Pull clk updates from Stephen Boyd:
 "This round is dominated by NXP's i.MX clk drivers. We gained support
  for two or three i.MX SoCs in here and that mostly means a lot of
  driver code and data.

  Beyond that platform, there are some new Mediatek, Amlogic, and
  Qualcomm clk drivers added in here, and then we get to the long tail
  of driver updates and non-critical fixes all around, including code
  for vendors such as Renesas, Rockchip, Nvidia, and Allwinner. Overall,
  the driver updates look normal.

  Apart from the usual driver updates we have an update to make
  registering OF based clk providers a little simpler when they're
  devices created as a child of a device backed by a node in DT. Drivers
  don't have to jump through hoops to unregister the provider upon
  driver removal anymore because the API does the right thing and uses
  the parent device DT node.

  Summary:

  Core:
   - Make devm_of_clk_add_hw_provider() use parent dt node if necessary
   - Various SPDX taggings
   - Mark clk_ops const when possible

  New Drivers:
   - NXP i.MX7ULP SoC clock support
   - NXP i.MX8QXP SoC clock support
   - NXP i.MX8MQ SoC clock support
   - NXP QorIQ T1023 SoC support
   - Qualcomm SDM845 audio subsystem clks
   - Qualcomm SDM845 GPU clck controllers
   - Qualcomm QCS404 RPM clk support
   - Mediatek MT7629 SoC clk controllers
   - Allwinner F1c100s SoC clocks
   - Allwinner H6 display engine clocks
   - Amlogic GX video clocks
   - Support for Amlogic meson8b CPU frequency scaling
   - Amlogic Meson8b CPU post-divider clocks

  Updates:
   - Proper suspend/resume on VersaClock5
   - Shrink code some with DEFINE_SHOW_ATTRIBUTE()
   - Register fixes for Rockchip rk3188 and rk3328
   - One new critical clock for Rockchip rk3188 and a fixed clock id
     (double used number)
   - New clock id for Rockchip rk3328
   - Amlogic Meson8/Meson8b video clock support
   - Amlogic got a clk-input helper and used it for the axg-audio clock
     driver
   - Sigma Delta modulation for the Allwinner A33 audio clocks
   - Support for CPEX (timer) clocks on various Renesas R-Car Gen3 and
     RZ/G2 SoCs
   - Support for SDHI HS400 clocks on early revisions of Renesas R-Car
     H3 and M3-W
   - Support for SDHI and USB clocks on Renesas RZ/A2
   - Support for RPC (SPI Multi I/O Bus Controller) clocks on Renesas
     R-Car V3M
   - Qualcomm MSM8998 GCC driver improvements (resets, drop unused clks,
     etc)"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits)
  clk: imx: imx7ulp: add arm hsrun mode clocks support
  dt-bindings: clock: imx7ulp: add HSRUN mode related clocks
  clk: Use of_node_name_eq for node name comparisons
  clk: vc5: Add suspend/resume support
  clk: qcom: Drop unused 8998 clock
  clk: qcom: Leave mmss noc on for 8998
  clk: tegra: Return the exact clock rate from clk_round_rate
  clk: tegra30: Use Tegra CPU powergate helper function
  soc/tegra: pmc: Drop SMP dependency from CPU APIs
  clk: tegra: Fix maximum audio sync clock for Tegra124/210
  clk: tegra: get rid of duplicate defines
  clk: imx: add imx8qxp lpcg driver
  clk: imx: add lpcg clock support
  clk: imx: add imx8qxp clk driver
  clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant
  clk: imx: add scu clock common part
  clk: imx: add configuration option for mmio clks
  dt-bindings: clock: add imx8qxp lpcg clock binding
  dt-bindings: clock: imx8qxp: add SCU clock IDs
  clk: qcom: Add missing msm8998 resets
  ...

Merge tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "There are several few-liners, where most of them are fixes and
  improvments. One thing standing out is ground preparation for
  inititializing trigger parameters via Device Tree.

  We introduce LED_INIT_DEFAULT_TRIGGER flag for that purpose and set it
  when default trigger is matched. It indicates that trigger should
  parse DT properties to retrieve the initialization data when set as
  default one"

* tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought after class
  led: triggers: Add LED_INIT_DEFAULT_TRIGGER flag
  led: triggers: Break the for loop after default trigger is found
  leds: pwm: Use OF variant of LED registering function
  leds: pwm: Simplify with resource-managed devm_led_classdev_register()
  leds: gpio: Drop unneeded manual of_node assignment
  leds: 88pm860x: Use of_node_name_eq for node name comparisons
  leds: powernv: add of_node_put()

Pull regmap updates from Mark Brown:
 "This has been a busy release for the regmap-irq code, there's several
  new features been added, including an API cleanup for how we specify
  types that affected one existing driver (gpio-max77620):

   - Support for hardware that flags rising and falling edges on
     separate status bits from Bartosz Golaszewski.

   - Support for explicitly clearing interrupts before unmasking from
     Bartosz Golaszewski.

   - Support for level triggered IRQs from Matti Vaittinen"

* tag 'regmap-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: irq: add an option to clear status registers on unmask
  regmap: regmap-irq/gpio-max77620: add level-irq support
  regmap: regmap-irq: Remove default irq type setting from core
  regmap: debugfs: convert to DEFINE_SHOW_ATTRIBUTE
  regmap: rbtree: convert to DEFINE_SHOW_ATTRIBUTE
  regmap: irq: handle HW using separate rising/falling edge interrupts
  regmap: add a new macro:REGMAP_IRQ_REG_LINE(_id, _reg_bits)

Pull spi updates from Mark Brown:
 "The main thing this release has been a lot of work on the integration
  with SPI NOR flashes, there's been some specific support for a while
  for controller features designed to make them perform better but it's
  not worked out as well as hoped so the interface has been redesigned
  in a way that will hopefully do better - it's already been adopted by
  a number of additional controllers so things are looking good.

  Otherwise most of the work has been driver specific:

   - Support for better integration with NOR flashes from Boris
     Brezillon and Yogesh Narayan Gaur plus usage of it in several
     drivers.

   - A big cleanup of the Rockchip driver from Emil Renner Berthing.

   - Lots of performance improvements for bcm2835 from Lukas Wunner.

   - Slave mode support for pxa2xx from Lubomir Rintel.

