- 19 Mar, 2012 18 commits
-
-
Ben Hutchings authored
[ Upstream commit ff3bc1e7 ] When pre-allocating skbs for received packets, we set ip_summed = CHECKSUM_UNNCESSARY. We used to change it back to CHECKSUM_NONE when the received packet had an incorrect checksum or unhandled protocol. Commit bc8acf2c ('drivers/net: avoid some skb->ip_summed initializations') mistakenly replaced the latter assignment with a DEBUG-only assertion that ip_summed == CHECKSUM_NONE. This assertion is always false, but it seems no-one has exercised this code path in a DEBUG build. Fix this by moving our assignment of CHECKSUM_UNNECESSARY into efx_rx_packet_gro(). Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben McKeegan authored
[ Upstream commit 8a49ad6e ] This patch fixes a (mostly cosmetic) bug introduced by the patch 'ppp: Use SKB queue abstraction interfaces in fragment processing' found here: http://www.spinics.net/lists/netdev/msg153312.html The above patch rewrote and moved the code responsible for cleaning up discarded fragments but the new code does not catch every case where this is necessary. This results in some discarded fragments remaining in the queue, and triggering a 'bad seq' error on the subsequent call to ppp_mp_reconstruct. Fragments are discarded whenever other fragments of the same frame have been lost. This can generate a lot of unwanted and misleading log messages. This patch also adds additional detail to the debug logging to make it clearer which fragments were lost and which other fragments were discarded as a result of losses. (Run pppd with 'kdebug 1' option to enable debug logging.) Signed-off-by:
Ben McKeegan <ben@netservers.co.uk> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 03606895 ] Niccolo Belli reported ipsec crashes in case we handle a frame without mac header (atm in his case) Before copying mac header, better make sure it is present. Bugzilla reference: https://bugzilla.kernel.org/show_bug.cgi?id=42809Reported-by:
Niccolò Belli <darkbasic@linuxsystems.it> Tested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Michel Machado authored
[ Upstream commit 84338a6c ] When the fixed race condition happens: 1. While function neigh_periodic_work scans the neighbor hash table pointed by field tbl->nht, it unlocks and locks tbl->lock between buckets in order to call cond_resched. 2. Assume that function neigh_periodic_work calls cond_resched, that is, the lock tbl->lock is available, and function neigh_hash_grow runs. 3. Once function neigh_hash_grow finishes, and RCU calls neigh_hash_free_rcu, the original struct neigh_hash_table that function neigh_periodic_work was using doesn't exist anymore. 4. Once back at neigh_periodic_work, whenever the old struct neigh_hash_table is accessed, things can go badly. Signed-off-by:
Michel Machado <michel@digirati.com.br> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 11aad99a ] This driver attempts to use two TX rings but lacks proper support : 1) IRQ handler only takes care of TX completion on first TX ring 2) the stop/start logic uses the legacy functions (for non multiqueue drivers) This means all packets witk skb mark set to 1 are sent through high queue but are never cleaned and queue eventualy fills and block the device, triggering the infamous "NETDEV WATCHDOG" message. Lets use a single TX ring to fix the problem, this driver is not a real multiqueue one yet. Minimal fix for stable kernels. Reported-by:
Thomas Meyer <thomas@m3y3r.de> Tested-by:
-
Ike Panhc authored
commit 461e7437 upstream. We have several reports which says acer-wmi is loaded on ideapads and register rfkill for wifi which can not be unblocked. Since ideapad-laptop also register rfkill for wifi and it works reliably, it will be fine acer-wmi is not going to register rfkill for wifi once VPC2004 is found. Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no wifi rfkill capability, there are reports which says acer-wmi also block wireless on Thinkpad E520/E420. Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Miklos Szeredi authored
commit 097b180c upstream. complete_walk() already puts nd->path, no need to do it again at cleanup time. This would result in Oopses if triggered, apparently the codepath is not too well exercised. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Miklos Szeredi authored
