- 05 Dec, 2019 24 commits
-
-
Chuhong Yuan authored
[ Upstream commit c43eab3e ] This driver forgets to disable and unprepare clks when remove. Add calls to clk_disable_unprepare to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tony Lindgren authored
[ Upstream commit 81a41901 ] Commit 3d8598fb ("clk: ti: clkctrl: use fallback udelay approach if timekeeping is suspended") added handling for cases when timekeeping is suspended. But looks like we can still get occasional "failed to enable" errors on the PM runtime resume path with udelay() returning faster than expected. With ti-sysc interconnect target module driver this leads into device failure with PM runtime failing with "failed to enable" clkctrl error. Let's fix the issue with a delay of two times the desired delay as in often done for udelay() to account for the inaccuracy. Fixes: 3d8598fb ("clk: ti: clkctrl: use fallback udelay approach if timekeeping is suspended") Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Link: https://lkml.kernel.org/r/20190930154001.46581-1-tony@atomide.comTested-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 9982b0f6 ] ti_clk_register() calls it already so the driver should not create duplicated alias. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lkml.kernel.org/r/20191002083436.10194-1-peter.ujfalusi@ti.comSigned-off-by:
-
Xiaochen Shen authored
[ Upstream commit 26467b0f ] When a mon group is being deleted, rdtgrp->flags is set to RDT_DELETED in rdtgroup_rmdir_mon() firstly. The structure of rdtgrp will be freed until rdtgrp->waitcount is dropped to 0 in rdtgroup_kn_unlock() later. During the window of deleting a mon group, if an application calls rdtgroup_mondata_show() to read mondata under this mon group, 'rdtgrp' returned from rdtgroup_kn_lock_live() is a NULL pointer when rdtgrp->flags is RDT_DELETED. And then 'rdtgrp' is passed in this path: rdtgroup_mondata_show() --> mon_event_read() --> mon_event_count(). Thus it results in NULL pointer dereference in mon_event_count(). Check 'rdtgrp' in rdtgroup_mondata_show(), and return -ENOENT immediately when reading mondata during the window of deleting a mon group. Fixes: d89b7379 ("x86/intel_rdt/cqm: Add mon_data") Signed-off-by:
Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Fenghua Yu <fenghua.yu@intel.com> Reviewed-by:
Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: pei.p.jia@intel.com Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1572326702-27577-1-git-send-email-xiaochen.shen@intel.comSigned-off-by:
-
Matthew Wilcox (Oracle) authored
[ Upstream commit b7e9728f ] Attempting to allocate an entry at 0xffffffff when one is already present would succeed in allocating one at 2^32, which would confuse everything. Return -ENOSPC in this case, as expected. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
[ Upstream commit f6341c5a ] If there is an entry at INT_MAX then idr_for_each_entry() will increment id after handling it. This is undefined behaviour, and is caught by UBSAN. Adding 1U to id forces the operation to be carried out as an unsigned addition which (when assigned to id) will result in INT_MIN. Since there is never an entry stored at INT_MIN, idr_get_next() will return NULL, ending the loop as expected. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7de08690 ] We have seen many crashes on powerpc hosts while loading bpf programs. The problem here is that bpf_int_jit_compile() does a first pass to compute the program length. Then it allocates memory to store the generated program and calls bpf_jit_build_body() a second time (and a third time later) What I have observed is that the second bpf_jit_build_body() could end up using few more words than expected. If bpf_jit_binary_alloc() put the space for the program at the end of the allocated page, we then write on a non mapped memory. It appears that bpf_jit_emit_tail_call() calls bpf_jit_emit_common_epilogue() while ctx->seen might not be stable. Only after the second pass we can be sure ctx->seen wont be changed. Trying to avoid a second pass seems quite complex and probably not worth it. Fixes: ce076141 ("powerpc/bpf: Implement support for tail calls") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20191101033444.143741-1-edumazet@google.comSigned-off-by:
