1. 31 Jul, 2014 2 commits
  2. 30 Jul, 2014 12 commits
    • Dmitry Popov's avatar
      ip_tunnel(ipv4): fix tunnels with "local any remote $remote_ip" · 95cb5745
      Dmitry Popov authored
      Ipv4 tunnels created with "local any remote $ip" didn't work properly since
      7d442fab (ipv4: Cache dst in tunnels). 99% of packets sent via those tunnels
      had src addr = 0.0.0.0. That was because only dst_entry was cached, although
      fl4.saddr has to be cached too. Every time ip_tunnel_xmit used cached dst_entry
      (tunnel_rtable_get returned non-NULL), fl4.saddr was initialized with
      tnl_params->saddr (= 0 in our case), and wasn't changed until iptunnel_xmit().
      
      This patch adds saddr to ip_tunnel->dst_cache, fixing this issue.
      Reported-by: default avatarSergey Popov <pinkbyte@gentoo.org>
      Signed-off-by: default avatarDmitry Popov <ixaphire@qrator.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      95cb5745
    • Ivan Vecera's avatar
      bna: fill the magic in bnad_get_eeprom() instead of validating · dabf24d1
      Ivan Vecera authored
      A driver should fill magic field of ethtool_eeprom struct in .get_eeprom
      and validate it in .set_eeprom. The bna incorrectly validates it in both
      and this makes its .get_eeprom interface unusable.
      Signed-off-by: default avatarIvan Vecera <ivecera@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dabf24d1
    • Linus Torvalds's avatar
      Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux · 26bcd8b7
      Linus Torvalds authored
      Pull Exynos platform DT fix from Grant Likely:
       "Device tree Exynos bug fix for v3.16-rc7
      
        This bug fix has been brewing for a while.  I hate sending it to you
        so late, but I only got confirmation that it solves the problem this
        past weekend.  The diff looks big for a bug fix, but the majority of
        it is only executed in the Exynos quirk case.  Unfortunately it
        required splitting early_init_dt_scan() in two and adding quirk
        handling in the middle of it on ARM.
      
        Exynos has buggy firmware that puts bad data into the memory node.
        Commit 1c2f87c2 ("ARM: Get rid of meminfo") exposed the bug by
        dropping the artificial upper bound on the number of memory banks that
        can be added.  Exynos fails to boot after that commit.  This branch
        fixes it by splitting the early DT parse function and inserting a
        fixup hook.  Exynos uses the hook to correct the DT before parsing
        memory regions"
      
      * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
        arm: Add devicetree fixup machine function
        of: Add memory limiting function for flattened devicetrees
        of: Split early_init_dt_scan into two parts
      26bcd8b7
    • Linus Torvalds's avatar
      Merge tag 'stable/for-linus-3.16-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip · acba648d
      Linus Torvalds authored
      Pull Xen fix from David Vrabel:
       "Fix BUG when trying to expand the grant table.  This seems to occur
        often during boot with Ubuntu 14.04 PV guests"
      
      * tag 'stable/for-linus-3.16-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
        x86/xen: safely map and unmap grant frames when in atomic context
      acba648d
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · d8772157
      Linus Torvalds authored
      Pull KVM fix from Paolo Bonzini:
       "Fix a bug which allows KVM guests to bring down the entire system on
        some 64K enabled ARM64 hosts"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        kvm: arm64: vgic: fix hyp panic with 64k pages on juno platform
      d8772157
    • Linus Torvalds's avatar
      Revert "cdc_subset: deal with a device that needs reset for timeout" · 1d8fcba1
      Linus Torvalds authored
      This reverts commit 20fbe3ae.
      
