According to the firmware spec, FLOW_STEERING_IB_UC_QP_RANGE command is
supported only if dmfs_ipoib bit is set.

If it isn't set we want to ensure allocating NET_IF QPs fail. We do so
by filling out the allocation bitmap. By thus, the NET_IF QPs allocating
function won't find any free QP and will fail.

Fixes: c1c98501 ('IB/mlx4: Add support for steerable IB UD QPs')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Report the correct speed in the port attributes when using a 56Gbps
ethernet link.  Without this change the field is incorrectly set to 10.

Fixes: a9c766bb ('IB/mlx4: Fix info returned when querying IBoE ports')
Fixes: 2e96691c ('IB: Use central enum for speed instead of hard-coded values')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Use INT_MAX since this is the max value the attribute can hold, though
hardware capability is unlimited.

Fixes: 225c7b1f ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

If OpenSM runs over a ConnectX-3, and there are ConnectX-4 or Connect-IB
VFs active on the network, the OpenSM will receive QP1 packets containing
a GRH where the destination GID is the "Well-Known GID" -- which is not a
GID in the HCA Port's GID Table.

This GID must be tested-for separately -- and packets which contain
this destination GID should be routed to slave 0 (the PF).

Fixes: 37bfc7c1 ('IB/mlx4: SR-IOV multiplex and demultiplex MADs')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When MAD arrives to the hypervisor, we need to identify which slave it
should be sent by destination GID. When L3 protocol is IPv4 the
GRH is replaced by an IPv4 header. This patch detects when IPv4 header
needs to be parsed instead of GRH.

Fixes: b6ffaeff ('mlx4: In RoCE allow guests to have multiple GIDS')
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Set traffic class within sl_tclass_flowlabel when create iboe AH.
Without this the TOS value will be empty when running VLAN tagged
traffic, because the TOS value is taken from the traffic class in the
address handle attributes.

Fixes: 9106c410 ('IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Remove the warning print of "can't use of GFP_NOIO" to avoid prints in
each QP creation when devices aren't supporting IB_QP_CREATE_USE_GFP_NOIO.

This print become more annoying when the IPoIB interface is configured
to work in connected mode.

Fixes: 09b93088 ('IB: Add a QP creation flag to use GFP_NOIO allocations')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The maximum page size in the mkey context is 2GB.

Until today, we didn't enforce this requirement in the code,
and therefore, if we got a page size larger than 2GB, we
have passed zeros in the log_page_shift instead of the actual value
and the registration failed.

This patch limits the driver to use compound pages of 2GB for mkeys.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Add the 512 bytes limit of RDMA READ and the size of remote
address to the max SGE calculation.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Wait before continuing unload till all pending mkey async creation requests
are done.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

We put INT_MAX since this is the max value that can be held.
Though there is no hardware limitation, this is practically
a large enough number so we can use it.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Remove from the driver the limitation imposed by firmware check
to not allow change of atomic permissions for indirect UMRs.
In order to avoid failures on old firmware, we only ask for change
of atomic permissions if atomic operations are supported.

Fixes: 968e78dd ('IB/mlx5: Enhance UMR support to allow partial page table update')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Replace the pre-defined macro signifying inline umr instead
of the numerical constant.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When we create flow steering rule, we need to save the related QP in the
ib_flow struct. this QP is used in destroy flow.

Move the QP assignment from ib_uverbs_ex_create_flow into ib_create_flow,
this would allow both kernel and userspace consumers to use it.

This bug wasn't seen in the wild because there are no kernel consumers
currently in the kernel.

Fixes: 319a441d ("IB/core: Add receive flow steering support")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When creating a FWD rule using tc create also a HW counter
for this rule.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Currently the code supports only drop rules to possess counters,
add that ability also for fwd rules.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Currently when calling mlx5_add_flow_rule we accept
only one flow destination, this commit allows to pass
multiple destinations.

This change forces us to change the return structure to a more
flexible one. We introduce a flow handle (struct mlx5_flow_handle),
it holds internally the number for rules created and holds an array
where each cell points the to a flow rule.

From the consumers (of mlx5_add_flow_rule) point of view this
change is only cosmetic and requires only to change the type
of the returned value they store.

From the core point of view, we now need to use a loop when
allocating and deleting rules (e.g given to us a flow handler).
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

When adding a new rule, if we can match it with compare_match_value and
flow tag we might be able to insert the rule to the same fte.
In order to do that, there must be an overlap between the actions of the
fte and the new rule.

When updating the action of an existing fte, we must tell the firmware
we are doing so.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

The way we compare between two dests will need to be used in other
places in the future, so we factor out the comparison logic
between two dests into a separate function.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

An fte status becomes FS_FTE_STATUS_EXISTING only after it was
created in HW. We can use this in order to simplify the logic on
what firmware command to use. If the status isn't FS_FTE_STATUS_EXISTING
we need to create the fte, otherwise we need only to update it.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

When adding a new rule to an fte, we need to hold the fte lock
until we add that rule to the fte and increase the fte ref count.

Fixes: 0c56b975 ("net/mlx5_core: Introduce flow steering API")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Implement the vf set rate ndo by modifying the TSAR vport rate limit.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Add TSAR to the eswitch which will act as the vports rate limiter.
Create/Destroy TSAR on Enable/Dsiable SRIOV.
Attach/Detach vport to eswitch TSAR on Enable/Disable vport.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

TSAR (stands for Transmit Scheduling ARbiter) is a hardware component
that is responsible for selecting the next entity to serve on the
transmit path.
The arbitration defines the QoS policy between the agents connected to
the TSAR.
The TSAR is a consist two main features:
1) BW Allocation between agents:
The TSAR implements a defecit weighted round robin between the agents.
Each agent attached to the TSAR is assigned with a weight and it is
awarded transmission tokens according to this weight.
2) Rate limer per agent:
Each agent attached to the TSAR is (optionally) assigned with a rate
limit.
TSAR will not allow scheduling for an agent exceeding its defined rate
limit.