-
Björn Töpel authored
[ Upstream commit 04ec044b ] To remove that test_attr__{enabled/open} are used by perf-sys.h, we set HAVE_ATTR_TEST to zero. Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Tested-by:
KP Singh <kpsingh@google.com> Acked-by:
Song Liu <songliubraving@fb.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Ondrej Jirman authored
[ Upstream commit e614f341 ] Without enabling keep-power-in-suspend, we can't wake the device up using WOL packet, and the log is flooded with these messages on resume: sunxi-mmc 1c10000.mmc: send stop command failed sunxi-mmc 1c10000.mmc: data error, sending stop command sunxi-mmc 1c10000.mmc: send stop command failed sunxi-mmc 1c10000.mmc: data error, sending stop command So to make the WiFi really a wakeup-source, we need to keep it powered during suspend. Fixes: 0e233720 ("arm: dts: sun8i: Add the TBS A711 tablet devicetree") Signed-off-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit cdfc2e20 ] The zero'ing of bits 16 and 18 is incorrect. Currently the code is masking with the bitwise-and of BIT(16) & BIT(18) which is 0, so the updated value for val is always zero. Fix this by bitwise and-ing value with the correct mask that will zero bits 16 and 18. Addresses-Coverity: (" Suspicious &= or |= constant expression") Fixes: b8eb71dc ("clk: sunxi-ng: Add A80 CCU") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit afdc74ed ] r375326 in Clang exposes an issue with operator precedence in sunxi_div_clk_setup: drivers/clk/sunxi/clk-sunxi.c:1083:30: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] data->div[i].critical ? ~~~~~~~~~~~~~~~~~~~~~ ^ drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around the '|' expression to silence this warning data->div[i].critical ? ^ ) drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around the '?:' expression to evaluate it first data->div[i].critical ? ^ ( 1 warning generated. It appears that the intention was for ?: to be evaluated first so that CLK_IS_CRITICAL could be added to clkflags if the critical boolean was set; right now, | is being evaluated first. Add parentheses around the ?: block to have it be evaluated first. Fixes: 9919d44f ("clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks") Link: https://github.com/ClangBuiltLinux/linux/issues/745Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 658fd65c ] It is not allowed to sleep to early in the boot process and this may lead to kernel issues if the bootloader didn't prepare the slow clock and main clock. This results in the following error and dump stack on the AriettaG25: bad: scheduling from the idle thread! Ensure it is possible to sleep, else simply have a delay. Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20190920153906.20887-1-alexandre.belloni@bootlin.com Fixes: 80eded6c ("clk: at91: add slow clks driver") Tested-by:
-
Randy Dunlap authored
[ Upstream commit f430c7ed ] Add a missing short description to the reset_control_ops documentation. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> [p.zabel@pengutronix.de: rebased and updated commit message] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 7e5d0bf6 ] Since commit a211b8c5 ("ARM: dts: imx6qdl-sabreauto: Add sensors") a storm of accelerometer interrupts is seen: [ 114.211283] irq 260: nobody cared (try booting with the "irqpoll" option) [ 114.218108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.4 #1 [ 114.223960] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 114.230531] [<c0112858>] (unwind_backtrace) from [<c010cdc8>] (show_stack+0x10/0x14) [ 114.238301] [<c010cdc8>] (show_stack) from [<c0c1aa1c>] (dump_stack+0xd8/0x110) [ 114.245644] [<c0c1aa1c>] (dump_stack) from [<c0193594>] (__report_bad_irq+0x30/0xc0) [ 114.253417] [<c0193594>] (__report_bad_irq) from [<c01933ac>] (note_interrupt+0x108/0x298) [ 114.261707] [<c01933ac>] (note_interrupt) from [<c018ffe4>] (handle_irq_event_percpu+0x70/0x80) [ 114.270433] [<c018ffe4>] (handle_irq_event_percpu) from [<c019002c>] (handle_irq_event+0x38/0x5c) [ 114.279326] [<c019002c>] (handle_irq_event) from [<c019438c>] (handle_level_irq+0xc8/0x154) [ 114.287701] [<c019438c>] (handle_level_irq) from [<c018eda0>] (generic_handle_irq+0x20/0x34) [ 114.296166] [<c018eda0>] (generic_handle_irq) from [<c0534214>] (mxc_gpio_irq_handler+0x30/0xf0) [ 114.304975] [<c0534214>] (mxc_gpio_irq_handler) from [<c0534334>] (mx3_gpio_irq_handler+0x60/0xb0) [ 114.313955] [<c0534334>] (mx3_gpio_irq_handler) from [<c018eda0>] (generic_handle_irq+0x20/0x34) [ 114.322762] [<c018eda0>] (generic_handle_irq) from [<c018f3ac>] (__handle_domain_irq+0x64/0xe0) [ 114.331485] [<c018f3ac>] (__handle_domain_irq) from [<c05215a8>] (gic_handle_irq+0x4c/0xa8) [ 114.339862] [<c05215a8>] (gic_handle_irq) from [<c0101a70>] (__irq_svc+0x70/0x98) [ 114.347361] Exception stack(0xc1301ec0 to 0xc1301f08) [ 114.352435] 1ec0: 00000001 00000006 00000000 c130c340 00000001 c130f688 9785636d c13ea2e8 [ 114.360635] 1ee0: 9784907d 0000001a eaf99d78 0000001a 00000000 c1301f10 c0182b00 c0878de4 [ 114.368830] 1f00: 20000013 ffffffff [ 114.372349] [<c0101a70>] (__irq_svc) from [<c0878de4>] (cpuidle_enter_state+0x168/0x5f4) [ 114.380464] [<c0878de4>] (cpuidle_enter_state) from [<c08792ac>] (cpuidle_enter+0x28/0x38) [ 114.388751] [<c08792ac>] (cpuidle_enter) from [<c015ef9c>] (do_idle+0x224/0x2a8) [ 114.396168] [<c015ef9c>] (do_idle) from [<c015f3b8>] (cpu_startup_entry+0x18/0x20) [ 114.403765] [<c015f3b8>] (cpu_startup_entry) from [<c1200e54>] (start_kernel+0x43c/0x500) [ 114.411958] handlers: [ 114.414302] [<a01028b8>] irq_default_primary_handler threaded [<fd7a3b08>] mma8452_interrupt [ 114.422974] Disabling IRQ #260 CPU0 CPU1 .... 260: 100001 0 gpio-mxc 31 Level mma8451 The MMA8451 interrupt triggers as low level, so the GPIO6_IO31 pin needs to activate its pull up, otherwise it will stay always at low level generating multiple interrupts. The current device tree does not configure the IOMUX for this pin, so it uses whathever comes configured from the bootloader. The IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK register value comes as 0x8000 from the bootloader, which has PKE bit cleared, hence disabling the pull-up. Instead of relying on a previous configuration from the bootloader, configure the GPIO6_IO31 pin with pull-up enabled in order to fix this problem. Fixes: a211b8c5 ("ARM: dts: imx6qdl-sabreauto: Add sensors") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-By:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 67d33aec ] Keeping the IRQ chip definition static shares it with multiple instances of the GPIO chip in the system. This is bad and now we get this warning from GPIO library: "detected irqchip that is shared with multiple gpiochips: please fix the driver." Hence, move the IRQ chip definition from being driver static into the struct intel_pinctrl. So a unique IRQ chip is used for each GPIO chip instance. This patch is heavily based on the attachment to the bug by Christoph Marz. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=202543 Fixes: 6e08d6bb ("pinctrl: Add Intel Cherryview/Braswell pin controller support") Depends-on: 83b9dc11 ("pinctrl: cherryview: Associate IRQ descriptors to irqdomain") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit e9323b66 ] Properly save and restore all top PLL related configuration registers during suspend/resume cycle. So far driver only handled EPLL and RPLL clocks, all other were reset to default values after suspend/resume cycle. This caused for example lower G3D (MALI Panfrost) performance after system resume, even if performance governor has been selected. Reported-by:
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Fixes: 77342432 ("clk: samsung: exynos5420: add more registers to restore list") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Russell King authored