      As reported by Stephen Rothwell, it causes compile failures in certain
      configurations:
      
        drivers/net/usb/cdc_subset.c:360:15: error: 'dummy_prereset' undeclared here (not in a function)
          .pre_reset = dummy_prereset,
                       ^
        drivers/net/usb/cdc_subset.c:361:16: error: 'dummy_postreset' undeclared here (not in a function)
          .post_reset = dummy_postreset,
                        ^
      Reported-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
      Acked-by: default avatarDavid Miller <davem@davemloft.net>
      Cc: Oliver Neukum <oneukum@suse.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1d8fcba1
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · b527caee
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Make fragmentation IDs less predictable, from Eric Dumazet.
      
       2) TSO tunneling can crash in bnx2x driver, fix from Dmitry Kravkov.
      
       3) Don't allow NULL msg->msg_name just because msg->msg_namelen is
          non-zero, from Andrey Ryabinin.
      
       4) ndm->ndm_type set using wrong macros, from Jun Zhao.
      
       5) cdc-ether devices can come up with entries in their address filter,
          so explicitly clear the filter after the device initializes.  From
          Oliver Neukum.
      
       6) Forgotten refcount bump in xfrm_lookup(), from Steffen Klassert.
      
       7) Short packets not padded properly, exposing random data, in bcmgenet
          driver.  Fix from Florian Fainelli.
      
       8) xgbe_probe() doesn't return an error code, but rather zero, when
          netif_set_real_num_tx_queues() fails.  Fix from Wei Yongjun.
      
       9) USB speed not probed properly in r8152 driver, from Hayes Wang.
      
      10) Transmit logic choosing the outgoing port in the sunvnet driver
          needs to consider a) is the port actually up and b) whether it is a
          switch port.  Fix from David L Stevens.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
        net: phy: re-apply PHY fixups during phy_register_device
        cdc-ether: clean packet filter upon probe
        cdc_subset: deal with a device that needs reset for timeout
        net: sendmsg: fix NULL pointer dereference
        isdn/bas_gigaset: fix a leak on failure path in gigaset_probe()
        ip: make IP identifiers less predictable
        neighbour : fix ndm_type type error issue
        sunvnet: only use connected ports when sending
        can: c_can_platform: Fix raminit, use devm_ioremap() instead of devm_ioremap_resource()
        bnx2x: fix crash during TSO tunneling
        r8152: fix the checking of the usb speed
        net: phy: Ensure the MDIO bus module is held
        net: phy: Set the driver when registering an MDIO bus device
        bnx2x: fix set_setting for some PHYs
        hyperv: Fix error return code in netvsc_init_buf()
        amd-xgbe: Fix error return code in xgbe_probe()
        ath9k: fix aggregation session lockup
        net: bcmgenet: correctly pad short packets
        net: sctp: inherit auth_capable on INIT collisions
        mac80211: fix crash on getting sta info with uninitialized rate control
        ...
      b527caee
    • David Vrabel's avatar
      x86/xen: safely map and unmap grant frames when in atomic context · b7dd0e35
      David Vrabel authored
      arch_gnttab_map_frames() and arch_gnttab_unmap_frames() are called in
      atomic context but were calling alloc_vm_area() which might sleep.
      
      Also, if a driver attempts to allocate a grant ref from an interrupt
      and the table needs expanding, then the CPU may already by in lazy MMU
      mode and apply_to_page_range() will BUG when it tries to re-enable
      lazy MMU mode.
      
      These two functions are only used in PV guests.
      
      Introduce arch_gnttab_init() to allocates the virtual address space in
      advance.
      
      Avoid the use of apply_to_page_range() by using saving and using the
      array of PTE addresses from the alloc_vm_area() call (which ensures
      that the required page tables are pre-allocated).
      Signed-off-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      b7dd0e35
    • Will Deacon's avatar
      kvm: arm64: vgic: fix hyp panic with 64k pages on juno platform · 63afbe7a
      Will Deacon authored
      If the physical address of GICV isn't page-aligned, then we end up
      creating a stage-2 mapping of the page containing it, which causes us to
      map neighbouring memory locations directly into the guest.
      
