:
-
Alexandre Courbot authored
Err on the safe side by setting the lowest frequency (and thus voltage) during device init. Signed-off-by:
-
Alexandre Courbot authored
This allows to instanciate drivers that use the same logic as gk20a with different parameters. Add a constructor function to allow other chips that inherit from this clock to easily initialize its members Signed-off-by:
-
Alexandre Courbot authored
pl_to_div may be done differently depending on the chip. Abstract this operation so the same logic can be reused for them as well. Signed-off-by:
-
Alexandre Courbot authored
This allows us to read them using one single function and will be handy to the GM20B driver. Signed-off-by:
-
Alexandre Courbot authored
Most users are probably not interested in this information. Signed-off-by:
-
Alexandre Courbot authored
Only restore the 1:1 divider if it is not set already. Also use the proper masks for this operation and add a second write as done in the Android code. Signed-off-by:
-
Alexandre Courbot authored
n_lo is used if we are going to slide. Compute it only if that condition succeeds to avoid confusion about future usage of this computation. Signed-off-by:
-
Alexandre Courbot authored
Fix the mask specified to switch to VCO mode was given as an (incorrect) immediate value. Although the side-effect happens to be the same, this is clearly incorrect. Signed-off-by:
-
Alexandre Courbot authored
gk20a_pllg_disable() is only used in the context of gk20a_clk_fini(). Move its body there and rename _gk20a_pllg_enable() and _gk20a_pllg_disable() to non-underscored versions. Signed-off-by:
-
Alexandre Courbot authored
Move some variables declarations to the scope where they are actually used to make the code easier to follow. Signed-off-by:
-
Alexandre Courbot authored
Perform computations in Khz instead of Mhz for better precision. Signed-off-by:
-
Alexandre Courbot authored
Add basic GM20B volt driver that reuses the GK20A logic. Signed-off-by:
-