   - Support for Macronix MXIC, Mediatek MT7629 and MT8183, NPCM PSPI,
     and Renesas r8a77470"

* tag 'spi-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits)
  spi: sh-msiof: Reduce the number of times write to and perform the transmission from FIFO
  spi: sh-msiof: Add r8a774c0 support
  doc: lpspi: Document DT bindings for LPSPI slave mode
  spi: lpspi: Let watermark change with send data length
  spi: lpspi: Add slave mode support
  spi: lpspi: Replace all "master" with "controller"
  spi: imx: drop useless member speed_hz from driver data struct
  spi: imx: rename config callback and add useful parameters
  spi: imx: style fixes
  spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.
  spi: imx: add a device specific prepare_message callback
  mtd: atmel-quadspi: disallow building on ebsa110
  spi: Update NPCM PSPI controller documentation
  spi: npcm: Modify pspi send function
  spi: Use of_node_name_eq for node name comparisons
  spi: dw-mmio: add ACPI support
  spi: bcm2835: Synchronize with callback on DMA termination
  spi: bcm2835: Speed up FIFO access if fill level is known
  spi: bcm2835: Polish transfer of DMA prologue
  spi: spi-mem: add support for octal mode I/O data transfer
  ...

Pull regulator updates from Mark Brown:
 "This has been a very busy release for the core, some fixes, one large
  new feature and a big bit of refactoring to update the GPIO API:

   - Support for coupled regulators from Dmitry Osipenko based on a
     prior attempt by Maciej Purski, allowing us to handle situations
     where the voltages on two regulators can't be too far apart from
     each other.

   - Conversion of the GPIO support in both drivers and the core to use
     GPIO descriptors rather than numbers, part of the overall project
     to remove GPIO numbers.

   - Support for standby mode suspend states from Andrei Stefanescu.

   - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and
     Microchip MPC16502"

* tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (90 commits)
  regulator: tps65910: fix a missing check of return value
  regulator: mcp16502: Select REGMAP_I2C to fix build error
  regulator: convert to DEFINE_SHOW_ATTRIBUTE
  regulator: mcp16502: Fix missing n_voltages setting
  regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around mcp16502_suspend/resume_noirq
  regulator: mcp16502: code cleanup
  regulator: act8945a-regulator: make symbol act8945a_pm static
  drivers/regulator: fix a missing check of return value
  regulator: act8945a-regulator: fix 'defined but not used' compiler warning
  regulator: axp20x: fix set_ramp_delay for AXP209/dcdc2
  regulator: mcp16502: add support for suspend
  mfd: axp20x: use explicit bit defines
  mfd: axp20x: Clean up included headers
  regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
  dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3
  regulator: axp20x: add software based soft_start for AXP209 LDO3
  dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
  regulator: axp20x: add support for set_ramp_delay for AXP209
  mfd: axp20x: name voltage ramping define properly
  regulator: mcp16502: add regulator driver for MCP16502
  ...

Merge tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Not a lot going on this cycle.

  There's some more cleanup going on and new driver support that was not
  quite ready in time for v4.21-rc1, but here are a few fixes and
  improvements that are good to go.

  The Kona PWM driver can now be built on the Cygnus architecture and
  the i.MX driver gained support for hardware readback. Some small fixes
  are provided for the clks711x and lpc18xx-sct drivers.

  Finally, to round things off some drivers are switched to SPDX license
  identifiers"

* tag 'pwm/for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  dt-bindings: pwm: rcar: Add r8a774c0 support
  pwm: imx: Add ipg clock operation
  pwm: clps711x: Switch to SPDX identifier
  pwm: clps711x: Fix period calculation
  pwm: bcm2835: Switch to SPDX identifier
  pwm: Enable Kona PWM to be built for the Cygnus architecture
  pwm: Drop legacy wrapper for changing polarity
  pwm: imx: Implement get_state() function for hardware readout
  pwm: imx: Use bitops and bitfield macros to define register values
  pwm: imx: Sort include files
  pwm: lpc18xx-sct: Don't reconfigure PWM in .request and .free

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the 20181213 upstream
  revision, make it possible to build the ACPI subsystem without PCI
  support, and a new OEM _OSI string, add a new device support to the
  ACPI driver for AMD SoCs and fix PM handling in the ACPI driver for
  Intel SoCs, fix the SPCR table handling and do some assorted fixes and
  cleanups.

  Specifics:

   - Update the ACPICA code in the kernel to the 20181213 upstream
     revision including:
      * New Windows _OSI strings (Bob Moore, Jung-uk Kim).
      * Buffers-to-string conversions update (Bob Moore).
      * Removal of support for expressions in package elements (Bob
        Moore).
      * New option to display method/object evaluation in debug output
        (Bob Moore).
      * Compiler improvements (Bob Moore, Erik Schmauss).
      * Minor debugger fix (Erik Schmauss).
      * Disassembler improvement (Erik Schmauss).
      * Assorted cleanups (Bob Moore, Colin Ian King, Erik Schmauss).

   - Add support for a new OEM _OSI string to indicate special handling
     of secondary graphics adapters on some systems (Alex Hung).

   - Make it possible to build the ACPI subystem without PCI support
     (Sinan Kaya).

   - Make the SPCR table handling regard baud rate 0 in accordance with
     the specification of it and make the DSDT override code support
     DSDT code names generated by recent ACPICA (Andy Shevchenko, Wang
     Dongsheng, Nathan Chancellor).

   - Add clock frequency for Hisilicon Hip08 SPI controller to the ACPI
     driver for AMD SoCs (APD) (Jay Fang).

   - Fix the PM handling during device init in the ACPI driver for Intel
     SoCs (LPSS) (Hans de Goede).

   - Avoid double panic()s by clearing the APEI GHES block_status before
     panic() (Lenny Szubowicz).

   - Clean up a function invocation in the ACPI core and get rid of some
     code duplication by using the DEFINE_SHOW_ATTRIBUTE macro in the
     APEI support code (Alexey Dobriyan, Yangtao Li)"

* tag 'acpi-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
  ACPI / tables: Add an ifdef around amlcode and dsdt_amlcode
  ACPI/APEI: Clear GHES block_status before panic()
  ACPI: Make PCI slot detection driver depend on PCI
  ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set
  arm64: select ACPI PCI code only when both features are enabled
  PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset
  ACPI: Allow CONFIG_PCI to be unset for reboot
  ACPI: Move PCI reset to a separate function
  ACPI / OSI: Add OEM _OSI string to enable dGPU direct output
  ACPI / tables: add DSDT AmlCode new declaration name support
  ACPICA: Update version to 20181213
  ACPICA: change coding style to match ACPICA, no functional change
  ACPICA: Debug output: Add option to display method/object evaluation
  ACPICA: disassembler: disassemble OEMx tables as AML
  ACPICA: Add "Windows 2018.2" string in the _OSI support
  ACPICA: Expressions in package elements are not supported
  ACPICA: Update buffer-to-string conversions
  ACPICA: add comments, no functional change
  ACPICA: Remove defines that use deprecated flag
  ...