      As an example, consider a platform with GICV at physical 0x2c02f000
      running a 64k-page host kernel. If qemu maps this into the guest at
      0x80010000, then guest physical addresses 0x80010000 - 0x8001efff will
      map host physical region 0x2c020000 - 0x2c02efff. Accesses to these
      physical regions may cause UNPREDICTABLE behaviour, for example, on the
      Juno platform this will cause an SError exception to EL3, which brings
      down the entire physical CPU resulting in RCU stalls / HYP panics / host
      crashing / wasted weeks of debugging.
      
      SBSA recommends that systems alias the 4k GICV across the bounding 64k
      region, in which case GICV physical could be described as 0x2c020000 in
      the above scenario.
      
      This patch fixes the problem by failing the vgic probe if the physical
      base address or the size of GICV aren't page-aligned. Note that this
      generated a warning in dmesg about freeing enabled IRQs, so I had to
      move the IRQ enabling later in the probe.
      
      Cc: Christoffer Dall <christoffer.dall@linaro.org>
      Cc: Marc Zyngier <marc.zyngier@arm.com>
      Cc: Gleb Natapov <gleb@kernel.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Joel Schopp <joel.schopp@amd.com>
      Cc: Don Dutile <ddutile@redhat.com>
      Acked-by: default avatarPeter Maydell <peter.maydell@linaro.org>
      Acked-by: default avatarJoel Schopp <joel.schopp@amd.com>
      Acked-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      63afbe7a
    • Laura Abbott's avatar
      arm: Add devicetree fixup machine function · 5a12a597
      Laura Abbott authored
      Commit 1c2f87c2
      (ARM: 8025/1: Get rid of meminfo) dropped the upper bound on
      the number of memory banks that can be added as there was no
      technical need in the kernel. It turns out though, some bootloaders
      (specifically the arndale-octa exynos boards) may pass invalid memory
      information and rely on the kernel to not parse this data. This is a
      bug in the bootloader but we still need to work around this.
      Work around this by introducing a dt_fixup function. This function
      gets called before the flattened devicetree is scanned for memory
      and the like. In this fixup function for exynos, limit the maximum
      number of memory regions in the devicetree.
      Signed-off-by: default avatarLaura Abbott <lauraa@codeaurora.org>
      Tested-by: default avatarAndreas Färber <afaerber@suse.de>
      [glikely: Added a comment and fixed up function name]
      Signed-off-by: default avatarGrant Likely <grant.likely@linaro.org>
      5a12a597
    • Laura Abbott's avatar
      of: Add memory limiting function for flattened devicetrees · 704033ce
      Laura Abbott authored
      Buggy bootloaders may pass bogus memory entries in the devicetree.
      Add of_fdt_limit_memory to add an upper bound on the number of
      entries that can be present in the devicetree.
      Signed-off-by: default avatarLaura Abbott <lauraa@codeaurora.org>
      Tested-by: default avatarAndreas Färber <afaerber@suse.de>
      Signed-off-by: default avatarGrant Likely <grant.likely@linaro.org>
      704033ce
    • Laura Abbott's avatar
      of: Split early_init_dt_scan into two parts · 4972a74b
      Laura Abbott authored
      Currently, early_init_dt_scan validates the header, sets the
      boot params, and scans for chosen/memory all in one function.
      Split this up into two separate functions (validation/setting
      boot params in one, scanning in another) to allow for
      additional setup between boot params and scanning the memory.
      Signed-off-by: default avatarLaura Abbott <lauraa@codeaurora.org>
      Tested-by: default avatarAndreas Färber <afaerber@suse.de>
      [glikely: s/early_init_dt_scan_all/early_init_dt_scan_nodes/]
      Signed-off-by: default avatarGrant Likely <grant.likely@linaro.org>
      4972a74b
  3. 29 Jul, 2014 14 commits
    • Florian Fainelli's avatar
      net: phy: re-apply PHY fixups during phy_register_device · d92f5dec
      Florian Fainelli authored
      Commit 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()")
      moved the call to phy_scan_fixups() in phy_init_hw() after a software
      reset is performed.
      
