- 02 Apr, 2015 36 commits
-
-
Hans Verkuil authored
Make sure the format fields are reported consistently. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The debug attribute was renamed to dev_debug. Update the doc accordingly. Signed-off-by:
-
Lad, Prabhakar authored
Embed video_device struct (video_dev) in vpfe_device and Unregister path doesn't need to free the video_device structure, hence, change the video_device.release callback point to video_device_release_empty. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
return error in case devm_kzalloc() fails. Signed-off-by:
-
Lad, Prabhakar authored
Instead of matching the subdevs with their name, match it with OF node/ i2c address and adapter number. Signed-off-by:
-
Tapasweni Pathak authored
Check for dev_fmt being null before derefrencing it, to assign it to planes. Found using Coccinelle. Signed-off-by:
Tapasweni Pathak <tapaswenipathak@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Masatake YAMATO authored
In am437x-vpfe.h BASE_VIDIOC_PRIVATE is used for making the name of ioctl command(VIDIOC_AM437X_CCDC_CFG). The definition of BASE_VIDIOC_PRIVATE is in linux/videodev2.h. However, linux/videodev2.h is not included in am437x-vpfe.h. As the result an application using has to include both am437x-vpfe.h and linux/videodev2.h. With this patch, the application can include just am437x-vpfe.h. Signed-off-by:
Masatake YAMATO <yamato@redhat.com> Acked-by:
-
Hans Verkuil authored
Return -EINVAL if read() or write() is not supported by the queue. This makes it possible to provide both vb2_fop_read and vb2_fop_write in a struct v4l2_file_operations since the vb2_fop_* function will check if the file operation is allowed. A similar check exists in __vb2_init_fileio() which is called from __vb2_perform_fileio(), but that check is only done if no file I/O is active. So the sequence of read() followed by write() would be allowed, which is obviously a bug. In addition, vb2_fop_write/read should always return -EINVAL if the operation is not allowed, and by putting the check in the lower levels of the code it is possible that other error codes are returned (EBUSY or ERESTARTSYS). All these issues are avoided by just doing a quick explicit check. Signed-off-by:
-
Laurent Pinchart authored
The remote port reference is released both at the end of the OF graph parsing loop, and in the error code path at the end of the function. Those two calls will release the same reference, causing the reference count to go negative. Fix the problem by removing the second call. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Laurent Pinchart authored
Frame intervals exposed as an interval and step (so-called step-wise) are restricted by the V4L2 API to a single enumeration entry. Return an error when the index is not zero. Reported-by:
Alexey Smirnoff <fling@member.fsf.org> Signed-off-by:
-
Laurent Pinchart authored
The device is based on an Aveo chipset, implements UVC but advertises a vendor-specific class on all interfaces. Support it by listing the USB VID:PID explicitly. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 has long been subject to AB-BA style deadlocks due to the queue lock and mmap_sem being taken in different orders for the mmap and get_unmapped_area operations. The problem has been fixed by making those two operations callable without taking the queue lock, using an mmap_lock internal to videobuf2. The uvcvideo driver still calls the mmap and get_unmapped_area operations with the queue lock held, resulting in a potential deadlock. As the operations can now be called without locking the queue, fix it. Reported-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Sakari Ailus authored
pixel_order_str is only referred to in smiapp-core.c, it should be thus static. Thanks to Hans Verkuil for pointing this out. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Sakari Ailus authored
of_property_read_u64_array() wasn't yet part of the kernel tree when the functionality was needed. Do use it now. Signed-off-by:
-
Sakari Ailus authored
This reverts commit cb88d738. Signed-off-by:
-
Marek Szyprowski authored
Unsigned int cannot be used to store casted pointer on 64bit architecture, so correct such casts to properly use unsigned long variables. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> [k.debski@samsung.com: removed volatile and __iomem from cast] Signed-off-by:
-
Marek Szyprowski authored
TASK_SIZE is depends on the systems architecture (32 or 64 bits) and it should not be used for defining offset boundary for mmaping buffers for CAPTURE and OUTPUT queues. This patch fixes support for MMAP calls on the CAPTURE queue on 64bit architectures (like ARM64). Signed-off-by:
-
Sakari Ailus authored
Print a warning when the driver is used with platform data. Existing platform data users should move to DT now. Signed-off-by:
-
Sakari Ailus authored
Add the ISP device to omap3 DT include file and add support to the driver to use it. Also obtain information on the external entities and the ISP configuration related to them through the Device Tree in addition to the platform data. Signed-off-by:
-
Sakari Ailus authored