commit 7f6c7e62 upstream. complete_walk() returns either ECHILD or ESTALE. do_last() turns this into ECHILD unconditionally. If not in RCU mode, this error will reach userspace which is complete nonsense. Signed-off-by:
-
Pavel Shilovsky authored
commit d5751469 upstream. Reorganize the code to make the memory already allocated before spinlock'ed loop. Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Peter Zijlstra authored
commit 87e24f4b upstream. Verified using the below proglet.. before: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,101,554 node-stores 2,096,931 node-store-misses 5.021546079 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 501,137 node-stores 199 node-store-misses 5.124451068 seconds time elapsed After: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,107,516 node-stores 2,097,187 node-store-misses 5.012755149 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 2,063,355 node-stores 165 node-store-misses 5.082091494 seconds time elapsed #define _GNU_SOURCE #include <sched.h> #include <stdio.h> #include <errno.h> #include <sys/mman.h> #include <sys/types.h> #include <dirent.h> #include <signal.h> #include <unistd.h> #include <numaif.h> #include <stdlib.h> #define SIZE (32*1024*1024) volatile int done; void sig_done(int sig) { done = 1; } int main(int argc, char **argv) { cpu_set_t *mask, *mask2; size_t size; int i, err, t; int nrcpus = 1024; char *mem; unsigned long nodemask = 0x01; /* node 0 */ DIR *node; struct dirent *de; int read = 0; int local = 0; if (argc < 2) { printf("usage: %s [0-3]\n", argv[0]); printf(" bit0 - local/remote\n"); printf(" bit1 - read/write\n"); exit(0); } switch (atoi(argv[1])) { case 0: printf("remote write\n"); break; case 1: printf("local write\n"); local = 1; break; case 2: printf("remote read\n"); read = 1; break; case 3: printf("local read\n"); local = 1; read = 1; break; } mask = CPU_ALLOC(nrcpus); size = CPU_ALLOC_SIZE(nrcpus); CPU_ZERO_S(size, mask); node = opendir("/sys/devices/system/node/node0/"); if (!node) perror("opendir"); while ((de = readdir(node))) { int cpu; if (sscanf(de->d_name, "cpu%d", &cpu) == 1) CPU_SET_S(cpu, size, mask); } closedir(node); mask2 = CPU_ALLOC(nrcpus); CPU_ZERO_S(size, mask2); for (i = 0; i < size; i++) CPU_SET_S(i, size, mask2); CPU_XOR_S(size, mask2, mask2, mask); // invert if (!local) mask = mask2; err = sched_setaffinity(0, size, mask); if (err) perror("sched_setaffinity"); mem = mmap(0, SIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); err = mbind(mem, SIZE, MPOL_BIND, &nodemask, 8*sizeof(nodemask), MPOL_MF_MOVE); if (err) perror("mbind"); signal(SIGALRM, sig_done); alarm(5); if (!read) { while (!done) { for (i = 0; i < SIZE; i++) mem[i] = 0x01; } } else { while (!done) { for (i = 0; i < SIZE; i++) t += *(volatile char *)(mem + i); } } return 0; } Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-tq73sxus35xmqpojf7ootxgs@git.kernel.orgSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Stanislaw Gruszka authored
commit 3780d038 upstream. Is possible that we stop queue and then do not wake up it again, especially when packets are transmitted fast. That can be easily reproduced with modified tx queue entry_num to some small value e.g. 16. If mac80211 already hold local->queue_stop_reason_lock, then we can wait on that lock in both rt2x00queue_pause_queue() and rt2x00queue_unpause_queue(). After drooping ->queue_stop_reason_lock is possible that __ieee80211_wake_queue() will be performed before __ieee80211_stop_queue(), hence we stop queue and newer wake up it again. Another race condition is possible when between rt2x00queue_threshold() check and rt2x00queue_pause_queue() we will process all pending tx buffers on different cpu. This might happen if for example interrupt will be triggered on cpu performing rt2x00mac_tx(). To prevent race conditions serialize pause/unpause by queue->tx_lock. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Laurent Pinchart authored