      By the time phy_init_hw() is called in phy_device_register(), no driver
      has been bound to this PHY yet, so all the checks in phy_init_hw()
      against the PHY driver and the PHY driver's config_init function will
      return 0. We will therefore never call phy_scan_fixups() as we should.
      
      Fix this by calling phy_scan_fixups() and check for its return value to
      restore the intended functionality.
      
      This broke PHY drivers which do register an early PHY fixup callback to
      intercept the PHY probing and do things like changing the 32-bits unique
      PHY identifier when a pseudo-PHY address has been used, as well as
      board-specific PHY fixups that need to be applied during driver probe
      time.
      Reported-by: default avatarHauke Merthens <hauke-m@hauke-m.de>
      Reported-by: default avatarJonas Gorski <jogo@openwrt.org>
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d92f5dec
    • Oliver Neukum's avatar
      cdc-ether: clean packet filter upon probe · c472ab68
      Oliver Neukum authored
      There are devices that don't do reset all the way. So the packet filter should
      be set to a sane initial value. Failure to do so leads to intermittent failures
      of DHCP on some systems under some conditions.
      Signed-off-by: default avatarOliver Neukum <oneukum@suse.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c472ab68
    • Oliver Neukum's avatar
      cdc_subset: deal with a device that needs reset for timeout · 20fbe3ae
      Oliver Neukum authored
      This device needs to be reset to recover from a timeout.
      Unfortunately this can be handled only at the level of
      the subdrivers.
      Signed-off-by: default avatarOliver Neukum <oneukum@suse.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      20fbe3ae
    • Andrey Ryabinin's avatar
      net: sendmsg: fix NULL pointer dereference · 40eea803
      Andrey Ryabinin authored
      Sasha's report:
      	> While fuzzing with trinity inside a KVM tools guest running the latest -next
      	> kernel with the KASAN patchset, I've stumbled on the following spew:
      	>
      	> [ 4448.949424] ==================================================================
      	> [ 4448.951737] AddressSanitizer: user-memory-access on address 0
      	> [ 4448.952988] Read of size 2 by thread T19638:
      	> [ 4448.954510] CPU: 28 PID: 19638 Comm: trinity-c76 Not tainted 3.16.0-rc4-next-20140711-sasha-00046-g07d3099-dirty #813
      	> [ 4448.956823]  ffff88046d86ca40 0000000000000000 ffff880082f37e78 ffff880082f37a40
      	> [ 4448.958233]  ffffffffb6e47068 ffff880082f37a68 ffff880082f37a58 ffffffffb242708d
      	> [ 4448.959552]  0000000000000000 ffff880082f37a88 ffffffffb24255b1 0000000000000000
      	> [ 4448.961266] Call Trace:
      	> [ 4448.963158] dump_stack (lib/dump_stack.c:52)
      	> [ 4448.964244] kasan_report_user_access (mm/kasan/report.c:184)
      	> [ 4448.965507] __asan_load2 (mm/kasan/kasan.c:352)
      	> [ 4448.966482] ? netlink_sendmsg (net/netlink/af_netlink.c:2339)
      	> [ 4448.967541] netlink_sendmsg (net/netlink/af_netlink.c:2339)
      	> [ 4448.968537] ? get_parent_ip (kernel/sched/core.c:2555)
      	> [ 4448.970103] sock_sendmsg (net/socket.c:654)
      	> [ 4448.971584] ? might_fault (mm/memory.c:3741)
      	> [ 4448.972526] ? might_fault (./arch/x86/include/asm/current.h:14 mm/memory.c:3740)
      	> [ 4448.973596] ? verify_iovec (net/core/iovec.c:64)
      	> [ 4448.974522] ___sys_sendmsg (net/socket.c:2096)
      	> [ 4448.975797] ? put_lock_stats.isra.13 (./arch/x86/include/asm/preempt.h:98 kernel/locking/lockdep.c:254)
      	> [ 4448.977030] ? lock_release_holdtime (kernel/locking/lockdep.c:273)
      	> [ 4448.978197] ? lock_release_non_nested (kernel/locking/lockdep.c:3434 (discriminator 1))
      	> [ 4448.979346] ? check_chain_key (kernel/locking/lockdep.c:2188)
      	> [ 4448.980535] __sys_sendmmsg (net/socket.c:2181)
      	> [ 4448.981592] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2600)
      	> [ 4448.982773] ? trace_hardirqs_on (kernel/locking/lockdep.c:2607)
      	> [ 4448.984458] ? syscall_trace_enter (arch/x86/kernel/ptrace.c:1500 (discriminator 2))
      	> [ 4448.985621] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2600)
      	> [ 4448.986754] SyS_sendmmsg (net/socket.c:2201)
      	> [ 4448.987708] tracesys (arch/x86/kernel/entry_64.S:542)
      	> [ 4448.988929] ==================================================================
      