Pull power management updates from Rafael Wysocki:
 "These add sysadmin documentation for cpuidle, extend the cpuidle
  subsystem somewhat, improve the handling of performance states in the
  generic power domains (genpd) and operating performance points (OPP)
  frameworks, add a new cpufreq driver for Qualcomm SoCs, update some
  other cpufreq drivers, switch over the runtime PM framework to using
  high-res timers for device autosuspend, fix a problem with
  suspend-to-idle on ACPI-based platforms, add system-wide suspend and
  resume handling to the devfreq framework, do some janitorial cleanups
  all over and update some utilities.

  Specifics:

   - Add sysadmin documentation for cpuidle (Rafael Wysocki).

   - Make it possible to specify a cpuidle governor from kernel command
     line, add new cpuidle state sysfs attributes for governor
     evaluation, and improve the "polling" idle state handling (Rafael
     Wysocki).

   - Fix the handling of the "required-opps" DT property in the
     operating performance points (OPP) framework, improve the
     integration of it with the generic power domains (genpd) framework,
     improve the handling of performance states in them and clean up the
     idle states vs performance states separation in genpd (Viresh
     Kumar, Ulf Hansson).

   - Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a
     hardware engine to control CPU frequency transitions along with DT
     bindings for it (Taniya Das).

   - Fix an intel_pstate driver issue related to CPU offline and update
     the documentation of it (Srinivas Pandruvada).

   - Clean up the imx6q cpufreq driver (Anson Huang).

   - Add SPDX license IDs to cpufreq schedutil governor files (Daniel
     Lezcano).

   - Switch over the runtime PM framework to using high-res timers for
     device autosuspend to allow the control of it to be more precise
     (Vincent Guittot).

   - Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
     don't prevent the system from reaching the target low-power state
     and simplify the suspend-to-idle handling on ACPI platforms without
     full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).

   - Add system-wide suspend and resume support to the devfreq framework
     (Lukasz Luba).

   - Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
     add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
     Thomas Meyer).

   - Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
     macro in some places, fix some DT node refcount leaks, and do some
     other janitorial cleanups (Yangtao Li).

   - Update the cpupower, intel_pstate_tracer and turbosat utilities
     (Abhishek Goel, Doug Smythies, Len Brown)"

* tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
  PM-runtime: Switch autosuspend over to using hrtimers
  cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
  dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
  ACPI: PM: Loop in full LPS0 mode only
  ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle
  tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
  tools/power turbostat: consolidate duplicate model numbers
  tools/power turbostat: fix goldmont C-state limit decoding
  PM / Domains: Propagate performance state updates
  PM / Domains: Factorize dev_pm_genpd_set_performance_state()
  PM / Domains: Save OPP table pointer in genpd
  OPP: Don't return 0 on error from of_get_required_opp_performance_state()
  OPP: Add dev_pm_opp_xlate_performance_state() helper
  OPP: Improve _find_table_of_opp_np()
  PM / Domains: Make genpd performance states orthogonal to the idlestates
  PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
  cpuidle: Add 'above' and 'below' idle state metrics
  PM / AVS: SmartReflex: Switch to SPDX Licence ID
  PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
  ...

Pull EDAC updates from Borislav Petkov:

 - Support for ZynqMP DDR controller support to synopsys_edac along with
   a driver cleanup and generalization for the addition of support for
   the new IP. (Manish Narani)

 - Removal of the /sys/bus/edac devices hierarchy. This enabled us to
   get rid of the silly memory controllers maximum number notion. (Tony
   Luck and Borislav Petkov)

 - skx_edac improvements and fixes. (Qiuxu Zhuo and Tony Luck)

 - The usual garden variety of small cleanups and fixes.

* tag 'edac_for_4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (25 commits)
  EDAC, fsl_ddr: Add LS1021A to the list of supported hardware
  EDAC, i5000: Remove set but not used local variables
  MAINTAINERS, EDAC: Drop bouncing email
  EDAC, i82975x: Fix spelling mistake "reserverd" -> "reserved"
  EDAC, fsl: Move error injection under CONFIG_EDAC_DEBUG
  EDAC, skx: Let EDAC core show the decoded result for debugfs
  EDAC, skx: Move debugfs node under EDAC's hierarchy
  EDAC, skx: Prepend hex formatting with '0x'
  EDAC, skx: Fix function calling order in skx_exit()
  EDAC: Drop per-memory controller buses
  EDAC: Don't add devices under /sys/bus/edac
  EDAC: Fix indentation issues in several EDAC drivers
  EDAC, skx: Fix randconfig builds in a better way
  EDAC, i82975x: Remove set but not used variable dtype
  EDAC, qcom_edac: Remove irq_handled local variable
  EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller
  EDAC, synopsys: Add ECC support for ZynqMP DDR controller
  EDAC, synopsys: Add macro defines for ZynqMP DDRC
  dt: bindings: Document ZynqMP DDRC in Synopsys documentation
  EDAC, synopsys: Add error handling for the of_device_get_match_data() result
  ...

Pull sound updates from Takashi Iwai:
 "There are no intensive changes in both ALSA and ASoC core parts while
  rather most of changes are a bunch of driver fixes and updates. A
  large diff pattern appears in ASoC TI part which now merges both OMAP
  and DaVinci stuff, but the rest spreads allover the places.

  Note that this pull request includes also some updates for LED trigger
  and platform drivers for mute LEDs, appearing in the diffstat as well.

