When receiving scan iteration complete notification, print a list of
the channels that have been scanned in this iteration.
This is useful for debugging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The BT_CONFIG command used to be very long, hence it was
allocated on the heap in the previous API. In the new API,
this command is much smaller, and can now safely be
allocated on the stack.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Since we don't need to configure the Ack / CTS kill mask
anymore in the new API, we don't need to iterate all the
interfaces upon rssi event on one of the interfaces.
Remove that code.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

There is no need to have separate definitions for the UMAC scan types,
since they are the same as the LMAC types.  Remove UMAC scan types and
use the generic ones instead.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

In order to imeplement the extended VI session feature for Miracast, the FW
requires to detect the VI queue. The detection of the VI queue is done when
it is assigned to a STA with ADD_STA command, so by this time the FW expects
the queue to be already configured (mapped to VI AC and aggregation enabled).
Previously, the queue configuration was done after STA modificaton which
broke the extended VI session feature and resulted in higher latencies.
Fix this by calling iwl_mvm_enable_agg_txq before station modification.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

If the device fails to start correctly prior to loading the
regular runtime firmware (after having run the INIT firmware),
treat that error correctly by actually checking the return
value of _iwl_trans_start_hw() and stopping the device again
before returning an error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

According to the nl80211 documentation, we can neither advertise
scheduled scan nor netdetect address randomisation. However, all
the products that currently require this don't have a need for
the full randomisation.

Therefore, advertise the feature anyway which results in host-
based randomisation, done whenever the system suspends. This is
sufficient for the platforms currently requiring this feature.

If we ever extend this in the future to do full randomisation in
the firmware, then certainly this will still be sufficient for
the current requirements, so it doesn't make a lot of sense to
split the feature bits.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

8000 devices have different thermal throttling values from previous
generations.
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Set a default NVM in case the userspace specifies a file
that doesn't match the hardware version. This allows not
to change the boot scripts when someone replaces the device
with a newer hardware step.
Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Add debugfs entry for showing the different Tx power restrictions that are
caused due to various reasons.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This was spot by Coccinelle.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The iwlmvm driver is now able to handle -14.ucode.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The transport modules all need to allocate memory and set up
certain values. Refactor that code into a new common function
to share it and to simplify the error handling.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The UMAC API supports multiple scan schedules, but now we use only a
single one.  Change the comment to make this clear and avoid
confusion.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This removes the use of the two deprecated calls to the
macro PTR_RET in iwl_mvm_get_regdomain and replaces them
both to PTR_ERR_OR_ZERO.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
[Commit message editing]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit b112889c ("iwlwifi: mvm: add Aux ROC request/response flow")
added aux ROC flow in addition to the existing ROC flow. While doing
it, it moved the ROC reference release to a common work item, which
is being called for both the ROC and aux ROC flows.

This resulted in invalid reference accounting, as no reference was
taken in case of aux ROC, while a reference was released on completion.

Fix it by adding a reference for the aux ROC as well, and release
only the relevant references on completion (according to the set bits).

While at it, convert cancel_work_sync() to flush_work(), in order
to make sure the references are being cleaned properly.

Fixes: b112889c ("iwlwifi: mvm: add Aux ROC request/response flow")
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

We should not call the iwl_pcie_set_pwr() functions in the
suspend/resume flows for family 8000, because the register used is
locked in devices from this family.  Doing this causes an NMI
protection error (RT_NMI_INTERRUPT_PREG_PROTECTION).

To fix this, skip those calls if the device family is
IWL_DEVICE_FAMILY_8000.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Conflicts:
	drivers/net/wireless/iwlwifi/Kconfig

qos_seq points (to a struct) inside the command response data.

