- 29 May, 2020 14 commits
-
-
Libin Yang authored
As CONFIG_SND_HDA_CODEC_HDMI is always enabled in sof_pcm512x, let's remove the test of CONFIG_SND_HDA_CODEC_HDMI in the sof_pcm512x driver. Signed-off-by:
Libin Yang <libin.yang@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200529193547.6077-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Libin Yang authored
As CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC is always enabled in sof-soundwire driver, let's remove the test of CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC in the code. Signed-off-by:
-
Libin Yang authored
If the driver uses common hdmi, SND_SOC_SOF_HDA_AUDIO_CODEC is required to be enabled. Otherwise, the legacy hda codec driver will not be used. Signed-off-by:
-
Kai Vehmanen authored
Add support for using generic codec driver with SOF. Generic driver is used if: - snd_sof_intel_hda_common.hda_model="generic" is set, or - fallback if no other codec driver is found The implementation is aligned with snd-hda-intel driver, and fixes audio support for systems like Acer Swift 3 SF314-57G, on which this issue was originally reported. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
With the allmodconfig option, CONFIG_SND_SOC_SOF_BAYTRAIL is disabled due to mutual exclusion with the legacy driver. This generates 'defined by not used' warnings. suspend/resume/remove are only supported for Baytrail for now, so move the code under the CONFIG_SND_SOC_SOF_BAYTRAIL checks. Fixes: ddcccd54 ("ASoC: SOF: Intel: byt: Add PM callbacks") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
朱灿灿 authored
FE state is SND_SOC_DPCM_STATE_PREPARE now, BE1 is used by FE. Later when new BE2 is added to FE by mixer update, it will call dpcm_run_update_startup() to update BE2's state, but unfortunately BE2 .prepare() meets error, it will disconnect all non started BE. This make BE1 dai skip .hw_free() and .shutdown(), and the BE1 users will never decrease to zero. Signed-off-by:
zhucancan <zhucancan@vivo.com> Link: https://lore.kernel.org/r/ALMAWwB5CP9aAcKXCU5FzqqF.1.1590747164172.Hmail.zhucancan@vivo.comSigned-off-by:
-
Pierre-Louis Bossart authored
Recent changes result in multiple dmesg traces such as: [ 14.410435] Audio Port: ASoC: error at snd_soc_link_startup on Audio Port: 1 [ 14.410446] sst-mfld-platform sst-mfld-platform: ASoC: error at snd_soc_dai_startup on media-cpu-dai: 1 These messages are not really errors, when dai and dai-link callbacks return the value of e.g. snd_pcm_hw_constraint_single() the result is "Positive if the value is changed, zero if it's not changed, or a negative error code" Add a simple test to skip the checks for positive returned values Suggested-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Mark Brown authored
This small series is to optimize the header logging during the topology parsing. This is verified work fine on both SOF and SST drivers. Change History: v3: - Remove using the separated soc_pass_load() function and merge it to the soc_tplg_load_header() body. - Add more Tested-by tags. v2: - Change the internal used array to be 'static' to fix the issue reported by: kbuild test robot <lkp@intel.com> - Add testing coverage including Intel SST driver also. v1: - Initial version. Keyon Jie (2): ASoC: topology: refine and log the header in the correct pass ASoC: topology: remove the redundant pass checks sound/soc/soc-topology.c | 96 ++++++++++++++++------------------------ 1 file changed, 38 insertions(+), 58 deletions(-) -- 2.25.1
-
Xiyu Yang authored
fsl_asrc_dma_hw_params() invokes dma_request_channel() or fsl_asrc_get_dma_channel(), which returns a reference of the specified dma_chan object to "pair->dma_chan[dir]" with increased refcnt. The reference counting issue happens in one exception handling path of fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End, the function forgets to decrease the refcnt increased by dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt leak. Fix this issue by calling dma_release_channel() when config DMA channel failed. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan.edu.cnSigned-off-by:
-
derek.fang authored
Avoid noise under bypass boost mode. Signed-off-by:
derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1590750310-30085-1-git-send-email-derek.fang@realtek.comSigned-off-by:
-
Dan Murphy authored
Fix dt-binding-check issue ti,gpi-config:0:0: 4 is greater than the maximum of 1 ti,gpi-config:0:1: 5 is greater than the maximum of 1 ti,gpi-config:0:2: 6 is greater than the maximum of 1 ti,gpi-config:0:3: 7 is greater than the maximum of 1 Reported-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Dan Murphy <dmurphy@ti.com> Reviewed-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200529012230.5863-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Keyon Jie authored
As we have check the 'pass' in the soc_elem_pass_load(), so no need to check it again in each specific elem_load function, at the same time, the tplg->pos will be reset to the next header base when the pass is mismatched, so the increasing of the tplg->pos in these cases made no sense. Here remove all of them. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Tested-by:
Vamshi Kerishna Gopal <vamshi.krishna.gopal@intel.com> Tested-by:
Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by:
-
Keyon Jie authored
The check (tplg->pass == le32_to_cpu(hdr->type)) makes no sense as it is comparing two different enums, refine the element loading functions, and log the information when the header is being parsed in the corresponding parsing pass. Signed-off-by:
-
- 28 May, 2020 5 commits
-
-
Ravulapati Vishnu vardhan rao authored
In DMA pointer the initialzation of instance is of no use. In fact it will reinitialize the instance variable which is already opened and functional. Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/1590652337-21587-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
Chuhong Yuan authored
sta32x_probe() forgets to call undo functions when it fails, add the missed function calls to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20200528102004.911653-1-hslester96@gmail.comSigned-off-by:
-
Arnd Bergmann authored
With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the driver, we can easily get a build failure when I2C is built-in but soundwire is not: WARNING: unmet direct dependencies detected for SND_SOC_RT5682 Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y]) Selected by [y]: - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y] Selected by [m]: - SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y]) Rework the driver to have three separate modules, with the main driver just dealing with the common bits and the actual initialization as part of i2c and sdw specific modules. The conversion is fairly mechanical to keep it easy to review, i.e. it moves code around with the minimal required renaming and changes. Fixes: 6b8e4e7d ("ASoC: amd: Add machine driver for Raven based platform") Fixes: fd443a20 ("ASoC: rt5682: fix I2C/Soundwire dependencies") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Seven Lee authored
The nau8810 driver can also compatible with nau8812 and nau8814. Signed-off-by:
Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20200528070510.29959-1-wtli@nuvoton.comSigned-off-by:
-
Paul Cercueil authored
All boards with Ingenic SoCs probe with devicetree already, we have no use for a non-devicetree path. This solves some compilation warnings that were caused by unused variables in the case where CONFIG_OF was disabled. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200523125455.12392-1-paul@crapouillou.netSigned-off-by:
-
- 27 May, 2020 16 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: finalize Baytrail/CherryTrail support" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This long-overdue patchset adds missing system suspend/resume support and hardens the IPC to solve module load/unload issues on specific devices such as Cyan Chromebook. With this series SOF is finally iso-feature with the legacy driver. Thanks to Ranjani and Keyon for the basic patches and Enric for testing. The last part needed for Baytrail/Cherrytrail is simplification of the driver/card names and turn-key UCM support (on-going work with Jaroslav). Keyon Jie (1): ASoC: SOF: Intel: BYT: harden IPC initialization and handling Pierre-Louis Bossart (3): ASoC: Intel: bytcr_rt5640/51: remove .ignore_suspend ASoC: Intel: byt/cht: add .pm_ops ASoC: SOF: Intel: BYT: mask BUSY or DONE interrupts in handler Ranjani Sridharan (4): ASoC: SOF: Intel: byt: Add PM callbacks ASoC: SOF: pm: handle resume on legacy Intel platforms ASoC: SOF: ipc: ignore DSP replies received when they are not expected ASoC: SOF: Intel: BYT: add .remove op sound/soc/intel/boards/bytcht_cx2072x.c | 3 + sound/soc/intel/boards/bytcht_da7213.c | 3 + sound/soc/intel/boards/bytcht_es8316.c | 3 + sound/soc/intel/boards/bytcr_rt5640.c | 7 +- sound/soc/intel/boards/bytcr_rt5651.c | 6 +- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 3 + sound/soc/intel/boards/cht_bsw_nau8824.c | 3 + sound/soc/intel/boards/cht_bsw_rt5645.c | 3 + sound/soc/intel/boards/cht_bsw_rt5672.c | 3 + sound/soc/sof/intel/byt.c | 116 ++++++++++++++----- sound/soc/sof/ipc.c | 9 +- sound/soc/sof/pm.c | 8 +- sound/soc/sof/sof-priv.h | 2 +- 13 files changed, 122 insertions(+), 47 deletions(-) base-commit: 0d71a5cf -- 2.20.1
-
Wei Yongjun authored
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20200527030210.124393-1-weiyongjun1@huawei.comSigned-off-by:
-
Dan Murphy authored
Fix the warnings when using the W=1 compiler flag. sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_reset’: sound/soc/codecs/tlv320adcx140.c:570:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 570 | int ret = 0; | ^~~ This was set but only used in case where the reset GPIO is not defined. Have the function return the value of ret. sound/soc/codecs/tlv320adcx140.c: In function ‘adcx140_codec_probe’: sound/soc/codecs/tlv320adcx140.c:778:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 778 | if (bias_source < ADCX140_MIC_BIAS_VAL_VREF || | ^ sound/soc/codecs/tlv320adcx140.c:789:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 789 | if (vref_source < ADCX140_MIC_BIAS_VREF_275V || This condition will not occur since if the dt property is not set then the *_source variable is set to the default value. So there is no way that *_source can be less then 0. Which is what each #define is set to. The code just needs to make sure that the dt property is not out of the upper bounds. Reported-by: -