  Some highlights:

  ASoC:
   - Preparatory work for merging the audio-graph and audio-graph-scu
     cards
   - A merge of TI OMAP and DaVinci directories, as both product lines
     get merged together. Also including a few architecture changes as
     well.
   - Major cleanups of the Maxim MAX9867 driver
   - Small fixes for tablets & co with Intel BYT/CHT chips
   - Lots of rsnd updates as usual
   - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
     RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx
     I2S controllers

  HD-audio:
   - Introduce audio-mute LED trigger for replacing the former hackish
     dynamic binding
   - Huawei WMI hotkey and mute LED support
   - Refactoring of PM code and display power controls
   - Headset button support in the generic jack code
   - A few updates for Tegra
   - Fixups for HP EliteBook and ASUS UX391UA
   - Lots of updates for Intel ASoC HD-audio, including the improved DSP
     detection and the fallback binding from ASoC SST to legacy HD-audio
     controller drivers

  Others:
   - Updates for FireWire TASCAM and Fireface devices, some other fixes
   - A few potential Spectre v1 fixes that are all trivial"

* tag 'sound-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection
  ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected
  ALSA: HDA: export process_unsol_events()
  ALSA: hda/realtek: Enable audio jacks of ASUS UX391UA with ALC294
  ALSA: bebob: fix model-id of unit for Apogee Ensemble
  ALSA: emu10k1: Fix potential Spectre v1 vulnerabilities
  ALSA: rme9652: Fix potential Spectre v1 vulnerability
  ASoC: ti: Kconfig: Remove the deprecated options
  ARM: davinci_all_defconfig: Update the audio options
  ARM: omap1_defconfig: Do not select ASoC by default
  ARM: omap2plus_defconfig: Update the audio options
  ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options
  ARM: OMAP2: Update for new MCBSP Kconfig option
  ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option
  MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support
  ASoC: ti: Merge davinci and omap directories
  ALSA: hda: add mute LED support for HP EliteBook 840 G4
  ALSA: fireface: code refactoring to handle model-specific registers
  ALSA: fireface: add support for packet streaming on Fireface 800
  ALSA: fireface: allocate isochronous resources in mode-specific implementation
  ...

Pull more media updates from Mauro Carvalho Chehab:
 "The Intel IPU3 camera driver"

* tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (23 commits)
  media: staging/ipu3-imgu: Add MAINTAINERS entry
  media: staging/ipu3-imgu: Address documentation comments
  media: v4l: Add Intel IPU3 meta buffer formats
  media: doc-rst: Add Intel IPU3 documentation
  media: ipu3-imgu: Fix firmware binary location
  media: ipu3-imgu: Fix compiler warnings
  media: staging/intel-ipu3: Add dual pipe support
  media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI
  media: staging/intel-ipu3: Add imgu top level pci device driver
  media: staging/intel-ipu3: Add v4l2 driver based on media framework
  media: staging/intel-ipu3: Add css pipeline programming
  media: staging/intel-ipu3: css: Initialize css hardware
  media: staging/intel-ipu3: css: Compute and program ccs
  media: staging/intel-ipu3: css: Add static settings for image pipeline
  media: staging/intel-ipu3: css: Add support for firmware management
  media: staging/intel-ipu3: css: Add dma buff pool utility functions
  media: staging/intel-ipu3: Implement DMA mapping functions
  media: staging/intel-ipu3: mmu: Implement driver
  media: staging/intel-ipu3: abi: Add structs
  media: staging/intel-ipu3: abi: Add register definitions and enum
  ...

Pull media updates from Mauro Carvalho Chehab:
 "First set of media patches contains:

   - Three new platform drivers: aspeed-video seco-sed and sun5i-csi;

   - One new sensor driver: imx214;

   - Support for Xbox DVD Movie Playback kit remote controller;

   - Removal of the legacy friio driver. The functionalities were ported
     to another driver, already merged;

   - New staging driver: Rockchip VPU;

   - Added license text or SPDX tags to all media documentation files;

   - Usual set of cleanup, fixes and enhancements"

* tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (263 commits)
  media: cx23885: only reset DMA on problematic CPUs
  media: ddbridge: Move asm includes after linux ones
  media: drxk_hard: check if parameter is not NULL
  media: docs: fix some GPL licensing ambiguity at the text
  media: platform: Add Aspeed Video Engine driver
  media: dt-bindings: media: Add Aspeed Video Engine binding documentation
  media: vimc: fix start stream when link is disabled
  media: v4l2-device: Link subdevices to their parent devices if available
  media: siano: Use kmemdup instead of duplicating its function
  media: rockchip vpu: remove some unused vars
  media: cedrus: don't initialize pointers with zero
  media: cetrus: return an error if alloc fails
  media: cedrus: Add device-tree compatible and variant for A64 support
  media: cedrus: Add device-tree compatible and variant for H5 support
  media: dt-bindings: media: cedrus: Add compatibles for the A64 and H5
  media: video-i2c: check if chip struct has set_power function
  media: video-i2c: support runtime PM
  media: staging: media: imx: Use of_node_name_eq for node name comparisons
  media: v4l2-subdev: document controls need _FL_HAS_DEVNODE
  media: vivid: Improve timestamping
  ...

Pull mtd updates from Boris Brezillon:
 "SPI NOR Core changes:
   - Parse the 4BAIT SFDP section
   - Add a bunch of SPI NOR entries to the flash_info table
   - Add the concept of SFDP fixups and use it to fix a bug on MX25L25635F
   - A bunch of minor cleanups/comestic changes

  NAND core changes:
   - kernel-doc miscellaneous fixes.
   - Third batch of fixes/cleanup to the raw NAND core impacting various
     controller drivers (ams-delta, marvell, fsmc, denali, tegra,
     vf610):
      * Stop to pass mtd_info objects to internal functions
      * Reorganize code to avoid forward declarations
      * Drop useless test in nand_legacy_set_defaults()
      * Move nand_exec_op() to internal.h
      * Add nand_[de]select_target() helpers
      * Pass the CS line to be selected in struct nand_operation
      * Make ->select_chip() optional when ->exec_op() is implemented
      * Deprecate the ->select_chip() hook
      * Move the ->exec_op() method to nand_controller_ops
      * Move ->setup_data_interface() to nand_controller_ops
      * Deprecate the dummy_controller field
      * Fix JEDEC detection
      * Provide a helper for polling GPIO R/B pin

  Raw NAND chip drivers changes:
   - Macronix:
      * Flag 1.8V AC chips with a broken GET_FEATURES(TIMINGS)

