- 04 Jul, 2018 1 commit
-
-
Linus Walleij authored
This adds the device tree bindings for the Vitesse VSC73xx switches. We also add the vendor name for Vitesse. Cc: devicetree@vger.kernel.org Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 03 Jul, 2018 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-07-03 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various improvements to bpftool and libbpf, that is, bpftool build speed improvements, missing BPF program types added for detection by section name, ability to load programs from '.text' section is made to work again, and better bash completion handling, from Jakub. 2) Improvements to nfp JIT's map read handling which allows for optimizing memcpy from map to packet, from Jiong. 3) New BPF sample is added which demonstrates XDP in combination with bpf_perf_event_output() helper to sample packets on all CPUs, from Toke. 4) Add a new BPF kselftest case for tracking connect(2) BPF hooks infrastructure in combination with TFO, from Andrey. 5) Extend the XDP/BPF xdp_rxq_info sample code with a cmdline option to read payload from packet data in order to use it for benchmarking. Also for '--action XDP_TX' option implement swapping of MAC addresses to avoid drops on some hardware seen during testing, from Jesper. ==================== Signed-off-by: -
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: various ethtool ops implementation In this patchset Anton Mikaev and I added some useful ethtool operations: - ring size changes - link renegotioation - flow control management The patch also improves init/deinit sequence. V3 changes: - After review and analysis it is clear that rtnl lock (which is captured by default on ethtool ops) is enough to secure possible overlapping of dev open/close. Thus, just dropping internal mutex. V2 changes: - using mutex to secure simultaneous dev close/open - using state var to store/restore dev state ==================== Signed-off-by: -
Igor Russkikh authored
Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Anton Mikaev authored
Adds ethtool -r|--negotiate operation support. It triggers special control bit on FW interface causing FW to restart link negotiation. Signed-off-by:
Anton Mikaev <amikaev@aquantia.com> Signed-off-by:
-
Igor Russkikh authored
Runtime change of pause frame configuration (rx/tx flow control) via ethtool. Signed-off-by:
-
Igor Russkikh authored
We now pass link drop status to FW on init/deinit. This is required to inform FW that driver took/released a control on link. FW then will manage its own state and device power profile based on this information. To improve management we remove mpi_set function which ambiguously took both state and speed parameters. Deinit callback is now a part of FW ops, as it actually manages the FW. Signed-off-by:
-
Anton Mikaev authored
Implemented ring size setup, min/max validation and reconfiguration in runtime. Signed-off-by:
-
Gustavo A. R. Silva authored
Add suffix UL to constant 1024 in order to give the compiler complete information about the proper arithmetic to use. Notice that this constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and following expressions are currently being evaluated using 32-bit arithmetic: qopt->idleslope * 1024 * ptr qopt->hicredit * 1024 * 8 qopt->locredit * 1024 * 8 Addresses-Coverity-ID: 1470246 ("Unintentional integer overflow") Addresses-Coverity-ID: 1470248 ("Unintentional integer overflow") Addresses-Coverity-ID: 1470249 ("Unintentional integer overflow") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Dan Murphy authored
If SGMII was selected in the DT then the device should write the SGMII enable bit. If SGMII is not selected in the DT then the SGMII bit should be disabled. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Dan Murphy authored
Add INT_STAT3 interrupt setting and clearing support. Signed-off-by:
-
David S. Miller authored
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by:
-
- 02 Jul, 2018 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD fixes from Shaohua Li: "Two small fixes for MD: - an error handling fix from me - a recover bug fix for raid10 from BingJing" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid10: fix that replacement cannot complete recovery after reassemble MD: cleanup resources in failure
-
git://github.com/stffrdhrn/linuxLinus Torvalds authored