commit bd0f2e6d upstream. The HS/VS interrupt handler needs to access the pipeline object. It erronously tries to get it from the CCDC output video node, which isn't necessarily included in the pipeline. This leads to a NULL pointer dereference. Fix the bug by getting the pipeline object from the CCDC subdev entity. Reported-by:
Gary Thomas <gary@mlbassoc.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Matthew Garrett authored
commit 4949be16 upstream. Right now we won't touch ASPM state if ASPM is disabled, except in the case where we find a device that appears to be too old to reliably support ASPM. Right now we'll clear it in that case, which is almost certainly the wrong thing to do. The easiest way around this is just to disable the blacklisting when ASPM is disabled. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Thomas Gleixner authored
commit a7f4255f upstream. Commit f0fbf0ab ("x86: integrate delay functions") converted delay_tsc() into a random delay generator for 64 bit. The reason is that it merged the mostly identical versions of delay_32.c and delay_64.c. Though the subtle difference of the result was: static void delay_tsc(unsigned long loops) { - unsigned bclock, now; + unsigned long bclock, now; Now the function uses rdtscl() which returns the lower 32bit of the TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64 bit this fails when the lower 32bit are close to wrap around when bclock is read, because the following check if ((now - bclock) >= loops) break; evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0 because the unsigned long (now - bclock) of these values results in 0xffffffff00000001 which is definitely larger than the loops value. That explains Tvortkos observation: "Because I am seeing udelay(500) (_occasionally_) being short, and that by delaying for some duration between 0us (yep) and 491us." Make those variables explicitely u32 again, so this works for both 32 and 64 bit. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit c7b28555 upstream. Current code has put_ioctx() called asynchronously from aio_fput_routine(); that's done *after* we have killed the request that used to pin ioctx, so there's nothing to stop io_destroy() waiting in wait_for_all_aios() from progressing. As the result, we can end up with async call of put_ioctx() being the last one and possibly happening during exit_mmap() or elf_core_dump(), neither of which expects stray munmap() being done to them... We do need to prevent _freeing_ ioctx until aio_fput_routine() is done with that, but that's all we care about - neither io_destroy() nor exit_aio() will progress past wait_for_all_aios() until aio_fput_routine() does really_put_req(), so the ioctx teardown won't be done until then and we don't care about the contents of ioctx past that point. Since actual freeing of these suckers is RCU-delayed, we don't need to bump ioctx refcount when request goes into list for async removal. All we need is rcu_read_lock held just over the ->ctx_lock-protected area in aio_fput_routine(). Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Acked-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Al Viro authored
commit 86b62a2c upstream. Have ioctx_alloc() return an extra reference, so that caller would drop it on success and not bother with re-grabbing it on failure exit. The current code is obviously broken - io_destroy() from another thread that managed to guess the address io_setup() would've returned would free ioctx right under us; gets especially interesting if aio_context_t * we pass to io_setup() points to PROT_READ mapping, so put_user() fails and we end up doing io_destroy() on kioctx another thread has just got freed... Signed-off-by:
-
Kailang Yang authored
commit 526af6eb upstream. The coef setup in alc269_fill_coef() was designed only for ALC269VB model, and this has some bad effects for other ALC269 variants, such as turning off the external mic input. Apply it only to ALC269VB. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Denis 'GNUtoo' Carikli authored
commit b2ccf065 upstream. The neo1973 driver had wrong codec name which prevented the "sound card" from appearing. Signed-off-by:
Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