Add lane_polarities field to struct v4l2_of_bus_mipi_csi2 and write the contents of the lane-polarities property to it. The field tells the polarity of the physical lanes starting from the first one. Any unused lanes are ignored, i.e. only the polarity of the used lanes is specified. Also rework reading the "data-lanes" property a little. Signed-off-by:
-
Sakari Ailus authored
Add lane-polarity property to endpoint nodes. This essentially tells that the order of the differential signal wires is inverted. Signed-off-by:
-
Sakari Ailus authored
The omap3isp MMIO register block is contiguous in the MMIO register space apart from the fact that the ISP IOMMU register block is in the middle of the area. Ioremap it at two occasions, and keep the rest of the layout of the register space internal to the omap3isp driver. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Sakari Ailus authored
The syscon register isn't part of the ISP, use it through the syscom driver regmap instead. The syscom block is considered to be from 343x on ISP revision 2.0 whereas 15.0 is assumed to have 3630 syscon. Signed-off-by:
-
Sakari Ailus authored
Only the histogram sub-block driver uses the physical address. Do not store it for other sub-blocks. Signed-off-by:
-
Sakari Ailus authored
The video port clock is l3_ick divided by vpclk_div. This clock must be high enough for the external pixel rate. The video port requires two clock cycles to process a pixel. Signed-off-by:
-
Sakari Ailus authored
Rename VDD_CSIPHY1 as vdd-csiphy1 and VDD_CSIPHY2 as vdd-csiphy2. Signed-off-by:
-
Sakari Ailus authored
Make omap3isp configuration data structures more suitable for consumption by the DT by separating the I2C bus information of all the sub-devices in a group and the ISP bus information from each other. The ISP bus information is made a pointer instead of being directly embedded in the struct. In the case of the DT only the sensor specific information on the ISP bus configuration is retained. The structs are renamed to reflect that. After this change the structs needed to describe device configuration can be allocated and accessed separately without those needed only in the case of platform data. The platform data related structs can be later removed once the support for platform data can be removed. Signed-off-by:
-
Sakari Ailus authored
Only check for call platform data callback functions if there's platform data. Also take care of a few other cases where the NULL pdata pointer could have been accessed, and remove the check for NULL dev->platform_data pointer. Removing the check for NULL dev->platform_data isn't strictly needed by the DT support but there's no harm from that either: the device now can be used without sensors, for instance. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Sakari Ailus authored
Move the code which connects the external entity to an ISP entity into a separate function. This disconnects it from parsing the platform data. Signed-off-by:
-
Sakari Ailus authored
If an uninitialised v4l2_subdev struct was passed to media_entity_create_link(), one of the BUG_ON()'s in the function will be hit since media_entity.num_pads will be zero. Avoid this by checking whether the num_pads field is non-zero for the interface. Signed-off-by:
-
Sakari Ailus authored
The mutex was not destroyed correctly if dma_coerce_mask_and_coherent() failed for some reason. Signed-off-by:
-
Laurent Pinchart authored
Replace the custom OMAP DMA API usage by DMA engine. Feature-wise the driver has lost the ability to get notified of DMA transfers failure through the completion handler, as the DMA engine API doesn't expose that status information. Signed-off-by:
-
Laurent Pinchart authored
Replace the open-coded copy by a function call. Signed-off-by:
-
Lad, Prabhakar authored
There isn't a need to assign the state of vb2_buffer to active as this is already done by the core. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 has long been subject to AB-BA style deadlocks due to the queue lock and mmap_sem being taken in different orders for the mmap operation. The problem has been fixed by making this operation callable without taking the queue lock, using an mmap_lock internal to videobuf2. The omap3isp driver still calls the mmap operation with the queue lock held, resulting in a potential deadlock. As the operation can now be called without locking the queue, fix it. Signed-off-by:
-
- 01 Apr, 2015 3 commits
-
-
Markus Elfring authored
The release_firmware() function was called in three cases by the mn88472_init() function during error handling even if the passed variable "fw" contained still a null pointer. This implementation detail could be improved by the introduction of another jump label. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The release_firmware() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Olli Salonen authored
The Si2157 tuner supports ATSC in addition to DVB-T and DVB-C. Extend minimum frequency range to cover the complete ATSC/QAM-B range. Signed-off-by:
Olli Salonen <olli.salonen@iki.fi> Signed-off-by:
-
- 23 Mar, 2015 1 commit
-
-
Hans Verkuil authored
The video and pad ops are duplicates, so get rid of the more limited video op. The whole point of the subdev API is to allow reuse of subdev drivers by bridge drivers. Having duplicate ops makes that much harder. We should never have allowed duplicate ops in the first place. A lesson for the future. Signed-off-by:
-