  Raw NAND controllers drivers changes:
   - Ams-delta:
      * Fix the error path
      * SPDX tag added
      * May be compiled with COMPILE_TEST=y
      * Conversion to ->exec_op() interface
      * Drop .IOADDR_R/W use
      * Use GPIO API for data I/O
   - Denali:
      * Remove denali_reset_banks()
      * Remove ->dev_ready() hook
      * Include <linux/bits.h> instead of <linux/bitops.h>
      * Changes to comply with the above fixes/cleanup done in the core.
   - FSMC:
      * Add an SPDX tag to replace the license text
      * Make conversion from chip to fsmc consistent
      * Fix unchecked return value in fsmc_read_page_hwecc
      * Changes to comply with the above fixes/cleanup done in the core.
   - Marvell:
      * Prevent timeouts on a loaded machine (fix)
      * Changes to comply with the above fixes/cleanup done in the core.
   - OMAP2:
      * Pass the parent of pdev to dma_request_chan() (fix)
   - R852:
      * Use generic DMA API
   - sh_flctl:
      * Convert to SPDX identifiers
   - Sunxi:
      * Write pageprog related opcodes to the right register: WCMD_SET (fix)
   - Tegra:
      * Stop implementing ->select_chip()
   - VF610:
      * Add an SPDX tag to replace the license text
      * Changes to comply with the above fixes/cleanup done in the core.
   - Various trivial/spelling/coding style fixes.

  SPI-NAND drivers changes:
   - Remove the depreacated mt29f_spinand driver from staging.
   - Add support for:
      * Toshiba TC58CVG2S0H
      * GigaDevice GD5FxGQ4xA
      * Winbond W25N01GV

  JFFS2 changes:
   - Fix a lockdep issue

  MTD changes:
   - Rework the physmap driver to merge gpio-addr-flash and physmap_of
     in it
   - Add a new compatible for RedBoot partitions
   - Make sub-partitions RW if the parent partition was RO because of a
     mis-alignment
   - Add pinctrl support to the
   - Addition of /* fall-through */ comments where appropriate
   - Various minor fixes and cleanups

  Other changes:
   - Update my email address"

* tag 'mtd/for-4.21' of git://git.infradead.org/linux-mtd: (108 commits)
  mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET
  MAINTAINERS: Update my email address
  mtd: rawnand: marvell: prevent timeouts on a loaded machine
  mtd: rawnand: omap2: Pass the parent of pdev to dma_request_chan()
  mtd: rawnand: Fix JEDEC detection
  mtd: spi-nor: Add support for is25lp016d
  mtd: spi-nor: parse SFDP 4-byte Address Instruction Table
  mtd: spi-nor: Add 4B_OPCODES flag to is25lp256
  mtd: spi-nor: Add an SPDX tag to spi-nor.{c,h}
  mtd: spi-nor: Make the enable argument passed to set_byte() a bool
  mtd: spi-nor: Stop passing flash_info around
  mtd: spi-nor: Avoid forward declaration of internal functions
  mtd: spi-nor: Drop inline on all internal helpers
  mtd: spi-nor: Add a post BFPT fixup for MX25L25635E
  mtd: spi-nor: Add a post BFPT parsing fixup hook
  mtd: spi-nor: Add the SNOR_F_4B_OPCODES flag
  mtd: spi-nor: cast to u64 to avoid uint overflows
  mtd: spi-nor: Add support for IS25LP032/064
  mtd: spi-nor: add entry for mt35xu512aba flash
  mtd: spi-nor: add macros related to MICRON flash
  ...

Pull initial i3c support from Boris Brezillon:
 "Add initial support for I3C along with two I3C master controller
  drivers"

* tag 'i3c/for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: cdns: fix I2C transfers in Cadence I3C master driver
  ic3: off by one in mode_show()
  i3c: fix an error code in i3c_master_add_i3c_dev_locked()
  i3c: master: dw: fix mask operation by using the correct operator
  MAINTAINERS: Add myself as the dw-i3c-master module maintainer
  dt-binding: i3c: Document Synopsys DesignWare I3C
  i3c: master: Add driver for Synopsys DesignWare IP
  i3c: master: Remove set but not used variable 'old_i3c_scl_lim'
  dt-bindings: i3c: Document Cadence I3C master bindings
  i3c: master: Add driver for Cadence IP
  MAINTAINERS: Add myself as the I3C subsystem maintainer
  dt-bindings: i3c: Document core bindings
  i3c: Add sysfs ABI spec
  docs: driver-api: Add I3C documentation
  i3c: Add core I3C infrastructure

Pull drm updates from Dave Airlie:
 "Core:
   - shared fencing staging removal
   - drop transactional atomic helpers and move helpers to new location
   - DP/MST atomic cleanup
   - Leasing cleanups and drop EXPORT_SYMBOL
   - Convert drivers to atomic helpers and generic fbdev.
   - removed deprecated obj_ref/unref in favour of get/put
   - Improve dumb callback documentation
   - MODESET_LOCK_BEGIN/END helpers

  panels:
   - CDTech panels, Banana Pi Panel, DLC1010GIG,
   - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
   - Himax HX8357D, simulated RTSM AEMv8.
   - GPD Win2 panel
   - AUO G101EVN010

  vgem:
   - render node support

  ttm:
   - move global init out of drivers
   - fix LRU handling for ghost objects
   - Support for simultaneous submissions to multiple engines

  scheduler:
   - timeout/fault handling changes to help GPU recovery
   - helpers for hw with preemption support

  i915:
   - Scaler/Watermark fixes
   - DP MST + powerwell fixes
   - PSR fixes
   - Break long get/put shmemfs pages
   - Icelake fixes
   - Icelake DSI video mode enablement
   - Engine workaround improvements

  amdgpu:
   - freesync support
   - GPU reset enabled on CI, VI, SOC15 dGPUs
   - ABM support in DC
   - KFD support for vega12/polaris12
   - SDMA paging queue on vega
   - More amdkfd code sharing
   - DCC scanout on GFX9
   - DC kerneldoc
   - Updated SMU firmware for GFX8 chips
   - XGMI PSP + hive reset support
   - GPU reset
   - DC trace support
   - Powerplay updates for newer Polaris
   - Cursor plane update fast path
   - kfd dma-buf support

  virtio-gpu:
   - add EDID support

  vmwgfx:
   - pageflip with damage support

  nouveau:
   - Initial Turing TU104/TU106 modesetting support

  msm:
   - a2xx gpu support for apq8060 and imx5
   - a2xx gpummu support
   - mdp4 display support for apq8060
   - DPU fixes and cleanups
   - enhanced profiling support
   - debug object naming interface
   - get_iova/page pinning decoupling

