- 04 Feb, 2011 12 commits
-
-
Vasiliy Kulikov authored
Don't allow everybody to set terminator via sysfs. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasiliy Kulikov authored
Don't allow everybody to write to mb0_id file. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
The fdb_create() puts a new fdb into hash with only addr set. This is not good, since there are callers, that search the hash w/o the lock and access all the other its fields. Applies to current netdev tree. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Francois Romieu authored
While the RxFIFO interruption is masked for most 8168, nothing prevents it to appear in the irq status word. This is no excuse to crash. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Hayes <hayeswang@realtek.com>
-
Francois Romieu authored
Some experiment-based action to prevent my 8168 chipsets locking-up hard in the irq handler under load (pktgen ~1Mpps). Apparently a reset is not always mandatory (is it at all ?). - RTL_GIGA_MAC_VER_12 - RTL_GIGA_MAC_VER_25 Missed ~55% packets. Note: - this is an old SiS 965L motherboard - the 8168 chipset emits (lots of) control frames towards the sender - RTL_GIGA_MAC_VER_26 The chipset does not go into a frenzy of mac control pause when it crashes yet but it can still be crashed. It needs more work. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Hayes <hayeswang@realtek.com>
-
Ivan Vecera authored
I found that one of the 8168c chipsets (concretely XID 1c4000c0) starts generating RxFIFO overflow errors. The result is an infinite loop in interrupt handler as the RxFIFOOver is handled only for ...MAC_VER_11. With the workaround everything goes fine. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com>
-
Julia Lawall authored
nlmsg_cancel can accept NULL as its second argument, so for similarity, this patch extends genlmsg_cancel to be able to accept a NULL second argument as well. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Commit 709b46e8 ("net: Add compat ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT") added the correct plumbing to handle SIOCGETSGCNT properly. However, whilst definiting a proper "struct compat_sioc_sg_req" it isn't actually used in ipmr_compat_ioctl(). Correct this oversight. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
As reported by Flavio Leitner, there is no synchronization to protect NIU's get_stats method from seeing a NULL pointer in either np->rx_rings or np->tx_rings. In fact, as far as ->ndo_get_stats is concerned, these values are set completely asynchronously. Flavio attempted to fix this using a RW semaphore, which in fact works most of the time. However, dev_get_stats() can be invoked from non-sleepable contexts in some cases, so this fix doesn't work in all cases. So instead, control the visibility of the np->{rx,tx}_ring pointers when the device is being brough up, and use properties of the device down sequence to our advantage. In niu_get_stats(), return immediately if netif_running() is false. The device shutdown sequence first marks the device as not running (by clearing the __LINK_STATE_START bit), then it performans a synchronize_rcu() (in dev_deactive_many()), and then finally it invokes the driver ->ndo_stop() method. This guarentees that all invocations of niu_get_stats() either see netif_running() as false, or they see the channel pointers before ->ndo_stop() clears them out. If netif_running() is true, protect against startup races by loading the np->{rx,tx}_rings pointer into a local variable, and punting if it is NULL. Use ACCESS_ONCE to prevent the compiler from reloading the pointer on us. Also, during open, control the order in which the pointers and the ring counts become visible globally using SMP write memory barriers. We make sure the np->num_{rx,tx}_rings value is stable and visible before np->{rx,tx}_rings is. Such visibility control is not necessary on the niu_free_channels() side because of the RCU sequencing that happens during device down as described above. We are always guarenteed that all niu_get_stats calls are finished, or will see netif_running() false, by the time ->ndo_stop is invoked. Reported-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Feb, 2011 10 commits
-
-
-
Peter Chubb authored
There was some confusion at LCA as to why the sysctl tcp_ecn took one of three values when it was documented as a Boolean. This patch fixes the documentation. Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chuck Ebbert authored