In this patch we implement the API of manipulating the TSAR.
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

For the mlx5 driver to support ConnectX-5 PCIe 4.0 VFs, we add the
device ID "0x101a" to mlx5_core_pci_table.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

According to PRM async_event_mask have to be 64 bits long.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

SRQ physical address structure field should be in big-endian format.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Update struct mlx5_ifc_xrqc_bits according to last specification
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Do not dispatch unknown mlx5 core events on mlx5_ib_event.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Pull x86 bugfix from Thomas Gleixner:
 "A single bugfix for the recent changes related to registering the boot
  cpu when this has not happened before prefill_possible_map().

  The main problem with this change got fixed already, but we missed the
  case where the local APIC is not yet mapped, when prefill_possible_map()
  is invoked, so the registration of the boot cpu which has the APIC bit
  set in CPUID will explode.

  I should have seen that issue earlier, but all I can do now is feeling
  embarassed"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smpboot: Init apic mapping before usage

Pull ubi/ubifs fixes from Richard Weinberger:
 "This contains fixes for issues in both UBI and UBIFS:

   - A regression wrt overlayfs, introduced in -rc2.
   - An UBI issue, found by Dan Carpenter's static checker"

* tag 'upstream-4.9-rc3' of git://git.infradead.org/linux-ubifs:
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()

Pull ARM SoC fixes from Olof Johansson:
 "We haven't seen a whole lot of fixes for the first two weeks since the
  merge window, but here is the batch that we have at the moment.

  Nothing sticks out as particularly bad or scary, it's mostly a handful
  of smaller fixes to several platforms. The Uniphier reset controller
  changes could probably have been delayed to 4.10, but they're not
  scary and just plumbing up driver changes that went in during the
  merge window.

  We're also adding another maintainer to Marvell Berlin platforms, to
  help out when Sebastian is too busy. Yay teamwork!"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Updated NAND DT properties for NS2 SVK
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  ARM: multi_v7_defconfig: Enable Intel e1000e driver
  MAINTAINERS: add myself as Marvell berlin SoC maintainer
  bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST
  ARM: dts: fix the SD card on the Snowball
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
  arm64: dts: marvell: fix clocksource for CP110 master SPI0
  ARM: mvebu: Select corediv clk for all mvebu v7 SoC

Pull char/misc driver fixes from Greg KH:
 "Here are a few small char/misc driver fixes for reported issues.

  The "biggest" are two binder fixes for reported issues that have been
  shipping in Android phones for a while now, the others are various
  fixes for reported problems.

  And there's a MAINTAINERS update for good measure.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  extcon: qcom-spmi-misc: Sync the extcon state on interrupt
  hv: do not lose pending heartbeat vmbus packets
  mei: txe: don't clean an unprocessed interrupt cause.
  ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct
  ANDROID: binder: Add strong ref checks

Merge tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes

Correct regulator handling on Rockchip arm64 boards to make
bind/unbind calls work correctly and remove a sdio-only
property from non-sdio mmc hosts, that accidentially was
added there.

* tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux into fixes

This pull request contains a single fix for Broadcom ARM64-based SoCs:

- Ray adds the required bus width and OOB sector size properties to the
  Northstar 2 SVK reference board in order for the NAND controller to work
  properly

* tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux:
  arm64: dts: Updated NAND DT properties for NS2 SVK
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

The i.MX fixes for 4.9:
 - A couple of patches from Fabio to fix the GPC power domain regression
   which is caused by PM Domain core change 0159ec67
   ("PM / Domains: Verify the PM domain is present when adding a
   provider"), and a related kernel crash seen with multi_v7_defconfig
   build.
 - Correct the PHY ID mask for AR8031 to match phy driver code.
 - Apply new added timer erratum A008585 for LS1043A and LS2080A SoC.
 - Correct vf610 global timer IRQ flag to avoid warning from gic driver
   after commit 992345a5 ("irqchip/gic: WARN if setting the
   interrupt type for a PPI fails").

* tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes

UniPhier ARM SoC fixes for v4.9

- Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig
- Rename wrongly-named mioctrl to sdctrl

* tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull driver core fixes from Greg KH:
 "Here are two small driver core / kernfs fixes for 4.9-rc3.

  One makes the Kconfig entry for DEBUG_TEST_DRIVER_REMOVE a bit more
  explicit that this is a crazy thing to enable for a distro kernel
  (thanks for trying Fedora!), the other resolves an issue with vim
  opening kernfs files (sysfs, configfs, etc.)

  Both have been in linux-next with no reported issues"

* tag 'driver-core-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE stronger
  kernfs: Add noop_fsync to supported kernfs_file_fops

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small staging and iio driver fixes for reported issues
  for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a
  sysfs file that was obviously wrong, and had never been tested, so it
  was moved to debugfs as that is where it belongs. The others are small
  bug fixes for reported issues with various staging or iio drivers.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  greybus: fix a leak on error in gb_module_create()
  greybus: es2: fix error return code in ap_probe()
  greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state()
  staging: android: ion: Fix error handling in ion_query_heaps()
  iio: accel: sca3000_core: avoid potentially uninitialized variable
  iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
  staging/lustre/llite: Move unstable_stats from sysfs to debugfs
  Staging: wilc1000: Fix kernel Oops on opening the device
  staging: android/ion: testing the wrong variable
  Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev
  Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev
  iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors
  iio: maxim_thermocouple: Align 16 bit big endian value of raw reads