  tegra:
   - Tegra194 host1x, VIC and display support enabled
   - Audio over HDMI for Tegra186 and Tegra194

  exynos:
   - DMA/IOMMU refactoring
   - plane alpha + blend mode support
   - Color format fixes for mixer driver

  rcar-du:
   - R8A7744 and R8A77470 support
   - R8A77965 LVDS support

  imx:
   - fbdev emulation fix
   - multi-tiled scalling fixes
   - SPDX identifiers

  rockchip
   - dw_hdmi support
   - dw-mipi-dsi + dual dsi support
   - mailbox read size fix

  qxl:
   - fix cursor pinning

  vc4:
   - YUV support (scaling + cursor)

  v3d:
   - enable TFU (Texture Formatting Unit)

  mali-dp:
   - add support for linear tiled formats

  sun4i:
   - Display Engine 3 support
   - H6 DE3 mixer 0 support
   - H6 display engine support
   - dw-hdmi support
   - H6 HDMI phy support
   - implicit fence waiting
   - BGRX8888 support

  meson:
   - Overlay plane support
   - implicit fence waiting
   - HDMI 1.4 4k modes

  bridge:
   - i2c fixes for sii902x"

* tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits)
  drm/amd/display: Add fast path for cursor plane updates
  drm/amdgpu: Enable GPU recovery by default for CI
  drm/amd/display: Fix duplicating scaling/underscan connector state
  drm/amd/display: Fix unintialized max_bpc state values
  Revert "drm/amd/display: Set RMX_ASPECT as default"
  drm/amdgpu: Fix stub function name
  drm/msm/dpu: Fix clock issue after bind failure
  drm/msm/dpu: Clean up dpu_media_info.h static inline functions
  drm/msm/dpu: Further cleanups for static inline functions
  drm/msm/dpu: Cleanup the debugfs functions
  drm/msm/dpu: Remove dpu_irq and unused functions
  drm/msm: Make irq_postinstall optional
  drm/msm/dpu: Cleanup callers of dpu_hw_blk_init
  drm/msm/dpu: Remove unused functions
  drm/msm/dpu: Remove dpu_crtc_is_enabled()
  drm/msm/dpu: Remove dpu_crtc_get_mixer_height
  drm/msm/dpu: Remove dpu_dbg
  drm/msm: dpu: Remove crtc_lock
  drm/msm: dpu: Remove vblank_requested flag from dpu_crtc
  drm/msm: dpu: Separate crtc assignment from vblank enable
  ...

Pull x86 platform driver updates from Andy Shevchenko:

 - The USB Power Delivery discrete components now can be enumerated by
   i2c-multi-instantiate driver via several resources under single ACPI
   device node (ACPI ID is INT3515).

 - Touchscreen support is added for the Mediacom Flexbook Edge 11.

 - Mellanox driver got fixed due to updates in their firmware.

 - The power management stub driver for AtomISP v2 is fixed in order to
   support Intel Baytrail SoCs where same quirk is needed for S0ix to
   work.

 - Special key handling has been fixed for Favorites hotkey on Thinkpad,
   and Screen LOCK on ASUS.

 - Ideapad Yoga 2 13 has no HW rfkill switch, thus, driver has been
   updated to support this.

 - Few cleanups related to debugfs have been made in Intel IPS and Intel
   PMC drivers. Besides that Intel PMC has been extended to show more
   detailed information about Latency Tolerance

* tag 'platform-drivers-x86-v4.21-1' of git://git.infradead.org/linux-platform-drivers-x86: (41 commits)
  platform/x86: mlx-platform: Convert to use SPDX identifier
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Allow mlxreg-io driver activation for new systems
  platform/x86: mlx-platform: Fix LED configuration
  platform/x86: mlx-platform: Fix tachometer registers
  platform/x86: mlx-platform: Rename new systems product names
  platform/x86: mlx-platform: Add definitions for new registers
  platform/x86: intel_telemetry: convert to DEFINE_SHOW_ATTRIBUTE
  platform/x86: intel_pmc_core: convert to DEFINE_SHOW_ATTRIBUTE
  platform/x86: thinkpad_acpi: Cleanup quirks macros
  platform/x86: touchscreen_dmi: Add info for the Mediacom Flexbook Edge 11
  platform/x86: Fix config space access for intel_atomisp2_pm
  platform/x86: Add the VLV ISP PCI ID to atomisp2_pm
  platform/x86: intel_ips: Convert to use DEFINE_SHOW_ATTRIBUTE macro
  platform/x86: intel_ips: Remove never happen condition
  platform/x86: intel_ips: NULL check before some freeing functions is not needed
  platform/x86: intel_ips: remove unnecessary checks in ips_debugfs_init
  iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  ACPI / scan: Create platform device for INT3515 ACPI nodes
  platform/x86: i2c-multi-instantiate: Allow to have same slaves
  ...

Document RZ/G2E (R8A774C0) SoC bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

i.MX PWM module's ipg_clk_s is for PWM register access, on most of i.MX
SoCs, this ipg_clk_s is from system ipg clock or perclk which is always
enabled, but on i.MX7D, the ipg_clk_s is from PWM1_CLK_ROOT which is
controlled by CCGR132, that means the CCGR132 MUST be enabled first
before accessing PWM registers on i.MX7D. This patch adds ipg clock
operation to make sure register access successfully on i.MX7D and it
fixes Linux kernel boot up hang during PWM driver probe.

Fixes: 4a23e6ee ("ARM: dts: imx7d-sdb: Restore pwm backlight support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Commit e39c0df1 ("pwm: Introduce the pwm_args concept") has
changed the variable for the period for clps711x-pwm driver, so now
pwm_get/set_period() works with pwm->state.period variable instead
of pwm->args.period.
This patch changes the period variable in other places where it is used.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.

Cc: Bart Tanghe <bart.tanghe@thomasmore.be>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The Cygnus architecture uses a Kona PWM. This is already present in the
device tree but can't be built actually. Hence, allow the Kona PWM to
be built for the Cygnus architecture.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Pull vfs fixes from Al Viro:
 "A couple of fixes - no common topic ;-)"

[ The aio spectre patch also came in from Jens, so now we have that
  doubly fixed .. ]

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  proc/sysctl: don't return ENOMEM on lookup when a table is unregistering
  aio: fix spectre gadget in lookup_ioctx

Pull SCSI fixes from James Bottomley:
 "This is two simple target fixes and one discard related I/O starvation
  problem in sd.