[ Upstream commit dc39596a ] The devm conversion of kirkwood was incorrect; on removal, devm takes effect after the "remove" function has returned. So, the effect of the conversion was to change the order during remove from: - snd_soc_unregister_component() (unpublishes interfaces) - clk_disable_unprepare() - cleanup resources After the conversion, this became: - clk_disable_unprepare() - while the device may still be active - snd_soc_unregister_component() - cleanup resources Hence, it introduces a bug, where the internal clock for the device may be shut down before the device itself has been shut down. It is known that Marvell SoCs, including Dove, locks up if registers for a peripheral that has its clocks disabled are accessed. Fixes: f98fc0f8 ("ASoC: kirkwood: replace platform to component") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1iNGyP-0004oN-BA@rmk-PC.armlinux.org.ukSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Russell King authored
[ Upstream commit 4523817d ] When our call to get the external clock fails, we forget to clean up the enabled internal clock correctly. Enable the clock after we have obtained all our resources. Fixes: 84aac6c7 ("ASoC: kirkwood: fix loss of external clock at probe time") Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit faac3604 ] Add checking the value returned by samsung_clk_alloc_reg_dump() and devm_kcalloc(). While fixing this, also release all gathered clocks. Fixes: 523d3de4 ("clk: samsung: exynos5433: Add support for runtime PM") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> [s.nawrocki: squashed patch from K. Kozlowski adding missing slab.h header] Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit 532f9cd6 ] Memory allocated for 'struct reset_control_array' in of_reset_control_array_get() is never freed in reset_control_array_put() resulting in kmemleak showing the following backtrace. backtrace: [<00000000c5f17595>] __kmalloc+0x1b0/0x2b0 [<00000000bd499e13>] of_reset_control_array_get+0xa4/0x180 [<000000004cc02754>] 0xffff800008c669e4 [<0000000050a83b24>] platform_drv_probe+0x50/0xa0 [<00000000d3a0b0bc>] really_probe+0x108/0x348 [<000000005aa458ac>] driver_probe_device+0x58/0x100 [<000000008853626c>] device_driver_attach+0x6c/0x90 [<0000000085308d19>] __driver_attach+0x84/0xc8 [<00000000080d35f2>] bus_for_each_dev+0x74/0xc8 [<00000000dd7f015b>] driver_attach+0x20/0x28 [<00000000923ba6e6>] bus_add_driver+0x148/0x1f0 [<0000000061473b66>] driver_register+0x60/0x110 [<00000000c5bec167>] __platform_driver_register+0x40/0x48 [<000000007c764b4f>] 0xffff800008c6c020 [<0000000047ec2e8c>] do_one_initcall+0x5c/0x1b0 [<0000000093d4b50d>] do_init_module+0x54/0x1d0 Fixes: 17c82e20 ("reset: Add APIs to manage array of resets") Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Xiaojun Sang authored
[ Upstream commit d3645b05 ] Parameter fragments and fragment_size are type of u32. U32_MAX is the correct check. Signed-off-by:
Xiaojun Sang <xsang@codeaurora.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191021095432.5639-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Stephan Gerhold authored
[ Upstream commit 9110d1b0 ] According to the PM8916 Hardware Register Description, CDC_D_CDC_CONN_HPHR_DAC_CTL has only a single bit (RX_SEL) to switch between RX1 (0) and RX2 (1). It is not possible to disable it entirely to achieve the "ZERO" state. However, at the moment the "RDAC2 MUX" mixer defines three possible values ("ZERO", "RX2" and "RX1"). Setting the mixer to "ZERO" actually configures it to RX1. Setting the mixer to "RX1" has (seemingly) no effect. Remove "ZERO" and replace it with "RX1" to fix this. Fixes: 585e881e ("ASoC: codecs: Add msm8916-wcd analog codec") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Acked-by:
-
Fabien Parent authored
[ Upstream commit 41d49e79 ] When timer_of_init fails, it cleans up after itself by undoing everything it did during the initialization function. mtk_syst_init and mtk_gpt_init both call timer_of_cleanup if timer_of_init fails. timer_of_cleanup try to release the resource taken. Since these resources have already been cleaned up by timer_of_init, we end up getting a few warnings printed: [ 0.001935] WARNING: CPU: 0 PID: 0 at __clk_put+0xe8/0x128 [ 0.002650] Modules linked in: [ 0.003058] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.67+ #1 [ 0.003852] Hardware name: MediaTek MT8183 (DT) [ 0.004446] pstate: 20400085 (nzCv daIf +PAN -UAO) [ 0.005073] pc : __clk_put+0xe8/0x128 [ 0.005555] lr : clk_put+0xc/0x14 [ 0.005988] sp : ffffff80090b3ea0 [ 