- 17 Jun, 2015 15 commits
-
-
WANG Cong authored
[ Upstream commit 86e363dc ] For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [<ffffffff81a44e7f>] dump_stack+0x4c/0x65 [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98 [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48 [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a [<ffffffff814e725b>] __list_del_entry+0x5a/0x98 [<ffffffff814e72a7>] list_del+0xe/0x2d [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20 [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6 [<ffffffff81822676>] qdisc_graft+0x11d/0x243 [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4 [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226 [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17 [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d [<ffffffff818544b2>] netlink_unicast+0xcb/0x150 [<ffffffff81161db9>] ? might_fault+0x59/0xa9 [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37 [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72 [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32 [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76 [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff811b14d5>] ? __fget_light+0x50/0x78 [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60 [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Ross Lagerwall authored
[ Upstream commit ce0e5c52 ] Commit e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct") introduced a regression when moving queue-specific data into the queue struct by failing to set the credit_bytes field. This prevented bandwidth limiting from working. Initialize the field as it was done before multiqueue support was added. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Mark Salyzyn authored
[ Upstream commit b48732e4 ] got a rare NULL pointer dereference in clear_bit Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by:
-
Richard Cochran authored
[ Upstream commit adbe088f ] A pair of nested spin locks was introduced in commit 63502b8d "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
[ Upstream commit a935865c ] Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by:
-
Richard Cochran authored
[ Upstream commit 397a253a ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 3f7352bf ] x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f ("net: filter: Just In Time compiler for x86-64") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
-
Vlad Yasevich authored
[ Upstream commit d66bf7dd ] The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Nick Meier authored
commit 5ef5b692 upstream. HV_CRASH_CTL_CRASH_NOTIFY is a 64 bit number. Depending on the usage context, the value may be truncated. This patch is in response from the following email from Wu Fengguang <fengguang.wu@intel.com>: From: Wu Fengguang <fengguang.wu@intel.com> Subject: [char-misc:char-misc-testing 25/45] drivers/hv/vmbus_drv.c:67:9: sparse: constant 0x8000000000000000 is so big it is unsigned long tree: git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-testing head: b3de8e37 commit: 96c1d058 [25/45] Drivers: hv: vmbus: Add support for VMBus panic notifier handler reproduce: # apt-get install sparse git checkout 96c1d058 make ARCH=x86_64 allmodconfig make C=1 CF=-D__CHECK_ENDIAN__ sparse warnings: (new ones prefixed by >>) drivers/hv/vmbus_drv.c:67:9: sparse: constant 0x8000000000000000 is so big it is unsigned long ... Signed-off-by:
Nick Meier <nmeier@microsoft.com> Reported-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
-
Nick Meier authored
commit 96c1d058 upstream. BugLink: http://bugs.launchpad.net/bugs/1463584 Hyper-V allows a guest to notify the Hyper-V host that a panic condition occured. This notification can include up to five 64 bit values. These 64 bit values are written into crash MSRs. Once the data has been written into the crash MSRs, the host is then notified by writing into a Crash Control MSR. On the Hyper-V host, the panic notification data is captured in the Windows Event log as a 18590 event. Crash MSRs are defined in appendix H of the Hypervisor Top Level Functional Specification. At the time of this patch, v4.0 is the current functional spec. The URL for the v4.0 document is: http://download.microsoft.com/download/A/B/4/AB43A34E-BDD0-4FA6-BDEF-79EEF16E880B/Hypervisor Top Level Functional Specification v4.0.docx Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
-
Malcolm Priestley authored