Commit 8f574b35 ("atl1c: Add AR8151 v2 support and change L0s/L1 routine") added support for a new adapter but failed to add it to the PCI device table. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Weil authored
This error was reported by cppcheck: drivers/s390/net/smsgiucv.c:63: error: Using sizeof for array given as function argument returns the size of pointer. Although there is no runtime problem as long as sizeof(u8 *) == 8, this misleading code should get fixed. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Weil authored
This error was reported by cppcheck: drivers/s390/net/netiucv.c:568: error: Using sizeof for array given as function argument returns the size of pointer. sizeof(ipuser) did not result in 16 (as many programmers would have expected) but sizeof(u8 *), so it is 4 or 8, too small here. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
For OSA the CHPARM-definition determines the number of available outbound queues. A CHPARM-change may occur while a Linux system with probed OSA device is in suspend state. This patch enables proper resuming of an OSA device in this case. Signed-off-by: Ursula braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
For HiperSockets the framesize-definition determines the selected mtu-size and the size of the allocated qdio buffers. A framesize-change may occur while a Linux system with probed HiperSockets device is in suspend state. This patch enables proper resuming of a HiperSockets device in this case. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frank Blaschka authored
HiperSockets and OSA hardware report a maximum MTU size. Add checking to reject larger MTUs than allowed by hardware. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
Setting of a MAC-address may fail because an already used MAC-address is to bet set or because of authorization problems. In those cases qeth issues a message, but the mentioned MAC-address is not the new MAC-address to be set, but the actual MAC-address. This patch chooses now the new MAC-address to be set for the error messages. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Gospodarek authored
Like Herbert's change from a few days ago: 66c46d74 gro: Reset dev pointer on reuse this may not be necessary at this point, but we should still clean up the skb->skb_iif. If not we may end up with an invalid valid for skb->skb_iif when the skb is reused and the check is done in __netif_receive_skb. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Feb, 2011 16 commits
-
-
Ajit Khaparde authored
It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Weil authored
This warning was reported by cppcheck: drivers/isdn/icn/icn.c:1641: error: Dangerous usage of 'rev' (strncpy doesn't always 0-terminate it) If strncpy copied 20 bytes, the destination string rev was not terminated. The patch adds one more byte to rev and makes sure that this byte is always 0. Cc: Karsten Keil <isdn@linux-pingi.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladislav Zolotarov authored
The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Cox authored
Replace the rather weird use of ++ with + 1 as the value is being assigned Signed-off-by: Alan Cox <alan@linux.intel.com>
-
-
Stefan Weil authored
This error is reported by cppcheck: drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Sivakumar Subramani <sivakumar.subramani@exar.com> Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Cc: Jon Mason <jon.mason@exar.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mohammed Shafi Shajakhan authored
free the skb's when the Tx of PAPRD frames fails and also add a debug message indicating that. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pablo Neira Ayuso authored
For the following rule: iptables -I PREROUTING -t raw -j CT --ctevents assured The event delivered looks like the following: [UPDATE] tcp 6 src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED] Note that the TCP protocol state is not included. For that reason the CT event filtering is not very useful for conntrackd. To resolve this issue, instead of conditionally setting the CT events bits based on the ctmask, we always set them and perform the filtering in the late stage, just before the delivery. Thus, the event delivered looks like the following: [UPDATE] tcp 6 432000 ESTABLISHED src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED] Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Pablo Neira Ayuso authored