0.006422] x29: ffffff80090b3ea0 x28: 0000000040e20018 [ 0.007121] x27: ffffffc07bfff780 x26: 0000000000000001 [ 0.007819] x25: ffffff80090bda80 x24: ffffff8008ec5828 [ 0.008517] x23: ffffff80090bd000 x22: ffffff8008d8b2e8 [ 0.009216] x21: 0000000000000001 x20: fffffffffffffdfb [ 0.009914] x19: ffffff8009166180 x18: 00000000002bffa8 [ 0.010612] x17: ffffffc012996980 x16: 0000000000000000 [ 0.011311] x15: ffffffbf004a6800 x14: 3536343038393334 [ 0.012009] x13: 2079726576652073 x12: 7eb9c62c5c38f100 [ 0.012707] x11: ffffff80090b3ba0 x10: ffffff80090b3ba0 [ 0.013405] x9 : 0000000000000004 x8 : 0000000000000040 [ 0.014103] x7 : ffffffc079400270 x6 : 0000000000000000 [ 0.014801] x5 : ffffffc079400248 x4 : 0000000000000000 [ 0.015499] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.016197] x1 : ffffff80091661c0 x0 : fffffffffffffdfb [ 0.016896] Call trace: [ 0.017218] __clk_put+0xe8/0x128 [ 0.017654] clk_put+0xc/0x14 [ 0.018048] timer_of_cleanup+0x60/0x7c [ 0.018551] mtk_syst_init+0x8c/0x9c [ 0.019020] timer_probe+0x6c/0xe0 [ 0.019469] time_init+0x14/0x44 [ 0.019893] start_kernel+0x2d0/0x46c [ 0.020378] ---[ end trace 8c1efabea1267649 ]--- [ 0.020982] ------------[ cut here ]------------ [ 0.021586] Trying to vfree() nonexistent vm area ((____ptrval____)) [ 0.022427] WARNING: CPU: 0 PID: 0 at __vunmap+0xd0/0xd8 [ 0.023119] Modules linked in: [ 0.023524] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.67+ #1 [ 0.024498] Hardware name: MediaTek MT8183 (DT) [ 0.025091] pstate: 60400085 (nZCv daIf +PAN -UAO) [ 0.025718] pc : __vunmap+0xd0/0xd8 [ 0.026176] lr : __vunmap+0xd0/0xd8 [ 0.026632] sp : ffffff80090b3e90 [ 0.027066] x29: ffffff80090b3e90 x28: 0000000040e20018 [ 0.027764] x27: ffffffc07bfff780 x26: 0000000000000001 [ 0.028462] x25: ffffff80090bda80 x24: ffffff8008ec5828 [ 0.029160] x23: ffffff80090bd000 x22: ffffff8008d8b2e8 [ 0.029858] x21: 0000000000000000 x20: 0000000000000000 [ 0.030556] x19: ffffff800800d000 x18: 00000000002bffa8 [ 0.031254] x17: 0000000000000000 x16: 0000000000000000 [ 0.031952] x15: ffffffbf004a6800 x14: 3536343038393334 [ 0.032651] x13: 2079726576652073 x12: 7eb9c62c5c38f100 [ 0.033349] x11: ffffff80090b3b40 x10: ffffff80090b3b40 [ 0.034047] x9 : 0000000000000005 x8 : 5f5f6c6176727470 [ 0.034745] x7 : 5f5f5f5f28282061 x6 : ffffff80091c86ef [ 0.035443] x5 : ffffff800852b690 x4 : 0000000000000000 [ 0.036141] x3 : 0000000000000002 x2 : 0000000000000002 [ 0.036839] x1 : 7eb9c62c5c38f100 x0 : 7eb9c62c5c38f100 [ 0.037536] Call trace: [ 0.037859] __vunmap+0xd0/0xd8 [ 0.038271] vunmap+0x24/0x30 [ 0.038664] __iounmap+0x2c/0x34 [ 0.039088] timer_of_cleanup+0x70/0x7c [ 0.039591] mtk_syst_init+0x8c/0x9c [ 0.040060] timer_probe+0x6c/0xe0 [ 0.040507] time_init+0x14/0x44 [ 0.040932] start_kernel+0x2d0/0x46c This commit remove the calls to timer_of_cleanup when timer_of_init fails since it is unnecessary and actually cause warnings to be printed. Fixes: a0858f93 ("mediatek: Convert the driver to timer-of") Signed-off-by:
Fabien Parent <fparent@baylibre.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/linux-arm-kernel/20190919191315.25190-1-fparent@baylibre.com/Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 44b09b11 ] The meson-saradc driver manually sets the input clock for sar_adc_clk_sel. Update the GXBB clock driver (which is used on GXBB, GXL and GXM) so the rate settings on sar_adc_clk_div are propagated up to sar_adc_clk_sel which will let the common clock framework select the best matching parent clock if we want that. This makes sar_adc_clk_div consistent with the axg-aoclk and g12a-aoclk drivers, which both also specify CLK_SET_RATE_PARENT. Fixes: 33d0fcdf ("clk: gxbb: add the SAR ADC clocks and expose them") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
- 01 Dec, 2019 16 commits
-
-
Greg Kroah-Hartman authored
-
Ezequiel Garcia authored