commit 95775d12 upstream. The device must not flip to page 1 while in interrupt lock causing loss of connection or dead lock. Protect from changes to page by adding lock where user can change the page in CARDvSetRSPINF, vnt_configure and set_channel Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit d65d2b25 upstream. The state of m_td0TD0.f1Owner should change after the buff_addr has been filled otherwise the device grabs the buffer too early. m_td0TD0.f1Owner is protected by memory barriers on both sides of change. iTDUsed is best incremented after MACvTransmit. It appears that f1Owner actually polls to do the memory transfer. A back port patch will be needed for v3.19 Signed-off-by:
-
Malcolm Priestley authored
commit c3125305 upstream. There is still a problem that dma_idx is causing packets to go onto the wrong tx path. Protect dma_idx fully with the present first lock and use pTDInfo->byFlags TD_FLAGS_NETIF_SKB to set MACvTransmit. Signed-off-by:
-
Malcolm Priestley authored
commit d17f4c8a upstream. Allow only TD_FLAGS_NETIF_SKB on ring buffer TYPE_AC0DMA for data only transfers for correct reporting of tx rates. Signed-off-by:
-
Malcolm Priestley authored
commit 187e2a81 upstream. Keep setting of this part of the structure with the others. Only pTDInfo needs carried in the buffer structure. Signed-off-by:
-
- 16 Jun, 2015 25 commits
-
-
Florent Fourcot authored
commit 21858cd0 upstream. commit 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by:
-
Michal Kubeček authored
commit 27596472 upstream. When replacing an IPv6 multipath route with "ip route replace", i.e. NLM_F_CREATE | NLM_F_REPLACE, fib6_add_rt2node() replaces only first matching route without fixing its siblings, resulting in corrupted siblings linked list; removing one of the siblings can then end in an infinite loop. IPv6 ECMP implementation is a bit different from IPv4 so that route replacement cannot work in exactly the same way. This should be a reasonable approximation: 1. If the new route is ECMP-able and there is a matching ECMP-able one already, replace it and all its siblings (if any). 2. If the new route is ECMP-able and no matching ECMP-able route exists, replace first matching non-ECMP-able (if any) or just add the new one. 3. If the new route is not ECMP-able, replace first matching non-ECMP-able route (if any) or add the new route. We also need to remove the NLM_F_REPLACE flag after replacing old route(s) by first nexthop of an ECMP route so that each subsequent nexthop does not replace previous one. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Henning Rogge authored
commit 33b4b015 upstream. Commit <5cf3d461> ("udp: Simplify__udp*_lib_mcast_deliver") simplified the filter for incoming IPv6 multicast but removed the check of the local socket address and the UDP destination address. This patch restores the filter to prevent sockets bound to a IPv6 multicast IP to receive other UDP traffic link unicast. Signed-off-by:
Henning Rogge <hrogge@gmail.com> Fixes: 5cf3d461 ("udp: Simplify__udp*_lib_mcast_deliver") Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
-
Michal Kubeček authored
commit 35f1b4e9 upstream. If adding a nexthop of an IPv6 multipath route fails, comment in ip6_route_multipath() says we are going to delete all nexthops already added. However, current implementation deletes even the routes it hasn't even tried to add yet. For example, running ip route add 1234:5678::/64 \ nexthop via fe80::aa dev dummy1 \ nexthop via fe80::bb dev dummy1 \ nexthop via fe80::cc dev dummy1 twice results in removing all routes first command added. Limit the second (delete) run to nexthops that succeeded in the first (add) run. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by:
-
Eric W. Biederman authored
commit 381c759d upstream. ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
-
Bjørn Mork authored
commit 44f6731d upstream. The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by:
Florian Bruhin <me@the-compiler.org> Fixes: 7a1e890e ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
commit 47cc84ce upstream. When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by:
-
Florian Fainelli authored
commit 7e140696 upstream. RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