  The discard problem occurs because the discard page doesn't have a
  mempool backing so if the allocation fails due to memory pressure, we
  then lose the forward progress we require if the writeout is on the
  same device. The fix is to back it with a mempool"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: use mempool for discard special page
  scsi: target: iscsi: cxgbit: add missing spin_lock_init()
  scsi: target: iscsi: cxgbit: fix csk leak

Pull compiler_types.h fix from Miguel Ojeda:
 "A cleanup for userspace in compiler_types.h: don't pollute userspace
  with macro definitions (Xiaozhou Liu)

  This is harmless for the kernel, but v4.19 was released with a few
  macros exposed to userspace as the patch explains; which this removes,
  so it *could* happen that we break something for someone (although
  leaving inline redefined is probably worse)"

* tag 'compiler-attributes-for-linus-v4.20' of https://github.com/ojeda/linux:
  include/linux/compiler_types.h: don't pollute userspace with macro definitions

Pull auxdisplay fix from Miguel Ojeda:
 "charlcd: fix x/y command parsing (Mans Rullgard)"

* tag 'auxdisplay-for-linus-v4.20' of https://github.com/ojeda/linux:
  auxdisplay: charlcd: fix x/y command parsing

This reverts commit 55956b59.

commit 55956b59 ("vfs: Allow userns root to call mknod on owned filesystems.")
enabled mknod() in user namespaces for userns root if CAP_MKNOD is
available. However, these device nodes are useless since any filesystem
mounted from a non-initial user namespace will set the SB_I_NODEV flag on
the filesystem. Now, when a device node s created in a non-initial user
namespace a call to open() on said device node will fail due to:

bool may_open_dev(const struct path *path)
{
        return !(path->mnt->mnt_flags & MNT_NODEV) &&
                !(path->mnt->mnt_sb->s_iflags & SB_I_NODEV);
}

The problem with this is that as of the aforementioned commit mknod()
creates partially functional device nodes in non-initial user namespaces.
In particular, it has the consequence that as of the aforementioned commit
open() will be more privileged with respect to device nodes than mknod().
Before it was the other way around. Specifically, if mknod() succeeded
then it was transparent for any userspace application that a fatal error
must have occured when open() failed.

All of this breaks multiple userspace workloads and a widespread assumption
about how to handle mknod(). Basically, all container runtimes and systemd
live by the slogan "ask for forgiveness not permission" when running user
namespace workloads. For mknod() the assumption is that if the syscall
succeeds the device nodes are useable irrespective of whether it succeeds
in a non-initial user namespace or not. This logic was chosen explicitly
to allow for the glorious day when mknod() will actually be able to create
fully functional device nodes in user namespaces.
A specific problem people are already running into when running 4.18 rc
kernels are failing systemd services. For any distro that is run in a
container systemd services started with the PrivateDevices= property set
will fail to start since the device nodes in question cannot be
opened (cf. the arguments in [1]).

Full disclosure, Seth made the very sound argument that it is already
possible to end up with partially functional device nodes. Any filesystem
mounted with MS_NODEV set will allow mknod() to succeed but will not allow
open() to succeed. The difference to the case here is that the MS_NODEV
case is transparent to userspace since it is an explicitly set mount option
while the SB_I_NODEV case is an implicit property enforced by the kernel
and hence opaque to userspace.

[1]: https://github.com/systemd/systemd/pull/9483Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We really need the writecombine flag in dma_alloc_wc, fix a stupid
oversight.

Fixes: 7ed1d91a ("dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc fixes from Andrew Morton:
 "4 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, page_alloc: fix has_unmovable_pages for HugePages
  fork,memcg: fix crash in free_thread_stack on memcg charge fail
  mm: thp: fix flags for pmd migration when split
  mm, memory_hotplug: initialize struct pages for the full memory section

While playing with gigantic hugepages and memory_hotplug, I triggered
the following #PF when "cat memoryX/removable":

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 1481 Comm: cat Tainted: G            E     4.20.0-rc6-mm1-1-default+ #18
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:has_unmovable_pages+0x154/0x210
  Call Trace:
   is_mem_section_removable+0x7d/0x100
   removable_show+0x90/0xb0
   dev_attr_show+0x1c/0x50
   sysfs_kf_seq_show+0xca/0x1b0
   seq_read+0x133/0x380
   __vfs_read+0x26/0x180
   vfs_read+0x89/0x140
   ksys_read+0x42/0x90
   do_syscall_64+0x5b/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is we do not pass the Head to page_hstate(), and so, the call
to compound_order() in page_hstate() returns 0, so we end up checking
all hstates's size to match PAGE_SIZE.

Obviously, we do not find any hstate matching that size, and we return
NULL.  Then, we dereference that NULL pointer in
hugepage_migration_supported() and we got the #PF from above.

Fix that by getting the head page before calling page_hstate().

Also, since gigantic pages span several pageblocks, re-adjust the logic
for skipping pages.  While are it, we can also get rid of the
round_up().

[osalvador@suse.de: remove round_up(), adjust skip pages logic per Michal]
  Link: http://lkml.kernel.org/r/20181221062809.31771-1-osalvador@suse.de
Link: http://lkml.kernel.org/r/20181217225113.17864-1-osalvador@suse.deSigned-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9b6f7e16 ("mm: rework memcg kernel stack accounting") will
result in fork failing if allocating a kernel stack for a task in
dup_task_struct exceeds the kernel memory allowance for that cgroup.

Unfortunately, it also results in a crash.

This is due to the code jumping to free_stack and calling
free_thread_stack when the memcg kernel stack charge fails, but without
tsk->stack pointing at the freshly allocated stack.