      This reports means that we've come to netlink_sendmsg() with msg->msg_name == NULL and msg->msg_namelen > 0.
      
      After this report there was no usual "Unable to handle kernel NULL pointer dereference"
      and this gave me a clue that address 0 is mapped and contains valid socket address structure in it.
      
      This bug was introduced in f3d33426
      (net: rework recvmsg handler msg_name and msg_namelen logic).
      Commit message states that:
      	"Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
      	 non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
      	 affect sendto as it would bail out earlier while trying to copy-in the
      	 address."
      But in fact this affects sendto when address 0 is mapped and contains
      socket address structure in it. In such case copy-in address will succeed,
      verify_iovec() function will successfully exit with msg->msg_namelen > 0
      and msg->msg_name == NULL.
      
      This patch fixes it by setting msg_namelen to 0 if msg_name == NULL.
      
      Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: <stable@vger.kernel.org>
      Reported-by: default avatarSasha Levin <sasha.levin@oracle.com>
      Signed-off-by: default avatarAndrey Ryabinin <a.ryabinin@samsung.com>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      40eea803
    • Alexey Khoroshilov's avatar
      isdn/bas_gigaset: fix a leak on failure path in gigaset_probe() · 86b7987d
      Alexey Khoroshilov authored
      There is a lack of usb_put_dev(udev) on failure path in gigaset_probe().
      
      Found by Linux Driver Verification project (linuxtesting.org).
      Signed-off-by: default avatarAlexey Khoroshilov <khoroshilov@ispras.ru>
      Acked-by: default avatarTilman Schmidt <tilman@imap.cc>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      86b7987d
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · c98158ed
      Linus Torvalds authored
      Pull ARM SoC fixes from Arnd Bergmann:
       "A nice small set of bug fixes for arm-soc:
      
         - two incorrect register addresses in DT files on shmobile and hisilicon
         - one revert for a regression on omap
         - one bug fix for a newly introduced pin controller binding
         - one regression fix for the memory controller on omap
         - one patch to avoid a harmless WARN_ON"
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: dts: Revert enabling of twl configuration for n900
        ARM: dts: fix L2 address in Hi3620
        ARM: OMAP2+: gpmc: fix gpmc_hwecc_bch_capable()
        pinctrl: dra: dt-bindings: Fix pull enable/disable
        ARM: shmobile: r8a7791: Fix SD2CKCR register address
        ARM: OMAP2+: l2c: squelch warning dump on power control setting
      c98158ed
    • David Howells's avatar
      AFS: Correctly assemble the client UUID · 0ef13515
      David Howells authored
      Correctly assemble the client UUID by OR'ing in the flags rather than
      assigning them over the other components.
      Reported-by: default avatarHimangi Saraogi <himangi774@gmail.com>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0ef13515
    • Randy Dunlap's avatar
      mm: fix page_alloc.c kernel-doc warnings · 1aab4d77
      Randy Dunlap authored
      Fix kernel-doc warnings and function name in mm/page_alloc.c:
      