Make sure to free the response only after qos_seq is not
needed anymore.
Reported-by: Heng Luo <heng.luo@intel.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

If the device is reset during suspend with net-detect enabled, we
leave the net-detect information dangling and this causes the next
suspend to fail with a warning:

[21795.351010] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/d3.c:989 __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]()
[21795.353253] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [...]
[21795.366168] CPU: 1 PID: 3645 Comm: bash Tainted: G           O 3.10.29-dev #1
[21795.368785] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012
[21795.371441]  f8ec6748 f8ec6748 e51f3ce8 c168aa62 e51f3d10 c103a824 c1871238 f8ec6748
[21795.374228]  000003dd f8eb982e f8eb982e 00000000 c3408ed4 c41edbbc e51f3d20 c103a862
[21795.377006]  00000009 00000000 e51f3da8 f8eb982e c41ee3dc 00000004 e7970000 e51f3d74
[21795.379792] Call Trace:
[21795.382461]  [<c168aa62>] dump_stack+0x16/0x18
[21795.385133]  [<c103a824>] warn_slowpath_common+0x64/0x80
[21795.387803]  [<f8eb982e>] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]
[21795.390485]  [<f8eb982e>] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]
[21795.393124]  [<c103a862>] warn_slowpath_null+0x22/0x30
[21795.395787]  [<f8eb982e>] __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]
[21795.398464]  [<f8eb9d7c>] iwl_mvm_suspend+0xec/0x140 [iwlmvm]
[21795.401127]  [<c104be11>] ? del_timer_sync+0xa1/0xc0
[21795.403800]  [<f8d4107e>] __ieee80211_suspend+0x1de/0xff0 [mac80211]
[21795.406459]  [<c168e43d>] ? mutex_lock_nested+0x25d/0x350
[21795.409084]  [<c1586b64>] ? rtnl_lock+0x14/0x20
[21795.411685]  [<f8cf0076>] ieee80211_suspend+0x16/0x20 [mac80211]
[21795.414318]  [<f8c4e014>] wiphy_suspend+0x74/0x710 [cfg80211]
[21795.416916]  [<c141e612>] __device_suspend+0x1e2/0x220
[21795.419521]  [<f8c4dfa0>] ? addresses_show+0xa0/0xa0 [cfg80211]
[21795.422097]  [<c141f997>] dpm_suspend+0x67/0x210
[21795.424661]  [<c141fd6f>] dpm_suspend_start+0x4f/0x60
[21795.427219]  [<c108d8e0>] suspend_devices_and_enter+0x60/0x480
[21795.429768]  [<c168646a>] ? printk+0x4d/0x4f
[21795.432295]  [<c108de76>] pm_suspend+0x176/0x210
[21795.434830]  [<c108ca5d>] state_store+0x5d/0xb0
[21795.437410]  [<c108ca00>] ? wakeup_count_show+0x50/0x50
[21795.439961]  [<c13208db>] kobj_attr_store+0x1b/0x30
[21795.442514]  [<c11e3a4b>] sysfs_write_file+0xab/0x100
[21795.445088]  [<c11e39a0>] ? sysfs_poll+0xa0/0xa0
[21795.447659]  [<c1179655>] vfs_write+0xa5/0x1c0
[21795.450212]  [<c1179af7>] SyS_write+0x57/0xa0
[21795.452699]  [<c1699ec1>] sysenter_do_call+0x12/0x32
[21795.455146] ---[ end trace faf5321baba2bfdb ]---

To fix this, call the iwl_mvm_free_nd() function in case of any error
during resume.  Additionally, rename the "out_unlock" label to err to
make it clearer that it's only called in error conditions.

Cc: stable@vger.kernel.org [3.19+]
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The __iwl_mvm_resume() function always returns 1, which causes
mac80211 to do a reconfig with IEEE80211_RECONFIG_TYPE_RESTART.  This
type of reconfig calls iwl_mvm_restart_complete(), where we unref the
IWL_MVM_REF_UCODE_DOWN, so we should always take the reference in this
case.

