- 29 Oct, 2010 9 commits
-
-
Paul Mundt authored
Platform data takes care of all of these these days, kill them off. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Trivial shuffling and tidying. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The only reason this board needs to do PIO trapping is for ethernet, which happens to follow the same scheme as its bigger brother the edosk7760. With ethernet properly supported through the platform device, we can kill off the left over PIO abortion. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The PIO trapping was only for MRSHPC and the SMC ethernet. Given that the SMC ethernet is already properly handled and that nothing is using the MRSHPC, none of this is needed. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This code has been untouched since it was merged many years ago, and has severely bitrotted since, suggesting that the board has no real users left. Notice of intent to remove has been sent out over the last few years, with no takers. Kill it off. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
Only the secureedge5410 was ever supported by this code, so make the board specification explicit rather than perpetuating a mach group. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
None of these PIO routines do anything other than basic error checking, get rid of them and use the generic fallbacks. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
The microdev only has to contend with silly PIO mangling on anything within the SuperIO range. As each of the SuperIO modules is already speciail cased, we just shift that logic over to the ioport map. With microdev PCI never being merged (and being fudamentally broken in hardware), and the ethernet chip only doing 16-bit accesses already, there's no need to maintain any of the extra special casing. Kill it all off. Signed-off-by:
Paul Mundt <lethal@linux-sh.org>
-
Linus Torvalds authored
Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
-
- 28 Oct, 2010 31 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: scripts/package: don't break if %{_smp_mflags} isn't set kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (39 commits) Revert "namespace: add source file location exceptions" Coccinelle: Add contextual message Coccinelle: Fix documentation Coccinelle: Find doubled arguments to boolean or bit operators. Coccinelle: Find nested lock+irqsave functions that use the same flags variables. namespace: add source file location exceptions scripts/extract-ikconfig: add support for bzip2, lzma and lzo kbuild: check return value of asprintf() scripts/namespace.pl: improve to get more correct results scripts/namespace.pl: some bug fixes scripts/namespace.pl: update file exclusion list scripts/namespace.pl: fix wrong source path Coccinelle: Use the -no_show_diff option for org and report mode Coccinelle: Add a new mode named 'chain' Coccinelle: Use new comment format to explain kfree.cocci Coccinelle: Improve user information with a new kind of comment Coccinelle: Update documentation MAINTAINERS: Coccinelle: Update email address Documentation/kbuild: modules.txt cleanup Documentation/kbuild: major edit of modules.txt sections 5-8 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits) kbuild: convert `arch/tile' to the kconfig mainmenu upgrade README: cite nconfig Revert "kconfig: Temporarily disable dependency warnings" kconfig: Use PATH_MAX instead of 128 for path buffer sizes. kconfig: Fix realloc usage() kconfig: Propagate const kconfig: Don't go out from read config loop when you read new symbol kconfig: fix menuconfig on debian lenny kbuild: migrate all arch to the kconfig mainmenu upgrade kconfig: expand file names kconfig: use the file's name of sourced file kconfig: constify file name kconfig: don't emit warning upon rootmenu's prompt redefinition kconfig: replace KERNELVERSION usage by the mainmenu's prompt kconfig: delay gconf window initialization kconfig: expand by default the rootmenu's prompt kconfig: add a symbol string expansion helper kconfig: regen parser kconfig: implement the `mainmenu' directive kconfig: allow PACKAGE to be defined on the compiler's command-line ... Fix up trivial conflict in arch/mn10300/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (73 commits) power: Revert "power_supply: Mark twl4030_charger as broken" mfd: Fix a memory leak when unload mc13xxx-core module mfd: Fix resource reclaim for max8998 mfd: Remove unneeded ret value checking for max8998 register updates mfd: Add free max8998->ono irq in max8998_irq_exit() mfd: Fix resource reclaim in pcf50633_remove() omap4: pandaboard: fix up mmc card detect logic mfd: Fix ezx_pcap_probe error path mfd: Fix off-by-one value range checking for tps6507x mfd: Remove __devinitdata from tc6393xb_mmc_resources mfd: Add WM831x SPI support mfd: Factor out WM831x I2C I/O from the core driver mfd: Remove DEBUG defines from mc13xxx-core mfd: Fix jz4740_adc_set_enabled mfd: Add TPS658621C device ID mfd: Fix twl-irq function declaration warnings regulator: max8998 BUCK1/2 voltage change with use of GPIOs mfd: Voltages and GPIOs platform_data definitions for max8998 regulator: max8998 BUCK1/2 internal voltages and indexes defined mfd: Support for ICs compliant with max8998 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code watchdog: add support for Broadcom BCM63xx built-in watchdog watchdog: f71808e_wdt: add support for the F71889FG watchdog: MachZ: fix debug macro watchdog: it8712f_wdt: Add module parameter for alternative reset sources watchdog: it8712f_wdt: Add comments for config/control register names watchdog: it87_wdt: Add support for watchdogs with 8b timers watchdog: it87_wdt: Add support for IT8720F watchdog watchdog: Use static const char * const where possible watchdog: iTCO_wdt: Cleanup warning messages watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: BUG_ON fix: check if page has buffers before calling page_buffers()
-
Prarit Bhargava authored
The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove to fail because of an incorrect usage count. The probe for this driver does a for_each_pci_dev() which gets a reference for a pci_dev when iTCO_wdt_init() is successful. The for_each_pci_dev() loop puts a reference for a pci_dev when iTCO_wdt_init() fails, so the iTCO_wdt_init() does not need to do any pci_dev_put()'s. The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