commit b3cad287 upstream. In compliance with RFC5961, the network stack send challenge ACK in response to spurious SYN packets, since commit 0c228e83 ("tcp: Restore RFC5961-compliant behavior for SYN packets"). This pose a problem for netfilter conntrack in state LAST_ACK, because this challenge ACK is (falsely) seen as ACKing last FIN, causing a false state transition (into TIME_WAIT). The challenge ACK is hard to distinguish from real last ACK. Thus, solution introduce a flag that tracks the potential for seeing a challenge ACK, in case a SYN packet is let through and current state is LAST_ACK. When conntrack transition LAST_ACK to TIME_WAIT happens, this flag is used for determining if we are expecting a challenge ACK. Scapy based reproducer script avail here: https://github.com/netoptimizer/network-testing/blob/master/scapy/tcp_hacks_3WHS_LAST_ACK.py Fixes: 0c228e83 ("tcp: Restore RFC5961-compliant behavior for SYN packets") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Daniel Borkmann authored
commit c78e1746 upstream. Vijay reported that a loop as simple as ... while true; do tc qdisc add dev foo root handle 1: prio tc filter add dev foo parent 1: u32 match u32 0 0 flowid 1 tc qdisc del dev foo root rmmod cls_u32 done ... will panic the kernel. Moreover, he bisected the change apparently introducing it to 78fd1d0a ("netlink: Re-add locking to netlink_lookup() and seq walker"). The removal of synchronize_net() from the netlink socket triggering the qdisc to be removed, seems to have uncovered an RCU resp. module reference count race from the tc API. Given that RCU conversion was done after e341694e ("netlink: Convert netlink_lookup() to use RCU protected hash table") which added the synchronize_net() originally, occasion of hitting the bug was less likely (not impossible though): When qdiscs that i) support attaching classifiers and, ii) have at least one of them attached, get deleted, they invoke tcf_destroy_chain(), and thus call into ->destroy() handler from a classifier module. After RCU conversion, all classifier that have an internal prio list, unlink them and initiate freeing via call_rcu() deferral. Meanhile, tcf_destroy() releases already reference to the tp->ops->owner module before the queued RCU callback handler has been invoked. Subsequent rmmod on the classifier module is then not prevented since all module references are already dropped. By the time, the kernel invokes the RCU callback handler from the module, that function address is then invalid. One way to fix it would be to add an rcu_barrier() to unregister_tcf_proto_ops() to wait for all pending call_rcu()s to complete. synchronize_rcu() is not appropriate as under heavy RCU callback load, registered call_rcu()s could be deferred longer than a grace period. In case we don't have any pending call_rcu()s, the barrier is allowed to return immediately. Since we came here via unregister_tcf_proto_ops(), there are no users of a given classifier anymore. Further nested call_rcu()s pointing into the module space are not being done anywhere. Only cls_bpf_delete_prog() may schedule a work item, to unlock pages eventually, but that is not in the range/context of cls_bpf anymore. Fixes: 25d8c0d5 ("net: rcu-ify tcf_proto") Fixes: 9888faef ("net: sched: cls_basic use RCU") Reported-by:
Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
commit ed2a80ab upstream. Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e56 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko <jiri@resnulli.us> Reported-by:
Julien Meunier <julien.meunier@6wind.com> Signed-off-by:
-
Tommi Rantala authored
commit f30bf2a5 upstream. Fix memory leak introduced in commit a0840e2e ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct."): unreferenced object 0xffff88005785b800 (size 2048): comm "(-localed)", pid 1434, jiffies 4294755650 (age 1421.089s) hex dump (first 32 bytes): bb 89 0b 83 ff ff ff ff b0 78 f0 4e 00 88 ff ff .........x.N.... 04 00 00 00 a4 01 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8262ea8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811fba74>] __kmalloc_track_caller+0x244/0x430 [<ffffffff811b88a0>] kmemdup+0x20/0x50 [<ffffffff823276b7>] ip_vs_control_net_init+0x1f7/0x510 [<ffffffff8231d630>] __ip_vs_init+0x100/0x250 [<ffffffff822363a1>] ops_init+0x41/0x190 [<ffffffff82236583>] setup_net+0x93/0x150 [<ffffffff82236cc2>] copy_net_ns+0x82/0x140 [<ffffffff810ab13d>] create_new_namespaces+0xfd/0x190 [<ffffffff810ab49a>] unshare_nsproxy_namespaces+0x5a/0xc0 [<ffffffff810833e3>] SyS_unshare+0x173/0x310 [<ffffffff8265cbd7>] system_call_fastpath+0x12/0x6f [<ffffffffffffffff>] 0xffffffffffffffff Fixes: a0840e2e ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.") Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Harald Freudenberger authored