        Warning(..//mm/page_alloc.c:6074): No description found for parameter 'pfn'
        Warning(..//mm/page_alloc.c:6074): No description found for parameter 'mask'
        Warning(..//mm/page_alloc.c:6074): Excess function parameter 'start_bitidx' description in 'get_pfnblock_flags_mask'
        Warning(..//mm/page_alloc.c:6102): No description found for parameter 'pfn'
        Warning(..//mm/page_alloc.c:6102): No description found for parameter 'mask'
        Warning(..//mm/page_alloc.c:6102): Excess function parameter 'start_bitidx' description in 'set_pfnblock_flags_mask'
      Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Acked-by: default avatarMel Gorman <mgorman@suse.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1aab4d77
    • Arnd Bergmann's avatar
      Merge tag 'omap-for-v3.16/n900-regression' of... · a1ae5b12
      Arnd Bergmann authored
      Merge tag 'omap-for-v3.16/n900-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      Merge "omap n900 regression fix for v3.16 rc series" from Tony Lindgren:
      
      Minimal regression fix for n900 display that got broken with
      enabling of twl4030 PM features. Turns out more work is needed
      before we can enable twl4030 PM on n900.
      
      I did not notice this earlier as I have my n900 in a rack
      and the display did not get enabled for device tree based booting
      until for v3.16.
      
      * tag 'omap-for-v3.16/n900-regression' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
        ARM: dts: Revert enabling of twl configuration for n900
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      a1ae5b12
    • Tony Lindgren's avatar
      ARM: dts: Revert enabling of twl configuration for n900 · d937678a
      Tony Lindgren authored
      Commit 9188883f (ARM: dts: Enable twl4030 off-idle configuration
      for selected omaps) allowed n900 to cut off core voltages during
      off-idle. This however caused a regression where twl regulator
      vaux1 was not getting enabled for the LCD panel as we are not
      requesting it for the panel.
      
      Turns out quite a few devices on n900 are using vaux1, and we need
      to either stop idling it, or add proper regulator_get calls for all
      users. But until we have a proper solution implemented and tested,
      let's just disable the twl off-idle configuration for now for n900.
      Reported-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
      Fixes: 9188883f (ARM: dts: Enable twl4030 off-idle configuration for selected omaps)
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      d937678a
    • Eric Dumazet's avatar
      ip: make IP identifiers less predictable · 04ca6973
      Eric Dumazet authored
      In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and
      Jedidiah describe ways exploiting linux IP identifier generation to
      infer whether two machines are exchanging packets.
      
      With commit 73f156a6 ("inetpeer: get rid of ip_id_count"), we
      changed IP id generation, but this does not really prevent this
      side-channel technique.
      
      This patch adds a random amount of perturbation so that IP identifiers
      for a given destination [1] are no longer monotonically increasing after
      an idle period.
      
      Note that prandom_u32_max(1) returns 0, so if generator is used at most
      once per jiffy, this patch inserts no hole in the ID suite and do not
      increase collision probability.
      
      This is jiffies based, so in the worst case (HZ=1000), the id can
      rollover after ~65 seconds of idle time, which should be fine.
      
      We also change the hash used in __ip_select_ident() to not only hash
      on daddr, but also saddr and protocol, so that ICMP probes can not be
      used to infer information for other protocols.
      
      For IPv6, adds saddr into the hash as well, but not nexthdr.
      
      If I ping the patched target, we can see ID are now hard to predict.
      