This prevents this kind of warning from happening:

[40026.103025] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/mac80211.c:236 iwl_mvm_unref+0xc9/0xd0 [iwlmvm]()
[40026.105145] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) ctr ccm arc4 autofs4 snd_hda_codec_hdmi snd_hda_codec_idt joydev coretemp kvm_intel kvm aesni_intel ablk_helper cryptd lrw aes_i586 snd_hda_intel xts snd_hda_codec gf128mul snd_hwdep snd_pcm snd_seq_midi dell_wmi snd_rawmidi sparse_keymap snd_seq_midi_event snd_seq uvcvideo dell_laptop videobuf2_core dcdbas microcode videodev psmouse snd_timer videobuf2_vmalloc videobuf2_memops serio_raw snd_seq_device btusb i915 snd bluetooth lpc_ich drm_kms_helper soundcore snd_page_alloc drm i2c_algo_bit wmi parport_pc ppdev video binfmt_misc rpcsec_gss_krb5 nfsd mac_hid nfs_acl nfsv4 auth_rpcgss nfs fscache lockd sunrpc msdos lp parport sdhci_pci sdhci ahci libahci e1000e mmc_core ptp pps_core [last unloaded: compat]
[40026.117640] CPU: 2 PID: 3827 Comm: bash Tainted: G        W  O 3.10.29-dev #1
[40026.120216] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012
[40026.122815]  f8effd18 f8effd18 e740fd18 c168aa62 e740fd40 c103a824 c1871238 f8effd18
[40026.125527]  000000ec f8ec79c9 f8ec79c9 d5d29ba4 d5d2a20c 00000000 e740fd50 c103a862
[40026.128209]  00000009 00000000 e740fd7c f8ec79c9 f1c591c4 00000400 00000000 f8efb490
[40026.130886] Call Trace:
[40026.133506]  [<c168aa62>] dump_stack+0x16/0x18
[40026.136115]  [<c103a824>] warn_slowpath_common+0x64/0x80
[40026.138727]  [<f8ec79c9>] ? iwl_mvm_unref+0xc9/0xd0 [iwlmvm]
[40026.141319]  [<f8ec79c9>] ? iwl_mvm_unref+0xc9/0xd0 [iwlmvm]
[40026.143881]  [<c103a862>] warn_slowpath_null+0x22/0x30
[40026.146453]  [<f8ec79c9>] iwl_mvm_unref+0xc9/0xd0 [iwlmvm]
[40026.149030]  [<f8ec7a4d>] iwl_mvm_mac_reconfig_complete+0x7d/0x210 [iwlmvm]
[40026.151645]  [<f8b74b20>] ? ftrace_raw_event_drv_reconfig_complete+0xc0/0xe0 [mac80211]
[40026.154291]  [<f8b6769e>] ieee80211_reconfig+0x28e/0x2620 [mac80211]
[40026.156920]  [<c10ef0ea>] ? ring_buffer_unlock_commit+0xba/0x100
[40026.159585]  [<f8b4a04d>] ieee80211_resume+0x6d/0x80 [mac80211]
[40026.162206]  [<f8a79722>] wiphy_resume+0x72/0x260 [cfg80211]
[40026.164799]  [<c141e2e7>] ? device_resume+0x57/0x150
[40026.167425]  [<f8a796b0>] ? wiphy_suspend+0x710/0x710 [cfg80211]
[40026.170075]  [<c141e26e>] dpm_run_callback+0x2e/0x50
[40026.172695]  [<c141e321>] device_resume+0x91/0x150
[40026.175334]  [<c141f636>] dpm_resume+0xf6/0x200
[40026.177922]  [<c141f920>] dpm_resume_end+0x10/0x20
[40026.180489]  [<c108d9f7>] suspend_devices_and_enter+0x177/0x480
[40026.183037]  [<c168646a>] ? printk+0x4d/0x4f
[40026.185559]  [<c108de76>] pm_suspend+0x176/0x210
[40026.188065]  [<c108ca5d>] state_store+0x5d/0xb0
[40026.190581]  [<c108ca00>] ? wakeup_count_show+0x50/0x50
[40026.193052]  [<c13208db>] kobj_attr_store+0x1b/0x30
[40026.195608]  [<c11e3a4b>] sysfs_write_file+0xab/0x100
[40026.198055]  [<c11e39a0>] ? sysfs_poll+0xa0/0xa0
[40026.200469]  [<c1179655>] vfs_write+0xa5/0x1c0
[40026.202893]  [<c1179af7>] SyS_write+0x57/0xa0
[40026.205245]  [<c1699ec1>] sysenter_do_call+0x12/0x32
[40026.207619] ---[ end trace db1d5a72a0381b0a ]---
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: EliadX Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

There are buses that can't handle ASYNC command without
copying them. Duplicate the host command instead.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Take the MAC address from the OTP even if one is present in
the NVM, if that MAC address happens to be a reserved one.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

fw_status is the only pointer pointing to a block of memory
allocated above and should be freed after use.
Note: this come from Klockwork static analyzer.