commit a1cae34e upstream. Multitheaded tests showed that the icv buffer in the current ghash implementation is not handled correctly. A move of this working ghash buffer value to the descriptor context fixed this. Code is tested and verified with an multithreaded application via af_alg interface. Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Gerald Schaefer <geraldsc@linux.vnet.ibm.com> Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Alex Deucher authored
commit 0f28d128 upstream. Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ilya Dryomov authored
commit 521a04d0 upstream. This reverts commit ba9d114e. .. which introduced a regression that prevented all lingering requests requeued in kick_requests() from ever being sent to the OSDs, resulting in a lot of missed notifies. In retrospect it's pretty obvious that r_req_lru_item item in the case of lingering requests can be used not only for notarget, but also for unsent linkage due to how tightly actual map and enqueue operations are coupled in __map_request(). The assertion that was being silenced is taken care of in the previous ("libceph: request a new osdmap if lingering request maps to no osd") commit: by always kicking homeless lingering requests we ensure that none of them ends up on the notarget list outside of the critical section guarded by request_mutex. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit b0494532 upstream. This commit does two things. First, if there are any homeless lingering requests, we now request a new osdmap even if the osdmap that is being processed brought no changes, i.e. if a given lingering request turned homeless in one of the previous epochs and remained homeless in the current epoch. Not doing so leaves us with a stale osdmap and as a result we may miss our window for reestablishing the watch and lose notifies. MON=1 OSD=1: # cat linger-needmap.sh #!/bin/bash rbd create --size 1 test DEV=$(rbd map test) ceph osd out 0 rbd map dne/dne # obtain a new osdmap as a side effect (!) sleep 1 ceph osd in 0 rbd resize --size 2 test # rbd info test | grep size -> 2M # blockdev --getsize $DEV -> 1M N.B.: Not obtaining a new osdmap in between "osd out" and "osd in" above is enough to make it miss that resize notify, but that is a bug^Wlimitation of ceph watch/notify v1. Second, homeless lingering requests are now kicked just like those lingering requests whose mapping has changed. This is mainly to recognize that a homeless lingering request makes no sense and to preserve the invariant that a registered lingering request is not sitting on any of r_req_lru_item lists. This spares us a WARN_ON, which commit ba9d114e ("libceph: clear r_req_lru_item in __unregister_linger_request()") tried to fix the _wrong_ way. Signed-off-by:
-
Liang Li authored
commit c447e76b upstream. The MPX feature requires eager KVM FPU restore support. We have verified that MPX cannot work correctly with the current lazy KVM FPU restore mechanism. Eager KVM FPU restore should be enabled if the MPX feature is exposed to VM. Signed-off-by:
Yang Zhang <yang.z.zhang@intel.com> Signed-off-by:
Liang Li <liang.z.li@intel.com> [Also activate the FPU on AMD processors. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 0fdd74f7 upstream. This reverts commit 4473b570. We'll use the hook again. Signed-off-by:
-
Andrea Arcangeli authored
commit e8fd5e9e upstream. memslot->userfault_addr is set by the kernel with a mmap executed from the kernel but the userland can still munmap it and lead to the below oops after memslot->userfault_addr points to a host virtual address that has no vma or mapping. [ 327.538306] BUG: unable to handle kernel paging request at fffffffffffffffe [ 327.538407] IP: [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.538474] PGD 1a01067 PUD 1a03067 PMD 0 [ 327.538529] Oops: 0000 [#1] SMP [ 327.538574] Modules linked in: macvtap macvlan xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT iptable_filter ip_tables tun bridge stp llc rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xprtrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ipmi_devintf iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp dcdbas intel_rapl kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd pcspkr sb_edac edac_core ipmi_si ipmi_msghandler acpi_pad wmi acpi_power_meter lpc_ich mfd_core mei_me [ 327.539488] mei shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc mlx4_ib ib_sa ib_mad ib_core mlx4_en vxlan ib_addr ip_tunnel xfs libcrc32c sd_mod crc_t10dif crct10dif_common crc32c_intel mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm ahci i2c_core libahci mlx4_core