      21:57:11.008086 IP (...)
          A > target: ICMP echo request, seq 1, length 64
      21:57:11.010752 IP (... id 2081 ...)
          target > A: ICMP echo reply, seq 1, length 64
      
      21:57:12.013133 IP (...)
          A > target: ICMP echo request, seq 2, length 64
      21:57:12.015737 IP (... id 3039 ...)
          target > A: ICMP echo reply, seq 2, length 64
      
      21:57:13.016580 IP (...)
          A > target: ICMP echo request, seq 3, length 64
      21:57:13.019251 IP (... id 3437 ...)
          target > A: ICMP echo reply, seq 3, length 64
      
      [1] TCP sessions uses a per flow ID generator not changed by this patch.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarJeffrey Knockel <jeffk@cs.unm.edu>
      Reported-by: default avatarJedidiah R. Crandall <crandall@cs.unm.edu>
      Cc: Willy Tarreau <w@1wt.eu>
      Cc: Hannes Frederic Sowa <hannes@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04ca6973
    • Jun Zhao's avatar
      neighbour : fix ndm_type type error issue · 545469f7
      Jun Zhao authored
      ndm_type means L3 address type, in neighbour proxy and vxlan, it's RTN_UNICAST.
      NDA_DST is for netlink TLV type, hence it's not right value in this context.
      Signed-off-by: default avatarJun Zhao <mypopydev@gmail.com>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      545469f7
    • David L Stevens's avatar
      sunvnet: only use connected ports when sending · 8266f5fc
      David L Stevens authored
      The sunvnet driver doesn't check whether or not a port is connected when
      transmitting packets, which results in failures if a port fails to connect
      (e.g., due to a version mismatch). The original code also assumes
      unnecessarily that the first port is up and a switch, even though there is
      a flag for switch ports.
      
      This patch only matches a port if it is connected, and otherwise uses the
      switch_port flag to send the packet to a switch port that is up.
      Signed-off-by: default avatarDavid L Stevens <david.stevens@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8266f5fc
    • David S. Miller's avatar
      Merge tag 'linux-can-fixes-for-3.16-20140725' of git://gitorious.org/linux-can/linux-can · 8356f976
      David S. Miller authored
      Marc Kleine-Budde says:
      
      ====================
      pull-request: can 2014-07-25
      
      this is a pull request of one patch for the net tree, hoping to get into the
      3.16 release.
      
      The patch by George Cherian fixes a regression in the c_can platform driver.
      When using two interfaces the regression leads to a non function second
      interface.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8356f976
  4. 28 Jul, 2014 6 commits
  5. 27 Jul, 2014 5 commits
  6. 26 Jul, 2014 1 commit
    • Linus Torvalds's avatar
      Fix gcc-4.9.0 miscompilation of load_balance() in scheduler · 2062afb4
      Linus Torvalds authored
      Michel Dänzer and a couple of other people reported inexplicable random
      oopses in the scheduler, and the cause turns out to be gcc mis-compiling
      the load_balance() function when debugging is enabled.  The gcc bug
      apparently goes back to gcc-4.5, but slight optimization changes means
      that it now showed up as a problem in 4.9.0 and 4.9.1.
      
      The instruction scheduling problem causes gcc to schedule a spill
      operation to before the stack frame has been created, which in turn can
      corrupt the spilled value if an interrupt comes in.  There may be other
      effects of this bug too, but that's the code generation problem seen in
      Michel's case.
      
      This is fixed in current gcc HEAD, but the workaround as suggested by
      Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments
      when compiling the kernel, which disables the gcc code that causes the
      problem.  This can result in slightly worse debug information for
      variable accesses, but that is infinitely preferable to actual code
      generation problems.
      
      Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows
      non-debug builds to verify that the debug build would be identical: we
      can do
      
          export GCC_COMPARE_DEBUG=1
      
      to make gcc internally verify that the result of the build is
      independent of the "-g" flag (it will make the compiler build everything
      twice, toggling the debug flag, and compare the results).
      
      Without the "-fno-var-tracking-assignments" option, the build would fail
      (even with 4.8.3 that didn't show the actual stack frame bug) with a gcc
      compare failure.
      
      See also gcc bugzilla:
      
        https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801Reported-by: default avatarMichel Dänzer <michel@daenzer.net>
      Suggested-by: default avatarMarkus Trippelsdorf <markus@trippelsdorf.de>
      Cc: Jakub Jelinek <jakub@redhat.com>
      Cc: stable@kernel.org
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2062afb4