- 13 Mar, 2012 2 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 315e73b4 as it breaks the 3.2-stable build. Reported-by:
Ben Guthro <ben@guthro.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
- 12 Mar, 2012 20 commits
-
-
Greg Kroah-Hartman authored
-
Ohad Ben-Cohen authored
commit 134d12fa upstream. For some weird (freudian?) reason, commit 435792d9 "ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp" unintentionally changed the mailbox's initcall instead of the iommu's. Fix that. Reported-by:
Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Danny Kukawka authored
commit c88db233 upstream. Rename static struct pci_driver pch_spi_pcidev to pch_spi_pcidev_driver to get rid of warnings from modpost checks. Signed-off-by:
Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Christian Gmeiner authored
commit 97e43c98 upstream. Silence following warnings: WARNING: drivers/mfd/cs5535-mfd.o(.data+0x20): Section mismatch in reference from the variable cs5535_mfd_drv to the function .devinit.text:cs5535_mfd_probe() The variable cs5535_mfd_drv references the function __devinit cs5535_mfd_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console WARNING: drivers/mfd/cs5535-mfd.o(.data+0x28): Section mismatch in reference from the variable cs5535_mfd_drv to the function .devexit.text:cs5535_mfd_remove() The variable cs5535_mfd_drv references the function __devexit cs5535_mfd_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Rename the variable from *_drv to *_driver so modpost ignore the OK references to __devinit/__devexit functions. Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by:
Andres Salomon <dilinger@queued.net> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Danny Kukawka authored
commit 474de3bb upstream. Fix scan_timers() to be __devinit and not __init since the function get called from cs5535_mfgpt_probe which is __devinit. Signed-off-by:
-
Jonathan E Brassow authored
commit 0ca93de9 upstream. Fix dm-raid flush support. Both md and dm have support for flush, but the dm-raid target forgot to set the flag to indicate that flushes should be passed on. (Important for data integrity e.g. with writeback cache enabled.) Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Acked-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Jonathan E Brassow authored
commit 3aa3b2b2 upstream. The 'rebuild' parameter is used to rebuild individual devices in an array (e.g. resynchronize a RAID1 device or recalculate a parity device in higher RAID). The MD_CHANGE_DEVS flag must be set when this parameter is given in order to write out the superblocks and make the change take immediate effect. The code that handles new devices in super_load already sets MD_CHANGE_DEVS and 'FirstUse'. (The 'FirstUse' flag was being set as a special case for rebuilds in super_init_validation.) Add a condition for rebuilds in super_load to take care of both flags without the special case in 'super_init_validation'. Signed-off-by:
-
Joe Thornber authored
commit af63bcb8 upstream. Correct the number of mapped sectors shown on a thin device's status line by decrementing td->mapped_blocks in __remove() each time a block is removed. Signed-off-by:
Joe Thornber <ejt@redhat.com> Acked-by:
-
Joe Thornber authored
commit 4469a5f3 upstream. If dm_sm_disk_create() fails the superblock must be unlocked. Signed-off-by:
-
Mike Snitzer authored
commit 1f3db25d upstream. The __open_device() error paths in __create_thin() and __create_snap() incorrectly call __close_device() even if td was not initialized by __open_device(). Remove this. Also document __open_device() return values, remove a redundant td->changed = 1 in __create_thin(), and insert an additional safeguard against creating an already-existing device. Signed-off-by:
-
Mike Snitzer authored