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200527024625.9937-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Dan Murphy authored
Add support to configure the GPI pins to the specific configuration. The pins can be disabled or be configured as data input for any of the digital mic channels. In addition the GPI can be used a a general purpose input, a Master clock input or an ASI input for daisy chaining devices. Signed-off-by:
-
Dan Murphy authored
Add an array property that configures the General Purpose Input (GPI) register. The device has 4 GPI pins and each pin can be configured in 1 of 7 different ways. Signed-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Keyon Jie authored
On probe and reset, we should not touch the SHIM_IMRD register since it is configured by firmware. The driver only configures SHIM_IMRX with the BUSY interrupt enabled by default and DONE interrupt disabled. When sending an IPC message, the DONE interrupt is enabled until the DSP response is provided. This sequence hardens the IPC communication and avoid interrupt-related issues when adding/removing modules or during system suspend-resume transitions. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
-
Pierre-Louis Bossart authored
The DSP may send the same interrupt multiple times before it's handled in the interrupt thread. Rather than masking it in the thread, mask it in the handler directly. This patch also removes useless checks that cannot happen, and masks that are set don't need to be re-tested. Suggested-by:
-
Ranjani Sridharan authored
Add .remove op that disables interrupts and reset the DSP for BYT and CHT platforms. Signed-off-by:
-
Ranjani Sridharan authored
We currently ignore the reply messages from the DSP when they are not expected but call it out as an error. Change the error message to a debug message. Signed-off-by:
-
Pierre-Louis Bossart authored
Add required .pm_ops to support suspend/resume on baytrail/cherrytrail machines. This .pm_ops is conditionally-added to avoid impacting the legacy driver where power management is handled differently. Signed-off-by:
-
Pierre-Louis Bossart authored
Low-power playback was never enabled on Baytrail devices, remove what looks like copy/paste from other machine drivers which were never submitted upstream. Signed-off-by:
-
Ranjani Sridharan authored
Add new case when set_power_state() is not supported, e.g. for Intel Baytrail/Cherrytrail legacy platforms. Signed-off-by:
-
Ranjani Sridharan authored
Add the PM callbacks for BYT/CHT platforms. Signed-off-by:
-
- 26 May, 2020 4 commits
-
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
-
Qiushi Wu authored
Function "pm_runtime_get_sync()" is not handled by "pm_runtime_put()" if "PTR_ERR(rst) == -EPROBE_DEFER". Fix this issue by adding "pm_runtime_put()" into this error path. Fixes: f65bb92c ("ASoC: img-i2s-in: Add runtime PM") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200525055011.31925-1-wu000273@umn.eduSigned-off-by:
-
Dinghao Liu authored
When clk_set_parent() returns an error code, a pairing runtime PM usage counter increment is needed to keep the counter balanced. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200525085848.4227-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
kbuild test robot authored
sound/soc/codecs/zl38060.c:298:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 52e8a94b ("ASoC: Add initial ZL38060 driver") Signed-off-by:
-
- 25 May, 2020 1 commit
-
-
Mark Brown authored
Hi Mark Current ALSA SoC is handling dai_link related operation, but it is implmemented directly without using function/macro, and at random place. This v4 patch-set creates new snd_soc_link_xxx() functions which handles dai_link related operation, and implmement these at new soc-link.c. v3 -> v4 - add Reviewed-by from Ranjani and Pierre-Louis - fix bisection error at [2/7] v2 -> v3 - add missing #include <sound/soc-link.h> in soc-link.c v1 -> v2 - #include <sound/soc-link.h> is added on each c source file instead of soc.h - not have extra error message after snd_soc_link_xxx(), because it already indicate it via snc_link_ret() - snd_soc_link_compr_xxx() doesn't have rtd parameter, because it can be created from cstream Link: https://lore.kernel.org/r/87lflk4yk3.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/874ksa59wc.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/877dx868op.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (7): ASoC: add soc-link.c ASoC: soc-link: move soc_rtd_xxx() ASoC: soc-link: remove unneeded parameter from snd_soc_link_xxx() ASoC: soc-link: add snd_soc_link_be_hw_params_fixup() ASoC: soc-link: add snd_soc_link_compr_startup() ASoC: soc-link: add snd_soc_link_compr_shutdown() ASoC: soc-link: add snd_soc_link_compr_set_params() include/sound/soc-link.h | 27 +++++++ sound/soc/Makefile | 2 +- sound/soc/soc-compress.c | 46 ++++-------- sound/soc/soc-core.c | 18 ++--- sound/soc/soc-dai.c | 9 ++- sound/soc/soc-link.c | 150 +++++++++++++++++++++++++++++++++++++++ sound/soc/soc-pcm.c | 86 ++++------------------ 7 files changed, 219 insertions(+), 119 deletions(-) create mode 100644 include/sound/soc-link.h create mode 100644 sound/soc/soc-link.c -- 2.17.1 Thank you for your help !! Best regards --- Kuninori Morimoto
-