libata tg3 ptp pps_core megaraid_sas ntb dm_mirror dm_region_hash dm_log dm_mod [ 327.539956] CPU: 3 PID: 3161 Comm: qemu-kvm Not tainted 3.10.0-240.el7.userfault19.4ca4011.x86_64.debug #1 [ 327.540045] Hardware name: Dell Inc. PowerEdge R420/0CN7CM, BIOS 2.1.2 01/20/2014 [ 327.540115] task: ffff8803280ccf00 ti: ffff880317c58000 task.ti: ffff880317c58000 [ 327.540184] RIP: 0010:[<ffffffff811a7b55>] [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.540261] RSP: 0018:ffff880317c5bcf8 EFLAGS: 00010246 [ 327.540313] RAX: 00057ffffffff000 RBX: ffff880616a20000 RCX: 0000000000000000 [ 327.540379] RDX: 0000000000002014 RSI: 00057ffffffff000 RDI: fffffffffffffffe [ 327.540445] RBP: ffff880317c5bd10 R08: 0000000000000103 R09: 0000000000000000 [ 327.540511] R10: 0000000000000000 R11: 0000000000000000 R12: fffffffffffffffe [ 327.540576] R13: 0000000000000000 R14: ffff880317c5bd70 R15: ffff880317c5bd50 [ 327.540643] FS: 00007fd230b7f700(0000) GS:ffff880630800000(0000) knlGS:0000000000000000 [ 327.540717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 327.540771] CR2: fffffffffffffffe CR3: 000000062a2c3000 CR4: 00000000000427e0 [ 327.540837] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 327.540904] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 327.540974] Stack: [ 327.541008] ffffffffa05d6d0c ffff880616a20000 0000000000000000 ffff880317c5bdc0 [ 327.541093] ffffffffa05ddaa2 0000000000000000 00000000002191bf 00000042f3feab2d [ 327.541177] 00000042f3feab2d 0000000000000002 0000000000000001 0321000000000000 [ 327.541261] Call Trace: [ 327.541321] [<ffffffffa05d6d0c>] ? kvm_vcpu_reload_apic_access_page+0x6c/0x80 [kvm] [ 327.543615] [<ffffffffa05ddaa2>] vcpu_enter_guest+0x3f2/0x10f0 [kvm] [ 327.545918] [<ffffffffa05e2f10>] kvm_arch_vcpu_ioctl_run+0x2b0/0x5a0 [kvm] [ 327.548211] [<ffffffffa05e2d02>] ? kvm_arch_vcpu_ioctl_run+0xa2/0x5a0 [kvm] [ 327.550500] [<ffffffffa05ca845>] kvm_vcpu_ioctl+0x2b5/0x680 [kvm] [ 327.552768] [<ffffffff810b8d12>] ? creds_are_invalid.part.1+0x12/0x50 [ 327.555069] [<ffffffff810b8d71>] ? creds_are_invalid+0x21/0x30 [ 327.557373] [<ffffffff812d6066>] ? inode_has_perm.isra.49.constprop.65+0x26/0x80 [ 327.559663] [<ffffffff8122d985>] do_vfs_ioctl+0x305/0x530 [ 327.561917] [<ffffffff8122dc51>] SyS_ioctl+0xa1/0xc0 [ 327.564185] [<ffffffff816de829>] system_call_fastpath+0x16/0x1b [ 327.566480] Code: 0b 31 f6 4c 89 e7 e8 4b 7f ff ff 0f 0b e8 24 fd ff ff e9 a9 fd ff ff 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <48> f7 07 00 c0 00 00 55 48 89 e5 75 2a 8b 47 1c 85 c0 74 1e f0 Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
David Vrabel authored
commit 77bb3dfd upstream. A non-percpu VIRQ (e.g., VIRQ_CONSOLE) may be freed on a different VCPU than it is bound to. This can result in a race between handle_percpu_irq() and removing the action in __free_irq() because handle_percpu_irq() does not take desc->lock. The interrupt handler sees a NULL action and oopses. Only use the percpu chip/handler for per-CPU VIRQs (like VIRQ_TIMER). # cat /proc/interrupts | grep virq 40: 87246 0 xen-percpu-virq timer0 44: 0 0 xen-percpu-virq debug0 47: 0 20995 xen-percpu-virq timer1 51: 0 0 xen-percpu-virq debug1 69: 0 0 xen-dyn-virq xen-pcpu 74: 0 0 xen-dyn-virq mce 75: 29 0 xen-dyn-virq hvc_console Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 7cded342 upstream. Git commit 152125b7 "s390/mm: implement dirty bits for large segment table entries" broke the pmd_pfn function, it changed the return value from 'unsigned long' to 'int'. This breaks all machine configurations with memory above the 8TB line. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Mark Hounschell authored
commit 74856fbf upstream. 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by:
Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Ludovic Desroches authored
commit 60c8f783 upstream. clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ansgar Hegerfeld authored
commit 09ea9976 upstream. The Lenovo ThinkPad L450 requires the ALC292_FIXUP_TPT440_DOCK fix in order to get sound output on the docking stations audio port. This patch was tested using a ThinkPad L450 (20DSS00B00) using kernel 4.0.3 and a ThinkPad Pro Dock. Signed-off-by:
Ansgar Hegerfeld <linux@hegerfeld.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Henningsson authored
commit 6ffc0898 upstream. This patch adds support for Conexant HD Audio codecs CX20721, CX20722, CX20723 and CX20724. BugLink: https://bugs.launchpad.net/bugs/1454656Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