Cc: stable@vger.kernel.org [3.19+]
Fixes: 2021a89d ("iwlwifi: mvm: treat netdetect wake up separately")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

A few triggers have status = MLME_SUCCESS and they are still
interesting. E.g. if we want to collect data upon deauth,
the status will be MLME_SUCCESS. Fix that.

Fixes: d42f5350 ("iwlwifi: mvm: add trigger for firmware dump upon MLME failures")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Disabling the clocks is a standard procedure while stopping the
device. On family 8000 however, disabling the bus master DMA clock
increases the NIC's power consumption.

To fix this, skip this call if the device family is
IWL_DEVICE_FAMILY_8000.
Signed-off-by: Avri Altman <avri.altman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

3165 really needs to load iwlwifi-7265D-13.ucode. This
device is supported starting from -13.ucode, update the
MIN and OK defines accordingly. While at it, add 3165 to
the device list in the Kconfig file.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

There are devices that forbid MIMO by the mean of the NVM.
Detect thoses devices and forbid MIMO otherwise the firmware
would crash. STBC is still allowed on these devices.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Fix a copy paste bug that didn't copy wildcard SSIDs to
scan requests. This bug causes scan with only wildcard
SSID to be passive, and scans with more than one SSID to
send only the direct probes.

Fixes: 2a28ac14c518 ("iwlwifi: mvm: add common scan params to thw iwl_mvm_scan_params struct")
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Some more tidbits left over from the legacy scan removal.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The thermal throttling parameters were constant and hardcoded, not allowing
changes for different NIC families.
Change this so that the values are part of the NIC family configuration and
are not constant (so they can be changed dynamically in the future).
Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

When a firmware restart is done, don't try to reprogram the keys to new
slots but rather just keep the old key index, while skipping keys that
weren't programmed before.

Not only does this restore the state more faithfully, but it will also
allow using the HW key index for internal purposes as an array index.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The generic scan command functions are now irrelevant, since both
sched and regular scans are in the same code.  So rename this
functions to dwell and isolate all the dwell-related setting to them.
Keeping the dwell code separate makes it easier to compare the LMAC
and UMAC versions.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Having an LMAC counterpart for the existing UMAC flags function makes
things more consistent and easy to compare and spot the differences.
The flags are the same, but are in different bits, so unfortunately we
can't use a single function for both APIs.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Clean the code a little by moving all the flags into the right
function.  Additionally, rename the function, since "common" is now
irrelevant.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

When we use an external buffer, it is allocated from the
t DRAM and can be as big as 64MB. This buffer is huge and
might not be needed for the specific issue being chased.
Especially if lots of dumps are going to be created.
Allow to limit the size of the buffer in the configuration.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

qos_seq points (to a struct) inside the command response data.

Make sure to free the response only after qos_seq is not
needed anymore.

type=bugfix
bug=not-tracked
fixes=I78c07110b59dcd389207bd2b168b0a2760839fe0

Change-Id: I619ce2c17e064dc98c7be9abc1e23175fdc8fb9a
Reported-by: Heng Luo <heng.luo@intel.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-on: https://gerrit.rds.intel.com/r/55381Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: IWL Jenkins
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

With just a few differences left in the UMAC scan functions now, we
can merge them into one, taking care of the small difference according
to the total number of iterations required.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

In theory, LMAC scans can handle a 32-bit delay, but since waiting for
over 18 hours to start the scan is a bit silly and to keep it aligned
with UMAC scans (which only support 16-bit delays), trim it down to
16-bits.

This makes the LMAC vs. UMAC and the UMAC reg scan vs. UMAC sched scan
code more similar.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>