commit 1212268f upstream. The following BUG is hit on the first read that is submitted to a dm flakey test device while the device is "down" if the corrupt_bio_byte feature wasn't requested when the device's table was loaded. Example DM table that will hit this BUG: 0 2097152 flakey 8:0 2048 0 30 This bug was introduced by commit a3998799 (dm flakey: add corrupt_bio_byte feature) in v3.1-rc1. BUG: unable to handle kernel paging request at ffff8801cfce3fff IP: [<ffffffffa008c233>] corrupt_bio_data+0x6e/0xae [dm_flakey] PGD 1606063 PUD 0 Oops: 0002 [#1] SMP ... Call Trace: <IRQ> [<ffffffffa008c2b5>] flakey_end_io+0x42/0x48 [dm_flakey] [<ffffffffa00dca98>] clone_endio+0x54/0xb6 [dm_mod] [<ffffffff81130587>] bio_endio+0x2d/0x2f [<ffffffff811c819a>] req_bio_endio+0x96/0x9f [<ffffffff811c94b9>] blk_update_request+0x1dc/0x3a9 [<ffffffff812f5ee2>] ? rcu_read_unlock+0x21/0x23 [<ffffffff811c96a6>] blk_update_bidi_request+0x20/0x6e [<ffffffff811c9713>] blk_end_bidi_request+0x1f/0x5d [<ffffffff811c978d>] blk_end_request+0x10/0x12 [<ffffffff8128f450>] scsi_io_completion+0x1e5/0x4b1 [<ffffffff812882a9>] scsi_finish_command+0xec/0xf5 [<ffffffff8128f830>] scsi_softirq_done+0xff/0x108 [<ffffffff811ce284>] blk_done_softirq+0x84/0x98 [<ffffffff81048d19>] __do_softirq+0xe3/0x1d5 [<ffffffff8138f83f>] ? _raw_spin_lock+0x62/0x69 [<ffffffff810997cf>] ? handle_irq_event+0x4c/0x61 [<ffffffff8139833c>] call_softirq+0x1c/0x30 [<ffffffff81003b37>] do_softirq+0x4b/0xa3 [<ffffffff81048a39>] irq_exit+0x53/0xca [<ffffffff81398acd>] do_IRQ+0x9d/0xb4 [<ffffffff81390333>] common_interrupt+0x73/0x73 ... Signed-off-by:
-
Milan Broz authored
commit 0c535e0d upstream. This patch fixes a crash by recognising discards in dm_io. Currently dm_mirror can send REQ_DISCARD bios if running over a discard-enabled device and without support in dm_io the system crashes badly. BUG: unable to handle kernel paging request at 00800000 IP: __bio_add_page.part.17+0xf5/0x1e0 ... bio_add_page+0x56/0x70 dispatch_io+0x1cf/0x240 [dm_mod] ? km_get_page+0x50/0x50 [dm_mod] ? vm_next_page+0x20/0x20 [dm_mod] ? mirror_flush+0x130/0x130 [dm_mirror] dm_io+0xdc/0x2b0 [dm_mod] ... Introduced in 2.6.38-rc1 by commit 5fc2ffea (dm raid1: support discard). Signed-off-by:
Milan Broz <mbroz@redhat.com> Acked-by:
-
Jesper Juhl authored
commit 902c6a96 upstream. If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Jan Beulich authored
commit 6b7f000e upstream. This function is called from enable_iommus(), which in turn is used from amd_iommu_resume(). Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Sebastian Siewior authored
commit 4231d47e upstream. |kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Reported-by:
AnÃbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Marek Olšák authored
commit cf00790d upstream. Mesa may set it to 1, causing all primitives to be killed. v2: also update the r7xx code Signed-off-by:
Marek Olšák <maraeo@gmail.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Christian Lamparter authored
commit 9926a675 upstream. Nicolas Cavallari discovered that carl9170 has some serious problems delivering data to sleeping stations. It turns out that the driver was not honoring two important flags (IEEE80211_TX_CTL_POLL_RESPONSE and IEEE80211_TX_CTL_CLEAR_PS_FILT) which are set on frames that should be sent although the receiving station is still in powersave mode. Reported-by:
Nicolas Cavallari <Nicolas.Cavallari@lri.fr> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Nicolas Cavallari authored
commit 992d5252 upstream. On Access Point mode, when transmitting a packet, if the destination station is in powersave mode, we abort transmitting the packet to the device queue, but we do not reclaim the allocated memory. Given enough packets, we can go in a state where there is no packet on the device queue, but we think the device has no memory left, so no packet gets transmitted, connections breaks and the AP stops working. This undo the allocation done in the TX path when the station is in power-save mode. Signed-off-by:
Nicolas Cavallari <cavallar@lri.fr> Acked-by:
-
Guenter Roeck authored
commit 7ad6307a upstream. A global delay parameter has the side effect of being overwritten with 0 if a single ZL2004 or ZL6105 is instantiated. If other chips supported by the same driver are in the system, this will result in access errors for those chips. To solve the problem, keep a per-instance copy of the delay parameter, and do not change the original parameter. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Guenter Roeck authored
commit 1bd612a2 upstream. Also update IDT datasheet locations. Signed-off-by:
-