Pull OpenRISC fixes from Stafford Horne: "Two fixes for issues which were breaking OpenRISC boot: - Fix bug in __pte_free_tlb() exposed in 4.18 by Matthew Wilcox's page table flag addition. - Fix issue booting on real hardware if delay slot detection emulation is disabled" * tag 'for-linus' of git://github.com/stffrdhrn/linux: openrisc: entry: Fix delay slot exception detection openrisc: Call destructor during __pte_free_tlb -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet. 2) Need to bump memory lock rlimit for test_sockmap bpf test, from Yonghong Song. 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson. 4) Fix uninitialized read in nf_log, from Jann Horn. 5) Fix raw command length parsing in mlx5, from Alex Vesker. 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini Varadhan. 7) Fix regressions in FIB rule matching during create, from Jason A. Donenfeld and Roopa Prabhu. 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren. 9) More bpfilter build fixes/adjustments from Masahiro Yamada. 10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper Dangaard Brouer. 11) fib_tests.sh file permissions were broken, from Shuah Khan. 12) Make sure BH/preemption is disabled in data path of mac80211, from Denis Kenzior. 13) Don't ignore nla_parse_nested() return values in nl80211, from Johannes berg. 14) Properly account sock objects ot kmemcg, from Shakeel Butt. 15) Adjustments to setting bpf program permissions to read-only, from Daniel Borkmann. 16) TCP Fast Open key endianness was broken, it always took on the host endiannness. Whoops. Explicitly make it little endian. From Yuching Cheng. 17) Fix prefix route setting for link local addresses in ipv6, from David Ahern. 18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva. 19) Various bpf sockmap fixes, from John Fastabend. 20) Use after free for GRO with ESP, from Sabrina Dubroca. 21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from Eric Biggers. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) qede: Adverstise software timestamp caps when PHC is not available. qed: Fix use of incorrect size in memcpy call. qed: Fix setting of incorrect eswitch mode. qed: Limit msix vectors in kdump kernel to the minimum required count. ipvlan: call dev_change_flags when ipvlan mode is reset ipv6: sr: fix passing wrong flags to crypto_alloc_shash() net: fix use-after-free in GRO with ESP tcp: prevent bogus FRTO undos with non-SACK flows bpf: sockhash, add release routine bpf: sockhash fix omitted bucket lock in sock_close bpf: sockmap, fix smap_list_map_remove when psock is in many maps bpf: sockmap, fix crash when ipv6 sock is added net: fib_rules: bring back rule_exists to match rule during add hv_netvsc: split sub-channel setup into async and sync net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN atm: zatm: Fix potential Spectre v1 s390/qeth: consistently re-enable device features s390/qeth: don't clobber buffer on async TX completion s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] s390/qeth: fix race when setting MAC address ... -
David S. Miller authored
Peng Li says: ==================== net: hns3: a few code improvements This patchset removes some redundant code and fixes a few code stylistic issues from internal concentrated review, no functional changes introduced. --- Change log: V1 -> V2: 1, remove a patch according to the comment reported by David Miller. --- ==================== Signed-off-by: -
Peng Li authored
For consistency, prefix hnae_ should be modified to hnae3_. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
Reference to Documentation/DMA-API-HOWTO.txt, Streaming DMA mappings which are usually mapped for one DMA transfer, Network card DMA ring descriptors should use Consistent DMA mappings. Signed-off-by:
-
Huazhong Tan authored
Give default option for HNS3_HCLGE and HNS3_ENET will be helpful, while dependency HNS3 is set. Meanwhile, use "if HNS3" section instead of all the "depends on HNS3". Signed-off-by:
-
Huazhong Tan authored
Some members in struct hns3_enet_tqp_vector, struct hnae3_client and struct hnae3_ae_algo are unused. This patch removes them. Signed-off-by:
-
Huazhong Tan authored
Set complete in the first hclge_cmd_csq_done of hclge_cmd_send, and check if complete later, unnecessary to do hclge_cmd_csq_done again. Signed-off-by:
-
Huazhong Tan authored
csq is used as a ring buffer, the value of the desc will be replaced in next use. This patch removes the unnecessary memset, and just updates the next_to_clean. Signed-off-by:
-
Huazhong Tan authored
Remove some redundant assignments. desc->flag = cpu_to_le16(HCLGE_CMD_FLAG_NO_INTR | HCLGE_CMD_FLAG_IN) has set bit HCLGE_CMD_FLAG_WR to zero, so does others. Signed-off-by:
-
Huazhong Tan authored
There are some useless type cast, print in hclge_cmd_send. This patch removes them. Signed-off-by:
-
Huazhong Tan authored
hclge_ring_to_dma_dir is unused anywhere. This patch removes it. Signed-off-by:
-
Colin Ian King authored
Pointer zatm_dev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'zatm_dev' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Heiner Kallweit authored
RTL8211C has an issue when operating in Gigabit slave mode, therefore genphy driver can't be used. See also this U-boot change. https://lists.denx.de/pipermail/u-boot/2016-March/249712.html Add a PHY driver for this chip with the quirk to force Gigabit master mode. As a note: This will make it impossible to connect two network ports directly which both are driven by a RTl8211C. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Roman Mashak authored
Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Guenter Roeck authored
gcc 8.1.0 complains: drivers/isdn/i4l/isdn_tty.c: In function 'isdn_tty_suspend.isra.1': drivers/isdn/i4l/isdn_tty.c:790:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length drivers/isdn/i4l/isdn_tty.c:778:6: note: length computed here drivers/isdn/i4l/isdn_tty.c: In function 'isdn_tty_resume': drivers/isdn/i4l/isdn_tty.c:880:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length drivers/isdn/i4l/isdn_tty.c:817:6: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Heiner Kallweit authored
When adding support for RTL8211 I forgot to update the mdio_device_id table. Signed-off-by:
-
Yafang Shao authored
Currently trace_sock_exceed_buf_limit() only show rmem info, but wmem limit may also be hit. So expose wmem info in this tracepoint as well. Regarding memcg, I think it is better to introduce a new tracepoint(if that is needed), i.e. trace_memcg_limit_hit other than show memcg info in trace_sock_exceed_buf_limit. Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
This hack (affecting the non-PCIe models only) was introduced in 2004 to deal with link negotiation failures in 1GBit mode. Based on a comment in the r8169 vendor driver I assume the issue affects RTL8169sb in combination with particular 1GBit switch models. Resetting the PHY every 10s and hoping that one fine day we will make it to establish the link seems to be very hacky to me. I'd say: If 1GBit doesn't work reliably in a users environment then the user should remove 1GBit from the advertised modes, e.g. by using ethtool -s <if> advertise <10/100 modes> If the issue affects one chip version only and that with most link partners, then we could also think of removing 1GBit from the advertised modes for this chip version in the driver. Signed-off-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed*: Fix series. The patch series addresses few issues in the qed* drivers. Please consider applying it to 'net' branch. ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode), get-tsinfo() callback should return the software timestamp capabilities instead of returning the error. Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Use the correct size value while copying chassis/port id values. Fixes: 6ad8c632 ("qed: Add support for query/config dcbx.") Signed-off-by:
-
Sudarsana Reddy Kalluru authored
By default, driver sets the eswitch mode incorrectly as VEB (virtual Ethernet bridging). Need to set VEB eswitch mode only when sriov is enabled, and it should be to set NONE by default. The patch incorporates this change. Fixes: 0fefbfba ("qed*: Management firmware - notifications and defaults") Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Memory size is limited in the kdump kernel environment. Allocation of more msix-vectors (or queues) consumes few tens of MBs of memory, which might lead to the kdump kernel failure. This patch adds changes to limit the number of MSI-X vectors in kdump kernel to minimum required value (i.e., 2 per engine). Fixes: fe56b9e6 ("qed: Add module with basic common support") Signed-off-by:
-
Hangbin Liu authored
After we change the ipvlan mode from l3 to l2, or vice versa, we only reset IFF_NOARP flag, but don't flush the ARP table cache, which will cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2(). Then the message will not come out of host. Here is the reproducer on local host: ip link set eth1 up ip addr add 192.168.1.1/24 dev eth1 ip link add link eth1 ipvlan1 type ipvlan mode l3 ip netns add net1 ip link set ipvlan1 netns net1 ip netns exec net1 ip link set ipvlan1 up ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1 ip route add 192.168.2.0/24 via 192.168.1.2 ping 192.168.2.2 -c 2 ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2 ping 192.168.2.2 -c 2 Add the same configuration on remote host. After we set the mode to l2, we could find that the src/dst MAC addresses are the same on eth1: 21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64 Fix this by calling dev_change_flags(), which will call netdevice notifier with flag change info. v2: a) As pointed out by Wang Cong, check return value for dev_change_flags() when change dev flags. b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops. So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path. Reported-by:Jianlin Shi <jishi@redhat.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Eric Biggers authored
The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags, not 'gfp_t'. So don't pass GFP_KERNEL to it. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Colin Ian King authored
Currently if sa_idx is equal to NSIM_IPSEC_MAX_SA_COUNT then an out-of-bounds read on ipsec->sa will occur. Fix the incorrect bounds check by using >= rather than >. Detected by CoverityScan, CID#1470226 ("Out-of-bounds-read") Fixes: 7699353d ("netdevsim: add ipsec offload testing") Signed-off-by:Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