commit 7544fd7f upstream. A bit unexpectedly (but still documented), request_module may return a positive value, in case of a modprobe error. This is currently causing issues in the devfreq framework. When a request_module exits with a positive value, we currently return that via ERR_PTR. However, because the value is positive, it's not a ERR_VALUE proper, and is therefore treated as a valid struct devfreq_governor pointer, leading to a kernel oops. Fix this by returning -EINVAL if request_module returns a positive value. Fixes: b53b0128 ("PM / devfreq: Fix static checker warning in try_then_request_governor") Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit af2e8c68 upstream. On some systems that are vulnerable to Spectre v2, it is up to software to flush the link stack (return address stack), in order to protect against Spectre-RSB. When exiting from a guest we do some house keeping and then potentially exit to C code which is several stack frames deep in the host kernel. We will then execute a series of returns without preceeding calls, opening up the possiblity that the guest could have poisoned the link stack, and direct speculative execution of the host to a gadget of some sort. To prevent this we add a flush of the link stack on exit from a guest. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [dja: straightforward backport to v4.19] Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Michael Ellerman authored
commit 39e72bf9 upstream. In commit ee13cb24 ("powerpc/64s: Add support for software count cache flush"), I added support for software to flush the count cache (indirect branch cache) on context switch if firmware told us that was the required mitigation for Spectre v2. As part of that code we also added a software flush of the link stack (return address stack), which protects against Spectre-RSB between user processes. That is all correct for CPUs that activate that mitigation, which is currently Power9 Nimbus DD2.3. What I got wrong is that on older CPUs, where firmware has disabled the count cache, we also need to flush the link stack on context switch. To fix it we create a new feature bit which is not set by firmware, which tells us we need to flush the link stack. We set that when firmware tells us that either of the existing Spectre v2 mitigations are enabled. Then we adjust the patching code so that if we see that feature bit we enable the link stack flush. If we're also told to flush the count cache in software then we fall through and do that also. On the older CPUs we don't need to do do the software count cache flush, firmware has disabled it, so in that case we patch in an early return after the link stack flush. The naming of some of the functions is awkward after this patch, because they're called "count cache" but they also do link stack. But we'll fix that up in a later commit to ease backporting. This is the fix for CVE-2019-18660. Reported-by:
Anthony Steinhauser <asteinhauser@google.com> Fixes: ee13cb24 ("powerpc/64s: Add support for software count cache flush") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Christopher M. Riedl authored
commit d8f0e0b0 upstream. Add support for disabling the kernel implemented spectre v2 mitigation (count cache flush on context switch) via the nospectre_v2 and mitigations=off cmdline options. Suggested-by:
Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
Bernd Porr authored
commit 5618332e upstream. The userspace comedilib function 'get_cmd_generic_timed' fills the cmd structure with an informed guess and then calls the function 'usbduxfast_ai_cmdtest' in this driver repeatedly while 'usbduxfast_ai_cmdtest' is modifying the cmd struct until it no longer changes. However, because of rounding errors this never converged because 'steps = (cmd->convert_arg * 30) / 1000' and then back to 'cmd->convert_arg = (steps * 1000) / 30' won't be the same because of rounding errors. 'Steps' should only be converted back to the 'convert_arg' if 'steps' has actually been modified. In addition the case of steps being 0 wasn't checked which is also now done. Signed-off-by:
Bernd Porr <mail@berndporr.me.uk> Cc: <stable@vger.kernel.org> # 4.4+ Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191118230759.1727-1-mail@berndporr.me.ukSigned-off-by:
-
Aleksander Morgado authored
commit f0797095 upstream. These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The device exposes AT, NMEA and DIAG ports in both USB configurations. P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> [ johan: drop id defines ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Aleksander Morgado authored