This in turn results in the vfree_atomic in free_thread_stack oopsing
with a backtrace like this:

#5 [ffffc900244efc88] die at ffffffff8101f0ab
 #6 [ffffc900244efcb8] do_general_protection at ffffffff8101cb86
 #7 [ffffc900244efce0] general_protection at ffffffff818ff082
    [exception RIP: llist_add_batch+7]
    RIP: ffffffff8150d487  RSP: ffffc900244efd98  RFLAGS: 00010282
    RAX: 0000000000000000  RBX: ffff88085ef55980  RCX: 0000000000000000
    RDX: ffff88085ef55980  RSI: 343834343531203a  RDI: 343834343531203a
    RBP: ffffc900244efd98   R8: 0000000000000001   R9: ffff8808578c3600
    R10: 0000000000000000  R11: 0000000000000001  R12: ffff88029f6c21c0
    R13: 0000000000000286  R14: ffff880147759b00  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ffffc900244efda0] vfree_atomic at ffffffff811df2c7
 #9 [ffffc900244efdb8] copy_process at ffffffff81086e37
#10 [ffffc900244efe98] _do_fork at ffffffff810884e0
#11 [ffffc900244eff10] sys_vfork at ffffffff810887ff
#12 [ffffc900244eff20] do_syscall_64 at ffffffff81002a43
    RIP: 000000000049b948  RSP: 00007ffcdb307830  RFLAGS: 00000246
    RAX: ffffffffffffffda  RBX: 0000000000896030  RCX: 000000000049b948
    RDX: 0000000000000000  RSI: 00007ffcdb307790  RDI: 00000000005d7421
    RBP: 000000000067370f   R8: 00007ffcdb3077b0   R9: 000000000001ed00
    R10: 0000000000000008  R11: 0000000000000246  R12: 0000000000000040
    R13: 000000000000000f  R14: 0000000000000000  R15: 000000000088d018
    ORIG_RAX: 000000000000003a  CS: 0033  SS: 002b

The simplest fix is to assign tsk->stack right where it is allocated.

Link: http://lkml.kernel.org/r/20181214231726.7ee4843c@imladris.surriel.com
Fixes: 9b6f7e16 ("mm: rework memcg kernel stack accounting")
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When splitting a huge migrating PMD, we'll transfer all the existing PMD
bits and apply them again onto the small PTEs.  However we are fetching
the bits unconditionally via pmd_soft_dirty(), pmd_write() or
pmd_yound() while actually they don't make sense at all when it's a
migration entry.  Fix them up.  Since at it, drop the ifdef together as
not needed.

Note that if my understanding is correct about the problem then if
without the patch there is chance to lose some of the dirty bits in the
migrating pmd pages (on x86_64 we're fetching bit 11 which is part of
swap offset instead of bit 2) and it could potentially corrupt the
memory of an userspace program which depends on the dirty bit.

Link: http://lkml.kernel.org/r/20181213051510.20306-1-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: <stable@vger.kernel.org>	[4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized.  This may lead
to VM_BUG_ON due to uninitialized struct page access from
is_mem_section_removable() or test_pages_in_a_zone() function triggered
by memory_hotplug sysfs handlers:

Here are the the panic examples:
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_VM_PGFLAGS=y

 kernel parameter mem=2050M
 --------------------------
 page:000003d082008000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( test_pages_in_a_zone+0xde/0x160)
   show_valid_zones+0x5c/0x190
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   test_pages_in_a_zone+0xde/0x160
 Kernel panic - not syncing: Fatal exception: panic_on_oops

 kernel parameter mem=3075M
 --------------------------
 page:000003d08300c000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( is_mem_section_removable+0xb4/0x190)
   show_mem_removable+0x9a/0xd8
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   is_mem_section_removable+0xb4/0x190
 Kernel panic - not syncing: Fatal exception: panic_on_oops

Fix the problem by initializing the last memory section of each zone in
memmap_init_zone() till the very end, even if it goes beyond the zone end.

Michal said:

: This has alwways been problem AFAIU.  It just went unnoticed because we
: have zeroed memmaps during allocation before f7f99100 ("mm: stop
: zeroing memory during allocation in vmemmap") and so the above test
: would simply skip these ranges as belonging to zone 0 or provided a
: garbage.
:
: So I guess we do care for post f7f99100 kernels mostly and
: therefore Fixes: f7f99100 ("mm: stop zeroing memory during
: allocation in vmemmap")

Link: http://lkml.kernel.org/r/20181212172712.34019-2-zaslonko@linux.ibm.com
Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sparc fixes from David Miller:
 "Just some small fixes here and there, and a refcount leak in a serial
  driver, nothing serious"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  serial/sunsu: fix refcount leak
  sparc: Set "ARCH: sunxx" information on the same line
  sparc: vdso: Drop implicit common-page-size linker flag

Pull more networking fixes from David Miller:
 "Some more bug fixes have trickled in, we have:

  1) Local MAC entries properly in mscc driver, from Allan W. Nielsen.

  2) Eric Dumazet found some more of the typical "pskb_may_pull() -->
     oops forgot to reload the header pointer" bugs in ipv6 tunnel
     handling.

  3) Bad SKB socket pointer in ipv6 fragmentation handling, from Herbert
     Xu.

  4) Overflow fix in sk_msg_clone(), from Vakul Garg.

  5) Validate address lengths in AF_PACKET, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixup
  qmi_wwan: Add support for Fibocom NL678 series
  tls: Do not call sk_memcopy_from_iter with zero length
  ipv6: tunnels: fix two use-after-free
  Prevent overflow of sk_msg in sk_msg_clone()
  packet: validate address length
  net: netxen: fix a missing check and an uninitialized use
  tcp: fix a race in inet_diag_dump_icsk()
  MAINTAINERS: update cxgb4 and cxgb3 maintainer
  ipv6: frags: Fix bogus skb->sk in reassembled packets
  mscc: Configured MAC entries should be locked.

The x/y command parsing has been broken since commit 12995706
("staging: panel: Fixed checkpatch warning about simple_strtoul()").

Commit b34050fa ("auxdisplay: charlcd: Fix and clean up handling of
x/y commands") fixed some problems by rewriting the parsing code,
but also broke things further by removing the check for a complete
command before attempting to parse it.  As a result, parsing is
terminated at the first x or y character.

This reinstates the check for a final semicolon.  Whereas the original
code use strchr(), this is wasteful seeing as the semicolon is always
at the end of the buffer.  Thus check this character directly instead.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.

su_get_type() doesn't do that. The match node are used as an identifier
to compare against the current node, so we can directly drop the refcount
after getting the node from the path as it is not used as pointer.

Fix this by use a single variable and drop the refcount right after
of_find_node_by_path().
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While checking boot log from SPARC qemu, I saw that the "ARCH: sunxx"
information was split on two different line.
This patchs merge both line together.
In the meantime, thoses information need to be printed via pr_info
since printk print them by default via the warning loglevel.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GNU linker's -z common-page-size's default value is based on the target
architecture. arch/sparc/vdso/Makefile sets it to the architecture
default, which is implicit and redundant. Drop it.

Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.comSigned-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>