Samuel Ortiz authored
The missing definitions are now in. This reverts commit 23886839. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Axel Lin authored
Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Axel Lin authored
Properly free irq and unregister max8998->rtc device in max8998_i2c_probe() error path and max8998_i2c_remove(). Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Axel Lin authored
i2c_smbus_write_byte_data() returns zero or negative value, therefore no need to check if ret is greater than zero or not. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Axel Lin authored
Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Axel Lin authored
Calling sysfs_remove_group() to remove sysfs entries and unregister bl_pdev in pcf50633_remove(). Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Harald Welte <laforge@gnumonks.org> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Menon, Nishanth authored
For MMC1 Controller, card detect interrupt source is twl6030 which is non-gpio. The card detect call back function provides card present/absent status by reading MMC Control register present on twl6030. This functionality was introduced in mfd tree on track to kernel.org Sync pandaboard to the same and make mmc work. Cc: Tony Lindgren <tony@atomide.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by:
Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Tested-by:
Jarkko Nikula <jhnikula@gmail.com> Acked-by:
Madhusudhan Chikkature <madhu.cr@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Axel Lin authored
return -ENOMEM if create_singlethread_workqueue failed. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Axel Lin authored
If bytes == (TPS6507X_MAX_REGISTER + 1), we have a buffer overflow when doing memcpy(&msg[1], src, bytes). Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Marek Vasut authored
This static struct resource tc6393xb_mmc_resources[] is used in resume function, therefore the data can not be wiped after init. Also, this causes a section mismatch. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Acked-by:
Ian Molton <ian@mnementh.co.uk> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Mark Brown authored
Implement support for controlling WM831x and WM832x devices using SPI. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Mark Brown authored
In preparation for the addition of SPI support for the WM831x move the I2C specific code into a separate file with a separate Kconfig option so the I2C support can be excluded from the build. Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new symbol. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Samuel Ortiz authored
DEBUG and VERBOSE_DEBUG are not used. Reported-by:
David Jander <david@protonic.nl> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Axel Lin authored
When enabled is false, clear BIT(engine) of JZ_REG_ADC_ENABLE register. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Andrew Chew authored
The interface for this device should be identical to that of the TPS658521A. Signed-off-by:
Andrew Chew <achew@nvidia.com> Acked-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
G, Manjunath Kondaiah authored
Fixes following sparse warnings for twl4030 and twl6030 irq files. drivers/mfd/twl4030-irq.c:783:5: warning: symbol 'twl4030_init_irq' was not declared. Should it be static? drivers/mfd/twl4030-irq.c:863:5: warning: symbol 'twl4030_exit_irq' was not declared. Should it be static? drivers/mfd/twl4030-irq.c:873:5: warning: symbol 'twl4030_init_chip_irq' was not declared. Should it be static? drivers/mfd/twl6030-irq.c:226:5: warning: symbol 'twl6030_init_irq' was not declared. Should it be static? drivers/mfd/twl6030-irq.c:290:5: warning: symbol 'twl6030_exit_irq' was not declared. Should it be static? Signed-off-by:
G, Manjunath Kondaiah <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Lukasz Majewski authored
max8998_pmic_probe: - modified to check if valid pins are defined at platform data - maximal voltage values (predefined at platform data) are uploaded to max8998 device max8998_set_voltage_buck: - BUCK1/2 voltages change between values already defined - Checks if valid GPIO pins are passed from platform data - If requested voltage cannot be satisfied from already defined values, then one of free slots is used - Predefined maximum voltages (as defined at platform data) are always available Signed-off-by:
Lukasz Majewski <l.majewski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Lukasz Majewski authored
Signed-off-by:
Lukasz Majewski <l.majewski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Lukasz Majewski authored
BUCK1/2 internal voltages and indexes defined in the struct max8998_data max_get_voltage_register now uses index values to chose proper register More generic BUCK1/2 registers names provided Signed-off-by:
Lukasz Majewski <l.majewski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Lukasz Majewski authored
Signed-off-by:
Lukasz Majewski <l.majewski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Lukasz Majewski authored
Signed-off-by:
Lukasz Majewski <l.majewski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Grazvydas Ignotas authored
The chip TRM documentation contradicts itself about this bit, page 174 of swcu050e says bit should be 0 for clear-on-read behavior, while page 487 says it should be 1. Testing shows it should be 1, so set the .set_cor flag accordingly. This is needed for upcoming BCI charging driver to function. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Brian Harring authored
When the cell data_size is 0, the resulting platform_data pointer will be set to ZERO_SIZE_PTR. That could be misleading for device drivers running a NULL check on thei platform_data pointer before dereferencing it. Signed-off-by:
Brian Harring <ferringb@gmail.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Grazvydas Ignotas authored
Now that we have twl4030 charger driver, add back it's platform_data (which was removed by f7ea2dc5 as unused). Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-