commit 957c31ea upstream. The device exposes AT, NMEA and DIAG ports in both USB configurations. Exactly same layout as the default DW5821e module, just a different vid/pid. P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
-
Johan Hovold authored
commit 92fe35fb upstream. The driver was setting the device remote-wakeup feature during probe in violation of the USB specification (which says it should only be set just prior to suspending the device). This could potentially waste power during suspend as well as lead to spurious wakeups. Note that USB core would clear the remote-wakeup feature at first resume. Fixes: 3f542974 ("USB: Moschip 7840 USB-Serial Driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Reviewed-by:
-
Johan Hovold authored
commit ea422312 upstream. The driver was setting the device remote-wakeup feature during probe in violation of the USB specification (which says it should only be set just prior to suspending the device). This could potentially waste power during suspend as well as lead to spurious wakeups. Note that USB core would clear the remote-wakeup feature at first resume. Fixes: 0f64478c ("USB: add USB serial mos7720 driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Reviewed-by:
-
Pavel Löbl authored
commit e696d00e upstream. Add USB ID for MOXA UPort 2210. This device contains mos7820 but it passes GPIO0 check implemented by driver and it's detected as mos7840. Hence product id check is added to force mos7820 mode. Signed-off-by:
Pavel Löbl <pavel@loebl.cz> Cc: stable <stable@vger.kernel.org> [ johan: rename id defines and add vendor-id check ] Signed-off-by:
-
Oliver Neukum authored
commit 91feb015 upstream. The work item can operate on 1. stale memory left over from the last transfer the actual length of the data transfered needs to be checked 2. memory already freed the error handling in appledisplay_probe() needs to cancel the work in that case Reported-and-tested-by: syzbot+495dab1f175edc9c2f13@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106124902.7765-1-oneukum@suse.comSigned-off-by:
-
Oliver Neukum authored
commit 92aa5986 upstream. In case of a timeout or if a signal aborts a read communication with the device needs to be ended lest we overwrite an active URB the next time we do IO to the device, as the URB may still be active. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191107142856.16774-1-oneukum@suse.comSigned-off-by:
-
Greg Kroah-Hartman authored
commit 347bc8cb upstream. Add support for the Mark-10 digital force gauge device to the cp201x driver. Based on a report and a larger patch from Joel Jennings Reported-by:
Joel Jennings <joel.jennings@makeitlabs.com> Cc: stable <stable@vger.kernel.org> Acked-by:
-
Suwan Kim authored
commit 2a912531 upstream. Smatch reported that nents is not initialized and used in stub_recv_cmd_submit(). nents is currently initialized by sgl_alloc() and used to allocate multiple URBs when host controller doesn't support scatter-gather DMA. The use of uninitialized nents means that buf_len is zero and use_sg is true. But buffer length should not be zero when an URB uses scatter-gather DMA. To prevent this situation, add the conditional that checks buf_len and use_sg. And move the use of nents right after the sgl_alloc() to avoid the use of uninitialized nents. If the error occurs, it adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be released by stub event handler and connection will be shut down. Fixes: ea44d190 ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Suwan Kim <suwan.kim027@gmail.com> Acked-by:
Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111141035.27788-1-suwan.kim027@gmail.comSigned-off-by:
-
Hewenliang authored
commit 26a4d4c0 upstream. We should close the fd before the return of read_attr_usbip_status. Fixes: 3391ba0e ("usbip: tools: Extract generic code to be shared with vudc backend") Signed-off-by:
Hewenliang <hewenliang4@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191025043515.20053-1-hewenliang4@huawei.comSigned-off-by:
-