In 135367b8 "netfilter: xtables: change xt_target.checkentry return type", the type returned by checkentry was changed from boolean to int, but the return values where not adjusted. arptables: Input/output error This broke arptables with the mangle target since it returns true under success, which is interpreted by xtables as >0, thus returning EIO. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Michael S. Tsirkin authored
When built with rcu checks enabled, vhost triggers bogus warnings as vhost features are read without dev->mutex sometimes, and private pointer is read with our kind of rcu where work serves as a read side critical section. Fixing it properly is not trivial. Disable the warnings by stubbing out the checks for now. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Stefan Weil authored
This error was reported by cppcheck: drivers/net/enc28j60.c:815: error: Using sizeof for array given as function argument returns the size of pointer. The original code reads 4 or 8 bytes instead of TSV_SIZE (= 100) bytes. I just fixed the code, but did not run any tests. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
In my testing of 2.6.37 I was occassionally getting a warning about sysctl table entries being unregistered in the wrong order. Digging in it turns out this dates back to the last great sysctl reorg done where Al Viro introduced the requirement that sysctl directories needed to be created before and destroyed after the files in them. It turns out that in that great reorg /proc/sys/net/ipv6/neigh was overlooked. So this patch fixes that oversight and makes an annoying warning message go away. >------------[ cut here ]------------ >WARNING: at kernel/sysctl.c:1992 unregister_sysctl_table+0x134/0x164() >Pid: 23951, comm: kworker/u:3 Not tainted 2.6.37-350888.2010AroraKernelBeta.fc14.x86_64 #1 >Call Trace: > [<ffffffff8103e034>] warn_slowpath_common+0x80/0x98 > [<ffffffff8103e061>] warn_slowpath_null+0x15/0x17 > [<ffffffff810452f8>] unregister_sysctl_table+0x134/0x164 > [<ffffffff810e7834>] ? kfree+0xc4/0xd1 > [<ffffffff813439b2>] neigh_sysctl_unregister+0x22/0x3a > [<ffffffffa02cd14e>] addrconf_ifdown+0x33f/0x37b [ipv6] > [<ffffffff81331ec2>] ? skb_dequeue+0x5f/0x6b > [<ffffffffa02ce4a5>] addrconf_notify+0x69b/0x75c [ipv6] > [<ffffffffa02eb953>] ? ip6mr_device_event+0x98/0xa9 [ipv6] > [<ffffffff813d2413>] notifier_call_chain+0x32/0x5e > [<ffffffff8105bdea>] raw_notifier_call_chain+0xf/0x11 > [<ffffffff8133cdac>] call_netdevice_notifiers+0x45/0x4a > [<ffffffff8133d2b0>] rollback_registered_many+0x118/0x201 > [<ffffffff8133d3af>] unregister_netdevice_many+0x16/0x6d > [<ffffffff8133d571>] default_device_exit_batch+0xa4/0xb8 > [<ffffffff81337c42>] ? cleanup_net+0x0/0x194 > [<ffffffff81337a2a>] ops_exit_list+0x4e/0x56 > [<ffffffff81337d36>] cleanup_net+0xf4/0x194 > [<ffffffff81053318>] process_one_work+0x187/0x280 > [<ffffffff8105441b>] worker_thread+0xff/0x19f > [<ffffffff8105431c>] ? worker_thread+0x0/0x19f > [<ffffffff8105776d>] kthread+0x7d/0x85 > [<ffffffff81003824>] kernel_thread_helper+0x4/0x10 > [<ffffffff810576f0>] ? kthread+0x0/0x85 > [<ffffffff81003820>] ? kernel_thread_helper+0x0/0x10 >---[ end trace 8a7e9310b35e9486 ]--- Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ken Kawasaki authored
axnet_cs: mdelay of 10ms is too long at ei_rx_overrun. It should be reduced to 2ms. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
In get_rps_cpu, add check that the rps_flow_table for the device is NULL when trying to take fast path when RPS map length is one. Without this, RFS is effectively disabled if map length is one which is not correct. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Jan, 2011 2 commits
-
-
Chuck Ebbert authored
Without this dependency the softing driver will be buildable on s390, where it fails. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Dreier authored
When an IPSEC SA is still being set up, __xfrm_lookup() will return -EREMOTE and so ip_route_output_flow() will return a blackhole route. This can happen in a sndmsg call, and after d33e4553 ("net: Abstract default MTU metric calculation behind an accessor.") this leads to a crash in ip_append_data() because the blackhole dst_ops have no default_mtu() method and so dst_mtu() calls a NULL pointer. Fix this by adding default_mtu() methods (that simply return 0, matching the old behavior) to the blackhole dst_ops. The IPv4 part of this patch fixes a crash that I saw when using an IPSEC VPN; the IPv6 part is untested because I don't have an IPv6 VPN, but it looks to be needed as well. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-